Is there an SSH for Cisco LMS interface?

Similar Questions

• Is there a breakdown for Cisco bug ids?

  I'm curious to know what are the values of the id of the bug.  For example.  All bug IDS begin with the CSC followed by two letters and a series of numbers.  The two letters represent something beyond the unique values randomly?  I was hoping that by looking at the release notes for a new version of the code, I could easily identify what kind of bugs have been fixed.  More specifically, in my case, I want to identify easily if security vulnerabilities have been fixed in a version of particular code without having to maintain an exhaustive list of all security bugs.

  Hi Dave,.

  I'm not aware anyway to easily accomplish what you want.  Here are the options I can think of:

  Bug ToolKit (known affected Version)
  Note of support for the SW version (OPEN / closed caveats)
  Notice of security itself.

  Not much can be taken from the id of the bug itself.

  Best regards

  Ben Solero

• It is recommended to have a vulnerability for Cisco ASA device scan.

  Dear everybody.

  I have a doubt about the analysis of vulnerabilities for Cisco ASA device. Currently we have a vulnerability to network devices include firewalls. But after race for cisco ASA vulnerability scanning, found nothing in the analysis report.

  Is it is recommended to have a Cisco ASA vulnerability scanning and it will defeat the purpose of the firewall?

  I do not understand you ask you can set the ASA to allow an external user, run an analysis on the internal network?

  If so the answer is generally no. The ASA, by default, not allow incoming connections (or attempts of connections) that are not explicitly allowed in a list of inbound access (applied to the external interface). In most cases there should also be (NAT) network address translation rules configured.

  If you had a remote access VPN, you can allow external scanner to connect through that, then they would have the necessary access to analyze internal systems (assuming that allowed VPN access to all internal networks)

• Is there a camera for Mac utility?

  Is there a camera for Mac utility?  If so, can you give me a link?

  Cisco has not created but a utility that works with mac operating systems. You can try to check commercial 3rd party across the net.

• NEMA OUTDOOR FOR CISCO AP 3702

  Hello!

  One of my clients want to settle and NEMA (enclosure) for cisco AP 3702 OUTDOOR, but I can´t find the part number to order it!

  Can someone tell me if there is a reference number? I found http://www.terra-wave.com/cisco-3702e/http :// www.terra-wave.com/cisco-37...

  but obviously not cisco.

  So I guess the question is: cisco cell of this Articles? If yes where can I find part numbers?

  Thanks in advance

  You're right, Cisco does not. In this document, they recommend one of the following providers:

  http://www.Cisco.com/c/en/us/TD/docs/wireless/technology/apdeploy/8-0/Cisco_Aironet_3700AP.html

  Third-party sources for the envelopes of NEMA type include:

  www.oberonwireless.com

  www.sparcotech.com

  www.Terra-Wave.com

• SSH to the external interface

  How to configure ssh on the external interface of the asa? I have defined an applied, external interface access list, but it did not work for some reason any

  Here is a list of access

  interface GigabitEthernet0/1

  nameif outside

  security-level 0

  IP 10.254.17.9 255.255.255.248

  !

  interface GigabitEthernet0/2

  No nameif

  security-level 100

  no ip address

  !

  interface GigabitEthernet0/3

  EIGRP 2008 description

  nameif eigrp

  security-level 100

  IP 10.40.50.65 255.255.255.252

  !

  interface Management0/0

  nameif management

  security-level 100

  IP 192.168.251.1 255.255.255.0

  management only

  !

  boot system Disk0: / asa821 - k8.bin

  passive FTP mode

  access-list 110 scope ip allow a whole

  NAT allowed ip extended access list a whole

  allow_ping list extended access permit icmp any any echo response

  allow_ping list extended access permit icmp any any source-quench

  allow_ping list extended access allow all unreachable icmp

  allow_ping list extended access permit icmp any one time exceed

  allow_ping list extended access udp allowed any any eq isakmp

  allow_ping list extended access allow esp a whole

  allow_ping ah allowed extended access list a whole

  allow_ping list extended access will permit a full

  allow_ping list extended access permit tcp any any eq ssh

  access-list extended ip allowed any one sheep

  icmp_inside list extended access permit icmp any one

  icmp_inside of access allowed any ip an extended list

  pager lines 24

  asdm of logging of information

  Outside 1500 MTU

  EIGRP MTU 1500

  management of MTU 1500

  no failover

  ICMP unreachable rate-limit 1 burst-size 1

  ICMP allow all outside

  don't allow no asdm history

  ARP timeout 14400

  Global 1 interface (outside)

  Access-group allow_ping in interface outside

  Can't say I've seen this before, but SSH is easy to do on the SAA.

  I recommend you to take out the first interface access list to see if that would be it.

  You have published only a partial section of the config, but make sure you have the SSH command with the address of the subnet that you connect from. Your config is no longer visible as I type this but try "SSH 0.0.0.0 0.0.0.0 outdoors. This allows all subnets access to the external interface. This command works as an access list to restrict connectivity to approved subnets. i.e. ' SSH 10.0.0.0 255.0.0.0 out "only allow hosts on the 10.x.x.x network to connect via SSH.

  Turn 'debug ssh' to see what errors are too.

  And, you can always remove your keys (related encryption rsa key) and rebuild their return (encryption key generate rsa 1024 mod gen). This will make your ssh client, I use PuTTY, think that this is a new feature and invites the OK to connect.

  Good luck.

  Kevin

• Unable to SSH for outside the router No. 2851

  Hello

  I want to SSH to the external interface of our router No. 2851.

  SSH works fine on the internal interfaces.

  I have install the ACL is access (1 applied to the vty line and one to the external interface).

  The configuration looks like the following:

  line vty 0 4

  access-class 102 in

  30 logout-WARNING

  length 0

  entry ssh transport

  access list 102 permit tcp any gt 1024 any eq 22

  Outside_ACL extended IP access list

  permitted tcp and gt 1024 no matter what eq 22 log

  Is there anything else that I should consider when setting up SSH on the external interface?

  TIA,

  Michael

  Michael

  I notice that there is a card encryption on the interface (I have would have supposed of your previous comment that you access the router via VPN) and I wonder if it is possible that SSH entering your remote address is considered to be entering the card encryption VPN traffic. Could you try the external address of some other address source SSH and see if that changes things?

  Or can you provide details on what is in the card encryption - and perhaps think about putting something in the map encryption that would exclude SSH to the external interface.

  HTH

  Rick

• How can I close the module if there is an error of LMS?

  Hello

  How can I close the module if there is an error of LMS?

  When there is error with LMS, and when the user clicks the "OK" button in the module is closed

  

  

  Find the function in the scormdriver.js and modify as follows in bold:

  function DisplayError (strMessage) {}

  var blnShowDebug;

  WriteToDebug ("in DisplayError, strMessage ="+ strMessage);

  blnShowDebug = confirm ("year error has occurred: \n\n" + strMessage + "\n\nPress"OK"pour display information to send to technical support for debugging.");

  If {(blnShowDebug)

  DoCPExit();

  ShowDebugWindow();

  }

  }

• Is there a HCL for USB?

  Hello

  is there a HCL for USB, install ESXi 5.1 on it? I want to assure you, that I have allways have a supported vmware environment.

  Thanks and greetings

  Michael

  Yes, see this article;

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1021345

  With the help of USB devices that are not in the list of devices supported

  If a USB device isn't on the list supported, set up a test environment with ESX/ESXi hosts and virtual machines to reproduce your production environment. Set the USB to the ESX/ESXi host and add it to the virtual machine. If the operation of the USB device works as expected, you can attach the USB device to a host ESX/ESXi virtual machine and production.

  These USB devices are not available for passthrough:

  • USB devices such as mice and keyboards that have a HID bootable interface.
  • USB devices such as cameras video real-time and audio devices that use isochronous data transfers.
  • USB devices that installed an ESXi host. For more information, see VMware for devices USB/SD used for the installation of VMware ESXi (1010574).

  Post edited by: jrmunday

• CP can send a pass mark for the LMS when the user reaches a specific slide?

  I use CP 6.1 and I was wondering if there is a way I can set my parameters of reports to send a pass mark for the LMS when the user reaches a specific slide?

  

  I don't want to 'pass' to be determined by a Quiz. I want to be determined by slide views or the number of slides. I want a "pass mark" to pass to the LMS only when the user reaches a SPECIFIC slide. Is this possible?

  Not with the views of the slide. It would not be acceptable to have an object on this slide, the user should click on? And then require a score equal to one set to this object (button, button shape, click box or even a text entry box)?

• Is there an API or the open Interface to convert price lists?

  Hello
  
  Is there an API or the open Interface to convert price lists?
  
  What are the additional configurations you need to enforce price lists?
  
  IM new Advnaced price and order management.
  
  Thank you and best regards,
  
  MPH

  Ignore the first API you mention who has a different goal. Personally, when I load the price lists I always use a loading rather than an API tool, but if I had a large number of large lists of price, I'd probably use this API, as seems to be better supported and documented by Oracle:

  (Note 435473.1 on MOS)
  [url https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=WHITE%20PAPER&id=435473.1] QPXVBLK: Pricing of bulk loader API including PS data: import of the details of implementation of price list and examples of Scripts block

  ... and there are many examples of scripts to help you here (Note 360060.1 on MOS)
  [url https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=SAMPLE%20CODE&id=360060.1] QPXVBLK: Price list in bulk Loader example for 11.5.10 Scripts free

  Kind regards
  Jon

  PS... and Yes, it works for 11.5 per 12.1.3 notes above

• Are there any available for the Mac Pro 2013 SSD expansion?

  Are there any available for the Mac Pro 2013 SSD expansion?

  I would like to increase my 1 or 2 GB of storage internal if possible.

  https://eShop.MacSales.com/shop/SSD/OWC/Mac-Pro/2013

• Hi all OneHow can you buy an IBook UK not available in Indian store a store; When you change the status of your country, your billing information and credit cards won't work; is there a solution for this using the same method of billing.

  Hello world

  How can buy you an IBook of UK not available in Indian store a store; When you change the status of your country, your billing information and credit cards won't work; is there a solution for this using the same method of billing

  There is no solution, if it is not available in your area, you can't buy it.

• Are there external speakers for iPad mini to improve the sound?

  Are there external speakers for the new iPad mini to improve the sound?

  There are hundreds. For most Bluetooth, so they're wireless. Simply do a search, starting with those on the Apple Store.

• How remove the toolbar Babylon. Is there another name for "Babylon"? because I don't see a "Babylon" in my control panel, of it being installed? Help

  I would like to get yahoo as my home page. I tried to change, according to the instructions of mozilla. It did not work.
  By mozilla support I uninstall "babylon toolbar". I checked the Panel no Babylon not listed as being installed. My question is there another name for the "babylon toolbar?

  I'm of Babylon business support team. Research of Babylon and the toolbar are supposed to be part of an integrated set of tools that help people understand and explore their world. Sometimes, however, other manufacturers package our tools with their free end of programs and by unexpected people receive our software. We are sorry if this is the case with you and we would be happy to help you remove a part that you can not. Click here for easy removal instructions: http://www.babylon.com/uninstall_search/index , or contact me at [email protected] for more information.