ISE: advise users that EAP - TLS can only be used

Similar Questions

• Output HDMI on IDT driver version 6.10.6087.0 can only be used for audio?

  my audio receiver has an hdmi output. the driver idt can be used to control the output of the receiver?  I am currently connected to speakers & headset jack, and the only purpose that is to serve the receiver is to amplify the output of the laptop. is it possible to stream the audio output of the receiver through the audio driver of the laptop?

  original title: I am running vista with a driver for version 6.10.6087.0 idt. the hdmi output on this driver can only be used for audio?

  Hello

  ·         What is the brand and model of the laptop?

  ·         Your laptop supports HDMI components?

  I suggest you to contact the manufacturer of your laptop on HDMI audio settings for more information

• Installation of Windows key is no longer work it tells me it can only be used to upgrade not clean the device.

  Original title: Windows key that is no longer clean installs

  I so got my copy of Windows 7 for about 2 years now. I got a full version of Windows 7 OEM (and not an upgrade).

  I've done several installs own all the while to fix bugs, install new hardware or just simply to clean my computer. My product key worked every time.

  Last week my hard drive failed and I replaced it. During the installation of Windows 7 it says that my product key is incorrect, even though it was perfect and I've tried several times. So I checked the option activate later.

  Now, I just got the popup to activate and when I enter my key it tells me that it can only be used to improve and not not clean installs it. I used it for clean installs several times and it was the full version, I bought it.

  What became of my key?

  If the online activation failed activation of the phone, but do not answer all prompts until the opportunity to talk to a real person, and then explain

• ISE 1.4 using EAP - TLS can´t identify user in an ad group

  Hello

  I have a client who wishes to use the EAP - TLS on his Wifi authentication and he wants users in a separate AD Group for the SSID to cooperate.

  I found the solution of operation or with PEAP with EAP - TLS authentication, it does that without the policy of 'ad group.

  Any idea on what I can do to get it to work?

  George

  I found the problem, I had to adapt the 'certificate of authentication Profile' for the AD client

  What made your dot1x in your PC configuration? How the ISE journal watch, when it works?

• How can I be sure that I am the only one using my PC?

  I want to be the only one using my pc. But without my permission (I noticed) that someone else uses it too, how can I stop this?

  Moved from feedback

  Original title: only the user's pc

  Hi Jacob,

  It would be great if you can answer the following questions:

  1. which Windows operating system you are using on the computer?

  2. How do you come to know that someone else uses the computer?

  3. have you created several user accounts on the computer?

  I suggest you to create a password for user accounts, so that no one else will have access to the computer. Check out the link for more information:

  Protect your computer with a password

  http://Windows.Microsoft.com/en-us/Windows7/protect-your-computer-with-a-password

  The article also applies to Windows Vista.

  If you have already created a password, try to set:

  Change your Windows password

  http://Windows.Microsoft.com/en-us/Windows7/change-your-Windows-password

  The article also applies to Windows Vista.

  Please provide details to help you best.

• Windows XP cannot see that the internet can only see LAN

  We have a small network in my house. My router was set to WEP security (I know its too old, but my windows xp laptop computer does not work with WPA or newer). And I also added mac filtering for more security addresses. This network has worked well for 2 years.

  Meanwhile in a cell phone (that has windows XP sp3) so its wireless network broke, and we couldn't get living, then we just plugged on the router via a cable.

  Recently I had to reset my router because I forgot a password and I could add anything to the mac filter list.

  After that, I put at 'the original' for example WEP + mac filtering (only the passwords have been changed).

  Now everything is working fine, 2 laptops (both Windows 7 a), 2 readers, network all our phones smart etc can connect again, the only laptop (with Windows XP) problem.

  The XP laptop can see LAN (two disks) and router only (ping works), but in any browser (firefox, chrome, iexplorer) give me a Web site cannot loaded in the background: error 105, Err_name_not_resolved.

  I tried names ping (google.com) and different ip addresses (for example my ISP dns server address) but I get no answer 100% packet loss. I tried a lot of things that they did not help

  (1) has tried to change my XP for some fix + fix dns ip (I found these adressis in my router configuration/network configuration)
  (2) then I put back to dynamic ip once again in the line of cmd ipconfig release, ipconfig/reset, etc., I checked all addresses was going well everywhere (I mean gateway, DHCP server, dns server, looked well with dynamic ip too)
  
  (3) then I found similar position
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-Networking/cannot-ping-outside-my-local-network/de73a1f9-ef4b-E011-8dfc-68b599b31bf5
  so I tried also what is in the post
  "netsh winsock reset" "netsh int ip reset" then "ipconfig/flushdns" then restart computer

  Nothing helped so I registered here, maybe I answer.

  you might need this information:

  the laptop has Windows XP service pack 3 language _german_
  Cisco EPC2425 router is
  The two networks wdstorage discs + mybookworld... I think they are the two Western Digital stuff. I'm not sure, I can look after if its important (I don't think)
  So, I got two disks still attached. (so 3 connection of the UTP in the router is used, two for disks for the windows XP laptop)

  If something is not clear, ask me please

  
  Thank you for your answer
  Robert

  Hi Robert,.

  Thank you for updating us the status of the case.

  I suggest that temporarily disable you the firewall.

  I recommend you to test name resolution

  A DNS server provides host name resolution. If you cannot connect to a server on the Internet by using its FQDN, there could be a problem with the DNS configuration of your dial-up connection to your ISP or DNS server of your ISP.

  To determine if there is a problem with the DNS configuration of your dial-up to your ISP connection, follow these steps:

  a. at a command prompt, type ipconfig/all, and then press ENTER to display the IP address of your DNS server. If the IP address of your DNS server does not appear, contact your ISP for the IP address of your DNS server.

  (b) to verify that your computer can communicate with your DNS server, ping IP address of your DNS server. The response looks like this:

  Rattling #. ###. ###. # with 32 bytes of data:

  Response to #. ###. ###. #: bytes = 32 time = 77ms TTL = 28
  Response to #. ###. ###. #: bytes = 32 time = 80ms TTL = 28
  Response to #. ###. ###. #: bytes = 32 time = 78ms TTL = 28
  Response to #. ###. ###. #: bytes = 32 time = 79ms TTL = 28

  The series of digital signs (#. #. #. #) represents the IP address of the DNS server.

  If you can't ping the IP address of the DNS server successfully, contact your ISP to verify that you are using the IP address and the DNS server is working properly.
   
  When you have verified the correct IP address of your DNS server, update the settings of your connection to your ISP's dial-up TCP/IP. To change or add a valid IP address for your DNS server for a dial-up Networking phonebook entry, follow these steps:

  a. in Control Panel, double-click network connections.

  b. right click on your Internet connection, click Properties and then click the network tab.

  c. click the Internet Protocol adapter, and then click Properties.

  d. click use the following DNS server address, and then type the correct IP address in the preferred DNS server box.

  e. click OK, and then click OK again.

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• I can only start using the list of Windows XP

  Original title: WINDOWS XP STARTUP W/DISC PROBLEMS

  I have a problem starting my desktop xp computer. I can ONLY start with the XP disk, of course, I have to press 'R' over and over again. After a few tries, it starts well, how can I start up without having to redo this process over and over again. I passed by 'MSCONFIG' and past from NORMAL to SELECTIVE startup and even deleted some programs from my hard drive. I can't make changes without putting in my (domain name Name\Administrator). I don't know what could be and am lost at this point... HELP!!!!!!!!!!!!!!!!

  THOMAS

  Hi Thomas,

  ·         Did you do changes on the computer before the show?

  ·         You receive an error message or error code?

  Follow the suggestions below for a possible solution:

  Method 1: Remove all external devices connected to the computer such as printers scanners or USB external hard drives and restart the computer and check if you receive the error.

  Method 2: Try to start the computer in safe mode with network and check if the issue still persists, see the link below to start in safe mode.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

   

  Method 3: You can try and perform a system restore to a date when things were working well and check.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

  In addition, you can also download the minidump files so the experts here can analyze the cause of the problem.

  How read partial memory dump files that Windows creates for debugging

  http://support.Microsoft.com/kb/315263

   

  Use SkyDrive download collected files and post screen shot/image

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  Let us know the results.

• My touch screen has a problem after downloading the IOS 9.0.2. Already try apple advises the steps. But the problem still occur. Already done restart of strength. Factory setting Reset also possible. But still the same problem. Can only be used at one min

  Hello!!!

  IM Apple Fan.

  Purchased IM Ipad2, Ipad4, Iphone6

  Last month I already buy s Iphone6 +.

  Today I feel unhappy

  MY IPHONE 6 'history '.

  My touch screen has a problem after downloading the IOS 9.0.2.

  Already called and try apple advises the steps. But the problem still occur.

  Already done restart of strength. Factory setting Reset also possible. But still the same problem.

  Only can be used for a minute. After that... The problem comes in again & again & again...

  APPLE.COM

  Can U help me

  Only products of Apple of love before updating the version 9.0.2

  iOS 9.0.2 happened some time. The last iOS is iOS 9.2. If you have not updated, updated. If you restored to the factory, it must have downloaded iOS 9.2. Also, if you restore to the factory and the problem is still there, then you must make an appointment at the Genius Bar to the nearest Apple store or Apple authorized service provider or call the Apple Support to have the device examined by Apple. There seems to be something wrong with the screen.

• User account not found - can only login as a guest

  Hello

  big problem with my MacBook pro 2011 running EL Capitan

  Everything was fine yesterday, but today, I woke up from his sleep and plugged a drive hard usb. the restarted mac of his own accord, and my user account is no rain now, just a guest account. I have run the built in utility disk from the inside of the guest and the account and the start screen of recovery - in both cases, when, through the process, but gave no serious error. I do not see other user accounts in the guest account but I can't create a new user account because it requires admin name / password and my old details are not recognized? Any ideas on what I should do next?

  PS - tried to start in SafeMode (by pressing the SHIFT key when starting), but once again, a few comments. I'm sure that I had no encryption hard drive forward what happened. In addition, it is a double bulkhead bootcamp with windows installed 10.

• OE6, XP works great except that the content of the file is missing on the screen, can only access using the 'next '.

  Can send & receive OK but if I click on any folder, IE, Inbox etc, I just see the first message that is completely open and displayed, not the list of messages for me to select a. It goes the same for files sent/deleted. To see others, the only way is to click on 'View', then select 'next '.

  View | Page layout. Is the preview pane checked or not?

• After downloading lightroom 6 on win10 pc that I have failed to install this product can only be used on 64-bit systems

  After downloading lightroom 6 on win10 pc that I have failed to install, this product can be used only on 64-bit systems. Pls help.

  6 of Lightroom is 64-bit only.

• MP4 files can only be used as audio files Premiere Pro CS6

  Recently, I tried to put a text on top of some video footage.

  However, when I imported the video file (see screenshot) and tried dragging it in my editing, Premiere Pro only recognizes as an audio file.

  This type of file is MPEG MOVIE and I used it without a problem in CS5. I know that this shouldn't be the case.

  
  Can anyone recommend a way to do either Premiere Pro recognizes my file video (in the screenshot), or instead, a file type that pro will recognize such as video and audio.

  Thank you

  Source patch http://forums.adobe.com/thread/1442800?tstart=0 can help

• How can I send something to my iCloud so that my husband can see if using a public computer?

  I need a way to share the video that I take on my iPhone with my husban, located in a place where there are no personal computer or telephone using iCloud app. It is possible on iCloud.com?

  Your husband can access iCloud Drive or iCloud photo library at www.icloud.com, if he signs in this webpage with your AppleID.

  You need to store the video on iCloud drive or, if you have iCloud library activated for your iPhone, the video album of your iCloud photo library is visible in the Photos.app on www.icloud.com.

• Windows Activation error - the product key you have entered can only be used in certain countries or region.

  The product key you entered only can be used in some country or region. Activate windows where you bought it or buy a new product key.

  I bought an Asian copy of the South of windows 7 in Malaysia 3 years ago and it has worked very well, recently I went to Singapore and decided to format my laptop and do very little maintenance, but now its gives me this rubbish, I am still in Southeast Asia, what I really need to go back to Malaysia to install it? seems very very annoying.

  some licenses are geoblocked. You can try activating the phone and speak to a representative of activation and see if they will activate it for you.

  How to activate Windows 7 manually (activate by phone)

  1) click Start and in the search for box type: slui.exe 4

  (2) press the ENTER"" key.

  (3) select your "country" in the list.

  (4) choose the option "activate phone".

  5) stay on the phone (do not meet all the automatic guests) and wait for a person to help you with the activation.

  (6) explain your question clearly to the support person.

• am a new user, I hope someone can help. am using action script 3 with flash cs4

  I'm trying to create a Clip that bounces on both sides of the stage!

  I only Manager to create a Clip that bounces from one side of the stage using the following syntax...

  var ballTween:Tween = new Tween (ball, "x", Bounce.easeOut, 520, 5, true);

  peuvent some please help!

  Thank you very much for your help!