Is there a "run once" buttons in labview? (the likes of buttons in VB.)
In VB, a button may be able to exucute a task or command once pressed, in other words, we cannot hold this button as in the following case:
Command1_Click()
Text3 = text1 and Text2
Note that if the form is still running and yo add new numbers to text1 and text2, Text3 no is not updated unless the command button is pressed once more.
Unfortunately in LabVIEW, the only buttons that I know are boolean, they seem to be depressed when you press or locked, take him when new numbers are inserted in the digital controls and mouse button anywhere on the front panel (when running vi) the indicator is automatically updated.
So is it that run all of the buttons once?
It's a little difficult to understand the problem, maybe you can post a LV code that does not work as you wish.
I guess you get the following error: you did not read the terminal of the button. If a button (mechanical action) is set to 'Latch releasing' (default), as soon as you read the terminal it snaps again.
Felix
Tags: NI Software
Similar Questions
-
case structure: to run once when the condition is true
I have a case structure in my program. I use this to count the number of cycles in my experience. I have a knot of feedback (image of the program here attaced) within a box structure. I want the case structure to run only ONCE when the condition is "TRUE". Each "TRUE" represents each cycle. The problem that I'm facing here is that the box structure is permanently running as long as it is 'TRUE' instead of running once and wait for the next 'TRUE '.
Temporaritly I use a timer inside (as you can see in the picture) to contain the program for the next 'REAL' to come. I hold as by case so I know exactly the time. Is it possible to make the case structure running only once when the condition become ' TRUE and wait for the next "REAL"? OR is there any other loop that case structure that make this work?
Hi aneps,
PtByPt_BooleanCrossing is your friend!
You really need to work on the analysis/description of your problem: you don't want to run the case as long as the entry is set to TRUE, but you want to run the case at the entrance of the past from FALSE to TRUE!
-
procedure to run every month only once if I press the button
Hi........
I want to run the procedure every month once, if I press the new button in the same month I want displaying the message "executed procedure.
in fact I used the function procedure when the shutter release button
I wrote this code
Declare
number of v_months;
date of T_DATE;
Start
v_months: = 0;
SELECT TO_CHAR (ADD_MONTHS(sysdate,v_months), 'DD-MON-YYYY') in the T_DATE FROM DUAL;
If T_DATE = sysdate and: CONTROL_1.COST_AFTER_DEPR is not null then
DEPRECIATE_PKG.main;
elsif: CONTROL. ASSET_GROUP is null then
fnd_message.set_string ("asset is not available");
fnd_message. Show();
raise form_trigger_failure;
elsif: CONTROL_1.COST_AFTER_DEPR = 0 then
fnd_message.set_string ("' complete depreciation");
fnd_message. Show();
raise form_trigger_failure;
end if;
end;
How can I please give me a solution
Concerning
MahaHello
You should have a database table to store the fact that the procedure was performed for a given month:
create table t_monthly_procedure ( ddate date )
If the procedure was executed this month then test in your code. Otherwise, you insert a row
Declare ln$dummy pls_integer; Begin select 1 into ln$dummy where exists ( select 1 from t_monthly_procedure where to_char(ddate,'YYYYMM') = to_char(sysdate,'YYYYMM') ); -- found ? -- -- do nothing or raise a message -- Exception when no_data_found then -- nothing done for this month, so insert -- insert into t_monthly_procedure (ddate) values (sysdate) ; End;
François
-
Hello
I am currently looking to browse hundreds of text files my VI to run the VI once and having labview to open each text file in the order numberical that are contained in a single folder.
In general, I ran each file one at a time through the VI, hours to browse all text files. I'm wondering if there is a way I can specify a target folder and then open each text file in the target folder and walked through my VI in numberical order (each file is located in the order that is MM_01, MM_02, MM_03...). Currently I open a file at the same time, through "the spreadsheet read", then the index table, and then run through filters etc to get the data I need. I hope there is a way to do it, because he will save days of work.
Thanks in advance for your help.
-
Completed the status and run once a sequence
Hey guys,.
In my script, I run a Labiew VI with a button but also continue a button "Cancel". I want this button when press to stop running and go directly to cleaning with a status of "completed."
My VI, when the button cancel is pushed to send in the State "Done" chain, but after that I don't know how it interface with Teststand and the property of the step.
can someone help me on this topic?
second topic: I had a loop and inside I want some sup sequences to run only once, is it a good which can allow me to control this?
Thanks in advance!
Hi pfhenry,
I'm not sure what you mean by your first point, but I've linked a KB that tells you how you are able to implement a feature similar to the one you described.
What concerns your second point, you can create a variable for transmitting data of LabVIEW, TestStand, and then tab Module step that calls the VI you can load the value of the VI in the variable you created. I have attached a screenshot showing an implementation of the present.
Just to clarify your query in a loop, do you have a subsequence TestStand, you want to call once and then ignore the subsequence for each iteration of the loop after the first call?
Kind regards
Steve
-
Rule of busyness running ONCE on load
I have a question, there is a condition of busyness "run when loading" rule, but I noticed that this rule of the bustle runs every time when a button 'go' rule runs once again, is it possible to enforce the rule onle times when the form loads first?If you click go to my opinion, that the form is actually to take again with the new selections on the form, which is to take the business rule triggers.
See you soon
John
http://John-Goodwin.blogspot.com/ -
Time for a while loop to run once
Hello guys,.
I want to measure the time for a while loop to run once. There is a piece of code raised. So I just created a simple VI to try, please let me know which is the right way to do it?
And I wondered, when I run the VI without highlighting the execution, he wouldn't give me a number, maybe it's because the code is simple and really fast? I have to highlight all the time?
Thank you
Not quite right. Both get primitive value time will run at the same time. use an image sequence to force the order of execution, as shown. I also brought in the relitve of accuracy seconds vi of VI. LIB\utilities because it depends on the clock of the system rather than the mSec timer accuracy.
-
Loading and running scripts consecutive in LabVIEW
Hello
I would like to start by saying that I am very new to LabVIEW so I apologize for questions that should seem obvious. In addition, when you answer please don't forget I am unfamiliar as I want to be with LabVIEW in general. I recently had a problem on my desktop to add features to a VI preexiting, quite complex. The solution seems to be in scripts. However, a script more 55 loading lines gives an error (is this normal? Is there a way around it?). The problem is fairly easy to break into small pieces, so that the script has been divided into several smaller parts which offer the same functions when run consecutively. After each script execution, the system will take time to process (up to 300 ms, IIRC) and assert a bit ready when you are finished. Using this ready signal as a trigger, I want to run the following script.
Scripts are read correctly in the program using "niHSDIO Script.vi of Scripture" and can be selected by hardcode the name of the 'script' in 'Configure Script niHSDIO to Generate.vi'. It will run all the scripts successfully of when hardcoded, but trying to call the following script (script names stored in a table and incremented with a while loop) an error is given:
Error - 1074118651 occurred at niHSDIO Write Script.vi Possible reason(s): Driver Status: (Hex 0xBFFA4005) You cannot perform this action while the session is in the running state.
At this point, I read quite a bit online and in the documentation to trying to find a way to suspend, interrupt, etc. the State to allow another script load, but I have not been able to understand.
On the other hand, if there is a way to load a script of arbitrary length, I think that can solve my problem as well. Please let me know what additional information may be required to help solve this, I am sure that I left out all the good bits.
Thank you in advance,
Landon
Edited for clarity.
Oops... Here is the link to the white paper:
http://www.NI.com/white-paper/7283/en/
See you soon,.
-
run a VI in labview with Vision Builder (VBAI)
HELO,
I try to use the 'run VI' tool of the vbai (2010). When I lunch the inspection on my PC (with labview 2010) it's ok, but on another PC (without labview), I got an error message (dll is missing).
I have to copy the data in a specific folder to use this tool?
You have solutions to solve my problem?
Thank you
Ulysses
If you read the context-sensitive help for the LabVIEW execution step, there will be clear instructions to operate the LLB for Vision Builder AI. I'm not including instructions here because they change slightly depending on the version of the VBAI you are using. However, here are some useful links:
http://digital.NI.com/public.nsf/allkb/231D87B9D8C3B71A862572D4007EAAF8
Access the LabVIEW execution step in VBAI, change it, then go to the help > show contextual help (Ctrl-H). In the FAQ tab, there will be a link to describe in detail how to build your LLB for distribution... read carefully and follow the directions.
Hope this helps,
Brad
-
Impossible to get "Run once" to do something
This should be easy. I was hitting my head all afternoon on that.
VC 2.5 ESX 3.5
I have a Windows 2003 server model that we deploy. I would like to issue a command "Run once". Nothing seems to work.
I tried the following:
Regedit /s /d "HKEY_LOCAL_MACHINE\SOFTWARE\Network Associates\ePolicy Orchestrator\Agent\AgentGUID"
Regedit /s /d "HKEY_LOCAL_MACHINE\SOFTWARE\Network Associates\ePolicy Orchestrator\Agent\MACADDRESS"
I tried to put it in a file bat and use:
C:\Utilities\RunOnce.bat & gt; C:\Utilities\RunOnce.out.txt 2 & gt; & 1
I prefer the .bat file method would work. I have tried many variations and other very simple commands. This very simple concept I'm missing here? Is there a log somewhere that I can use to see if there are errors?
Fowler
Wrong key.
HKLM, Software\Microsoft\Windows\CurrentVersion\RunOnce\Setup
http://www.Microsoft.com/technet/prodtechnol/ie/ieak/techinfo/deploy/60/en/Infrunon.mspx?mfr=true
-
RAM preview will not stop running once?
I'm obviously trying to RAM Preview a project and for some reason any now when I run the RAM Preview... it will run through... and once it gets to the end, he makes a loop and performs a loop and loops. Not normally a big problem since I was usually able to stop with one of the other Preview button or a button ESC or something. For some reason any now... nothing that I don't constantly RAM Preview. The only thing I can do is a ctrl + alt + delete to stop it (not really closing After Effects, just the simple fact to bring up Task Manager to stop it). Any ideas of what I could have pushed, what could happen?
Well... seems to have fixed itself, I don't know what happened. Thanks anyway.
-
Send no button when composing an email
When the Send button changes to send later, he indicates that Thunderbird is in offline mode.
It is taken offline for several reasons. You said that he or she has detected a loss of network connection. Happens frequently on a laptop because the NICs tend to shut down when the laptop goes to sleep.
There is an indicator online / offline in the lower left corner of the window of Thunderbird. It looks like 2 computer screens. When there is a red cross on Thunderbird is in offline mode.
You can click on this icon to change state. I suggest you do this next time instead of blindly clicking on buttons that you don't remember.The Send button is the Composition toolbar in the window of writing.
Open a window of writing.
If you've managed to disable the also menu bar press the alt key to bring up.
The menu bar, select View-Toolbars and relight the toolbars. -
Is there a quick delete button that can be added next to emails?
During playback by emails in Thunderbird there are emails that I know I want to read and remove enough quickly without having to click on the email itself.
What I'm looking for, it's a quick delete button similar to the 'star' button that can be added as a column. I would like a button which is located near the titles of message in the e-mail pane that allows me to quickly delete messages.
Microsoft Outlook (windows mail) has something like that on all messages and I would if this feature could be reproduced in Thunderbird.
It's not Outlook and there is not this button. Right click - Delete the Message
-
I want to purchase items on my wish list. There is no buy button
I want to purchase items on my wish list. There is no buy button.
Please specify which product Apple (iTunes Store, App Store) is involved.
-
I couldn't finish the sentence. After the function, it should read "there is a reply button that sends an email and I get an automatic response from Andy Halford saying that he cannot help, addons have been removed for a long time"
I do not appear to feel the addons indicated on its website.
I want to get rid of the popup - it only showed up after I upgraded to Firefox 25.0See this support article to help understand which extension is the cause of this message is displayed.
http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+themes
Maybe you are looking for
-
Since I've updated, Mozilla guard is no longer me connected to my favorite sites.
-
Tecra A8 (PTA83E): no sound after installing XP
Hello. I recently reinstalled Windows XP on my computer.As I have found no driver cd for my computer, I had to use the download section of the driver on this site.But I didn't get my sound card to work. Any known on this problem?It seems that it find
-
How is group a cluster by its name?
I created a group of 2 calculated values (x = r * cos (angle) and y = r * sin (angle) where are and angle are given by sensors (the angle is converted to radians).) The documentation says "right click on the cluster and enter the names (presumably,
-
Hello, just set up a new computer laptop and wanted to reinstall CS5 on it. The system is El capitan. When I finished the download and try to install I got a message saying the installation file is damage and saying it s better power eject it. I trie
-
Removal of the borders of the Section in OBIEE 11 g
Hi gurus,I want to remove the borders of section in the OBIEE.I tried the user border-style: none; It seems to not work. I want to remove the borders for sections permanently. What file I need to change?Thanks in advance for the helpVincent