our macbook copy all messages and other activities of the iMac in the office. Is there a way to isolate the macbook?

Similar Questions

• can someone help me! I have a P4 with service pack 2 Professional windows installed in it, my problem is that I am unable to copy all files or other animals. a dialog box appears indicating the integrity of violeted files

  Ideas:

  • Programs you arecan someone help me! I have a P4 with service pack 2 Professional windows installed in it, my problem is that I am unable to copy all files or other animals. a dialog box appears indicating the integrity of files violeted the problems with
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  bastyav,
  We use the exact and some error message in more detail on the issue.  This problem occurs with any file on the disk or only some of them?  You are logged as administrator?  Has anything changed recently (hardware or software)?

  The first thing I would say to run a Virus scan and malware.  If you do not have an antivirus program, then you can get one here: http://www.microsoft.com/Security_essentials/

  If there are no problems found then not try the following steps:
  Run the following commands.

  Chkdsk /r

  http://support.Microsoft.com/kb/315265

  sfc/scannow

  http://support.Microsoft.com/kb/310747

  Let us know the results and the information requested.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Is it legal to make spreadsheets and other activities using Word from Microsoft and your website software clip art for commercial use?

  Original title: TeachersPayTeachers.com

  I'll be seller on the web site of teachers pay teachers. Is it legal to make spreadsheets and other activities using Word from Microsoft and your website software clip art for commercial use? Also, is it legal to do PowerPoint presentations to sell on TpT?  Is it legal to use your fonts as free cosmic in my products? Be sure to answer you in simple, all of the legal terms because my head spin.

  Thank you

  Irish

  Original title: TeachersPayTeachers.com

  I'll be seller on the web site of teachers pay teachers. Is it legal to make spreadsheets and other activities using Word from Microsoft and your website software clip art for commercial use? Also, is it legal to do PowerPoint presentations to sell on TpT?  Is it legal to use your fonts as free cosmic in my products? Be sure to answer you in simple, all of the legal terms because my head spin.

  Thank you

  Irish

  When you register as a seller on TPT you can then go to their forum and find all your answers.  Click on your dashboard (you'll see that once you signed) and you will find the forums where the seller go to questions and support.  I hope this helps.

• my site is using dreamweaver cs4, I can copy all my and put them in dreamweaver cs6 without any problem?

  my site is using dreamweaver cs4, I can copy all my and put them in dreamweaver cs6 without any problem?

  The simplest way to use CS6 on a former site of CS4 on the same computer would be of...

  1. open CS4 and choose Site > Manage Sites

  2. Select the site and choose export

  3. This will create a your site settings .ste file (no site file is stored in this)

  4 close the CS4 and open CS6

  5 CS6 hit Site > Manage Sites > import to bring these parameters from the .ste file

  This will give you the same exact settings (FTP and otherwise) of CS4 in CS6 while using the same files the.

  If you use another computer together, you will need to make a copy of your local site on the new machine folder, and then export/import the .ste as above with an extra step possible Reassociation the local site on the new machine folder, if the structure/location of the file is not the same between machines.

• "Could not open INSTALL. NEWSPAPER"when I try to uninstall Yahoo messenger and other programs of the control panel

  Original title: "Could not open INSTALL. JOURNAL ".

  We get this message when I try to uninstall Yahoo messenger and other programs of the control panel.

  Hi thomaskirchoff,

  
   

  (1) how long have you been faced with this problem?

  (2) what is the complete error message you receive?

  Method 1: You can see the steps in the Yahoo link below

  http://help.Yahoo.com/kb/index?locale=en_US&page=content&y=PROD_MSNG_MSNG10&ID=SLN649&impressions=true

  
   

  Method 2:

  If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 3:  Put the computer to boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

• The internet connection on my laptop and other portable device, but not in my office.

  Data sheet:

  -Windows 7 Ultimate 64 bit

  -All browsers and devices are up-to-date.

  Questions:

  I have this problem since yesterday and I tried to solve this problem since.

  The problem is that on my connection (WiFi) network, it says I have access to the internet, and of course it does because I can use internet without problem on my laptop, iphone and other portable device, but not in my office. It says I have an internet connection and when I ping a browser it answers correctly and it gives me all the Member States and other information.

  When I troubleshoot it it gives me something like "your computer seems to be configured correctly, but the device or resource (www.microsoft.com) is not responding." I thought it was a DNS problem so I reset everything, but no luck. Here are things I tried to solve this problem.
  -Reset TCP/ip using cmd.
  -Check if the IP is obtained automatically.
  -Check if I'm using the proxy server.
  -Rebooted (reinstalled windows)
  and many other things that I have searched on google
  But these proposals did not fix the problem.
  Here is my IP config
  
  
  C:\Windows\System32>ipconfig/all

  Windows IP configuration

  Name of the host...: Genie2Stonk-PC

  Primary Dns suffix...:

  Node... type: hybrid

  Active... IP routing: No.

  Active... proxy WINS: No.

  Wireless Network Connection 2 wireless LAN adapter:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Microsoft Virtual WiFi Miniport adapt

  Physical address.... : 68-A3-C4-17-D1-F7

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :

  ... Description: 802.11n wireless network adapter

  Physical address.... : 68-A3-C4-17-D1-F6

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Address IPv6 local link...: fe80::1d3f:8912:70e:57e5% 13 (Preferred)

  IPv4 address: 192.168.1.3 (Preferred)

  ... Subnet mask: 255.255.255.0.

  Lease obtained...: December-01-12 01:45:01

  End of the lease...: December - 02 - 12 01:45:06

  ... Default gateway. : 192.168.1.1.

  DHCP server...: 192.168.1.1.

  DHCPv6 IOOKING...: 208184260

  DHCPv6 DUID customer...: 00-01-00-01-18-4A-2D-A4-64-31-50-35-E9-3F

  DNS servers...: 192.168.1.1.

  NetBIOS over TCP/IP...: enabled

  Tunnel adapter isatap. {40B4470F-DE12-452A-ADBA-A425B5329C34}:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Microsoft ISATAP adapter

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  Card tunnel Teredo Tunneling Pseudo-Interface:

  The connection-specific DNS suffix. :

  ... Description: Teredo Tunneling Pseudo-Interface

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  IPv6 address: 2001:0:4137:9e76:1419:b1f:3f57:fefc (preferred

  EXEs)

  Address IPv6 local link...: fe80::1419:b1f:3f57:fefc % 12 (Preferred)

  ... Default gateway. : ::

  NetBIOS over TCP/IP...: disabled

  C:\Windows\System32 >
  I can't understand what I've tried so many things and nothing never gave me a connection back Please HELP.
  If I need to provide more information please let me know.
  Thank you.

  Hi zinx2op,

  Thanks for posting your query in Microsoft Communities. The description of the problem, I understand that you are not able to connect to the WiFi of the desktop computer. Provide the following information for the better understanding of the issue:

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         You use a third-party security software?

  ·         If it works well before?

  Follow these methods.

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  Startup options (including safe mode)

  Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.

  Method 3: Follow the steps in the article.

  Windows wireless and wired network connection problems

  How can I troubleshoot network card?

  For reference:

  How to reset the Protocol Internet (TCP/IP)

  Let us know if you need more assistance.

  Thank you.

• How to copy phone numbers and paste them into the Dialer?

  Hello everyone!

  I posed in the title, how can you copy phone numbers and paste them into the Dialer to make calls?

  Thank you!

  I can't send a report - I am a normal user like you but I was help other owners for awhile better as I can - to contact Sony care use this link http://www.sonymobile.com/global-en/support/contact-us/

• How can I get the history, SID and other details of the accounts of users deleted in Windows XP, 7 and 8?

  Original title: deleted user accounts.

  Hi guys,.

  I want to know the activities of a user whose account has been deleted. How can I get the history, SID and other details of the accounts of users deleted in Windows XP, 7 and 8?

  Hello

  Thanks for posting in the Microsoft Community.

  There is no newspaper available for the activities of the user. There are just a few activities of windows and the error logs is stored in Windows.

  Hope this information helps.

  If you need help to resolve any issues related to Windows, please reply and we will be happy to help you.

• In Adobe Flash CS6, I have a blue box appearing around lines drawn with the line tool (and other tools like the brush etc.). I can't understand how to disable.

  In Adobe Flash CS6, I have a blue box appearing around lines drawn with the line tool (and other tools like the brush etc.). Whenever I try to use a tool, a blue box appears around the line and I have to double click on it to handle, which opens just this line in a screen finery semi where all other objects are semi-gris in the background. I can handle this line in this screen, but nothing else at this point I could do 5 minutes ago. For example, I can no longer reach the 2 lines drawn by the tool online together. For some reason, it started randomly (probably due to an accidental combination) and I just can't put it to what it was. I inserted a video showing if all goes well I mean. Any help would be appreciated.

  Object drawing mode. Simply disable it in the tools Panel, or by using the default keyboard shortcut, which is J.

• The difference between the "All Content" and "Discussion" tabs on the new forum?

  Hello

  Anyone know the difference between "All Content" and "Discussion" tabs on the new forum?  They seem to be the same.  I'm confused.

  Petey

  Petey,

  If I was part of the beta update of the forum, there were certain that we could not effectively test more aspects (such as the ' Like'), that some liked it but others did not. This kind of thing happens.

  In addition, now that we have the full version, and all servers are synchronized, there are probably things that beta testers not to experience. We all will learn in the process too. Also remember, much of the new forum software has been provided by Jive, and although many of us have commented (advantages and disadvantages), only a lot could be addressed. He was not quite want to do a beta on the Adobe software, like there was a full and distinct layer between the two.

  So far, what I see seems close to what we have seen a few weeks (months?) ago. Now, I need to really put the real software to the test, to see what has changed from then on, until now.

  Good luck

  Hunt

• Just installed Mac OS Sierra on Mac Pro air. What I do need to update to Safari and other applications on the iPhone and I have the carpet?

  Just installed Mac OS Sierra on Mac Pro air.

  What I do need to update to Safari and other applications on the iPhone and I have the carpet?

  Unless otherwise indicated by an application or in the description of an update, no.

  (144880)

• I have Windows XP Home Edition and use Outlook Express for my e-mail. Is there a way to copy/send e-mail, favorite contacts and my photos on a Flash key?

  Original title: copy files

  I have Windows XP Home Edition and use Outlook Express for my e-mail. Is there a way to copy/send e-mail, favorite contacts and my photos on a Flash key?

  Open the address book in the old identity and file | Export | Address book (wab) to any location on your HARD drive that is easy for you. The office is very well. Then drag that to the flash drive.

  In IE: File | Import and export | Export to a file. Check Favorites | Next | Next | Navigate to a folder or the desktop and export. Drag the folder in the flash player.

  For photos, just right-click on the folder and drag it to the USB and copy here.

• Why EnableProxy Reg_DWORD is missing in windows xp, while windows vista and others, OS has the EnableProxy Reg_DWORD in the registry editor?

  Why EnableProxy Reg_DWORD is missing in windows xp, while windows vista and others, OS has the EnableProxy Reg_DWORD in the registry editor?

  Hi Stuckfree,

  Your question would be better suited for the TechNet forums.

  I suggest you to ask your question to the TechNet forum for better support.

  http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro

• Installation of Adobe met an unexpected failure when you attempt to install the first instance of AdobeAcrobatPro DC.  It is the exact error message and seems to be the case for a number of users.  I am running Windows 7 and has already managed to success

  Installation of Adobe met an unexpected failure when you attempt to install the first instance of AdobeAcrobatPro DC.  It is the exact error message and seems to be the case for a number of users.  I am running Windows 7 and was already able to install Adobe Acrobat Reader DC and have Adobe Flash Player 10 ActiveX installed successfully.  It's the exact error message, there is NO error code!   It seems as there is no support number to contact Adobe to, and the only way to receive the 'support' is through the forum.   PLEASE ANSWER!

  

  Hi tracyes31040766,

  If it you please run this tool cleaner Download Adobe Reader and Acrobat cleaning - Adobe Labs tool to remove the old Acrobat, retsrat your system plates & then try to install it again using this link Download Adobe Acrobat free trial | Acrobat Pro DC.

  Let me know how it goes.

  Kind regards

  Nicos

• Need a powercli script to create a new account a local administrator on all ESX and ESXi hosts in the vcenter

  Hi all

  If someone can help me with a powercli script to create a new account a local administrator on all ESX and ESXi hosts in the vcenter, create a role called admin and give all access except the root. This shoulb be past by a virtual centre.

  Very much appreciated to help him.

  Kind regards

  MelLvin

  I suspect that you posted your question to the wrong thread

  This requires only a minor change to the script above actually.

  Something like that

  $groupName = "group"$accountName = "user"$accountPswd = "password"$accountDescription = "A user"
  
  $esxlist = Get-VMHostforeach($esx in $esxlist){    Connect-VIServer -Server $esx -User root -Password "password"
  
      Try {      Get-VMHostAccount -Id $groupName -Group -ErrorAction Stop | Out-Null    }    Catch {      New-VMHostAccount -Id $groupName -GroupAccount | Out-Null    }
  
      $rootFolder = Get-Folder -Name ha-folder-root    Try{        $account = Get-VMHostAccount -Id $accountName -ErrorAction Stop |        Set-VMHostAccount -Password $accountPswd -Description $accountDescription -AssignGroups $groupName    }    Catch{        $account = New-VMHostAccount -Id $accountName -Password $accountPswd -Description $accountDescription -UserAccount -GrantShellAccess -AssignGroups $groupName    }
  
      $rootFolder = Get-Folder -Name ha-folder-root    New-VIPermission -Entity $rootFolder -Principal $account -Role admin
  
      Disconnect-VIServer -Confirm:$false}