ISE 1.1.1 Iphones comments CWA connection dropouts

Hi all

I deployed access as guest wireless using the CWA. It's a simple configuration so I did no maintenance or customer provisioning enabled on the deployment. In short my question directly relates to Iphones (I have not yet been tested with other mobile devices). Basically a laptop connects, gets redirected, authenticates successfully and ultimately can browse internet and network resources.

With an Iphone I connect, redirected, authenticate successfully, accept the AUP and finally get a page that says I'm connected and should return my original URL. At this point, I try to open safari by going to the main GUI of IPhone, Wireless drops and falls safari at 3G connectivity. I then go back to wireless connections and click the SSID that immediately reconnects and allows access based on the connection of the moose.

If anyone has experienced this problem and if so what is it apply? Y at - it a setting or the command miss me on the system or is this yet another case of device BYOD was a pain in the back with ISE?

Have you tested this on iOS6? It has a feature that will let down wireless and go to 3G if you are unable to reach the www.apple.com/library/test/success.html, I think it is called auto-join or something? also recently this page done down at apple, and caused a few problems for Iphone/Ipad users, maybe that is what have seen you.

Tags: Cisco Security

Similar Questions

  • Since activation apple CarPlay, my iPhone does not connect to my Bluetooth infotainment system

    I have recently taken delivery of a VW Tiguan MkII 2016 and could easily match my 6 s iPhone with it. Now, however, I created CarPlay Apple and VW car-net connect my iPhone via USB. Now my iPhone is no longer connect via bluetooth when not plugged into the USB port. It seems that I can now use only my phone by CarPlay which I do not plan to use whenever I drive the car. Is there a solution to this?

    Hi biker.

    I understand that as you have activated the Carplay, your iPhone will not connect to your car stereo via bluetooth. You can try to disable the Carplay on the device, and then test the bluetooth connection. Because you are trying to connect via clips and wireless at the same time, this can cause some problems. Using one or the other should solve this problem.

    Please use the Apple Support communities to post your question. Good day.

  • "iPhone is disabled, connect to iTunes" AND "iTunes can not connect to the iPhone because it is locked with a password" error message on the phone and the computer! Help!

    So I recently had my password wrong too many times and my iPhone 4S locked out telling me "iPhone is disabled; Connect to iTunes'. And so I connected to iTunes and decided to restore my phone. I finished the process of restoration of the configuration of my phone, but ultimately, it was not even let me in the phone! Once AGAIN he said "iPhone is disabled; " Connect " to iTunes '. However, this time, this message appeared just when I turned on my phone with a black background. I didn't scan the screen for the error message is displayed (and there was no time to be shown). When I tried to connect to iTunes again as he asked, now it says "iTunes can not connect to the iPhone because it is locked with a password".

    So now, he said "iPhone is disabled; ' Connect to iTunes' on my iPhone 4S and ''iTunes can't connect to the iPhone because it is locked with a password ' on my computer. WHAT should I do?

    As described in step 2 of "Erase your device with iTunes" in this article, you will need to use the Recovery Mode.

    Recovery mode is described in this article as well.  You may try to go into recovery mode more than once to succeed.

    If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

  • image capture does not recognize my iPhone when I connect to my mac?

    I have the iPhone, when I connect it to my photos of mac does not open... How can I put on it to open it

    Hello rosrich,

    If I understand your message that you are eager to the Mac to open Image Capture when you connect your iPhone so that you can import the photos. I would like to have the possibility of having an auto app launch when I connect my iPhone as well. I'll be happy to help you with this.

    If you go ahead and open Capture of Image and then connect the iPhone, in the lower left corner, you will see the name of your iPhone and the "connection this iPhone opens:" you have the option to choose what app that you like. So if you want Image Capture to open when you connect your iPhone, you would select which. If you want pictures to open, you would select Photos instead. Information on the AutoImporter lies in the following article:

    Image capture: transfer images and other elements of your device

    Thank you for using communities Support from Apple. Nice day!

  • iPhone is disabled connect to itunes HOW? Help, please.

    iPhone is disabled connect to itunes HOW? Help, please.

    lyndlebob wrote:

    iPhone is disabled connect to itunes HOW? Help, please.

    If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

  • My UK 6s iPhone does not connect to the network in Germany?

    My UK 6s iPhone does not connect to the network in Germany?

    'The network '? Which network? WiFi or cell phone? And what have you already tried to get connected?

  • My iPhone does not connect to my iMac

    Hi - my iPhone 6 s connected perfectly with my mac through iTunes and load. So I think I've hit the setting do not trust and now it won't connect.

    I tried

    * cable and iMac load ports work fine

    the iPhone through a Plug and my MacBook Air costs

    * In parameters (sync iTunes) it says the iMac is not available

    * I have fed at the same time and restarted with the connected phone or not plugged

    * I tried to reset all settings - nothing

    * I tried to reset the network settings - it asked me if I wanted to trust the computer, he briefly loaded and then stopped.

    What I can do.

    Thanks in advance

    Connect via USB? If this is not the case, do.

    Barry

  • iPhone will not connect to my wifi

    I did no update. This morning all of a sudden my iPhone does not connect to my wifi. As there is a block or? on this subject. Weird

    Hello

    Tap Settings > general > reset > reset network settings

    You will need to re enter your Wi - Fi password in settings > Wi - Fi.

    If this does not help, try here > If your iPhone, iPad or iPod touch connects to a Wi-Fi network

  • iPhone is disabled connect to itunes

    I have an iPhone 5, and for some reason, my friends find it enjoying to lock my phone. Anyway, this time they locked so long that I have to connect it to iTunes to make it work.

    On the phone, he said:

    iPhone is disabled, connect to iTunes.

    But then, on iTunes, it says:

    iPhone could not connect to the device iPhone "iPhone", because it is locked with a lockcode. You must submit the lockcode on your iPhone device to make it compatible with iTunes.

    Please help me!

    iOS: forgotten password or a device is disabled after you have entered the wrong password

    https://support.Apple.com/en-us/HT204306

  • Safari can't open the page because your iphone is not connected to the internet

    Hello

    I had this problem since I updated to iOS 9.3.1. I use mobile data and when I open Safari, it says: "Safari cannot open the page because your iphone is not connected to the internet. I can't find or load pages. However, I can connect using mobile data chrome and other applications such as Instagram etc. Funny thing is when I connect to wifi, Safari will work very well. Help, please. Thank you very much

    I use the iphone 5, iOS 9.3.1.

    Thanks again!

    Use settings - mobile - cellular - data scroll through Safari - is he toggled OFF?

  • my iphone is disabled connect to itunes. Please help me

    my iphone is disabled connect to itunes. Please help me

    Take a look at this Apple Support article:

    If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

  • Did the hey Siri works on an iPhone 6 not connected

    Because of the good work of the Siri app on an iPhone 6 not connected

    Pat,

    No, this feature is not available for the iPhone 6: Siri to use on your iPhone, iPad or iPod touch - Apple Support

    With 6 s the iPhone and more 6 seconds, you can use "Hey Siri" without plugging in power. Learn more about "Hey Siri," like how to put in place the feature.

  • Can I use an adapter of lightning and HDMI with my iPhone cable and connect it to my TV without messing up my AT & T U-verse services?

    Can I use an adapter of lightning and HDMI with my iPhone cable and connect it to my TV without messing up my services AT & T U-Verse?

    Why have something to do with your Uverse services?

  • iPhone does not connect to EA6500 2.4 GHz

    I put it up as Capri (2.4 GHz) and CapriHD (5 GHz). CapriHD has been provided only for HD video traffic. IPhone 4S my wife can only use 2.4 GHz, and he left suddenly after 1-2 months of use. My iphone 5 may use either the band and it can connect only on 5 GHz.  This problem COULD correspond to the recent update of the firmware?  So I traveled a lot around this time can not be sure that it is a culprit.

    Really thought that the problem was the material, so I replaced it with a new EA6500 and get the same result.

    I suspect that the problem could be environmental. Maybe the neighbor something interfering, but I don't you assignment of channel info as we did in the past with older routers, so don't know how to go about trying other things here.

    I found that, by limiting the width and assigning hard channel 11 that our iPhones can now connect 2.4 GHz.  Apparently, something installed neighbors again, and the function of channel AUTO assign the router cannot resolve this conflict.

  • ISE 1.2 does not connect failed authentications on portal comments (CWA)

    Hello

    I think it's a bug but wanted to check, if anyone knows a reason why authentication attempts failed with the non-existing user account are not connected on ISE 1.2 (CWA).

    The various cases:

    Case 1: existing username / password incorrect-> connected

    Case 2: no user / password-> connected

    Case 3: no users / connected without password->

    Case 4: nonexistent user / password-> not connected

    In my opinion, it is critical to be connected because this could be an indicator of a back attack or a password penetration test.

    Thanks in advance and best regards

    Dominic

    check that the bug listed CSCuh49137

Maybe you are looking for

  • Pavilion 15-ab150as: problem of AccelerometerSt.exe

    Hello community HP, hope you know what I have to do. I get the HP Safe Guard error message after every restart, saying: "The program can't start because VCRUNTIME140.dll is missing on your computer. Try reinstalling the program to fix this program» I

  • Spotlight search with iCloud problem

    I want to find emails and notes on my MacBook, I wrote about iCloud.  However on my MacBook if I do a Spotlight search in the iCloud word she includes all the notes, events, reminders, etc. which are saved on iCloud versus showing that the documents

  • ODA IP ASA when you browse the web via remote access vpn

    Hi all I was wondering if it is possible to configure an ASA5510 in a way to allow users remote access VPN use external IP of the ASA when browsing the web. So what I'm looking for is a solution to hide my IP address and use the IP address of the ASA

  • Whenever the Clipboard is used in XP mode, it hangs.

    If I try to copy and paste in XP mode from the host unit drive or if I try to copy and paste from the same drive shared within XP mode, XP mode stops. When he wants to send error report to MS, the error listed is: "BCCode: 1000007e BCP1: C0000005 BCP

  • Telephone directory of TMS export

    Hello world We have a server TMS configured and running, with several pounds of phone manual list. Now, I am deploying a new TMS and configuring everything from scratch (do not use existing databases), including telephone directories. I have re-creat