Is there a way to restore the settings 'factory' in LR4

Similar Questions

• Is there a way to change the settings of the application running?

  Is there a way to change the settings of the currently running application level (those specified in the ADF - config.xml)
  
  Published by: user10047839 on 15-giu-2012 2.37

  Hello

  a glance at the JavDocs (http://docs.oracle.com/cd/E23549_01/apirefs.1111/e10686/oracle/adf/share/config/ADFConfigImpl.html) tell you: No.

  Frank

• Is there a way to restore the system to factory setting

  Original title: Reinstalling windows

  I would like to restore or reinstall the system on my computer because my computer appears to be infected with the virus and there are a lot of problem with the system as impossible to install net framework. I have never create any point before restoration, and the recovery of the manufacturing company (Acer) tool does not work for reasons unknown. I would like to know if there is a way to restore the system to factory setting. And also, if I have the windows 7 key product that comes with this computer (I think that its probably an OEM product key), what I have to buy a new key of product if I reinstall windows 7 on this computer?

  Thank you for your reply,

  However, I tried with the Acer eRecovery Management and there are two problems:

  • I open Acer eRecovery than Management with System Manager. When I click on restore or create Factory default disc, it says please wait and there is an infinite loading.
  • Also, when I use Alt + F10 to open, it says please complete operating system configuration process.

  Scores of recovery and/or access to them can get damaged.

  As the partition recovery is photographed on the hard drive by Acer in the manufacture of your machine, we have nothing to do with changing/fixing this recovery process once there are problems with it.

  As you have a preinstalled OEM license (Acer, Dell, HP, etc.), contact the manufacturer of your computer to order recovery media that they need to provide for a fee.

  Or you can also borrow the same exact retail edition DVD of Windows 7 and use your product key to reinstall.

  But Acer does not normally keep recovery disks for you to buy for older operating systems, so it comes down to borrow the exact same edition of Windows 7 DVD to a friend, etc. and by using the product key on the COA sticker on your machine.

  This is what looks like a sticker of COS:

  

  @@@@@@@@@@@@@@@@@@@@@@@@@@

  Your other option to continue to use the machine is to remove malicious programs that infect your machine:

  See if this helps you:

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware and if necessary do in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  'Advanced options boot (including safe mode).

  http://Windows.Microsoft.com/en-us/Windows/Advanced-startup-options-including-safe-mode#1TC=Windows-7

  _______________________________________

  And also scan with the free version of SUPERAntiSpyware

  http://www.SUPERAntiSpyware.com/download.html

  SUPERAntiSpyware Free Edition is 100% free and will detect and remove thousands of Spyware, Adware, Malware, Trojans, KeyLoggers, Dialers, Hi-Jackers, and worms. SUPERAntiSpyware features many unique and powerful technologies and removes spyware threats that other applications fail to remove.

  SUPERAntiSpyware Free Edition does not include blocking in real time or scheduled scan.

  ______________________________________

  It is a very good program to scan your system to remove adware, etc.:

  http://www.bleepingcomputer.com/download/adwcleaner/

  AdwCleaner is a program that finds and removes the Adware, toolbars, potentially unwanted programs (PUP) and browser hijackers from your computer.  Using AdwCleaner you can easily more of these types of programs for a better user experience on your computer delete and while browsing the web.

  _____________________________________

  And just to be sure, nothing is lurking in the background:

  'TDSSKiller Rootkit Removal Utility download for free'

  http://USA.Kaspersky.com/downloads/TDSSKiller

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Once you are sure that the malware is removed, check the system files.

  The problem can happen however is that if SFC is install system files that are corrupted, you may still borrow this disc of windows 7 to solve this problem by performing a repair upgrade.

  "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  See you soon.

• Is there a way to change the settings of video card with PowerShell?

  Hello

  I am updating multiple virtual machines to the new tools and the hardware upgrade to v7.  Several have 4 MB video RAM, and I want to change this to Auto-Detect.  I use Set-NetworkAdapter change a vmxnet3 adapter and hoped there was a cmdlet "Set-VideoAdapter' to change the video, but that does not exist.  Is there another way to set the video card with powershell?

  See change VM memory video Alan.

• Is there a way to read the settings in a .pst file?

  Hi all!

  I looked everywhere for info on this and found nothing. Anyone know how to read the settings contained in a .pst file? I found some that I really like, but would like to know what they are doing. In other words, what are the different used FX and what are their settings? I would use some other users have created as a starting point to create my own channels of FX. Open in a text editor doesn't show something like:

  @^@^@D^@^A^A^@^@^@^@^KEMAGPPST^@^@^A^H^@^@^@^@Âp^@^@^@^@^@^@^@^@^@^@^@^@^@^@¿< 80 > ^ @^ @^ @^ @^ @^ @^ @^ @^ @^ @^ @^ @^ @^ @? < 80 > ^ @^ @@ ^ @^ @^ @

  Is there a way to show somehow what they do and what they use the settings?

  Thank you!

  You're right, the settings file contain only of the code when opened in a text editor.

  But why don't you just open settings in a project, this way of seeing exactly what Plugins are loaded. Opening of the plug-in window will show you their parameters.

  The only restriction is that GarageBand has only a limited view of Plugin window which can not show all settings. To do this you must open in Logic Pro X.

  Hope that helps

  Edgar Rothermich - LogicProGEM.com

  (Author of "Graphically improved manuals")

  http://DingDingMusic.com/manuals/

  "I could receive some form of compensation, financial or otherwise, my recommendation or link."

• Is there a way to export the settings of the workspace?

  The problem is that I work with a configuration of two monitors. One is the real canvas with a painstakingly built provision of the panels, the other has a window synchronized with a preview in full screen. Every once in a while I accidentally close the window of work area, and because the bridge only registers a 'current state' in workspaces, my window carefully designed just disappeared, poof (sound effect, no slang).

  I know that I can save a double workspace. That makes it a little easier, but I must still remove the space of shoddy work and create it again as a copy of the duplicate. This, coupled with the fact that the first step in any troubleshooting on the bridge is to nuke all the settings, hurts a little uncomfortable with the solution.

  I would be very grateful if anyone knew a way to export the workspace settings so I could just load back in when I mess up or bridge only.

  ~/Library/application support/Adobe/Bridge CS5/Workspaces/YourSpaceName.workspace

• Is there a way to view the settings for a file that has changed?

  I know that you assume that to do all you edits in Lightroom, but sometimes, I have always used Bridge and make any changes. Is it possible to see which files have different changes, I get this error when I try and register in LR, but it doesn't tell me what files?

  

  I was watching my email and vinsolo have got the right answer, but removed his response. There is an arrow in the upper right corner with lines above him that indicate which file has been changed outside LR. It's so light and small on my computer that I missed. Thanks, Vinsolo!

  

• I have deleted a default action of the list in CS6. I can't be sure. If so, is there a way to restore the complete set by default?

  Need help?

  Can you go to the menu of Panel (top-right) for Actions and try "reset the Actions?"

• Is there a way to change the camera settings if you do not see your own face?

  It may be a stupid and obvious question, but is there a way to change the settings of the camera on Skype, so you can see the other person and not yourself? He kills sort of the illusion of a conversation face to face when you have a clumsy mirror of yourself that you can not get rid of! I looked online for help with this and found nothing, and minimizes the cheat only I understand Skype altogether and end up with only a tiny picture of the other person. Looks like there must be a better way!

  Thank you!

  There is no option to remove the image of P - P yourself, but if you click on this image it will reduce to a small thumbnail image.

• Is it possible to restore the settings to default authorization/owner?

  is there a way to restore the registry key by default authorization/owner settings? > properties > Security > I tried to go back and not back to the original, but no, no chance.  therefore now not able to: connect to the internet. "Remove all and reinstall windows; restoration; updating the system and most likely.  Do not know what is the best solution... :-(

  Windows 8

  ENJOY IT!

  Original title: restore owner + permission changes to the registry

  Hello

  You could try doing a right click on your COMPUTER C:\ drive and selecting the SECURITY tab.

  Click ADVANCED in the bottom and take ownership of the whole partition\drive with ALL the permissions...

  Are you the owner... It will not go back to the default of origin, but hopefully everything should work

• Is there a way to restore deleted pictures via lightroom?

  Hello world... I would like to you know a way to restore a few photos.

  1. I had copyed pictures from the camera to my computer

  2. I imported the copy (which was on my HARD drive) of the images in Lightroom (ver.3.3 or 3.0)

  3. I accidentally deleted the original files.

  4. but I found there are still copies of these pictures inside the Lightroom

  5. the photos can be zoom in and out and even turn! In other words, that there is a kind of backups of the original files.

  6. I don't care about the quality, but I really need to restore these images.

  7. is there a way to restore the images?

  I'll post a sample of what I wanted.

  

  See? It is a picture of my little girl. Even if I deleted the original file, I can make bigger it and even rotate.

  It shows only an error message that the file is not there.

  This means that there must be a sort of a backup of the original flles. So please help me to recover these photos

  anyway.

  PS) I know how to capture the screen and I keep this as a final way to get the pictures.

  I used some data recovery programs to restore, but did not-_ -

  LRViewer is the program that can extract previews LR http://basepath.com/ImageIngester/LRViewer-info.php

• I found the track record, when I deleted it I lost all my videos folder, and when I checked in the Recycle Bin that they were not there.is there a way to restore?

  Original title: restore the follow-up case

  am usind windows vista and I found the track record, when I deleted it I lost all my videos folder, and when I checked in the Recycle Bin that they were not there.is there a way to restore?

  Hello

  Once removed the HDD data can't be recovered. However, you can use your favorite search engine to browse third-party data recovery software and use this software to recover data.

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  You can also view the following link to recover lost or deleted files and try the steps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/recover-lost-or-deleted-files

• Is there a way to restore a SINGLE FILE in a folder deleted from the Recycle Bin?

  Suppose that you remove all the contents of a folder that contains the files and subfolders. If you open the Recycle Bin, you can see a list of deleted files and subfolders, but there is no way to see the files in the subfolders. So, if you want to restore ONLY a single file in a subfolder of the deleted, it seems there is no way to do it. You can only restore the entire sub.folder, which is not necessarily what you want, especially if you filled out the application parent with other files and subfolders after the deletion.

  Is there a way to restore a SINGLE FILE in a folder deleted from the Recycle Bin?

  Another method would be to drag the folder to the Recycle Bin on your desktop. Open it and recover the files required - re - delete the folder.

  @ Palcouk... you can actually retrieve files deleted, even when they are home to recycle the locker to restore a previous version of the folder parent; These come available restore points so not always guaranteed, but he made the most of the time if action is taken quickly enough. :) Ric

• Is there a way to reset the parameters of an inner glow effect changed the default settings, Illustrator CC 2015?

  Is there a way to reset the parameters of an inner glow effect changed the default settings, Illustrator CC 2015? Every time I have to create and apply settings for an effect Illustrator crashes on them the next time I want to create a new effect. Can I reset their value by default without quitting smoking and redtarting the program?

  Thank you

  DC

  I don't know. Best thing to do is to click on the effect in the appearance Panel, and then change the numbers 75% &.07 inches.

  I really recommend to avoid using an inner glow altogether. You have more control and creative options by adding a line and a Gaussian blur and using the appearance Panel. You also does not slow down your computer like by stacking of multiple instances of internal flow for example a brighter glow.

  If you still wish to continue to use the inner glow, you can make a few graphic styles and add to your library to quickly switch your inner glow settings.

• Is there a way to export the new settings customizable toolbar to my laptop?

  Is there a way to export the new settings customizable toolbar for my laptop?

  Thank you, Tom

  There is no automatic way, but this might work: in the "Customize toolbar" window, select "Save Preset," save your settings to a file and then move it to your laptop through the method of transfer of file of your choice. Then on your laptop, simply "Load Preset" from the same window.