Is there a way to enable and configure Volume discounts through the import spreadsheet product? Is there a way to allow more than 2 quantity thresholds?

Similar Questions

• Is there a way to allow more than one person accessing and editing a file

  Original title: records of public folders

  Hi, when there is a file on a public folder cannot be access by one person at a time or you get the message 'open read-only '. Is there a way to allow more than one person accessing and editing a file at the same time on a shared drive?

  It's true, but there are a few special cases.  For example, spreadsheet Microsoft Excel is adjustable mode "shared" so that more than one person can make changes at the same time.  If two people edit the same section of the file, they get a prompt asking you which changes are preserved.

  That said-I was never able to use it effectively.

• How can I configure my computer to another person can use with their own password and do not go through the mine?

  How can I configure my computer to another person can use with their own password and do not go through the mine?

  Hello

  Activate the guest account or setup a new account with the access levels that you must allow.
  either will work.

  How to activate the guest account enabled or disabled in Vista
  http://www.Vistax64.com/tutorials/126933-guest-account-turn-off.html

  How to create a new user account in Vista (also see the related tutorials)
  http://www.Vistax64.com/tutorials/93009-user-account-create.html

  User accounts in Windows Vista
  http://www.optimizingpc.com/Vista/multiple_useraccounts.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How to enable and disable, copy or rename the rules via the groovy script?

  A client, we received this question:

  How to enable and disable, copy or rename the rules via the groovy script?

  Foglight 5.7.5

  Hello

  There is this example of support KB

  support.Software.Dell.com/.../99059

  and there is also documentation of Service layer of the administration on the RuleService console.

  Best regards

  Golan

• Are there other ways to make more than 1 kaycode instead of doing one thing to switch-case

  OK, naked with me, because my English is not so good. And I'm still not a professional have

  I did a dance game. A game that objects will fly up to the target and you must press the right keys for them. I know this is kind of the issue on several keypress thing. But I tried to search on them. I still can't understand. And... because I'm almost done my project, but the abovemultiple-keys -How-to-do- it, I might have to recreate everything, start from 0.

  I made a function to put on screen the CSM and managed by a class.

  Then, I made a function to detect if the target hit to the right position and you press the right keys.

  Also, if you press the wrong score will be decressed.

  I "did not only a fuction detect keys and tell what to do.

  So my question is "Is there other ways to make more than 1 kaycode instead of doing one thing to switch-case, for example?"

  It is a part of my code.

  var p1:Number=37;// 37Left(Left)
  ///
  
  function makeLvl(e:Event):void
  {
            if (sTime < sTempo)
            {
                 
                      sTime++;
            }
            else
            {
          
                      sTime = 0;
                      if (SelectedLvl[sArrow] != 0)
                      {
                                var currentArrow:MovieClip;//this will hold the current arrow
                                if (SelectedLvl[sArrow] == 1)
                                {
                                          //place a left arrow onto the stage
                                          currentArrow = new A1();
                                          //set the _x value of the arrow so that it is in the
                                          //right place to touch the receptor
                                          currentArrow.x = 120;
                                          //set the arrow's y coordinate off of the stage
                                          //so that the user can't see it when it appears
                                          currentArrow.y = 400;
                                          currentArrow.arrowCode = p1 ;
                                          addChild(currentArrow);//add it to stage
                                }
  ////
  
  
  
  touchL = false;
  
  ////
  
  for (var i:int = 0; i<numChildren; i++)
            {
                      var target:Object = getChildAt(i);
                      if (target.arrowCode != null && target.hitTestObject(mcReceptor))
                      {//if the object is an arrow and the receptor is touching it
                                if (target.arrowCode == p1)
                                {//if left arrow
                                          touchL = true;
                                }
  mcTxt.txtScore.text = 'Score:  ' + score;
            mcTxt.txtCombo.text = 'Combo:  ' + combo;
            mcTxt.txtScoreString.text = scoreString;
  }
  ////
  stage.addEventListener(KeyboardEvent.KEY_DOWN, checkKeys);
  function checkKeys(e:KeyboardEvent):void
  {
            //if the left key is down and no left arrows are touching the receptor
            if (e.keyCode == p1 && ! touchL)
            {
                      changeHealth(-10);//make the health go down
                      combo = 0;
                      scoreString = 'Bad';
            }
  beginCode();
  ////
  
  
  
  

  I try to put a table and display the number to fit it in, but no luck.

  Maybe I used the wrong table?

  Any ideas? Any suggestions? -Please...

  Thank you so much.

  This may be more advanced than what you're ready for, but it is a way to do

  http://blog.Iconara.NET/2008/03/30/separating-event-handling-from-event-filtering/

  I actually did this with a 'chain of responsibility', where each link has a reminder of determineResponsibility and the handleResponsibility callback. If it does not have responsibility (because she is not responsible), it sends the request on the following link in the chain, which manages or does not work. If you are not familiar with a reminder, it is a variable of type function so that you can change what the function is called repeatedly.

  To clarify, you must provide the first link in the chain, a reference to the event, then call something like a method process() with a reference to the event. This would call determineResponsibility(), which would look at the event to see if the features of the event are what you want. If it returns true, it would be called handleResponsibility(). If it returns false, you would call process() on the following link. The advantage of this design is that you can add and delete links to manage the changing needs of your system. For example, if the character hits something that disables the good movement until the user presses the arrow to the left, remove the link to the right arrow until the user presses the left arrow, then turn on again.

  Post edited by: Amy Blankenship

• My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me

  My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me

  Assuming that you have a valid SIM card in the phone, it is more often symptomatic of a phone that has been hacked or jailbroken to unlock.

  Where do you have the phone first?

• My screen display options box continues to appear without pushing me anything, it appears and begins to go through the options in itself?

  My screen display options box continues to appear without pushing me anything, it appears and begins to go through the options in itself?

  Hello

  It could be hardware or software related. You can view these methods:

   

  Method 1.
  Computers get slower for various reasons: files become disorganized, unnecessary software consumes resources, readers of network unused slow start or too many programs run automatically at startup. Larger, serious questions can dramatically too slow down your computer's performance. You may have a virus or have need troubleshoot clean start.

  Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.

  a. refer to the article below for the procedure safe mode in Windows XP
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

  
  b. you need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.
   
  Method 2.

  Also, check out the steps that are listed in the articles below and check.
  How to set performance options in Windows XP
  http://support.Microsoft.com/kb/308417

  Restore the performance of your computer with Windows XP
  http://www.Microsoft.com/windowsxp/using/Setup/expert/northrup_restoreperf.mspx

• If you ask the question and then choose a solution, the thread will be closed or still can you ask more details?

  If you ask the question and then choose a solution, the thread will be closed or still can you ask more details?
  (sometimes, someone answers my question, and I want to mark it as the solution and am not yet quite ready for the thread be closed...)

  If you still experience this issue, you can return to this thread.
  But, you must clear the flag solved .

• You Tube, after that 11 seconds the video stops, in all and is no sound through the speakers. No noise in the music of cd too

  For example: in You Tube, after 11 seconds the video stops, in all and is no sound through the speakers. No noise in the music of cd too.

  If you get no audio cd, youtube or anything else, you must first check in the volume control that you are using the sound card, you are connected, that nothing is on mute and volume is sufficient, or install the drivers for your sound card.

  Video YouTube can be that your internet connection is slow or too much peoole try to watch the same video, save it to your hard drive and then watch or, give him a minute or two to download in the buffer before you start watching.

• I have an event soon wishing prints 4 x 6 given to participants who has a logo provided in one corner and my title generated through the lower part of the rest of the impression. I was able to save the logo and title separately in the identity plate, but

  I soon got an event that wants only the 4 x 6 prints given to participants at the event with a box of logo provided in one corner and my title generated through the lower part of the rest of the impression. At this point, I have both registered in the identity of the Lightroom print module plate and tried to get them in place on a model. He wants me to place one or the other on the model in the picture, but not both (which I need). How can I get both on a template and then save this model so I can just pull up and start shooting prints during the event? I'm not WiFi devices yet so I intend import to Lightroom from the SD through my Macbook card and then wired to an Epson photo printer. Test prints I have the air out well with the box logo or title across the lower part, but I really need both on prints for my client. Thank you.

  alanh9307519 wrote:

  I soon got an event that wants only the 4 x 6 prints given to participants at the event with a box of logo provided in one corner and my title generated through the lower part of the rest of the impression. At this point, I have both registered in the identity of the Lightroom print module plate and tried to get them in place on a model. He wants me to place one or the other on the model in the picture, but not both (which I need). How can I get both on a template and then save this model so I can just pull up and start shooting prints during the event?

  Why not use watermark custom logo and him custom identity plate for the title in the LR print module? You also have the option to add the title at the bottom of the image using 'Photo Info' selection "Custom Text". After installation, you can save this as a new model. Unless I'm missing something, it should do the job.

  Instructions for both here in two separate videos: identity plate "Julieanne Kost's Blog of »

  Here is an example with three used:

  

• Enable and configure the card NETWORK FT with KS.cfg

  All,

  Did someone familiar with orders that I would need to put KS.cfg to configure and activate FT?  I've included the part of my KS.cfg here, which will install and configure VMotion.  Background information, I have set up with 3 uplinks vSwitch0, all defined for the delivery by port id w/VST virtual.  Each group of ports (Service Console, FT, VMotion) has a primary and standby two uplinks.  The primary it's Eve on the other and vice versa.  My another vSwitch is configured with 4 uplinks and routes based on IP hash w/VST.

  Anyone have any ideas or suggestions to get this to work?

  -

  ---

  #create exchanges

  / usr/sbin/esxcfg-vswitch - a "VMotion" vSwitch0

  / usr/sbin/esxcfg-vswitch - a vSwitch0 "FT".

  #create id vlan for the port groups

  / usr/sbin/esxcfg-vswitch Pei "VMotion" - v 117 vSwitch0

  / usr/sbin/esxcfg-vswitch Pei "FT" - v 117 vSwitch0

  NIC #add to the vmnic0 vswitches is already added to vSwitch0

  / usr/sbin/esxcfg-vswitch-L vmnic1 vSwitch0

  / usr/sbin/esxcfg-vswitch-L vmnic10 vSwitch0

  #configure vmotion

  / usr/sbin/esxcfg-Vmknic - a "255.255.255.0"-i "10.35.17.253" - n "VMotion".

  / usr/sbin/esxcfg-road - a default value 10.35.17.1

  FT #configure

  / usr/sbin/esxcfg-Vmknic - a "255.255.255.0"-i "10.35.17.254" - n "FT".

  #waiting 60 seconds to restart the service

  Service mgmt-vmware restart

  sleep 60

  #enable vmotion

  cmd-vim-VMware vmotion/hostsvc/vnic_set vmk0

  #enable ft

  #

  #change nic failover command

  VMware-vim-cmd hostsvc/net/portgroup_set-nicorderpolicy-active = vmnic0 - nicorderpolicy-watch = vmnic1, vmnic10 vSwitch0 'Service Console'

  VMware-vim-cmd hostsvc/net/portgroup_set-nicorderpolicy-active = vmnic1 - nicorderpolicy-watch = vmnic0, vmnic10 vSwitch0 "VMotion".

  VMware-vim-cmd hostsvc/net/portgroup_set-nicorderpolicy-active = vmnic10 - nicorderpolicy-watch = vmnic0, vmnic1 vSwitch0 "FT".

  Post edited by: paetecsfb

  Hello

  Friday I finally managed to find the key that allows to FT.

  VMware-vim-cmd hostsvc/advopt/update FT. Vmknic string vmk1

  You can find more details on my blog http://vmware-for-starters.blogspot.com/ or the blog of Mike Laverick for the powershell version http://www.rtfm-ed.co.uk/

  See you soon,.

  David

• Steps to install and configure Node Manager on the local machine and remote

  Hello
  
  I'm using WLS 10.3 on Windows.
  I did the following till now.
  
  (1) installed WebLogic 10.3 on one machine (local computer, on which I created the field and my Server Admin is under execution. 1 managed server is also created on this machine).
  (2) installed WebLogic 10.3 on computer B (remote computer, which Managed Server 2 will be created).
  (3) on the machine, I used the Setup Wizard and create a domain. When creating the domain, I did the following:
  (i) created two managed servers.
  (II) create a cluster
  (III) the servers assigned to regroup.
  (IV) created two machines.
  (v) the servers assigned to machines (Admin Server and MS_1 to the machine and MS_2 machine B).
  
  (4) start Admin Server.
  (5) on the administration Console, I made some configurations for the node Manager on Machines-> Machine A-> Node Manager. The assigned values:
  (i) type (SSL)
  (II) Address (ip_address machine A) listen
  (III) listening port (5556)
  (6) in the same way it did for Machine B.
  
  So far, phsically the managed server (MS_2) directory and configuration is not there on the Machine B (its only configured on A computer because I created the field on computer A).
  
  I went through the documents on the Node Manager and found what to configure. But I have not found what is the sequence of configuration.
  
  Please let me know the sequence of steps I must follow to install and configure the Manager of nodes on the local and remote machine. I want to use Java Node Manager (not the Script node Manager).
  
  Thank you
  
  Sanjay

  Hello Sanjay

  Basically if I understand your question, you have A machine where you had installed ""(permet de supposer admin serveur) and "VAS_MS1_A VAS_ADM_A" (lets assume the managed server.» And on the second machine B you want to create a managed server 'VAS_MS2_B' which must be controlled by node manager, so that you can start console, auto restart the managed server and perform other activities such as the migration of servers using nodemanager. If this is correct, this is the sequence of steps.

  Since you say you are on windows, I start from the principle

  WebLogic version 10'3
  BEA_HOME:-c:\bea
  WL_HOME:-C:\bea\wlserver_10.3
  DOMAIN_DIR:-c:\VASDomains

  Machine has

  (1) install the BEA.
  Using 2 Setup Wizard) create the domain under "c:\VASDomains".
  (3) to start the Admin Server and connect to the console and create two machines "Machine_A" and "Machine_B". Select the types of machines as 'other '.
  (4) once machines are created go to each machine and go to the tab 'NodeManager' and enter the details nodemanager.
  (5) create server 'VAS_MS1_A' and 'VAS_MS2_B '. Enter the respective details. To "VAS_MS1_A", enter a machine name of host or ip and machine "Machine_A" and "VAS_MS2_B", enter the hostname of the machine B or ip and machine 'Machine_B '.

  Machine B

  (1) on this machine install BEA
  (2) then you have to register the machine with the Manager of nodes. So for this first set the environment go to "C:\bea\wlserver_10.3\server\bin" and run "setWLSEnv.cmd". Then type 'java weblogic. Enter the WLST", once you run this command at the next prompt Details ' connect ('', 'adminserverpassword','t3: / / adminserver:port" ")
  (3) then run this command.
  nmEnroll('c:/VASDomains','C:\bea\wlserver_10.3\common\nodemanager')

  Orders above fits machine with nodemanager. The first parameter is "domestic field", now if you see "c:\". ' directory 'VASDomains' will be created. Second parameter is nodemanager House, now if you go into nodemanager houses that some properties will be updated.
  (4) If this node Manager runs on this computer, kill that one and restart the node Manager again.
  (5) now if you go to "Adminconsole--> Machines--> Machine_B--> Monitoring" you can see the status as accessible.
  (6) now you can go "Servers--> VAS_MS2_B--> Control" and start the server. Newspapers to see how the server gets up the tail.

  If you want more details on "nodemanager", dedicated to my 'vasweblogic.blogspot.com' blog, not a lot of messages but post nodemanager can help you.

  I hope that's what you're looking for, have a nice day.

  Naour Vijay.

• Is there a way to delete more than one email in the Inbox. In addition, how to remove all mail in the subfolder "delete"?

  I found a response to remove the Inbox of emails using the "shift" key, but it's a slow process, as I have 8 k emails. I think they're all in the folder 'delete' I need to go through the same process as indicated above to remove them permanently. The "Trash" folder I can do a right click on it and select "Empty trash" and it is gone. This feature is not available for the record of 'delete '. Has anyone found an easy way to empty folder "remove"?

  CTRL + a will select all of the emails currently displayed. In delete folder it just select emails by using ctrl +, then delete them using delete key on your keyboard, or the context menu.

• is there a way to get more than 20 GB of storage?

  I am a photographer under the impression that I would have more than 20 GB of storage.  Is there a bigger 'package '?

  Unfortunately not.  There is no option to increase the storage provided.

• LaserJet 1536dnf: unable to scan and print 2 documents through the ADF faces

  I'm currently scanning and printing, two documents faces through the ADF. I went through the controls on the printer to get the "copy" menu and select the duplex option, press ok.  Then looked for "type of copy. The only choice I have is 1 to 1 side and 1 or 2 sides. According to other posts, there is No '01:58 back!

  Hello

  It does support duplex scanning. You have to do manually

  Kind regards.