Is there a way to force the tablets to read the version of the Tablet?

Similar Questions

• Is there a way to force the router to re-enroll with to take down the tunnel?

  Hi all

  I have the following configuration:

  Crypto pki trustpoint mycompany.com
  number of registration attempts 5
  retry registration period 3
  Enrollment url http://x.x.x.x:80
  Serial number no
  domain name full routername.mycompany.com
  IP address no
  password
  name of the object l = Denver, c = US
  revocation checking no
  automatic registration of the 70s

  Scenario of

  If the certificate has already reached 70 percent of his time of life and the router has already tried 5 times to get a new failure.

  1. is there a way to know how many times the router tried to re-enroll?

  2. is there a way to force the router to re-register without down tunnels?

  3. If the router has already tried, I can increase auto-enrollment to 90 - would this work?

  Thank you very much in advance for your answers.

  See you soon!

  mguzman4158:

  Question 1

  The following command output may indicate failures of re-registration after that as they occur.

  HQ-edg01 #sh crypto pki timers

  PKI timers
  |  1:59:35.732 2D
  |  2D 1:59:35.732 CRL cannot display the COP
  | 353d 8:31:22.880 SURVIVOR CA.domain.null

  Question 2

  This chapter: setting up registration of certificate for a public key infrastructure

  http://www.Cisco.com/en/us/docs/iOS/sec_secure_connectivity/configuration/guide/sec_cert_enroll_pki.PDF

  ... and this chapter: set up and manage a server of Cisco IOS for the deployment of public key infrastructure certificates

  http://www.Cisco.com/en/us/docs/iOS/sec_secure_connectivity/configuration/guide/sec_cfg_mng_cert_serv.PDF

  ... from this Book: Guide of the Cisco IOS Security Configuration: connectivity secure, release 12.4 T

  http://www.Cisco.com/en/us/docs/iOS/sec_secure_connectivity/configuration/guide/12_4t/sec_secure_connectivity_12_4t_book.PDF

  .. could help.

  Question 3

  In my opinion, I think that you would be able to revive the reinstatement at a later date by incrementing the percentage argument.

  Best regards
  Mike

• Is there a way to force the list of databases Access, rather than having the giant icons in my taskbar?

  When I have a few databases open, my taskbar has an icon for each file that is opened in a sloppy "battery."  Naturally, when I hover over the battery, miniature windows display each file.  After that I have a good number of them open (for example, around 10, 11 or 12), stacked icons convert a vertical list.  Is there a way to force this vertical list, even with also open some two or more db?

  If you have Windows 7 Pro or Ultimate, you can use Group Policy.  Otherwise, you will need to perform a small registry change.

  For Pro or Ultimate, see method 1 here--> http://helpdeskgeek.com/windows-7/disable-taskbar-thumbnail-previews-windows-7/

  For any version of Windows 7 (also allows you to set the number of preview windows that appear before moving on to the list), see--> http://www.sevenforums.com/tutorials/75804-taskbar-list-thumbnail-previews-mode-change.html

• Is there a way to force the href = "mailto: to use the default email client"

  I would use the href = "" mailto: "in my site Web automatically opens an email but the end user receives the message"there is no associated messaging program to perform the action requested... " »

  Is there a way to force to the mailto to use the, and the user's default e-mail client?

  Thank you for your help

  Hi James -.

  This is the default behavior of browsers when you handle the mailto link.

  Please keep in mind almost half of Web site visitors do not have an email client because they use mobile devices or computers in public or web-based email like Gmail, messaging, MSN etc.

  Please do not feed the spammers robots. Recommended is to use a HTML element 'form' in conjunction with a script of processing forms aside server. Ask your webhost if they provide one for you.

• Is there a way to force the transfer of files in a certain order?

  Hello
  XP sp3 running on computer dell laptop 6400.

  I'm trying to transfer an audiobook on an sd card and the need to keep the files in order. Periodically, one or two files are sent out of sequence. Since my Player reads the files in the order they were sent, this is unacceptable. Is there anything that I can force the orders files are sent?

  Thank you

  * original title - scrambled records *.

  The device creates a "playlist" because the files are copied, and so that they are copied.

  If the files are all in alphabetical or numerical order copy the files from the CD to the hard drive, then copy them to the hard drive of the machine with the copy command and a list of files at the command prompt.

  For example, to copy all audio files to a folder named book on the C: drive, and then from the command prompt try:

  for /f "tokens = *" %a in ('dir /b c:\book") copy 'c:\book\%a' x:\

  (where x: is the letter from SD card)

  John

• Is there a way to force the tab order to jump a page and then return to this page in a form?

  I have a several page with a required page layout form.  The problem with the current layout of the form, is that I find my users get to '20' page, and it seems like the natural shape... end and stop the seizure of data and submit.  The problem is, there is a field for additional form on the next page that may have need of important information.

  The information contained in this final field is present only in about 10% of the observations, but are crucial to the file, if necessary.  As I said, the page layout is necessary.

  Is it possible to change the tab order from the last form field on the page "19" to the form field on the page "21", and then again the fields in the form on the page "20"?

  It's pretty simple to implement. Until the event OnBlur in the field, you can enter this code:

  this.getField("OtherFieldName").setFocus ();

  Of course, this will cause the other field to be tabulated in even if the user doesn't click tab to leave the field, a few clicks out of it...

• Any way to force the execution of the workflow on existing data?

  I wrote a workflow rule to update the field back to match the sum of a few custom customer field. When the record is updated or a new record is created income is updated with the desired value. However, I have a few thousands opportunities that already exist. Is there a way to force the workflow to run on any existing data? If not, is the only option for export and re - import all data used?

  Using the mass update is another choice, but to 50 cases per race that is rather painful. The route of export/import is much less clicks. Just empty the opportunity name and filed a trivial you don't use. Change the trivial field in Excel. Recharge with update.

  The f

• Is it done to unplug iMac to unlock that damage the computer? Is there a way to force close when it is completely insensitive?

  I tried closing a screen and got a spinning wheel. The system was totally insensitive. I tried to close it with the power button and when it restarted, he returned to the State. So, as a last resort, I disconnected from the back. After I waited 30 seconds, I plugged it it back, pushed the power button, and it worked fine, once again. Told me you should not unplug the computer because you could do a surge when you plug it in. Is there a way to force quit the application causing the gel when the computer has been insensitive to everything? How about by pressing Command-Option-ESC for 3 seconds? That would have worked?

  Command + Option + ESC only leaves open applications.

  The next time that the system does not respond, press and hold the power button until the screen goes black.

  Wait at least ten seconds before press power once to turn it on again.

  * Never disconnect your Mac from its power source while it is on

• Is there a way to force to render all clips in the work area?

  Is there a way to force to render all clips in the work area? All clips: not only those with horizontal red line indicating that they need rendering! I ask this because videos made preview very well unrolled, but UN-rendered ones are not! My source of the layer film (project and) imply Full HD (1920 * 1080i 25 fps).

  If a Clip has not made, it will not be rendered.

  Basically, what the rendering is to convert the Clips, that don't require not rendered, DV - AVI (DD on a PC projects). This will produce AVI in the media Cache files, make files, and for reading, pre will rely on those. If you look in the folder of files of rendering, you'll see a bunch of files named in the abstract, but these files are now linked in the PREL (project file) and will be used by the program for reading.

  If one were to remove those go files and open this project in the first instance, they would receive a message, 'where's the file 04u434ip0ow. AVI? "[Note: that is just one example of the rendered file name abstract and is not the real name, you'd see.]. Could not ignore those missing now render files, and where they were used, it would be red lines on the clamps.

  As Steve mentions, rendering files are used only for smoother playback. As I use DV - AVI SD projects files on my PC, I have no need of rendering for a reading that is more gentle, until I have changes to the Clips, as superimposition of PiP, effects, titles, etc... I could never restore the timeline, even with these additions, but sometimes, I make a small segment several times, especially with animation effects, that I adjust the settings.

  If it does not receive more smooth playback, then make all the files to be rendered usually reading will greatly improve.

  Good luck and I hope it makes sense.

  Hunt

• Is in any way to 'force' the NB of 550 to 1024 x 768 resolution

  Hello

  Is any way to 'force' the resolution on the NB of 550 to 1024 x 768, Winbdows 8 can take place on this issue? There are some hacks around other netbooks, but I couldn't find anything for the netbook from Toshiba.

  Hello

  In my opinion this is not possible because the internal LCD display supports a maximum resolution of 1024 x 600
  This isn't a matter of driver graphics card or software but it s a hardware limitation of the display internal.

• My audio book purchases aren't syncing my iPhone to my iPad. Is there a way to force sync my purchases on all my devices?

  I bought a few different books on my iPhone and I wanted to listen to them from my iPad Pro (because these speakers are amazing) but when I went to the iBooks app, my purchases of books were there. But not my audio books. Is there a way to force synchronization? They do not appear in the section "purchase" of the store on the iPad either for redownloading. It seems to only exist on my iPhone.

  No, audio books is an exception in that they cannot be redownloaded. You can transfer these purchases to iTunes on your computer and then synchronize other devices with iTunes to transfer audio books to them.

• Is there a way to check the product key on Windows 7

  Ladies and gentlemen

  Tablet of my wife is pre-installed with Win 7 and twice in recent years I needed to reinstall. The tablet with Windows 7 pre-installed and included the disc. I now find I need reintall again as complaints about the machine being slow emanate from the kitchen. While I wrote down the product key for the program that I find now that I have is to not store this piece of paper very solidly and can no longer find it. This raises a few questions. One option is to download the ISO file and install. I did, but it asks for the key of product, which was not really surprising. I have a desktop computer, but is there a way to get the product key without doing a full installation of Windows 7 on the desktop? I'm a bit lazy and do not want to save the office first, if it is not necessary.

  Thanks for your advice.

  David

  Unfortunately, it not that we cannot help you. Your best option is to use the recovery media provided with your computer initially noted in your post and allows to reinstall Windows 7.

  The tablet with Windows 7 pre-installed and included the disc

  What you can do is, create a bootable copy on a USB stick with WinToFlash

  Homepage of WinToFlash - install Windows USB-

• Is there a way to make the snap windows volume mixer all volume of requests to match the main volume?

  I noticed that windows likes to change my settings of volume for some applications, probably in an effort to help me, but it seems to create more problems than it prevents. For example, when I start a game, my itunes volume is lowered. The way I calculate it, this often leads to a variety of different volume levels for different applications after awhile, and if I turn up the volume with my volume key (which increases the overall volume) they only rise proportionally. So if the volume of Chrome is 50% and iTunes' volume is 10% and I increase the volume to maximum, iTunes volume only goes up to 20%, forcing me to manually open the mixer volume and level everything. I noticed the overall volume take a gray line in the whole of the mixer, is there a way to force all applications to align on this gray line and does not move unless I change myself in the mixer? Uncheck everything in the volume control options didn't fix it.

  Thank you.

  The way I did earlier was to move all the sliders up to 100% (look at your ears, however, if you have headphones on - the "bong" sound system is going to be quite noisy!).  After that I did, all volume settings have been aligned on the line grey and synchronized with the master volume.

• Is there a way to increase the text size in Windows 8 applications?

  Is there a way to increase the text size in Windows 8 applications?

  I find the way to text size too small in most news reader applications.  Looks like you should be able to increase or decrease the text size the same thing you do in a browser using CTRL + or CTRL-, or your mouse wheel.

  You can increase the size of the text on the desktop, but it doesn't have any effect on the subway, or whatever you call it today.

  Probably, there should be a setting to increase the size of the text under settings of PC!

  IMO, I would probably find a lot of people out there wouldn't buy a W8 Tablet since the text is to small to read!  This has fixed as soon as POSSIBLE!

  Edit: I noticed that a lot of Apps is updated to help with this problem.  Unfortunately not on the main screen of App, if you select an item to read the improvement will become visible or selectable.

  Hello

  On the start screen simply type the word "police" and select the filter settings on the right.  You should see an option 'Make text and other items more or less '.  Click on that and adjust the text or at the desired size.

  -Curt

  These instructions don't change the DPI of the screen ratio when it is in the classic user of Windows interface. The new interface Windows username however does not change when this setting is changed (which, in itself, is rather unfortunate).

  The only way to change the font size of Windows apps Store is as follows:

  1. click on the Start button to get the new user of Windows interface

  2 start typing 'police' (without the quotes)

  3. click on "settings".

  4. click on "enlarge everything on your screen; This opens the settings of PC (which is different from the classic Configuration screen)

  5. set "Enlarge everything on your screen" on it.

  Personally, I still find it too small for a lot of apps, but it's a small improvement on the default settings.

• Is there a way to extend the UI font size?

  Menu bars (for example 'file', 'Edit', 'View', etc.) and the different buttons on the user interface of fireworks are extremely low. Normally, this would indicate that my screen resolution is bad, but it's just for other applications such as Chrome, Word and so on. Is there a way to make the interface more user?

  Non - work on a screen high resolution retina and Fireworks does not support that. It will never, since Adobe stopped development and support from 2013.

  If you're on a mac, you can force FW to start in low resolution (Get Info--> open in low resolution). Which will open the FW with expansion, adjacent to the search icons.

  If you are working on a Windows machine, you're out of luck. Or change the resolution of the screen to a twice lower (who defeated the purpose of your screen high-resolution nice).