Rule of busyness running ONCE on load

Similar Questions

• Run the code once when loading the form

  Hi guys,.

  I have a text field (TextField1), which fills with a value (1-100)

  During the initial loading of the form, this value will be the highest.

  When the user navigates around the shape, this number will change (lower than initial load)

  I have another text field (TextField2) on the form I want to keep the original value to the loading of the form.

  something like: TextField2.rawValue = TextField1.rawValue

  But any event that I put in it always updates TextField2 with TextField1 value (not does not run the code once when loading the form)

  Can someone tell how can I do this?

  If the form is loaded with the number 70 as a value in TextField1 - TextField2 has 70 as a value and maintains this value regardless of what TextField1 goes to...

  Thanks a lot for any help

  try putting in the TextField2 docReady event:

  $ = TextField1.rawValue

• Where can I find a list of services that XP Professional needs to start and run successfully without loading unnecessary things?

  I seem to have a long boot of extradanry sequence. I checked with the listing services under administrative tools, and according to the list that appears, I have excess of 127 or so listed services.  Some are in automatic mode, some are on manual, none are disabled.  My question is, where can I find a list of services that XP Professional needs to start and run successfully without loading any of this filth?

  Yes, I understand that some of this "gunk" is things I need for installed applications, but I'll sort that once I put my minimal optimal operating system to boot the system.

  I appreciate the help.

  * original title - "Minimum started for xp services."

  Here is where you can find what services should be automatic, manual, or disabled according to your needs. It is really useful.
  Source: http://ss64.com/nt/syntax-services.html

  I hope that helps!

• case structure: to run once when the condition is true

  I have a case structure in my program. I use this to count the number of cycles in my experience. I have a knot of feedback (image of the program here attaced) within a box structure. I want the case structure to run only ONCE when the condition is "TRUE". Each "TRUE" represents each cycle. The problem that I'm facing here is that the box structure is permanently running as long as it is 'TRUE' instead of running once and wait for the next 'TRUE '.

  Temporaritly I use a timer inside (as you can see in the picture) to contain the program for the next 'REAL' to come. I hold as by case so I know exactly the time. Is it possible to make the case structure running only once when the condition become ' TRUE and wait for the next "REAL"?  OR is there any other loop that case structure that make this work?

  Hi aneps,

  PtByPt_BooleanCrossing is your friend!

  You really need to work on the analysis/description of your problem: you don't want to run the case as long as the entry is set to TRUE, but you want to run the case at the entrance of the past from FALSE to TRUE!

• Time for a while loop to run once

  Hello guys,.

  I want to measure the time for a while loop to run once. There is a piece of code raised. So I just created a simple VI to try, please let me know which is the right way to do it?

  And I wondered, when I run the VI without highlighting the execution, he wouldn't give me a number, maybe it's because the code is simple and really fast? I have to highlight all the time?

  Thank you

  Not quite right.  Both get primitive value time will run at the same time.  use an image sequence to force the order of execution, as shown.  I also brought in the relitve of accuracy seconds vi of VI. LIB\utilities because it depends on the clock of the system rather than the mSec timer accuracy.

  

• Pavilion g6: run once Wrapper

  After that I connected my desktop turns black. The mouse works and I can start the Task Manager. When I delete a process called to run once Wrapper (runonce.exe) I'll be back the normal desktop and PC seems to work OK. I scanned for viruses and malware, no problem. According to HP is this problem caused by a virus.

  Tom

  Hi Tom,

  Right-click on Autoruns and select "Run as Administrator" to launch the application, then Remove the check mark next to the entrance:

  Binkiland c:\users\tom\appdata\roaming\binkiland\updateproc\bkup.dat 2015-02-10 17:05

  Autoruns close and reboot the laptop - it starts on the desktop normally now?

  Kind regards

  DP - K

• RUN DLL error loading C:\Users\Rahul\AppData\Roaming\zljirpe.dll__The specified module could not be found.

  I get the next message after starting my machine.

  RUN DLL error loading C:\Users\Rahul\AppData\Roaming\zljirpe.dll

  The specified module could not be found.

  PL. help me to remove this

  Rahul

  Hello

  Don't forget there is no program can detect or remove all malicious software, so you need to be thorough. Added easy
  to detect and remove malicious software is often accompanied by a much harder to detect and remove the payload. Do
  redundant and thorough work and then use the cleaning methods even if nothing was found. Better to be
  very careful now than to pay a high price later.

  It can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them
  the Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• How to create a task that runs once a day, immediately after the opening of session?

  Hello, I'm wondering how to create a task using the Task Scheduler that runs once a day, immediately after I have logon.

  The reason is I want to use Bing Desktop to change my wallpaper every day. However, I just want to run the first time I start my computer every day, so it will change the wallpaper. By default, it starts whenever I have to logon. It's annoying, because I just want it to start once a day to change the wallpaper. However, using the Task Scheduler, I put only a trigger to start "at the opening of session' or"once a day." If I choose once per day, it runs about 5-10 min after I login, instead of logon immediately after. If I choose the two triggers, then it starts after each session.

  Basically, I just want the Task Scheduler to launch the program after the connection the first time I connect to the computer on any given day. How can I do this?

  Hello Jeffrey,.

  You can refer to the links below and see if that helps.

  Create a task

  http://TechNet.Microsoft.com/en-us/library/cc720110 (v = WS.10) .aspx

  Modify a scheduled task

  http://TechNet.Microsoft.com/en-us/library/cc778308 (v = WS.10) .aspx

  Change an existing task

  http://TechNet.Microsoft.com/en-us/library/cc766442.aspx

  Please write back to us for assistance and we will be happy to help you come.

  Thank you

• Run again full load in OLIVIER 11 g

  Hi all

  We want to re-run the full load in OLIVIER 11 g. Could someone guide me how it is done by OLIVIER 11 g (version ODI). Someone talked about reset in Configuration Manager. No idea how to do this reset?

  Thanks in advance for your help.

  This blog describes how to run the scenario of resetting warehouse in BIACM... Become familiar with Oracle BIACM & WSF

• How can I force DAC to run always full load for one of the task that executes the stored procedure? And remaining tasks load incremental in the second and sub sequent executions.

  Hello

  How can I force DAC to run always full load for one of the task that executes the stored procedure? And remaining tasks load incremental in the second and sub sequent executions.

  Thank you

  Jay.

  Hi if your task is running an informatica mapping you can set your DAC task to run the full mapping for incremental and full loads, so tab task just point to the mapping.

  Hope that helps.

  Thank you

• While you sleep, how the Droid says "full load" status once the loading is done?

  Hello world

  During the load, assuming that I'm not using it for other reasons at the moment, my Droid goes to sleep.  Thus, although it may flash a small green light next to the Power/Lock button if incoming is a message waiting for me, or show a red light it when the battery becomes weak, the droid status 'full charge' somehow like that once the loading is done and if so, how?

  Please note that, Yes, I'm aware that if I use it, the battery indicator screen will be completely green when it is fully charged.  However, I wonder when the Droid is asleep, because I see that the indicator unless I pressed the Power/Lock button to wake up.

  Thank you very much!

  Sincerely,

  Bram Weiser

  Yes it is, but look for.  When you plug it in to charge, you will see a white light where you connect the power cord on the phone.  At full load that the light goes off.  As I said, you'll have to look at the Droid.

• Card rules do not run in the correct order

  Hello
  
  I am using FDM 11.1.2.1.
  
  I imported data and used the card rules: mapping was not what you expected, so I had to modify the sequence of the rules on the map.
  So I updated the sequences of the rules on the map and re-validated (even re-imported) = > I still have the same problem: the card rules do not run in the correct order.
  
  Below is an example of a line imported with this problem:
  
  Export of the import mode:
  PARTITIONKEY | CATKEY | PERIODKEY | ACCOUNT | ENTITY | AMOUNT | * UD5 *.
  749. 12. 2011-03-31 00:00:00 | 60413031 | MM31N0 | 773. * 000000 *.
  
  Rules of the card for the dimension of the UD5 (exported from FDM) (sorry it is not well presented :-/))
  
  %{DIMNAME/} SRCKEY SRCDESC TARGKEY WHERECLAUSETYPE WHERECLAUSEVALUE SEQUENCE VBSCRIPT PARTITIONKEY
  749 UD5 MTN424 project MTN424 MTN424 1
  749 UD5 R_PROJ_AXMECH project AXMECH #SCRIPT IN * 2 * ' * If Left (varValues (15), 2) = "" MM"" Then. "
  
  * Result = ""AXMECH *"
  Else if varValues (15) = "" MSIND0"" Then
  Result = ""AXMECH"
  Else if varValues (15) = "" MSTLP0"" Then
  Result = ""AXMECH"
  End If '.
  UD5 749 * 000000 * project undefined PROJET_NON_DEFINI * 3 *.
  749 UD5 R_PROJ_AUTRES other projects * AS * 4
  
  If despite the sequence 1-2-3-4, the UD5 000000 is mapped to PROJET_NON_DEFINI (rule explicit map with sequence 3) instead of AXMECH (IN the rule of the map with sequence 2).
  
  Thanks in advance for your help
  
  Fanny

  The card sequence numbers have effect in a single mapping type (Explicit, between, in, analogues), not through multiple types of mapping only. Explicit cards always take precedence.

• Impossible to get "Run once" to do something

  This should be easy.  I was hitting my head all afternoon on that.

  VC 2.5 ESX 3.5

  I have a Windows 2003 server model that we deploy.  I would like to issue a command "Run once".  Nothing seems to work.

  I tried the following:

  Regedit /s /d "HKEY_LOCAL_MACHINE\SOFTWARE\Network Associates\ePolicy Orchestrator\Agent\AgentGUID"

  Regedit /s /d "HKEY_LOCAL_MACHINE\SOFTWARE\Network Associates\ePolicy Orchestrator\Agent\MACADDRESS"

  I tried to put it in a file bat and use:

  C:\Utilities\RunOnce.bat & gt; C:\Utilities\RunOnce.out.txt 2 & gt; & 1

  I prefer the .bat file method would work.  I have tried many variations and other very simple commands.  This very simple concept I'm missing here?  Is there a log somewhere that I can use to see if there are errors?

  Fowler

  Wrong key.

  HKLM, Software\Microsoft\Windows\CurrentVersion\RunOnce\Setup

  http://www.Microsoft.com/technet/prodtechnol/ie/ieak/techinfo/deploy/60/en/Infrunon.mspx?mfr=true

• Completed the status and run once a sequence

  Hey guys,. In my script, I run a Labiew VI with a button but also continue a button "Cancel". I want this button when press to stop running and go directly to cleaning with a status of "completed." My VI, when the button cancel is pushed to send in the State "Done" chain, but after that I don't know how it interface with Teststand and the property of the step. can someone help me on this topic? second topic: I had a loop and inside I want some sup sequences to run only once, is it a good which can allow me to control this? Thanks in advance!

  Hi pfhenry,

  I'm not sure what you mean by your first point, but I've linked a KB that tells you how you are able to implement a feature similar to the one you described.

  What concerns your second point, you can create a variable for transmitting data of LabVIEW, TestStand, and then tab Module step that calls the VI you can load the value of the VI in the variable you created. I have attached a screenshot showing an implementation of the present.

  Just to clarify your query in a loop, do you have a subsequence TestStand, you want to call once and then ignore the subsequence for each iteration of the loop after the first call?

  Kind regards

  Steve

• Run DLL, error loading C: / /.

  Error loading C:/Users/username/App Data/Local/KBDBDi.dll

  Help, please

  You could have, or still are, infected by malware; and it could also be a starting top left him entry.

  Malware scan:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight...

   

  How to use Malwarebytes once it is installed and updated:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that thePerform full scan option is selected and then click on theScan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button toview the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the error persists after scanning, use the program to out startup:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configureAutoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

  See you soon.

  Mick Murphy - Microsoft partner