Is there a way to replace the items already my editing?

Similar Questions

• Is there a way to replace the series I use?

  I was using a student permit until the last few days and now bought a lot. Is there a way to replace the serial and more key reinstall the plug-in?

  Thank you.

  With the plugin the first raise after deactivation takes you back to the mode of trial in silence.

  If you raise again if she must invite for a new SN.

  -Chris

• Is there a way to color the correct main items that allows me to export/save the results as a mp4?

  Is there a way to color the correct main items that allows me to export/save the results as a mp4?  I shot images that I need to spend on another editor for editing, but I want to fix the images colors before putting to sea.  I know you can color correct elements, but is it possible to export the clips to the original position of the source for mp4?  I tried to export a clip using H.264 corresponds to the source, but the result is a half the size of the original file. Your help is appreciated!

  You realize that what you do is a generational loss.  Compression of the images already well compressed!... as well as many other works that used saw the final cut.

  Increase the flow of your export to preserve quality as much as possible.

• Is there a way to get the number of the current item?

  In an article with multiple instances: is there a way to get the number of the current item? If for example, I'm on the 3rd point, is it some sort of integrated "GET CURRENT NUMBER REGISTRATION" which would return a '3' to the program?
  
  Thank you
  
  Published by: WayneFMcKinstry on April 9, 2010 10:50

  If I get you correctly in tabular element that you want to know the current record or current, you can try this...

  For the current record

  :SYSTEM.CURSOR_RECORD;
  or
  :SYSTEM.CURRENT_RECORD;
  

  for the current element

  :SYSTEM.CURSOR_ITEM;
  

  -Clément

• Is there a way to disable the cost center column in the layout pay TC

  Hi Heroes,
  
  Is there a way to disable the center column of cost in terms of payroll time sheet?
  
  and how do I add the Details column also so a comment can be added for each item a day
  
  Thanks in advance.
  
  Published by: user8331446 on January 12, 2009 17:17

  I'm not a technical guy either! It is how to configure the self-service score card. It seems unusual, but this is the method of support.

  In fact, it is not as technical as it seems. You will need some technical assistance (e.g., s/n), but only to recover and then download the ldt.

  You will need recover the such appropriate LDT file specified in the file table in the document that I've referenced.
  You can then open it with any text editor (such as wordpad or Notepad).

  Here is an example of the type of text you will see (using for example cost center):

  BEGIN HXC_LAYOUT_COMPONENTS 'XXCU Exception Timecard Layout - cost center'
  OWNER = 'ORACLE '.
  COMPONENT_VALUE = "COSTCENTER.
  REGION_CODE = "HXC_CUI_TIMECARD."
  REGION_CODE_APP_SHORT_NAME = "HXC".
  ATTRIBUTE_CODE = 'HXC_TIMECARD_COST_CENTER '.
  ATTRIBUTE_CODE_APP_SHORT_NAME = "HXC".
  SEQUENCE = "210".
  COMPONENT_DEFINITION = "CHOICE_LIST".
  RENDER_TYPE = 'WEB '.
  PARENT_COMPONENT =
  * "' Exception Timecard Layout - day laid Building blocks for matrix worker scorecard" * "
  LAST_UPDATE_DATE = ' 23/05/2004.

  BEGIN HXC_LAYOUT_COMP_QUALIFIERS 'XXCU Exception Timecard Layout - cost center'
  OWNER = 'ORACLE '.
  QUALIFIER_ATTRIBUTE_CATEGORY = "CHOICE_LIST".
  QUALIFIER_ATTRIBUTE1 = "Custom9VO".
  QUALIFIER_ATTRIBUTE4 = "N".
  QUALIFIER_ATTRIBUTE8 = "DisplayValue".
  QUALIFIER_ATTRIBUTE9 = '#NUMBER value '.
  QUALIFIER_ATTRIBUTE10 =
  * "Oracle.apps.HxC.selfservice.Timecard.Server.Custom9VO" *.
  QUALIFIER_ATTRIBUTE11 = "TIMECARD_BIND_END_DATE" TIMECARD_BIND_END_DATE ".
  QUALIFIER_ATTRIBUTE17 = "OraTableCellText".
  QUALIFIER_ATTRIBUTE20 = "N".
  QUALIFIER_ATTRIBUTE21 = 'Y '.
  QUALIFIER_ATTRIBUTE22 = 'L '.
  QUALIFIER_ATTRIBUTE25 = "FLEX".
  QUALIFIER_ATTRIBUTE26 = "Dummy economic context."
  QUALIFIER_ATTRIBUTE27 = "Attribut3".
  LAST_UPDATE_DATE = ' 23/05/2004.
  END HXC_LAYOUT_COMP_QUALIFIERS

  END HXC_LAYOUT_COMPONENTS

  To delete this article, just comment it by putting "#" (hash space) in front of each line between HXC_LAYOUT_COMPONENTS BEGIN and END HXC_LAYOUT_COMPONENTS

  Then save your file and get the DBA to uplaod again.

  You must make sure that filename ldt so the section at the top of the file with the entry
  BEGIN HXC_LAYOUTS "XXCU TIM EXCEPTION-SCORE CARD" "HXC".
  OWNER = 'ORACLE '.
  DISPLAY_LAYOUT_NAME = "XXCU Tim Exception Layout - time sheet entry Page"

  have a unique name. You will see that my example has 'TIM' in the name of layout and display name.

  Make you the ldt file name unique so that it does not replace the Oracle version seeded and you're doing the DISPLAY_NAME and LAYOUT_NAME usinque because that's what you will see in your list of page layouts in the preferences in OTL. If you do not change the names, you will see duplicates and won't know which is yours!

  It's about as technical as it gets.

  Good luck. I hope that answers the question further.

  Concerning

  Tim

• our macbook copy all messages and other activities of the iMac in the office. Is there a way to isolate the macbook?

  our macbook copy all messages and other activities of the Office of the IMac. Is there a way to isolate the macbook

  to be a fully independent computer?

  Your iCloud and any IMAP will be synchronized. You can connect with one another on the MacBook Apple ID, or you can turn off sync iCloud and IMAP account.

  System Preferences > iCloud

  Uncheck the items you don't want not synchronized.

  Mail > accounts

  Uncheck all of the accounts that you don't want not synchronized.

• Is there a way to change the default (shrink to fit) printing to a custom print size

  Original title; Print (shrink to fit) default question?

  Is there a way to change the default (shrink to fit) print at a size of print without having to manually change whenever you are going to print?

  Hello

  I suggest you to return the item and check if it helps:

  To set the properties of the printer

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/print_setting_printer_props.mspx?mfr=true

  To set the default values to print

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/print_setting_document_defaults.mspx?mfr=true

• Is there a way to recover the deleted files without using any software?

  Is there a way to recover the deleted files without using any software?

  Is there a way to recover the deleted files without using any software?

  # Software is necessary.

  First check the recylcl tray. If she isn't here, read the following:

  "Deleting" a file does not delete actually it brand just space be used. There are third-party programs that can sometimes recover deleted files. The problem is that the space used by the file is likely to be replaced very quickly, and this makes the unrecoverable file.

  So your chances of successfully recover this file are decent, if you try it again immediately after deleting it and quickly down. If you have used the computer since then (for example to read this answer and write that question), your chances may be very weak now.

  But if the file is large enough, it's still worth a try. Stop using the computer in question immediately, if you haven't done so already. Download an undelete program (in here is one: http://www3.telus.net/mikebike/RESTORATION.html but there are many other choice; do a search) on a friend's computer and bring it to you on a diskette, CD, or drive to the thumb.

  If that fails, your only recourse is to bring or send the drive to a professional file recovery company. This kind of service is very expensive and may or may not work in your case.

• Is there a way to reset the SuperFetch?

  Hi all,

  Core Intel Quad Q8200 @ 2, 33GHz

  4 GB of RAM

  Windows 7 Premium x 64

  Question: Is there a way to reset the Superfetch?

  I have seen/read the solutions on the forum but most of the time related to XP or Vista and I was wondering if it is possible to reset the Superfetch to a clean state and let it rebuild from scratch.

  Reason why I ask is a very high memory use, crawling upward after the restart of 25000 KB up to more than 1, 8 GB (search in taskmanager and ill with Process explore (Sysinternals) it down to Superfetch (SysMain).) The entire system making it sluggish.

  Recently had a disc that has been started to brake down and succeeded him and used speakers to put everything back in place (because I had just 2 months before doing a clean Win7 (x 64) new reinstall and finally all my software and ready updates).

  However, to be able to start and be able to create an image with True Image, I had to do a restart of Windows with repair of the dvd. Now in the search for this use of memory looked in the Windows\Prefetch directory and I see a lot of programs that are not used after that replace hard drive (Tools for finding the problem hard drive etc..).

  Maybe it's the reason that SvcHost (LocalSystemNetworkRestricted) running this Superfetch (SysMain) uses a lot of memory. I know what Superfetch is for and do not want to disable it simply leaves start again and get rid of all the old .pf files in this directory.

  Also watched to see what Ccleaner (with option clean prefetch advanced), but it shows some (19) of all files (75) in there and doubt that only clean the .pf files would cause Superfetch start at zero?

  As far as I understood another display that he uses other files I could delete (AgGlFaultHistory.db AgGlFgAppHistory.db AgGlGlobalHistory.db) but also read that I could remove all %SystemRoot%\Prefetch as answer in this forum (link below)

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/SuperFetch-error-2/fd52fc9d-DBD8-48e3-94c3-1d06a249a912

  Hope someone can help with this. Thanks in advance.

  Hello

  Thank you for your response.

  I appreciate your time.

  I suggest you to remove all the contents of the folder 'Prefetch' and check the issue.

  However, try using "ReadyBoost" as soon as you have access to any USB flash drive.

  Please keep us updated on the status of the issue.

  Thank you

• Is there a way to increase the text size in Windows 8 applications?

  Is there a way to increase the text size in Windows 8 applications?

  I find the way to text size too small in most news reader applications.  Looks like you should be able to increase or decrease the text size the same thing you do in a browser using CTRL + or CTRL-, or your mouse wheel.

  You can increase the size of the text on the desktop, but it doesn't have any effect on the subway, or whatever you call it today.

  Probably, there should be a setting to increase the size of the text under settings of PC!

  IMO, I would probably find a lot of people out there wouldn't buy a W8 Tablet since the text is to small to read!  This has fixed as soon as POSSIBLE!

  Edit: I noticed that a lot of Apps is updated to help with this problem.  Unfortunately not on the main screen of App, if you select an item to read the improvement will become visible or selectable.

  Hello

  On the start screen simply type the word "police" and select the filter settings on the right.  You should see an option 'Make text and other items more or less '.  Click on that and adjust the text or at the desired size.

  -Curt

  These instructions don't change the DPI of the screen ratio when it is in the classic user of Windows interface. The new interface Windows username however does not change when this setting is changed (which, in itself, is rather unfortunate).

  The only way to change the font size of Windows apps Store is as follows:

  1. click on the Start button to get the new user of Windows interface

  2 start typing 'police' (without the quotes)

  3. click on "settings".

  4. click on "enlarge everything on your screen; This opens the settings of PC (which is different from the classic Configuration screen)

  5. set "Enlarge everything on your screen" on it.

  Personally, I still find it too small for a lot of apps, but it's a small improvement on the default settings.

• I put 240 photos in an InDesign document using mini bridge.  Is there a way to hide the photos I used after I have put in my document?

  I put 240 photos in an InDesign document using mini bridge.  Is there a way to hide the photos I used after I have put in my document?

  I think Willi, and I even read your question differently. I thought you wanted to hide the images in Mini Bridge once they have been placed in InDesign so that you could keep track of those who you have (if you put twice the same image). If you want to hide in InDesign (as Willi read the question), his suggestion is very good. Another alternative is to use the shortcut to hide (command 3 on Mac OS), after putting the images, but before you click next to deselect them.

  I do not use Mini Bridge, so I can't help you there. If you want to use the full version of the bridge, you can use a Move command to move the selected items to another folder (temp), where they will not appear in your current folder. You can move after that that they all were placed. A bit of a hack, but it could work.

• Is there a way to reflect the image taken by the spot Healing Brush tool?

  Hello

  Is there a way to reflect the image taken by the spot Healing Brush tool? For example, I learn to restore an old photo of a face. One nostril is damaged, so I want to use the other to replace, but the image of the nostril by the spot Healing Brush tool is back forward.

  Thank you

  Sally

  Hi Sally,

  It is the wrong tool to use, but rather to use the clone stamp. Open the control panel in the Windows menu and you will see many options. One is to reverse the cloned area. Like this. Put the clone on its own layer like that allows you to better position and apply a layer mask to cover whatever it is unwittingly cloned. Cloning should be done with a soft brush at around 50% opacity just to enhance the effect. When you have finished giving the layer clone a soft Gaussian blur as this smooth out the look. Then flatten to restore

  It may be useful

  Terri

  

• I just bought a DMC-TZ70 Lumix, but thw RAW images are not supported in the elements.  Is there a way to turn the problem?

  I just bought a DMC-TZ70 Lumix, but thw RAW images are not supported in the elements.  Is there a way to turn the problem?

  According to this faq:

  FAQ: Photoshop Elements will work with my camera, or why does not open my raw files?

  Devices supported by Camera Raw

  your camera requires the ACR 9.0 module which is only available in PSE13 after update (menu help/update).

  If you have an older version of elements, the free solution is to use the DNGconverter mentioned in the faq above with the download links.
  This stand-alone software converts all of a folder of your raw files to DNG format raw that older versions of items can read and modify.

• Is there a way to control the color (or other properties) of several layers of text at a time?

  A frequent case when you design a Web page:

  I create text elements/blocks and each a title, body, etc...

  each title is a separate text layer and I use the actual content (so no lorem ipsum)

  Is there a way to set the color of the text as separate dynamic object or kind of style? So when I want to try other color I would be able to change it in one place and it applies to all linked text layers that use it...

  Dynamic objects using works fine for repeated identical items, but not when the elements are different as these texts...

  The library using CC allows you to set the style that can be applied again to several objects, but in the case of a PSD file complex with a long list of records and layers, it is very difficult and a lot of time to select all the layers desired by hand and apply them the style you want...

  In the end, I'm looking for a clear way to define a style sheet: fonts, colors, attack, variants, etc. as distinct kind of "smart objects"...

  Is this achievable in Photoshop?

  Create a solid color fill adjustment layer and turn it into a smart object. This duplicate SO using ctrl/cmd-J and hang it on all the text layers you want color. You can then open the SO and change the color and it will be applied to all the text layers that this particular SO is cut to.

• Is there a way to backup the catalog only not listed in the catalog? "CATALOGUE START WITH" generates double entry.

  The version of DB is 11.1.0.7.

  The 'CATALOGUE START WITH' not only added the backup set that are not in the RMAN catalog, but also added a second copy of files that are already in the catalog.
  The files are not a second copy; they are the same file in the same directory.

  Having two copies of the catalogue, by mistake when you explicitly delete the backups.
  We must add the force clause to avoid the error.
  RMAN > delete backup FORCE tag "off site-1';

  The clause of power ignores any IO error.
  The removal is part of our regular off-site backup script, which returns a false positive error when the clause is omitted.
  I don't want the clause, in order to be informed if the backup set that are supposed to be on the disk is not here, for example, if someone had removed the files manually at the level of the BONE without using rman.

  Is there a way to backup the catalog only not listed in the catalog?
  or maybe delete the copy entry #2 of the catalog?

  Find below an example test scenario:

  RMAN > list backup tag summary "off SITE-1';
  Backup list
  ===============
  S LV TY Device Type delay #Pieces compressed #Copies Tag key
  ------- -- -- - ----------- ------------------ ------- ------- ---------- ---
  12. A DISC 11 JUNE 13 09:41:45 1 1 NO OFF SITE-1
  13. A DISC 11 JUNE 13 09:43:31 1 1 NO OFF SITE-1
  14. A DISC 11 JUNE 13 09:43:33 1 1 NO OFF SITE-1
  15. A DISC 11 JUNE 13 09:43:34 1 1 NO OFF SITE-1

  RMAN > CATALOGUE START WITH "C:\backups\offsite_disk\IBISdatabase\scheduled_offsite";
  the search for all files that match the pattern C:\backups\offsite_disk\IBISdatabase\scheduled_offsite
  ...
  cataloging done
  List of cataloged files
  =======================
  File name: C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\scheduled_offsite\06OBTJEP_1_1
  File name: C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\scheduled_offsite\07OBTJI3_1_1
  File name: C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\scheduled_offsite\08OBTJI5_1_1
  File name: C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\scheduled_offsite\09OBTJI6_1_1

  RMAN > list backup tag summary "off SITE-1';
  Backup list
  ===============
  S LV TY Device Type delay #Pieces compressed #Copies Tag key
  ------- -- -- - ----------- ------------------ ------- ------- ---------- ---
  12. A DISC 11 JUNE 13 09:41:45 1 2 NONE OFF SITE-1
  13. A DISC 11 JUNE 13 09:43:31 1 2 NONE OFF SITE-1
  14. A DISC 11 JUNE 13 09:43:33 1 2 NO OFF SITE-1
  15. A DISC 11 JUNE 13 09:43:34 1 2 NONE OFF SITE-1

  RMAN > DELETE BACKUP TAG "off SITE-1';
  List backup items
  BP key BS Pc # Cp # status Type room nom_peripherique
  ------- ------- --- --- ----------- ----------- ----------
  24 18 1 1 AVAILABLE DISK C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\06OBTJEP_1_1 < <-same file
  30 18 1 2 AVAILABLE DISK C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\06OBTJEP_1_1 < <-same file
  25 19 1 1 AVAILABLE ON THE DISC C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\07OBTJI3_1_1
  31 19 1 2 AVAILABLE ON THE DISC C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\07OBTJI3_1_1
  26 20 1 1 AVAILABLE ON THE DISC C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\08OBTJI5_1_1
  32 20 1 2 AVAILABLE ON THE DISC C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\08OBTJI5_1_1
  27 21 1 1 AVAILABLE ON THE DISC C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\09OBTJI6_1_1
  33 21 1 2 AVAILABLE ON THE DISC C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\09OBTJI6_1_1

  remove the item from backup
  = RECID C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\06OBTJEP_1_1 backup piece handle = STAMP 24 = 821470356
  remove the item from backup
  = RECID C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\07OBTJI3_1_1 backup piece handle = STAMP 25 = 821470356
  remove the item from backup
  = RECID C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\08OBTJI5_1_1 backup piece handle = STAMP 26 = 821470356
  remove the item from backup
  = RECID C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\09OBTJI6_1_1 backup piece handle = STAMP 27 = 821470357
  6 objects deleted

  RMAN-06207: WARNING: 4 items could not be removed for DISC due channels
  RMAN-06208: status do not match.  Use the OVERLAP command to set status
  RMAN-06210: list of relevant objects
  RMAN-06211: =.
  RMAN-06212: filename/Type object Handle
  RMAN-06213: --------------- ---------------------------------------------------
  RMAN-06214: part C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\06OBTJEP_1_1 of backup
  RMAN-06214: part C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\07OBTJI3_1_1 of backup
  RMAN-06214: part C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\08OBTJI5_1_1 of backup
  RMAN-06214: part C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\09OBTJI6_1_1 of backup

  Hello

  List of Files Unknown to the Database
  =====================================
  File Name: /oracle/product/10.2.0/db_2/dbs/hc_db10g.dat
  File Name: /oracle/product/10.2.0/db_2/dbs/initdb10g.ora
  File Name: /oracle/product/10.2.0/db_2/dbs/lkDB10G
  File Name: /oracle/product/10.2.0/db_2/dbs/.initTestDB.ora.swp
  File Name: /oracle/product/10.2.0/db_2/dbs/snapcf_db10g.f  
  
  Do you really want to catalog the above files (enter YES or NO)? no
  

  Here you can see the database says 'Unknown files to the Database list' and then asks to added above files. These files are of no use to the RMAN. So I went no.. But the backup in the directory file is cataloged twice already, but watch copy 1 when asked of RMAN. Probably, it might be a bug and it is advised to increase SR with oracle to resolve the problem.

  Thank you!!