ISE comments Portal

Similar Questions

• ISE comments Portal failover for new applications

  I have a controller and resilience, not ability on both nodes of the ISE 1.2 (primary and secondary).  Each node of ISE has a management interface and an interface for the portal.  PSN is active on both nodes.  The WLC chooses the ISE node (with relief) for authentication.  Guest authentication, the user should be redirected to one of the two comments. What is the best method to choose and correctly redirect the user comments portal (including when it is down).  Is there a single other solution than a LoadBalancer for this scenario. Node groups are waiting for sessions and I need a solution for new sessions.

  Thank you.

  You don't need to do, once the WLC held a PSN down, new mab requests are sent to the next psn in your list of RADIUS on the wlc and other psn will respond with its own host name in the url redirect.

• Cisco ISE comments Portal - DNS problem - External area

  Hello

  I have a client that has the following sceanrio:

  In a wireless deployment and deployment Cisco ISE 1.1.3 with CWA, when the wireless client receives the URL ISE redictect (URL to access the portal of ISE comments), this URL is based on the ISE DNS name, not on its IP address. Thus, the PC cannot solve this problem by DNS name because there is no DNS in the external area (for the guets) or by using the addresses of servers DNS ISP provided by the DHCP server, and therefore it cannot access the portal comments at all;

  I know that in an attempt to manually code the IP address - it doesn't (IE in the authorization profile CWA, the equivalent URL redirection via the pair av CISCO as follows:)

  Cisco-AV-Paire = redirect url =https://10.10.10.10:8443/guestportal/gateway? sessionId = sessionIdValue & action = cwa,)

  given that the sessionIdValue variable is not replaced by its real value when sending to the wireless client)

  My question is: this question has been addressed in version 1.2 of Cisco of ISE - has anyone tried it if has been processed? If not in Cisco 1.2 - does anyone know iof this feature will become available?

  Thanks in advance for your answers.

  Robert C.

  Robert,

  Manual assignment has been made available in version 1.2 of the ISE.

  M.

  

• Cisco ISE comments Sponsor Isssue Portal

  Hi all

  We have insatalled 5 boxes of ise 3315 IOS 1.0.4 in our network where in two of them are admin node, two services strategy and has a node mnt. We using sponsor portal for guest user wirless comments where we integrated WLC 5508 with ise and using weblogin for guest users.

  We have created open ssid wlc and external aid redirected url to ise for the login page of comments.

  But when we create a guest in the sponsor for guest user connection, user that we faced after publication

  (1) when guest user gets connected to WiFi and connect to the portal of comments with credentials after putting the credentials then his new redirect to the same login page

  wihout invites successful connection.

  Can us guest login successful after comments connect to the portal of reviews or redirect any other link as google.com for guest user will be done the knowledge he is able to access the internet now

  (2) we have appointed time profile 8hours first user login guest. When the guest user gets connected while putting in credentials on the portal of comments.

  But we are facing problem after about 20 mins enhanced disconnects Internet and comments again Gets the login page of the portal of the guest and if we put the same credentials, then his work but after about 20 min interval disconnected Internet user.

  Can someone help me resolved on observation about covers them cisco ise comments sponsor Portal

  Thank you & best regards

  Pranav Gade

  Pranav your answers are online,

  (1) when guest user gets connected to WiFi and connect to the portal of comments with credentials after putting the credentials then his new redirect to the same login page

  wihout invites successful connection. When you use CWA (Central web authentication) there is no way we can redirect users by using the redirect url because it will always redirect users for each time they start a web request. There is no other cost functionality that will remove this condition because they have already been authenticated.  Here is a guide that explains the user experience when using web Central auth -

  http://www.Cisco.com/en/us/docs/security/ISE/1.1.1/user_guide/ise_guest_pol.html#wp1296954

  Can us guest login successful after login guest Portal comments or redirect any other link as google.com for guest user will be acquainted with it is able to access the internet now This is not possible, you can change the verbage and force the AUP to be displayed to users informing them that they can start their web request after hitting the button I accept.

  Here's to justify it experience, once users go through the process of reviews-

  http://www.Cisco.com/en/us/products/ps11640/products_configuration_example09186a0080ba6514.shtml#final

  (2) we have appointed time profile 8hours first user login guest. When the guest user gets connected while putting in credentials on the portal of comments.

  But we are facing problem after about 20 mins enhanced disconnects Internet and comments again Gets the login page of the portal of the guest and if we put the same credentials, then his work but after about 20 min interval disconnected Internet user. Check advance timer on your SSID you can be hitting the session on the WLC timeout. Please disable this option and let the functionality of COA ISE at expiration of the user on the controller sessions of.

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• Change the URL redirection in Cisco ISE 2.1.0 comments Portal CWA

  Hello

  I've set up a guest Portal CWA with WLC 5508 8.0.133.0 and ISE 2.1.0.

  I did all the rules both Authenticatin and authorization, and I also see customers hit the rules of law. The rule of being redirects the client to a captive portal in ISE like this: cisco-av-pair = redirect url =https://ip:port/Portal/Gateway? sessionId = SessionIdValue & Portal = d30c7eb0...

  I have 3 different customer portals for each SSID and everything works fine.

  The problem is that, when the wireless client receives the URL ISE redictect (URL to access the portal of ISE comments), this URL is based on ISE DNS name, not on its IP address. My ISE FULL domain name is iselab01.example.local and the certificate indicating that the portal comments field is example.local.

  Now I was asked to create a new portal of comments but this time I have the certificate belongs to the domain example.org and need to redirect to this new portal comments use this new domain.

  I tried to code, in the authorization profile CWA, redirection to equivalent URL through the CISCO av pair as follows:

  Cisco-av-pair = redirect url =https://iselab01.example.org:8443/Portal/Gateway? sessionId = SessionIdValu...

  but it does not work, since the sessionIdValue is not replaced with its actual value when sending to the wireless client.

  Is it possible to change the URL for redirection of ISE somewhere just for a portal of comments?

  Best regards

  Simply use the automatic CWA parameter in the authz profile, rather than enter the cisco-av-pair yourself, you will find that you can change the part of the FQDN of the url, if the session ID is kept intact.

• ISE comments 1.4 Portal certificate

  In an effort to improve the guest user to experience, we recently bought a public SSL certificate standard.  We generated the CSR of ISE and on condition that the seller to have it signed.  We then imported/bind in ISE for portals.  The goal was to reduce the certificate guests and certificate warnings.  However, after an initial test we are still getting these.  Missing something?  Is there a way to eliminate the pulse? Thank you.

  Yes if you have a complete chain installed, recharge the PSN and the test again. Alternatively, you can import the certificate .cer.

  ~ Jousset

• Comments ISE FQDN Portal

  It is possible to create the portal comments FQDN?

  I'll try to explain.

  Requirements:

  Network WiFi 1) must be secured with L2-security(WPA2-Enterprise,PEAP) - redirect Web or not L3.

  WiFi 2 users) should use separate external Authority(AD or LDAP, not enterprise and not ISE local)

  (3) it is not necessary for managing personal devices.

  WiFi 4 users) must have the ability to change their password of the intranet portal, which is available with the FULL domain name.

  There is no problem with req 1-3, it doesn't seem like chance to create the portal only for change of user password. These requirements related to the question "mobile devices do not allow option to change password" If ISE send request to change (tested on iPhone, Android and WindowsMobile with Active Directory).

  Hi Sefedoro,

  The 1.3 ISE does support use of domain name COMPLETE with portals of comments. This can be defined in the authorization profile that specifies the CWA portal. However this FQDN of the portal comments accessible only by customers with active sessions in the comments workflow process. Also, change password via the portal of comments is supported for ISE internal comments and not AD accounts. Once network connectivity is established by a windows through WPA2-Enterprise client, a user can change his or her password via ctrl-alt - del-> change password option. If you use user or user authentication or computer begging I would test this process on a couple different windows builds.   BONE and the supplicant should automatically pick the password change. If you use an intermediate intranet portal, the user must connect to the wide and turn it on again for the laptop with the new credentials. You use the authentication of the computer (computer only) will avoid these problems.

• The ISE comments and update of Broswer Security Portal

  Hi, last week our assistance service received a constant steam of calls regarding our wireless of comments.  For most people, the problem is that there are browser will not allow them on the portal.  After a bit of investigation, we have established that what happens on devices with the latest browsers - IE11, Firefox 39 + and Chrome.

  OS x and iOS devices and those devices with older browsers are working ok.

  We run ISE 1.1.3.124 which is a certain number of revisions behind so I assume it is the question that 'ignore' safety standards in these new browsers.

  My plan is to upgrade to version 1.2, and then to 1.3 which I had planned to do next month anyway, but I just wanted to see if there is a work around on the ISE, which can be implemented so that the upgrade is made a thoughtful and not rushed.

  Thank you.

  This problem is apparent on several Cisco - ISE and at least first Infrastructure products.

  A couple of threads to discuss and provide workarounds:

  Thread 1

  Thread 2

  ISE 1.3 (or 1.4) will fix it. In addition, ISE 1.2.1 Patch 7.

  Here's the official Cisco ISE Bug ID.

• ISE comments 1.3 portals

  Hi all

  Anyone know of a bug in ISE 1.3.0.876 that prevents you from setting fields on the portal as mandatory self?

  It seems also impossible to get rid of the field "reason for visit.

  Concerning

  Roger

  Try these:

  CSCur89449

  CSCus35686

  Please rate useful messages and mark this question as answered if, in fact, does that answer your question.  Otherwise, feel free to post additional questions.

  Charles Moreton

• ISE comments print Notification Portal

  Hello

  with the old comments of NAC server, I was able to 'draw' the impression of notification of comments with HTML elements. With ISE I can only write plain text. Does anyone know how to change things like the size of the font for printed documents?

  Kind regards

  Andreas

  Unfortunately, it is not natively supported with ISE 1.2.  However, the notification of comments will be customizable using HTML in point 1.3 of the ISE.  This version will be released if all goes well during the last week of November.

  Please rate useful messages and mark this question as answered if, in fact, does that answer your question.  Otherwise, feel free to post additional questions.

  Charles Moreton

• ISE comments 1.4 certificate

  Hello

  I have configured ISE 1.4 for the first time and I have a problem with the certificates. I have a signed certificate stored in the system certificates system and I can connect on ISE without certificate messages.

  How can I do for comments and promoter of the users with regard to the certificates. Do I need a separate certificate or will be signed cert CA that I generated the work.

  Thank you

  You can use the same certificate for multiple functions in the ISE. To use the same certificate for portal comments editing the certificate and check the 'portal '. Then you can bind the certificate to a certificate portal group Tag. This group certificate label can be attached to the portal of comments that you create.

  I hope this helps!

  Thank you for evaluating useful messages!

• ISE custom portal language

  Hi all

  is it possible to have a custom portal (file uploadé) switch according to the language of the browser?

  I think that the only way to have multiple languages is to use the default portal.

  Any comments?

  It is not possible to have the ise for you to do, you must create this functionality yourself, perhaps with javascript code that could be done.

• Notification by Email of ISE comments (creating a guest account)

  When a guest user creates an account in ISE, it sends an email from system generated with the name of user and password. It says "Welcome to the portal of comments, your LSE username and password yyy xxx." Is there anywhere in ISE (1.2) to change this text, in particular the name of "portal comments? I thought it was in the patterns of language > configure various elements > name of portal. But I've changed that in the name of the portal, and it is not reflected in the email. Thank you.

  Josh,

  It is actually configured in the Sponsor portal settings.  Go in Administration > Web portal management > settings and double-click Sponsor in the left menu.  Open models of language and choose your language (I chose in English).  Scroll to Set up Email Notification and customize!

  

  Do not forget to save

  Please rate useful messages and mark this question as answered if, in fact, does that answer your question.  Otherwise, feel free to post additional questions.

  Charles Moreton

• Webauth ISE comments error

  With the help of web central authentication 802. 1 x on a 3560 at ISE.  I get on the web portal very well and was able to connect with the guest account and change the password.  Now when I get redirected to the portal each time I login I get "your session has expired.  Please log in again".  The ISE error is see as failed authentication comments square: 86017: Session cache entry missing.

  The newspaper of the ISE

  Other features:

  ConfigVersionId = 56, PortalName = DefaultGuestPortal, CPMSessionID = 0A0A084E0000001B4CCB2B1B

  Sessions of authentication switch see the

  ISE-test #sh authentication sessions int fa0/1
  Interface: FastEthernet0/1
  MAC address: 5c26.0a38.a800
  IP address: 172.31.255.15
  Username: 5C-26-0A-38-A8-00
  Status: Authz success
  Area: DATA
  Security policy: must ensure
  State of security: unsecured
  Oper host mode: multi-domain
  Oper control dir: both
  Authorized by: authentication server
  Group VLAN: n/a
  Redirect to URL ACL: ACL-WEBAUTH-REDIRECT
  Redirect URL: https://oranetise01.naismc.com:8443/guestportal/gateway? sessionId = 0A0A084E0000001B4CCB2B1B & action = cwa
  The session timeout: 3600 s (local), remaining: 1324 s
  Delay action: authenticate again
  Idle timeout: 900s (local), remaining: 418 s
  The common Session ID: 0A0A084E0000001B4CCB2B1B
  ACCT Session ID: 0x000001C8
  Handle: 0xC400001C

  Executable methods list:
  The method state
  MAB Authc success
  dot1x does not work

  ----------------------------------------
  Interface: FastEthernet0/1
  MAC address: 0004.f21c.66a9
  IP address: 10.20.0.177
  Username: 00-04-F2-1C-66-A9
  Status: Authz success
  Field: VOICE
  Security policy: must ensure
  State of security: unsecured
  Oper host mode: multi-domain
  Oper control dir: both
  Authorized by: authentication server
  ACL ACS: xACSACLx-IP-PERMIT_ALL_TRAFFIC-4f57e406
  The session timeout: 3600 s (local), remaining: 1253 s
  Delay action: authenticate again
  Idle timeout: N/A
  The common Session ID: 0A0A084E000000161ED6CBD9
  ACCT Session ID: 0x000000F2
  Handle: 0 x 19000017

  Executable methods list:
  The method state
  MAB Authc success
  dot1x does not work

  The session from the browser to the computer ID seems to match the session ID preceding.  I am at a loss.

  David,

  The session ID is generated by the switch then is sent to ISE in the access-request packet. What version of ISE are you on? You can upgrade to ise 1.1.2 because there some difficulties related to the writings of the session. I'm fighting a simliar issue that you said out there, but on the side of posturing. Hope the upgrade solves this problem for you. If you want to set a new session id, you can go to ISE and issue a certificate of authenticity (the session stop) or just bounce the port.

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• Authorization of ISE comments

  Hi all

  Can someone help me for ISE design approval users comments.

  Requirement:

  1. the various comments authorization need to user through ISE, each guest should have different access according to the requirement. Is this possible? If so, how do we achieve this? Base license is purchased.

  Thank you

  Kamlesh

  Here you go:

  http://www.Cisco.com/c/en/us/support/docs/wireless/5500-Series-Wireless-...

  -Jousset