iSCSI and Fibre Channel on the Dell PowerVault MD3000 SAN shaerd with 2 physical servers

Similar Questions

• I have problem with Muse files when you work at home with my laptop and when I open the files again in my work with my IMac.

  I have problem with Muse files when you work at home with my laptop and when I open the files again in my work with my IMac.

  I do: when I am uncomfortable with the laptop I save the files on the laptop, then on my external hard drive. Then, when I'm at work, I opened the drive, but the Muse says every time, that so many links in the 'active' is missing. And it takes a lot of time to get all the missing link. Like today I had to open a file of Muse from the external hard drive, and there are about 100 links that are missing.

  How can I solve this problem

  the best thing if you are a user of creative cloud is to store the files in a folder in your account of cloud instead of transferring the files from one computer to another.

  If you are not a Subscriber cc then Dropbox or iCloud will work as well.

• Emulator of the UCS and Fibre Channel (PCI Passthrough)

  Hello

  I would like to know if anyone of you knows if emulator UCS supports CF communications and how to configure them.

  I have 2 PCI Fibre Channel interfaces on the host Hardware and I applied PCI Passthrough on the ESXi hypervisor. It works with other virtual machines.

  Thank you very much

  Francesco

  No, unfortunately not.

• How many times can I use the Dell restore cd that came with my system?

  I ran the cd of restoration over 3 times and nothing has changed that I have I'm restoring an old dell dimension xp. I thought that this would erase it clean and set of parameters by default now I can't boot the OS and not much has changed. I get a blue screen with an error message window was closed to protect the computer and search for viruis.  I found my way in the tree view of the symptoms and I've been running tests, I don't know if this will help, and I still really need help because I am very new to the use of this forum, and now I'm tender hand on this Mac laptop. Boy, any help would be greatly appreciated this whole thing with computers, it's a change of lifestyle.

  A Dell Dimension 4700 Series are of desktop computers; and, as such, do not come with wireless capabilities.

  Connect with an Ethernet cable to your router.

  If you want to use a wireless connection with it, you must either purchase a Wireless USB adapter or a card PCI of Wirelesss.

  Here is an example of both:

  USB adapter: http://www.dlink.com/products/?pid=722

  PCI Wireless Card: http://www.ebay.com/sch/i.html?_nkw=wireless+PCI+card

  And here's all the information from Dell on Dell Dimension 4700 series.

  http://support.Dell.com/support/eDOCS/systems/dim4700/en/OM/Y69490LRs.PDF

  And it can help, too (Service Manual):

  http://support.Dell.com/support/eDOCS/systems/dim4700/SM/index.htm

  See you soon.

  PS You are welcome, the ROCKS of XP

• Dell PowerVault MD3000 [SD]

  One of the drive in the array is failed. I need a new. I have the Logs MD3000 file if you need it.

  Dear client,

  Con passing it mouse sopra identifier c Supporto Dell'e the voce "private message", it could mandarmi UN privato con message it SERVICE TAG del MD3000.

  Nel caso in cui as aver need di assistenza telefonica is Pagaré a ticket di Assistenza.

  SE if need di una delle quotazione left in sostituzione can rates UN preventivo senza Pagaré the assistenza.

  By request, we have our o di need any it client codice di vecchia quotazione o.

  Nel caso in cui non his di queste information times need che compilasse i seguenti campi:

  By the spedizione:

  1. company name:

  2 address:

  3 City:

  4 Provincia:

  5 cap:

  6 name/last name/number phone/e-mail del referent in loco:

  With the fatturazione (is different)

  1 nome società (is it client code):

  2 via:

  3 City:

  4 Provincia:

  Heading 5:

  Name/last name/number 6 telephone/e-mail del referent by the fatturazione:

  7 partita IVA

  Speaking saluti

  Domenico Severino

• What is and how to use the dell owner connector 6-pin

  I have a Dell Optiplex GX280 minitower with a 250W dell power supply. I can't understand what good is it for or the use of this connector dell owner 6-pin (additional adapters or something). Impossible to find reliable info on this topic, maybe you can help me with this one? Just in case, I've attached a picture to me clear.

  

  Mini-Tower (page 112) The DC power supply connector pin assignment:

  DC Power Connector P4

  Identification number	The signal name		Wire 18 AWG
  1		N/C
  2	COM		Black
  3	COM		Black
  4	+ 3.3 VDC		Orange
  5	+ 5 VDC		Red
  6	+ 12 V DC		Yellow

• A few .msg and .eml files display the contents of gibberish when opened with Internet Explorer

  Facing an Intermittent problem with Internet Explorer.

  Some of the .msg and .eml files do not open with outlook as the default program when opening with Internet Explorer. Downloading these files opens files directly with Internet Explorer and displays the contents of gibberish.

  Abdenour Hello,

  Thank you for the update.

  I appreciate your efforts.

  Please refer to the suggestions of Deepa Raj replied on 24 February 2013 and check if that helps.
  http://answers.Microsoft.com/en-us/Office/Forum/office_2010-Outlook/unable-to-open-msg-files-in-Explorer/a9841e83-89b7-451D-8bd0-6d1bef4e14fd

  Please keep us informed.

  Thank you

• Problem with XServe and XServe RAID via Fibre Channel

  Hello everyone,

  I have a problem with my blended Xserve RAID.

  I see in RAID-Admin and configure it successfully (via Ethernet). Connect with our Xserve via Fibre Channel, but the XServe and XServe RAID do not detect each other.

  The fiber on the Xserve channel LEDs are white on the Xserve RAID completely off and permanent.

  RAID-Admin status of Fibre Channel: 'No connection (1 table)' with a red square.

  If I try to open the utility of fiber channel I get the message: "card Fibre Channel is not found." Utility disk OS X can't, too.

  I changed the card connector cable, and made several reboots. But each time the same thing: they do not detect each other.

  Xserve (2009):

  -2.26 GHz Quad-Core Intel Xeon 5500

  -Map of Apple dual-channel 4 Gb Fibre Channel (LSI7204EP)

  XServe RAID:

  -RAID 5 in an array (only on the left with 5 x 500 GB)

  -1.5.1 Firmware

  -Cable Apple 4 Gb SFP - SFP

  Thanks for your help and sorry for my bad English!

  Hi Mpm-Mainz,

  Check if you have enabled LUN masking. To be able to see, you will need to download raid admin 1.5 not the 1.5.1

  Xserve RAID Admin Tools 1.5

  Have you also tried to use the other controller? Even if there is no disc in there, then it should appear in the preferences of fiber card system.

  Thank you
  Owen

• A system totally crashed after downloading the update of windows 7 (from VHP) reloaded vista starting the Dell restore partition and reattach the requirements. Now, how can I restart upgrade

  OK, here's the deal... the Dell laptop had a recurring software validation fixed an error that I couldn't keep. I would fix it, Vista should go out and update itself and then I would reboot and bang, back right to the error again, I decided to scrap Vista and install W7. I corrected the error again once restarted in a stable Outlook, downloaded files of Windows 7 upgrade and then discovered that the netframework wasn't right, so I downloaded this solution, am to halfway through it and got a system error. HA! I'll just copy this download upgrade of the window on a USB key, hover over all my personal files on the usb drive, and reinstall Vista from the Dell partition, which I did. Then, I updated all the stuff with the Advisor to upgrade of windows, is gone in Windows 7 upgrade file I moved it to the USB and realized that this point in time, I was an asshole. What a breakthrough!  OK, now how to restart the upgrade process. I paid the money, done the downloads, message, so my hands, discussed and done all the other stuff I've done since the upgrade of Windows 3.1 (each time). Now what...

  First I would contact the people who sold you download and see if they will send again free of charge - explain the problem.  I guess you still have the product key, they have sent you that shouldn't be a problem (it will work with any download the same version of Windows7).

  Then run Windows7 Upgrade Advisor to see if your system can handle Windows7 or if she need for software or material removed or updgraded: http://www.microsoft.com/windows/windows-7/get/upgrade-advisor.aspx.  Follow the instructions he gives as a result of the program (in fact, you should do this first - then you can deal with the download).

  After that, you need to further questions in the Windows7 Forums: http://social.answers.microsoft.com/Forums/en-US/w7install/threads where people who specialize in the installation and upgrade to Windows7 will be more than happy to help you in the process.  This is a forum for Vista, and you need to talk to experts in Windows7.

  I hope this helps.

  Good luck! Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• CS3 - adjustment of the left and right channels of an Audio track separately

  I think it's a very stupid question.  I know how do in Avid and FCP, but for the life of me can not understand at first.  I cut a clip and laid it on the timeline.  Now I would like to adjust the audio levels of the clip independently, but there is that one line, passing through the audio clip, and it adjusts the L and R channels at the same time.  Nowhere, not even in the track properties, can I select only the L channel or R channel alone and make this channel upwards or downwards a little without affecting the other.  L and R are grayed out and not selectable.  The properties of the show clip it is stereo, the project settings are stereo, and I was not able to find any info on this problem in the forums here or in the help tool.  Except for something 2 I fell that said that we must go in the settings of the Master Clip and create Mono 2-track stereo channels until you place it on the timeline, but it would be crazy to have to do this for each stereo clip you import ever!  And that makes no sense - "mono" means 2 channels are the same, how can you have two channels "mono"?  What would be the purpose, you only need a "Mono" channel to go to your 2 speakers.  And I don't mean each mono channel to do in any case, I want it to go to the left and R only go towards the right side channel L!  Maybe they use bad word "mono"?  Or maybe I'm a fool and quite simply do not get something (most likely).

  In any case, I'm really confused here, especially because I can't believe that you go through all these steps for each unique stereo clip you work one day with... I must be missing something really simple, right?

  IN SUMMARY:

  I capture a stereo clip HDV

  I have load to the Source window

  I got a point in and an out-point

  I insert my clip on the timeline

  I noticed the channel audio left is too high and the right audio channel is too low

  How to lower the left channel and raise the right channel?

  Stupid question, I know.

  In Avid or FCP you go to audio level "line through the center of each channel and adjust at your leisure

  TECHNICAL DATA:

  Windows Vista (with latest updates)

  Premiere Pro CS3 (with updates)

  Intel Core Duo 2.8 Ghz processor

  2 GB of Ram

  NVIDIA Geforce 9500 series (I think)

  Intel integrated audio system

  External USB hard drive holds my media/project files

  Sony HCR9 connected via firewire for capture

  Stanley,

  I do similar, but separate channels in hearing and import the mono files resulting in PrPro.

  Good luck

  Hunt

• Fibre Channel frames - UCS

  I was wondering if it really is possible to have the Fibre Channel frames running on a UCS?

  I read these two articles that provide some great information on the implementation of the Fiber Channel Jumbo and Jumbo frames:

  http://datacenteroverlords.com/2013/04/01/Jumbo-FC-frames/
  http://www.ccierants.com/2013/10/CCIE-DC-definitive-Jumbo-frames.html

  Everything in the SAN I'm administration has the ability to set the MTU value until 9036 except for the UCS. For example on NetApp train I can set the MTU by interface on the Cisco MDS I can set the MTU by vsan. However in the UCS Manager when I go to class of service of system quality, the option to set the MTU of Fibre Channel value is grayed out and it doesn't look like there is in any case override the preset frame size. I can set the MTU of the best Effort however my understanding is traffic Fibre Channel in the UCS will use the class system of Fibre Channel.

  Also I noticed that I can set the maximum size of the data on the vHBA field in the UCS Manager but my understanding is the maximum that can be up to 2048.

  Hello

  Have you checked

  http://datacenteroverlords.com/2013/04/01/Jumbo-FC-frames/

  Erik Smith says:
  17:52, 1 April 2013

  April fool! I wish I saw this earlier, I would have posted corroborating results!

  In short: Forget the CF frames!

• measure with the two channels of the virtual bench simultaneously in labview, error 375903

  Hi, I am trying two measurements simultaneously using two channels of analog input of the virtual bench. I chose the channel MSO 1 and 2 for the measures but I get error 375903 returned evewry time say the requested resource is reserved. I'm not under any other software which should use the virtual bench. The error occurs when I'm initializing the session, even before a measurement was made. Can someone tell me how to call each channel so that I don't get this conflict of resource reservation?

  I have included the VI and a screenshot of the error.

  Thank you!

  NGKai wrote:

  Hi, I am trying two measurements simultaneously using two channels of analog input of the virtual bench. I chose the channel MSO 1 and 2 for the measures but I get error 375903 returned evewry time say the requested resource is reserved. I'm not under any other software which should use the virtual bench. The error occurs when I'm initializing the session, even before a measurement was made. Can someone tell me how to call each channel so that I don't get this conflict of resource reservation?

  ASM takes only supported a session unique instrument and your VI uses two. To use both channels, delete the second session MSO and specify channels in the MSO configure Analog Channel.vi

  Here's an example that uses two channels brought:

  VirtualBench: Bode Analyzer with the FGEN and MSO

  http://www.NI.com/example/52076/en/

• "The Dell Dock language file, which is necessary for its operation, has failed to load. Please check your Dell Dock installation"

  Original title: Dell Dock

  Get a message saying: 'the Dell Dock language file, which is necessary for its operation, has failed to load. Please check your Dell Dock installation

  Try this for the restoration of the system to Vista before the problem:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://www.DellDock.com/

  Above is the link for redownload for him, if necessary.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_technical_support

  Contact the Dell Support link re problems with their software above.

  See you soon.

  Mick Murphy - Microsoft partner

• Not able to install a driver downloaded from the dell website get the message "you must have administrator rights to complete this operation".

  Original title: request administrator access but already an administrator!
   
  Hello
  My Dell inspiron 1440 laptop has intel gm 45 carte_video. I downloaded the driver from the dell website. But whenever I want to install this driver according to halfway, it displays error and say you must have administrator rights to perform this action. But I'm already administrator. I tried right click and press run as administrator. I tried safe mode. I don't have a single account in my laptop. This shows administrator account and I do not have any password for my administrator account. None of my efforts working!. I'm using Vista premium service pack 2. any help from anyone? It would be helpful if someone can give suggestions. Thank you

  Hello

  This must be different. Rest assured that we would do our best to help you with this problem.

  Please answer the question that helps us provide a better solution.

  Were there any changes made to the computer before the question?

  Try these steps and check:

  Step 1:

  Run a virus scanner and check:

  Viruses are known to cause these problems. Scan your computer for the Microsoft Security Scanner, which allows to get rid of viruses, spyware and software malware.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner expire after 10 days from the date of installation.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Step 2:

  There might be corruption of the possible user profiles that may cause this problem. Therefore, try to create a new user account and check if this solves the problem.

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Step 3:

  You can try to download the video driver again on the dell site or check out the following link and check out the video at the following link and try to download the dell driver if you are having problems with the display.

  http://www.Dell.com/support/drivers/US/en/19/Product/Inspiron-1440?~SRD = true & sk = drivers & scat = sup

  Note:  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope this information helps. If you have any questions do not hesitate to answer, we would be happy to help.

• Is it possible to connect two DELL PowerVault MD3200 single PowerEdge R610 Rack Server

  We have the SQL cluster with two nodes (the two PowerEdge R610 Rack Server) connected to the DELL PowerVault MD3200. As we are short on space, the idea came to add additional DELL PowerVault MD3200 to the cluster. Is this possible?

  Hello, IPM.

  Yes, you can add an another MD3200 to your R610 server & get both to work.  As you run lack of space, you can also simply add a MD1200 if just needing space as the MD1200 is cheaper than a MD3200.  The MD1200 will connect via your MD3200 sas & can provide you with the additional disk space if that's what you're looking for.

  Please let us know if you have any other questions.