Is there a user space free freeware Oracle DBA?

Similar Questions

• Manual backup for PC. message "there is not enough free space.  My last backup is 1.3 GB, 124 GB available, without encryption.

  Manual backup for PC. message "there is not enough free space.  My last backup was 1.3 GB, four weeks ago.   My disc is 256 GB total with more than 162 GB available.  I do not use encryption. I am running windows 10 with 4 GB of memory system, iOS 9.2.1 and iTunes 12.3.2.35.  The only thing that has changed to realIy is the latest update to iTunes. I found this page and tried the steps.

  If you are unable to make a backup of your iPhone, iPad or iPod touch - Apple Support iTunes

  I cleaned my recycling, did the reboot of my iPhone 5 s and my computer, disconnect all devices except iPhone and mouse, checked my security software (off), reset the lockdown folder.  Uninstalled/reinstalled iTunes 12.3.2.35.  No joy.

  I can do the manual backup on the PC of my wife, and she has more than 500 GB of available and uses the same version of iTunes, but on Windows 7.  Any ideas?

  Is the part of the computer which, by default, stores the backup on a smaller partition by accident?

  The part is \Users\yourusername\appdata\roaming\apple computer\mobilesync\backup.

  If this is not the case, the other thing I guess try would be to temporarily move the backups that exceed in this folder there and test if the prior backup is the problem of not being able to back up now.

• Cannot restore backup because there is not enough free space

  Try to restore from the latest backup and get an error message that there is not enough free space. How can be greater than the capacity of the backup phone? What the user should do?

  How free do to space you have left on the phone?

  Have you tried to transfer the contents of the camera to your Mac and remove the pictures after that in the phone, to get more free space?

  Because the backup will replace the contents of the camera as well, this should be no problem.

  If you want to restore, and then try again.

• Installation problem: (there is not enough free space to store the temporary files of Windows installation)

  I install Windows 7 Ultimate update on Vista Ultimate. Compatibility check says I can go for it.

  I have 348 GB of free space and 2.4 GB of Ram. I run Disk Cleanup and is are free programs on hard drive. When I run the installer, it gives me this message

  There is not enough free space to store the temporary files of Windows installation.

  I'd appreciate any help to overcome this problem.

  Tried the fix you suggested. He changed nothing

  You may be able to mark the partition on which is installed the operating system as being active.

  1. Open Control Panel by clicking the Start button, and then click Control Panel.
  2. Click system and Maintenance.
  3. Click on Administrative Tools.
  4. Double-click computer management. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  5. In the navigation pane, click the disks as storage management.
  6. Select the volume that contains the existing installation of Windows Vista. In general, it is the C drive.
  7. Right-click on the volume and select Mark Partition as Active.
  8. Click Yes to confirm the action.

  Could also contribute to:

  If you have several hard drives remove all except the one that you install Windows 7, and then replace it after Windows 7 is installed.

  Disable startup programs:
  (A) click Start, type MSCONFIG in the search box and press ENTER.
  OK the authorization of user account control and password if necessary
  If you are using XP: click Start, run, and type: MSCONFIG and click OK.
  (B) on the general tab, click Selective startup.
  (C) just below the selective startup, clear the checkbox "Load Startup items".
  (D) click the Services tab, check "Hide all Microsoft Services", and then click Disable all.
  (E) click OK, and then restart the computer.
  (F) try the upgrade again.

  (NOTE: If the upgrade fails and you continue to use your rear security software, then also go back into MSCONFIG and under the general Tower XP/Vista tab, click "Normal startup", and then click OK to exit.)

  Also:

  You need more than half of your drive is empty instead upgrade. If your reader is 1.0 TB (1, 000 GB), you need 500 GB + to be free.

  If you cannot free enough space, you need to move data to external storage.

  Free space - increase the hard disk space

  The following procedure cleans the files associated with your user account. You can also use Disk Cleanup to clean all the files on your computer.

  1. click the button start, in the search box, type disk cleanup, then click Disk Cleanup.
  2. in the drives list, click the drive you want to clean, and then click OK.
  3. on the Disk Cleanup tab, select the types of files to delete.
  Note: To delete all Points except the most recent system restore - click on "Clean up System Files" and you will get another tab called more than Options. Now click More Options, and then click 'Clean up' under ' System Restore and shadow copies "and then confirm the deletion.
  4. click OK at the bottom of the window cleaning disc and in the message that appears, click on delete files.

  Reduce the amount of space allocated to system restore.

  1. start--> panel--> system and safety--> system
  2. then click on the "System Protection" link located at the top left.
  3. in "System Properties" window, click on the "System Protection" tab
  4 locate the 'Settings of Protection' box and select / click on the drive letter (usually c :))
  5. now, click the "Configure" button to change the settings to restore "disk space".
  6. move the cursor to reduce the amount of space system Protection can use (min. 2 GB).
  7. click "Apply" and then the "OK" button after setting the disk space.

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• cannot be synced because there is not enough free space to hold all of the items in the iTunes library

  cannot be synced because there is not enough free space to hold all the items in iTunes (required additional 194.8 MB) library.

  It is not supposed to because I have enough memory on my iPad.

  Help, please

  ckucharek wrote:

  It is not supposed to because I have enough memory on my iPad.

  Not based on what? You have not provided any information as to the amount of space you have left and what is the total capacity of your iPad. He must leave a certain percentage of the free capacity at all times, so if you have a 32GB device and you are up to 2 GB of free storage, which could in fact be severed close... If it says you need to 194.8 MG of free space that would be in addition to the amount that you see as free space.

  It also depends on what you're trying to sync on iTunes as well. What content, apps, songs, etc.

  So... can provide you more details?

• My computer says that there isn't any free space on my cd/dvd driver

  Original title: my computer says that there isn't any free space on my cd/dvd driver. I can't install anything CDs or watching movies. I don't remember when I put anything in this driver. How to free up space.

  My drive dvd/cd-RW watch 623,431,680 bytes or 594 MB. (0 free space). I can not install printer or anything else like movies unless I have free space. I searched and does not know how to do this. Any ideas?

  Hello

  1. Where exactly the watch 0 CD\DVD drive space free?

  I suggest you try to execute this fixit and see if it helps:

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  It will be useful.

• I'm trying to free up some space on my laptop and I noticed that there are a lot of files of programs uninstalled still on it, I was wondering if there is a good free program to install.

  Hi am trying to free up some space on my laptop and I noticed that there are a lot of files of uninstalled programs still on it, I was wondering if there is a good free program to install to get rid of these files or is there any other easy methods I try I wound appreciate the help thanks

  Where are all these files of uninstalled programs located?

  Usually, when you uninstall a program, all files other than the game save files, customizers, or similar are deleted automatically, and those who are 'left' files are usually readily identified you can manually delete directory.

  You can also see if free Revo Uninstaller will help-->

  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  The same page includes a download button for the free trial of the 'Pro' of Revo Uninstaller version (currently $19,62 if you buy it).  Version Pro is said to "Extended searching for leftovers - more advanced scanning algorithms" compared to the free version.

• All files generated by a coil in sqlplus receive ownership of oracle: dba instead of the user of the BONE started sqlplus and run the script. There's a file with users owners of BONES of the coil.

  All files generated by a coil in sqlplus receive ownership of oracle: dba instead of the user of the BONE started sqlplus and run the script. There's a file with users owners of BONES of the coil.

  Script launched in until OS user 'A' on the 'A' server which launches sqlplus, then connects to a remote database through a service of tnsnames.ora as another user of the database and the results of this script are spoulées on the server "A".

  The file queued on the old server is written with rw-rw-r: read write user, group read the writing, reading and possession header that is the user of the OS. The file queued on the new server is written to rw-r-r user: reading writing, reading group, public reading and ownership oracle: dba.

  "" The user then has no privileges to modify the file and continue the process of transmitting the file, editing and deleting the file for the next set of commands. This allows us to keep the possibility to migrate to the new server we are unable to process orders.

  $ORACLE_HOME/bin/sqlplus - s user/password@prd1 @./script/CustomScript/R12_OM_UFPC-oracle.sql

  Background: old server running 4.8, Oracle 10.2.0.4 OEL

  New server running OEL 6.5, Oracle 11.2.0.4

  Tested so far:

  File and update umask to 0002 instead of 0022 is now generated as rw-r-r. However, the property is still oracle: dba.

  Update of ownershipt of $ORACLE_HOME/bin/oracle.exe of oracle: oracle (edi added the user to the oracle group) and chmod 6751 oracle.exe. This created several problems where crucial scripts, that is to say of sqlplus failed to run.

  Added! chmod 755 output.file.name - OS user 'A' is not allowed to change to mod.

  Added! command cp MV output file and that generated the file as a user of the operating system: oracle. It is a potential work around in case of emergency, but the developer would have to rewrite the countless scripts.

  Any ideas?

  I have reproduced the behavior of the old server and am able to spool a file via sqlplus under OS user. No changes have been made on the remote database server. All the changes have been on the new server hosting a small 11.2.0.4 database on a server running OEL 6.5 32 - bit OS.

  (1) removed the sticky bit $ORACLE_HOME/bin/sqlplus using chmod u-s, g-s, o - s suggestion of Billy ~ Verreynne

  (2) modified the main group for the 'oracle' user match the user operating system applications, while maintaining membership in the groups 'oracle' and 'dba '.

  -We are dealing with here EDI processes, so the Group was called edi.

  (3) modified property of the files tnsnames.ora and listener.ora for oracle: edi

  (4) restart the receiver

  (5) disconnect / reconnect

  Script runs as expected, the output file contains the correct ownership and permissions.

  Thank you all for taking a look and offering options.

  -Josh

• VMWare Fusion claiming there is not enough free space

  For some reason any VMWare Fusion I cannot expand my drive saying that there is not enough free space even if I almost free 100gbs. I am able to create a second virtual hard disk without problem.

  

  OSX VMWare 6.0.4 and 10.9.4. Thank you.

  You do not host disk space appropriate to perform a resize or move from a to a disk of type twoGbMaxExtentSparse monolithicSparse and your only option if you cannot release a sufficient amount of space host is temporarily copy the Package to the Virtual Machine on an external drive with enough free disk space to perform a resize or move from a to a disk of type twoGbMaxExtentSparse monolithicSparse and test that everything is correct before copy it back. You must also make sure you have a good backup before conversion of the type of disc or resize and Time machine is not a backup for virtual machines.  In addition, make sure that the virtual machine is stopped, not suspended and VMware Fusion is closed when you are backing up the VM or copy/move the virtual computer.

• is there a registry cleaner free

  Is there a registry cleaner free of Microsoft?

  It has been/is a registry cleaner in Windows Live One Care safety analysis.

  Years, they released a product called RegClean 4 which was necessary to maintain the size of the registry, Win 9 x small enough so that it wouldn't crash the machine. He never removed the safer of the entries, and I guess that the OneCare registry cleaner works in the same direction.

  There are three types of registry cleaner.

  Type #1 does nothing but remove safer entries and has therefore no impact on performance.

  Note that the OneCare cleaner registry is just one part of a major clean-up operation and is not sold as the main element ' go faster '...

  #2 type removes entries more safe but also other flags entered as potential candidates for removal. This type can remove some features because it offers choices that cannot be fully understood by the user of the computer.

  #3 type promises realization just as it was when you were first of all the computer, but this is because the user must run the 'back to the factory' procedure to recover a work computer. In a perverse way, the statements are true, but the method to get '' there '' makes nothing better than scams.

  Microsoft is aware that the register used by Windows 2000 and all derivatives since actually ignore the orphan entries, and the maximum size of the registry is well above what any user could get it.

  If Windows 2000 > registry Gets a big enough mistake, you never get the chance to use a registry cleaner because Windows does not start in any case. Manual registry and reconstruction removal, it is not always successful of success and the amount of commands must be typed exactly, or there is a risk of worse... not that it can do a lot worse than a computer that does not start in the mode of... (-:

  Microsoft also knows what a registry cleaner used on Windows 2000 > can improve performance when used as the only tool.

  To this day, I don't understand why Microsoft never included a registry cleaner in the OnerCare package. All it does is keep the living myth that registry cleaners have value, opening the door to every registry scam cleaner...

  It is best to avoid contact with the registry cleaners.

• Is there a concept like "Impersonation" in Oracle DB?

  Hello

  Is there a concept/feature in databases Oracle which offer the possibility to 'borrow' a user, i.e., log in as a user Oracle DB (a "service account"), but then act as a user different Oracle DB, something similar to what is described here (for SQL Server):

  Context switching or impersonation of database using EXEC AS - of SQL Server performance

  The substance of this issue is that we want apps to be able to connect to an Oracle database as a service account (for example, myserviceaccount) but then to switch the context of a user (for example, in the case of a web application, the user logged on to the web application).

  Is there a way to accomplish something like this in an Oracle database?

  Thank you

  Jim

  The substance of this issue is that we want apps to be able to connect to an Oracle database as a service account (for example, myserviceaccount) but then to switch the context of a user (for example, in the case of a web application, the user logged on to the web application).

  Why? What PROBLEM are you trying to solve?

  What is the purpose to connect as a "service account" (whatever it is) but then acting as another user? Why not just connect as a user?

  Oracle controls the access using privileges. You can grant privileges directly to users, or you can grant privileges to ROLES and then assign one or more roles to a user.

  By default, PL/SQL code, runs as the owner of the code. If a privileged user can create code (default AUTHID DEFINE) and then grant EXECUTE privilege on this code to other users or roles.

  Oracle also supports authentication and proxy connections that allow a user to connect as another user without having to know that another password to users. See examples here:

  http://docs.Oracle.com/CD/B28359_01/Java.111/b31224/proxya.htm

  Post an example that illustrates the reason why you should do what you ask the subject.

• Sporadic emails sent, transmitted mainly from the emails contain this symbol everywhere where there is a space, and the receiver cannot read emails easily

  In the course of the last 3 weeks, forwarded emails mainly, but occasionally sent standard mail are received by the receiver with the included symbol everywhere where there is a space or a comma reversed in the email. The receiver can not easily read the e-mail that there is a working email address, it is very professional. I tried to change the default text encoding, but it makes no difference. Help? I tried to look for an alternative e-mail program, but as a long term user of Thunderbird, I can't find anything that comes even close to it. Please help me find a solution to this problem. Sincerely, Gavin. The example e-mail: subject: Jive

  �

  Hi all

  �

  I m do not know who is testing this Apple, but any comment on his performance in your territory would be appreciated.

  �

  Thank you

  �

  John

  �

  The second e-mail was received and everything seems OK. There is no characters.

  The view source now shows: Content-Transfer-Encoding: City-printable Content-Type: text/plain; charset = utf-8; format = flowed

  Content-Type: multipart/related;

  boundary="------------F73D86391D19EF781844DCB7"
  

  F73D86391D19EF781844DCB7

  Content-Transfer-Encoding: City-printable Content-Type: text/html; charset = utf-8

  So this is now correct as the "quoted-printable" now works.

  If your recipient called 'Claire' can also read all correctly then could mark you my previous comment (which deals with "mail.strictly_mime") as the ' solution '.

• is there a user manual?

  I'm new to Tbird, is there a user manual? A lot of Nice bells and whistles here, just want to know how to use...

  First of all, thanks again for your help. I was unhappy to leave Eudora after so many years, but I see that TB is an excellent program. Also, I think the issue I've had check-in was because of this message "the script is not responding" I got while trying to archive - I can hit the "stop script" without understanding it as TB which is ask the question, so perhaps that it was a human error after all.

• My space free icloud is full, so I want to download all my files on my Mac and use a hard drive instead of icloud. I'm not happy to pay to store my files in icloud. How can I do this?

  My space free icloud is full, so I want to download all my files on my Mac and use a hard drive instead of icloud. I'm not happy to pay to store my files in icloud. How can I do this?

  Welcome to the Apple community.

  Locate in iCloud drive in your Finder, drag to where you want to save them on your Mac, confirm, you want to move them when the Finder prompts.

• How to return to the storage space free level of paid 50G level?

  How to return to the storage space free level of paid 50G level?

  Go to settings > iCloud > storage > managing storage > Downgrade Options.

  Choose the free level, and it will take effect when your plan is in place for the monthly renewal.