Is there a version of Microsoft Greetings Workshop for Windows Vista?

Similar Questions

• Is there a version of space cadet Pinball for Windows 7?

  original title: pinball Space cadet
  Is there a version of space cadet Pinball for Windows 7?

  Europeanonion,
  Yes, you can play Pinball Space Cadet on Windows 7.  If you have a valid copy of XP, you can copy the folder of your XP machine Pinball and put it on your Windows 7 PC.  I found freak out on my XP machine at this location: C:\Program Files\Windows NT\Pinball. * Note that the Program Files folder is a system folder and does not display its contents by default.* * I copied the entire folder and pasted on my Windows 7 box office and it works very well.  However, in mode full screen did not look too good.  I guess that's because I have a big screen and it was not created for these dimensions.  In window mode, it seems fine.  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• What is the latest version of Adobe Flash Player for Windows Vista 64-Bit?

  What is the latest version of Adobe Flash Player for Windows Vista 64-Bit with IE9 I removed my existing Adobe Flash Player and Adobe Flash Player 18 requirements do not have Windows Vista 64 - Bit?

  Thanks in advance!

  Hello

  While 64-bit Vista is not listed on there, the latest version of Flash Player, 18.0.0.160, will always install on it.

  What does "does not average"?  It installs correctly, but the Flash content is not displayed?  Using the browser Internet Explorer 32-bit or 64-bit?

  --

  Maria

• Free version of Bridge and trial version of Lightroom and Bridge for Windows Vista

  Hello
  I installed creative cloud a free version of bridge and a trial version of Lightroom, but clicking on a raw image file appears ' to open the file must specify the program you want to open it.
  If I try to open camera raw (right click on the file imange) and select "open on CameraRaw" appears "the main application of the bridge is not enabled" and "To activate this bridge function requires that an original product has been started at least once.".  But I don't know what to do. I can only use Lightroom separately from the bridge.

  Another separate issue from the previous: are there and, if so, where it finds a version of Windows Vista Bridge?

  Thank you
  Francesco

  To open images in Lightroom, you need to start Lightroom and then use the import function. Double click an image not open in Lightroom. Camera raw is a plug-in for Photoshop, Photoshop Elements, and After Effects. It will not work with just the bridge. If you have installed the bridge you will also need to install Photoshop which is also part of the creative package. Then you can use Bridge to access your raw files, then open them in camera raw. The way you have to put things in place now with Lightroom and Bridge, you can open your raw files by starting Lightroom and using the import function. Lightroom is not affected by plug in Camera Raw.

• Is there a version of Microsoft Streets & Trips for truckers?

  Move in a tractor trailer, I am using Street & trips MSN for years, but we meet every so often where no truck-trailer is supposed to go. So before we get an upgraded version, I wanted to see if there was one for professional pilots!

  Hi ginger,

  No, not specifically.  The choices are essentially with or without GPS.  To get the best information, start here: http://www.microsoft.com/Streets/en-us/default.aspx.

  For more information, try the special forum for this product: http://social.microsoft.com/Forums/en-US/streetsandtrips/threads.

  Maybe you can use it in combination with MapPoint (or even consider MapPoint separately): http://www.microsoft.com/uk/mappoint/home.aspx.

  I hope this helps.

  Good luck!

  Kosh

• MICROSOFT GREETINGS WORKSHOP PROBLEM

  I installed Microsoft Greetings Workshop of and first CD of Windows 98 on my Toshiba Satellite 755 laptop running Windows 7 64-bit.  I am able to create maps and print using Greetings Workshop.  Unfortunately, I can't send e-mail Greetings Workshop cards.  I get error messages saying that it is too big.  How can I transfer the map from Greetings Workshop to my Image to compress for emailing software?  Is there another way I can email these cards directly from Greetings Workshop?

  Depends on exactly what kind of file that the program creates as to if you can send this file as an attachment which can be read on another PC.

  As it is, I suspect you would need to print the file then print scan using your scanner.

  You are lucky, the program installed at all and can be used

• is there a version of Microsoft Games - Minesweeper, solitaire to spider for windows 8

  is there a version of Microsoft Games - Minesweeper, solitaire to spider for windows 8

  Yes, there are several in the App store both free and purchase. Card games are provided as Microsoft Solitaire Collection and is free. Hope this helps and if you need any additional aid station and we will be happy to help you.

  The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it's employees, or any other Member of this forum member.

  "When we try to take anything by itself, we find it hitched to everything else in the universe."-John Muir.

• Toshiba value added Package for Windows Vista Version 1.1.3 on Qosmio F45

  I installed the new * Toshiba value added Package for Windows Vista Version 1.1.3 * for my Qosmio F45-AV413 and function keys was arrested for work.

  If I don't go back to the previous system, there is no action that I can do to make the works of buttons again.

  I tested with Vista Home Premium which is installed with the product, tested with Vista Business from scratch, and none of them work as expected.

  Well, if someone could help me with this question I really thank you,

  Marcelo.

  Have you already tried to install an earlier version of the software function button on your system? I think the new version is buggy and if not already a newer version is released, you should have the old version until a new one comes out.

  Please check if the old version works, it shouldn´t be a big problem for the single download from the Toshiba driver download site.

  See you soon

• Unable to run the original version of Combat flight simulator in Windows Vista

  Hello

  I am trying to run the original 1998 version of combat flight simulator in vista. I've run it no problem in xp. The program installs OK and works OK, but does not have a joystick. I can calibrate the joystick in the program, but not actually control anything. I installed Flight Simulator 98 and had exactly the same problem. Both programs ran perfectly under xp. I realize has the latest versions will work more than likely OK, but for the moment cannot afford to replace my existing one.
  Thank you
  Simon

  Hi Simon,.

  It seems that the joystick drivers is not updated for windows Vista. Let us know if the gamepad work on other games in Windows Vista.

  Try to access the link below and install the gamepad for vista drivers and install the same as an administrator.

  http://www.Logitech.com/index.cfm/441/2967&CL=GB, fr.? The software ID = 3916 & DiSo = 13
  http://www.Logitech.com/index.cfm/441/302&CL=GB, fr.? The software ID = 633 & DiSo = 13

  If this does not work, try to contact Logitech and check if they have updates on this for Vista.

  Kind regards
   
  Srinivas
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Why Microsoft did remove the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to fix it?

  No Option to install repair - SAD

  Hello

  Why Microsoft removed the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair.

  I recently had a problem where Vista Business 64-bit would only boot to a black screen with a mobile cursor - KSOD.   Who, in searching the Web I found is a fairly common problem with Vista.  I discovered that my only option was about to reinstall Vista CLEAN and all the other programs I had installed under it.  I can't believe that Microsoft released the 'repair installation option"similar to that of Windows XP, where you can hit the"R"key during installation and we left with nothing but the"System Restore"options and"Startup Repair ".  Neither of which has helped in my situation.  Since then, this was a dual system boot with XP Pro, then any restore point has been removed from the partition to Vista anytime, I started another recognized problem, by Microsoft, which Microsoft has made no significant effort to fix, in addition to recommending that you hide the partion Vista in XP - a whole of XP.  That beats a little the entire purpose of dual boot.

  As I tried to start in safe mode, it left me at the same point as a normal boot - black screen with a cursor.  I tried ctrl + alt + delete and nothing. Two Windows RE options did not help me.  This left me no option but to the completely reinstall Vista.   Why Microsoft did remove the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair.. Please don't tell me that it is because Vista uses an image file instead of an installation as XP system.   I see no other reason for not allowing the upgrade of outside BONE in addition to Microsofts greed and paranoia that he can transform the operating system easier to install illegally.  I hope that some third party has actually changed the Vista installation routine to allow you to install Vista on itself, because as it is, it's really hard for me to even recommend Vista as the operating system or install any where else, if not the only recourse after loading OS, is to reinstall completely.

  Adobe, Autodesk, and almost all other software publishers... allow you to perform a "REPAIR" of their software installation, if something prevents you to load after installation.  Even MS Office has a routine repair.  Ms has an internal version of the Setup routine which allows outside the OS upgrade option that you want to "Upgrade" / repair? ".  If not, why?

  -Todd w.

  "Why Microsoft removed the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair."

  «.. . After using XP's repair function, the operating system itself would become less stable and frankly not in a good state of repair. »

  As Todd, is the answer.

  "This response does not hold water as on one of my computers I've been running Windows XP for about four years now, after a repair install.

  Then, you were lucky.  Try to replace the system files on a computer that does not start even at a desk or safe mode usually will get a return to office, but will probably repeat the same problem in a few weeks.  Tech professional would only use this function to retrieve the data before a complete reinstallation.

  "I thought that this area was a place to really get answers instead of the ole same"answers of bs that are on all the other forums."

  It is a place that will try to help you fix your computer if you have problems.  It has technicians in computing, no decision-makers, developers or executives.  We will try to answer technical questions about problems you might have with Windows Vista.

  If you want to have input on the future of Microsoft operating systems, then help you beta-test and provide feedback to the developers.  Windows 7 and IE 8 are currently in beta.

  Another possible place you could make suggestions which could see the developers would be:

  https://connect.Microsoft.com/default.aspx

  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How do I get and updated a version of ms paint I have windows vista

  I have windows vista and I want to upgrade to the latest version of ms paint (the one I have currently provided with my computer

  Hello

  Thanks for posting in the Microsoft Community.

  In order to quickly provide a solution, please answer these questions:

  Are you facing any problem with Microsoft Paint on Windows Vista?

  Microsoft Paint is a program by default with the operating system installed on the computer. Unfortunately, you cannot pass the version of Microsoft Paint unless you upgrade the operating system.

  You can see the following article for more information on using Microsoft Paint and tools:

  With the help of paint

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-paint

   

  Paint tools

  http://Windows.Microsoft.com/en-us/Windows-Vista/paint-tools

  If you need further assistance, please answer and we will be happy to help you.

• No Support extended for Windows Vista or Windows 7 Home Edition versions Premium, Home Basic edition and full edition of Windows

  Is it true that Microsoft will end Windows Vista, and Windows 7 Home and Ultimate versions are supported in 5 years? Rannvijay Kapoor

  Is it true that Microsoft will end Windows Vista, and Windows 7 Home and Ultimate versions are supported in 5 years? Rannvijay Kapoor

  support for Windows vista will be completed two years after the release of windows 8, or five years from the date of release of vista, according to what is more LONG.

  Windows 7 support ends two years after the release of windows 9, five years from the date of release of windows 7, according to which is over long.

  These are minimum estimates, they probably will support them much longer.

  teengeek.freehostingcloud.com

• Why is there no option to burn pictures on a dvd in the photo gallery for windows vista

  I try my best to find a way to BURN a DVD of my photos that I had downloaded in windows live photo gallery, or windows photo gallery.
  I even try to find a way to burn pictures on a DVD via windows developer.

  NO LUCK.
  It isn't even an option anywhere to BURN a DVD.
  There are options to post on twitter or facebook, NO I need or can use.
  There is even an option to copy on my computer, I do not need.

  I have a lot of photos that are on windows live, and all I have to do is burn or create a DVD, so I can send it out, but there is simply no option for this?

  I have windows VISTA BASIC.

  "I checked up on top of the windows for the info site, and he mentions to click on the" "burn the dvd icon" ", but IT is there NO SUCH BOTTON of CLICK ON MINE :>>>

  I hope someone could help me with this frustrating problem

  Vista Basic does not include Windows DVD Maker.

  If you want to burn a data DVD, you can use Windows
  Media Player, check the following links:

  Windows Vista - burn a CD or DVD in Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player Burn a CD or DVD in Windows Media Player: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions

  If you want to burn a video DVD that will play like a movie
  in a free-standing DVD player... you need Authoring DVD
  software.

  First... Create your slideshow video with Windows Movie
  Manufacturer and publish (save) in the. Film WMV format.

  Windows Vista - put on the road with Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/getting-started-with-Windows-Movie-Maker

  Then you need DVD Authoring software to create video
  DVD... the following freeware can be worth a try:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.videohelp.com/tools/DVD_Flick
  (the download is: "dvdflick_setup_1.3.0.7.exe")
  (Mirror download (direct link) is the fastest.

  Save the file to your desktop or a folder on your
  hard drive and install from there.

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  AVI to DVD with DVD Flick Guide
  http://www.Digital-Digest.com/articles/AVI_to_DVD_using_DVD_Flick_page1.html

  To create a video DVD base that should play in a free
  permanent drive DVD... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  Advanced Cyberlink, Nero, Roxio, software
  Ulead, etc... but at least it is a start.

  Good luck.

• I accidentally deleted the directory "C:\Program Files (x 86) \Microsoft ' my 64 bit Windows Vista system. How can I get it back?

  I accidentally deleted the directory "C:\Program Files (x 86) \Microsoft ' my 64 bit Windows Vista system.  How can I get it back?

  original title: C:\Program Files (x 86) \Microsoft

  You can try this program:

  http://www.filehippo.com/download_recuva/

  Use the deep Scan option. It may take some time.

  The System File Checker can repair some of the files in there, but probably not all.

  It's probably at least some of the files that have been overwritten. so I would say the the more safe thing to do is to reinstall Windows.

• This version is for windows vista only

  The network drivers provided with the computer on cd and on the partition do not work on windows 7. Page lenovo.com for ideacentre k410 drivers I found this:
  Realtek LAN Driver
  h1100043.exe
  5.76 MB Windows 7 32 bit,
  Windows 7 64 bit 7.48.0823.2011 March 31, 2012

  Install on windows 7, I get: this version is for windows vista only... and the installation fails.

  If I can't get this resolved the computer has no value for me, so I'll be back and never buy Lenovo again.

  Hello

  You can try these Drivers

  Be sure to do a full reboot after each installation.

  Realtek RTL8188CE WLAN driver
  h4wc02ww.exe
  11.62 MB

  LAN (Realtek RTL8111F)
  h1100196.exe
  5.82 MB

  Renesas Electronics USB 3.0 Host Controller Driver
  ID5CAR12WW5.exe
  7.11 MB

  Let me know your results

  Thank you

  Solid Cruver