ISE version 1.0 - cannot get access to the administration for cisco devices

Similar Questions

• I just reinstalled 2014 CC InDesign to get access to the Folio Builder, I can't find panel inlays Folio after reinstalling InDesign CC2014

  I just reinstalled 2014 CC InDesign to get access to the Folio Builder - as he was not on the 2015 CC version. I'm not however of Folio overlays. How can I access the Panel inlays Folio after reinstalling InDesign CC2014?

  Go to help > updates and upgrades.

  Neil

• I use a wireless modem to get on the internet at Virgin Mobile Broadband2Go device. Is it possible for some to get access to my PC, when this device is active?

  I have these multiple .exe running on my registry? security of wireless modem?

  I have 2 questions:

  1. I use a wireless modem to get on the internet at Virgin Mobile Broadband2Go device. Is it possible for some to get access to my PC, when this device is active?

  2. I think that someone is due to ghosting my PC. On my registry, I have 2 of the following: iexplore.exe attributed to administrator. Then I have an explorer.exe attributed to administrator. I have 6 svchost.exe running 2 assigned the Local, 2 assigned to network service and 2 running service attributed to the system. Can anyone provide an answer why I have these multiples, exe running on my registry?

  Thank you very much

  GreenGiant

  Hello
   
  Yes, it is possible to gain access to your computer; but not without your permission. The firewall on the computer prevents any unauthorized entry. Refer to the following articles.
   
  What is a firewall?
  http://Windows.Microsoft.com/en-us/Windows7/what-is-a-firewall
   
  Windows Firewall
  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-Firewall
   
  How will I know if a wireless network is secure?
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-know-if-a-wireless-network-is-secure
   
  When you say "Record" do you mean "Services" in the Windows Task Manager. Its common to have these processes or services to run in the background.

  'iexplore.exe' means 'Internet Explorer'.

  'explorer.exe' means 'Windows Explorer'.

   

  What is svchost.exe?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-Svchost-exe

   

  You can scan your computer with MSE to check the virus or malware if it affects your performance.

   

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   

  Hope this information is useful.

• Cannot get rid of the BIOS password

  Bought an ACER Aspire E1 from an EBAY of ACER store about a year ago. A few weeks ago, I started it and quickly received a BIOS PASSWORD entry. Since that time, the laptop was absolutely worthless. I guess I tried the hardware, software, battery and all I could think of to fix the problem. I tried the MICROSOFT forums. ACER, ASK.COM Forums and forums Forums, forums, forrums and other forums that I could think of to try to resolve the unknown BIOS password. Thanks UEFI.

  I guess short of replacement of the EEPROM on the motherboard (don't think even that would help) which I'd be suspicious to do.

  Cannot get rid of the BIOS password.

  If I contact the ACER Support, they say that it's a hardware problem. I tried (as suggested by ACER support), bringing to STAPLES, BESTBUY, FRYS ELECTRONICS, OFFICE MAX, DATA DOCTORS, and several other 'Repair computer facilities' nothing works.

  IN a WORD, it's a PIECE OF a $400 trash...

  If anyone has any ideas on how to reslove this issue, send me an E-mail, fax, text. or post a reply...

  Thanks for letting me the WIND...

  WMARSH...

  can you post the exact model E1?

  E1 - xxx

• I get an error code whenever I start my computer. I have loaded several packs of registry repair software but cannot get rid of the message. The message bed error loading c:\windows\system32\pofusido.dll the specified module is not found

  I get an error code whenever I start my computer. I have loaded several packs of registry repair software but cannot get rid of the message. The message bed error loading c:\windows\system32\pofusido.dll the specified module is not found

  Hello

  I googled this file pofusido.dll and it could be caused by a virus.

  I would suggest that you disable the restore mode as viruses use it to reinstall set apart them.

  Download and install the free http://www.malwarebytes.org/

  Restart the computer and keep pressing F8 to get into safe mode with network connection.

  Once you have updated Malwarebytes run and see if it can remove the virus.

  So delete all cookies in your internet Explorer.

  Please keep in mind that my answer is based on the information in your message. More the better I can answer, Slan go foill, Paul

• cannot get audio in the timeline to another video

  cannot get audio in the timeline to another video

  

• I subscribed to Pack Adobe and not only there me not allowed to do what I need it to do, he charged me the 9.99 and cannot me access to the subscription describes additional features. Worse, it is - I can't see it in my plans to UNSUBSCRIBE.

  I subscribed to Pack Adobe and not only there me not allowed to do what I need it to do, he charged me the 9.99 and cannot me access to the subscription describes additional features. Worse, it is - I can't see it in my plans on my Adobe account to UNSUBSCRIBE. Help! How can I unsubscribe?

  Hello

  An answer depends on where you bought the subscription for.  Please take a look at your purchase confirmation email.

  (a) Apple App Store

  Contact Apple - Apple Support support

  iTunes - account & billing - Apple Support

  (b) Google Play Store

  Subscriptions on Google Play - game Google Help

  (c) adobe web site

  Cancel your subscription or membership. Acrobat, services Cloud of Document PDF

  If none of the above answers your question, please contact Adobe customer service directly.  Sorry for the inconvenience.

• CANNOT GET RID OF THE ARROW ON THE LINE OF MYT TOOL.  CANNOT CHANGE THE COLOR OF THE STROKE.  Help

  CANNOT GET RID OF THE ARROW ON THE LINE OF MYT TOOL.  CANNOT CHANGE THE COLOR OF THE STROKE.  Help

  

• How to get access to the database

  Hello

  I am trying to find a way to access the data base (not the customer database) business catalyst is there a way to do it?

  Or can I add my own database to BusinessCatalyst.

  I need to get access to the database because we have a contract with a company which provids us with news items every working day

  and they want to connect there system to the database.

  Danny gr.

  Hey Danny,

  The system does not work like that. There is no database that you can access in this sense. If you want to create news on your site yourself build a web application or to use the integrated blog.

• Access to the administration via VPN to 887 after config setup pro

  Hi all

  Ive just made a three 887w for a client in a few branches, and as this is the first time I have deployed these devices, I decided to go with the GUI (downloaded config pro 2.3) to get the configuration made that I had some constraints of time to get them in place (sometimes I go with the graphical interface first and then look back at the CLI to see what as its been) (, then hand it in Notepad to get a better understanding of the new features of the CLI may be gone and allowed).

  One thing I again, that I was going to do face was my first experience of the firewall IOS area type of config...

  At this point, I'm still unclear on the config (where why Im posting here I guess!) - but the main problem I have at the moment is with managing access to devices.

  Particularly with regard to access to the administration of headquarters inside the IP address of the branch routers.

  I should mention that the branch routers are connected to Headquarters by connections IPSec site-to-site VPN and these connections are all very good, all connectivity (PC server, PC, printer, etc.) is very well... I can also send packets (using the inside of the interface as a source) ping from branch routers to servers on the headquarters LAN.

  Set up access to administration using config pro to allow access to the router on the subnet headquarters (on its inside interface), as well as the local subnet and also SSH access to a specific host from the internet - the local subnet and the only host on the internet can access the router very well.

  I'm not sure if the problem is with the ZBF config or if its something really obvious Im missing! -Ive done routers branch several times previously, so with this being the first config ZBF I did, so I came to the conclusion that there must be something in the absence of my understanding.

  Any help greatly appreciated... sanitized config below!

  Thanks in advance

  Paul

  version 15.1
  no service button
  tcp KeepAlive-component snap-in service
  a tcp-KeepAlive-quick service
  horodateurs service debug datetime localtime show-timezone msec
  Log service timestamps datetime localtime show-timezone msec
  encryption password service
  sequence numbers service
  !
  hostname name-model
  !
  boot-start-marker
  boot-end-marker
  !
  logging buffered 51200
  recording console critical
  enable secret 5 xxxxxxxxxxxxxxxxxxxxxxxx
  !
  No aaa new-model
  !
  iomem 10 memory size
  clock timezone PCTime 0
  PCTime of summer time clock day March 30, 2003 01:00 October 26, 2003 02:00
  Service-module wlan-ap 0 autonomous bootimage
  !
  Crypto pki trustpoint TP-self-signed-2874941309
  enrollment selfsigned
  name of the object cn = IOS - Self - signed - certificate - 2874941309
  revocation checking no
  rsakeypair TP-self-signed-2874941309
  !
  !
  TP-self-signed-2874941309 crypto pki certificate chain
  certificate self-signed 01
  

  no ip source route
  !
  !
  DHCP excluded-address IP 10.0.0.1 10.0.0.63
  DHCP excluded-address IP 10.0.0.193 10.0.0.254
  !
  DHCP IP CCP-pool
  import all
  Network 10.0.0.0 255.255.255.0
  default router 10.0.0.1
  xxxxxxxxx.com domain name
  Server DNS 192.168.xx.20 194.74.xx.68
  Rental 2 0
  !
  !
  IP cef
  no ip bootp Server
  IP domain name xxxxxxx.com
  name of the server IP 192.168.XX.20
  name of the server IP 194.74.XX.68
  No ipv6 cef
  !
  !
  Authenticated MultiLink bundle-name Panel

  parameter-card type urlfpolicy websense cpwebpara0
  Server 192.168.xx.25
  source-interface Vlan1
  allow mode on
  parameter-card type urlf-glob cpaddbnwlocparapermit0
  model citrix.xxxxxxxxxxxx.com

  license udi pid xxxxxxxxxxx sn CISCO887MW-GN-E-K9
  !
  !
  username xxxxxxx privilege 15 secret 5 xxxxxxxxxxxxxxxxxxxxx
  username privilege 15 secret 5 xxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxx
  !
  !
  !
  !
  synwait-time of tcp IP 10
  !
  type of class-card inspect correspondence sdm-cls-VPNOutsideToInside-1
  game group-access 106
  type of class-card inspect entire game SDM_SHELL
  match the name of group-access SDM_SHELL
  type of class-card inspect entire game SDM_SSH
  match the name of group-access SDM_SSH
  type of class-card inspect entire game SDM_HTTPS
  match the name of group-access SDM_HTTPS
  type of class-card inspect all match sdm-mgmt-cls-0
  corresponds to the SDM_SHELL class-map
  corresponds to the SDM_SSH class-map
  corresponds to the SDM_HTTPS class-map
  type of class-card inspect entire game SDM_AH
  match the name of group-access SDM_AH
  type of class-card inspect entire game SDM_ESP
  match the name of group-access SDM_ESP
  type of class-card inspect entire game SDM_VPN_TRAFFIC
  match Protocol isakmp
  match Protocol ipsec-msft
  corresponds to the SDM_AH class-map
  corresponds to the SDM_ESP class-map
  type of class-card inspect the correspondence SDM_VPN_PT
  game group-access 105
  corresponds to the SDM_VPN_TRAFFIC class-map
  type of class-card inspect entire game PAC-cls-insp-traffic
  match Protocol cuseeme
  dns protocol game
  ftp protocol game
  h323 Protocol game
  https protocol game
  match icmp Protocol
  match the imap Protocol
  pop3 Protocol game
  netshow Protocol game
  Protocol shell game
  match Protocol realmedia
  match rtsp Protocol
  smtp Protocol game
  sql-net Protocol game
  streamworks Protocol game
  tftp Protocol game
  vdolive Protocol game
  tcp protocol match
  udp Protocol game
  inspect the class-map match PAC-insp-traffic type
  corresponds to the class-map PAC-cls-insp-traffic
  type of class-map urlfilter match - all cpaddbnwlocclasspermit0
  Server-domain urlf-glob cpaddbnwlocparapermit0 match
  type of class-card inspect entire game PAC-cls-icmp-access
  match icmp Protocol
  tcp protocol match
  udp Protocol game
  class-map type urlfilter websense match - all cpwebclass0
  match any response from the server
  type of class-card inspect correspondence ccp-invalid-src
  game group-access 100
  type of class-card inspect correspondence ccp-icmp-access
  corresponds to the class-ccp-cls-icmp-access card
  type of class-card inspect sdm-mgmt-cls-ccp-permit-0 correspondence
  corresponds to the class-map sdm-mgmt-cls-0
  game group-access 103
  type of class-card inspect correspondence ccp-Protocol-http
  http protocol game
  !
  !
  type of policy-card inspect PCB-permits-icmpreply
  class type inspect PCB-icmp-access
  inspect
  class class by default
  Pass
  type of policy-card inspect sdm-pol-VPNOutsideToInside-1
  class type inspect sdm-cls-VPNOutsideToInside-1
  inspect
  class class by default
  drop
  type of policy-card inspect urlfilter cppolicymap-1
  urlfpolicy websense cpwebpara0 type parameter
  class type urlfilter cpaddbnwlocclasspermit0
  allow
  Journal
  class type urlfilter websense cpwebclass0
  Server-specified-action
  Journal
  type of policy-map inspect PCB - inspect
  class type inspect PCB-invalid-src
  Drop newspaper
  class type inspect PCB-Protocol-http
  inspect
  service-policy urlfilter cppolicymap-1
  class type inspect PCB-insp-traffic
  inspect
  class class by default
  drop
  type of policy-card inspect PCB-enabled
  class type inspect SDM_VPN_PT
  Pass
  class type inspect sdm-mgmt-cls-ccp-permit-0
  inspect
  class class by default
  drop
  !
  security of the area outside the area
  safety zone-to-zone
  zone-pair security PAC-zp-self-out source destination outside zone auto
  type of service-strategy inspect PCB-permits-icmpreply
  zone-pair security PAC-zp-in-out source in the area of destination outside the area
  type of service-strategy inspect PCB - inspect
  source of PAC-zp-out-auto security area outside zone destination auto pair
  type of service-strategy inspect PCB-enabled
  sdm-zp-VPNOutsideToInside-1 zone-pair security source outside the area of destination in the area
  type of service-strategy inspect sdm-pol-VPNOutsideToInside-1
  !
  !
  crypto ISAKMP policy 1
  BA 3des
  preshared authentication
  Group 2
  ISAKMP crypto key address 194.105.xxx.xxx xxxxxxxxxxxx
  !
  !
  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
  !
  map SDM_CMAP_1 1 ipsec-isakmp crypto
  Description Tunnel to194.105.xxx.xxx
  the value of 194.105.xxx.xxx peer
  game of transformation-ESP-3DES-SHA
  match address VPN - ACL
  !
  !
  !
  !
  !
  interface BRI0
  no ip address
  no ip redirection
  no ip unreachable
  no ip proxy-arp
  penetration of the IP stream
  encapsulation hdlc
  Shutdown
  Multidrop ISDN endpoint
  !
  ATM0 interface
  no ip address
  no ip redirection
  no ip unreachable
  no ip proxy-arp
  penetration of the IP stream
  No atm ilmi-keepalive
  !
  point-to-point interface ATM0.1
  Description $ES_WAN$
  no ip redirection
  no ip unreachable
  no ip proxy-arp
  penetration of the IP stream
  PVC 0/38
  aal5mux encapsulation ppp Dialer
  Dialer pool-member 1
  !
  !
  interface FastEthernet0
  !
  interface FastEthernet1
  !
  interface FastEthernet2
  !
  interface FastEthernet3
  !
  wlan-ap0 interface
  description of the Service interface module to manage the embedded AP
  IP unnumbered Vlan1
  no ip redirection
  no ip unreachable
  no ip proxy-arp
  penetration of the IP stream
  ARP timeout 0
  !
  interface GigabitEthernet0 Wlan
  Description interface connecting to the AP the switch embedded internal
  !
  interface Vlan1
  Description $ETH - SW - LAUNCH, INTF-INFO-HWIC $$ $4ESW $FW_INSIDE$
  the IP 10.0.0.1 255.255.255.0
  IP access-group 104 to
  no ip redirection
  no ip unreachable
  no ip proxy-arp
  penetration of the IP stream
  IP nat inside
  IP virtual-reassembly
  Security members in the box area
  IP tcp adjust-mss 1452
  !
  interface Dialer0
  Description $FW_OUTSIDE$
  IP address 81.142.xxx.xxx 255.255.xxx.xxx
  IP access-group 101 in
  no ip redirection
  no ip unreachable
  no ip proxy-arp
  penetration of the IP stream
  NAT outside IP
  IP virtual-reassembly
  outside the area of security of Member's area
  encapsulation ppp
  Dialer pool 1
  Dialer-Group 1
  Authentication callin PPP chap Protocol
  PPP chap hostname xxxxxxxxxxxxxxxx
  PPP chap password 7 xxxxxxxxxxxxxxxxx
  No cdp enable
  map SDM_CMAP_1 crypto
  !
  IP forward-Protocol ND
  IP http server
  23 class IP http access
  local IP http authentication
  IP http secure server
  IP http timeout policy slowed down 60 life 86400 request 10000
  !
  !
  IP nat inside source overload map route SDM_RMAP_1 interface Dialer0
  IP route 0.0.0.0 0.0.0.0 Dialer0
  !
  SDM_AH extended IP access list
  Note the category CCP_ACL = 1
  allow a whole ahp
  SDM_ESP extended IP access list
  Note the category CCP_ACL = 1
  allow an esp
  SDM_HTTP extended IP access list
  Note the category CCP_ACL = 0
  permit tcp any any eq www
  SDM_HTTPS extended IP access list
  Note the category CCP_ACL = 0
  permit any any eq 443 tcp
  SDM_SHELL extended IP access list
  Note the category CCP_ACL = 0
  permit tcp any any eq cmd
  SDM_SNMP extended IP access list
  Note the category CCP_ACL = 0
  allow udp any any eq snmp
  SDM_SSH extended IP access list
  Note the category CCP_ACL = 0
  permit tcp any any eq 22
  SDM_TELNET extended IP access list
  Note the category CCP_ACL = 0
  permit tcp any any eq telnet
  scope of access to IP-VPN-ACL list
  Note ACLs to identify a valuable traffic to bring up the VPN tunnel
  Note the category CCP_ACL = 4
  Licensing ip 10.0.0.0 0.0.0.255 192.168.xx.0 0.0.0.255
  Licensing ip 10.0.0.0 0.0.0.255 10.128.xx.0 0.0.255.255
  Licensing ip 10.0.0.0 0.0.0.255 160.69.xx.0 0.0.255.255
  !
  recording of debug trap
  Note category of access list 1 = 2 CCP_ACL
  access-list 1 permit 10.0.0.0 0.0.0.255
  access-list 23 allow 193.195.xxx.xxx
  Note access-list 23 category CCP_ACL = 17
  access-list 23 permit 192.168.xx.0 0.0.0.255
  access-list 23 allow 10.0.0.0 0.0.0.255
  Access-list 100 category CCP_ACL = 128 note
  access-list 100 permit ip 255.255.255.255 host everything
  access-list 100 permit ip 127.0.0.0 0.255.255.255 everything
  access-list 100 permit ip 81.142.xxx.xxx 0.0.0.7 everything
  Access-list 101 remark self-generated by SDM management access feature
  Note access-list 101 category CCP_ACL = 1
  access-list 101 permit tcp host 193.195.xxx.xxx host 81.142.xxx.xxx eq 22
  access-list 101 permit tcp host 193.195.xxx.xxx host 81.142.xxx.xxx eq 443
  access-list 101 permit tcp host 193.195.xxx.xxx host 81.142.xxx.xxx eq cmd
  access-list 101 tcp refuse any host 81.142.xxx.xxx eq telnet
  access-list 101 tcp refuse any host 81.142.xxx.xxx eq 22
  access-list 101 tcp refuse any host 81.142.xxx.xxx eq www
  access-list 101 tcp refuse any host 81.142.xxx.xxx eq 443
  access-list 101 tcp refuse any host 81.142.xxx.xxx eq cmd
  access-list 101 deny udp any host 81.142.xxx.xxx eq snmp
  access-list 101 permit ip 160.69.0.0 0.0.255.255 10.0.0.0 0.0.0.255
  access-list 101 permit ip 10.128.0.0 0.0.255.255 10.0.0.0 0.0.0.255
  access-list 101 permit ip 192.168.xx.0 0.0.0.255 10.0.0.0 0.0.0.255
  access-list 101 permit udp host 194.105.xxx.xxx host 81.142.xxx.xxx eq non500-isakmp
  access-list 101 permit udp host 194.105.xxx.xxx host 81.142.xxx.xxx eq isakmp
  access-list 101 permit host 194.105.xxx.xxx host 81.142.xxx.xxx esp
  access-list 101 permit ahp host 194.105.xxx.xxx host 81.142.xxx.xxx
  access list 101 ip allow a whole
  Note access-list 102 CCP_ACL category = 1
  access-list 102 permit ip 192.168.xx.0 0.0.0.255 everything
  access-list 102 permit ip host 193.195.xxx.xxx all
  access-list 102 permit ip 10.0.0.0 0.0.0.255 any
  Note access-list 103 self-generated by SDM management access feature
  Note access-list 103 CCP_ACL category = 1
  access-list 103 allow ip host 193.195.xxx.xxx host 81.142.xxx.xxx
  Note access-list 104 self-generated by SDM management access feature
  Note access-list 104 CCP_ACL category = 1
  access-list 104 permit tcp 192.168.xx.0 0.0.0.255 host 10.0.0.1 eq telnet
  access-list 104 permit tcp 10.0.0.0 0.0.0.255 host 10.0.0.1 eq telnet
  access-list 104 permit tcp 192.168.xx.0 0.0.0.255 eq on host 10.0.0.1 22
  access-list 104 permit tcp 10.0.0.0 0.0.0.255 host 10.0.0.1 eq 22
  access-list 104 permit tcp 192.168.xx.0 0.0.0.255 host 10.0.0.1 eq www
  access-list 104 permit tcp 10.0.0.0 0.0.0.255 eq to host 10.0.0.1 www
  access-list 104 permit tcp 192.168.xx.0 0.0.0.255 host 10.0.0.1 eq 443
  access-list 104 permit tcp 10.0.0.0 0.0.0.255 host 10.0.0.1 eq 443
  access-list 104 permit tcp 192.168.xx.0 0.0.0.255 host 10.0.0.1 eq cmd
  access-list 104 permit tcp 10.0.0.0 0.0.0.255 host 10.0.0.1 eq cmd
  access-list 104 tcp refuse any host 10.0.0.1 eq telnet
  access-list 104 tcp refuse any host 10.0.0.1 eq 22
  access-list 104 tcp refuse any host 10.0.0.1 eq www
  access-list 104 tcp refuse any host 10.0.0.1 eq 443
  access-list 104 tcp refuse any host 10.0.0.1 eq cmd
  access-list 104 deny udp any host 10.0.0.1 eq snmp
  104 ip access list allow a whole
  Note access-list 105 CCP_ACL category = 128
  access-list 105 permit ip host 194.105.xxx.xxx all
  Note access-list 106 CCP_ACL category = 0
  access-list 106 allow ip 192.168.xx.0 0.0.0.255 10.0.0.0 0.0.0.255
  access-list 106 allow ip 10.128.0.0 0.0.255.255 10.0.0.0 0.0.0.255
  access-list 106 allow ip 160.69.0.0 0.0.255.255 10.0.0.0 0.0.0.255
  Note category from the list of access-107 = 2 CCP_ACL
  access-list 107 deny ip 10.0.0.0 0.0.0.255 160.69.0.0 0.0.255.255
  access-list 107 deny ip 10.0.0.0 0.0.0.255 10.128.0.0 0.0.255.255
  access-list 107 deny ip 10.0.0.0 0.0.0.255 192.168.xx.0 0.0.0.255
  access-list 107 allow ip 10.0.0.0 0.0.0.255 any
  Dialer-list 1 ip protocol allow
  not run cdp

  !
  !
  !
  !
  allowed SDM_RMAP_1 1 route map
  corresponds to the IP 107
  !
  !
  control plan
  !
  !
  Line con 0
  local connection
  no activation of the modem
  line to 0
  line 2
  no activation-character
  No exec
  preferred no transport
  transport of entry all
  line vty 0 4
  access-class 102 in
  privilege level 15
  local connection
  transport input telnet ssh
  !
  Scheduler allocate 4000 1000
  Scheduler interval 500
  NTP-Calendar Update
  130.159.196.118 source Dialer0 preferred NTP server
  end

  Hi Paul,.

  Here is the relevant configuration:

  type of policy-card inspect PCB-enabled

  class type inspect sdm-mgmt-cls-ccp-permit-0
  inspect

  
  

  type of class-card inspect sdm-mgmt-cls-ccp-permit-0 correspondence
  corresponds to the class-map sdm-mgmt-cls-0
  game group-access 103

  
  

  type of class-card inspect all match sdm-mgmt-cls-0
  corresponds to the SDM_SHELL class-map
  corresponds to the SDM_SSH class-map
  corresponds to the SDM_HTTPS class-map

  
  

  type of class-card inspect entire game SDM_SHELL
  match the name of group-access SDM_SHELL
  type of class-card inspect entire game SDM_SSH
  match the name of group-access SDM_SSH
  type of class-card inspect entire game SDM_HTTPS
  match the name of group-access SDM_HTTPS

  
  

  SDM_SHELL extended IP access list
  Note the category CCP_ACL = 0
  permit tcp any any eq cmd
  SDM_SSH extended IP access list
  Note the category CCP_ACL = 0
  permit tcp any any eq 22
  SDM_HTTPS extended IP access list
  Note the category CCP_ACL = 0
  permit any any eq 443 tcp

  
  

  Note access-list 103 self-generated by SDM management access feature
  Note access-list 103 CCP_ACL category = 1
  access-list 103 allow ip host 193.195.xxx.xxx host 81.142.xxx.xxx

  The above configuration will allow you to access the router on the 81.142.xxx.xxx the IP address of the host 193.195.xxx.xxx using HTTPS/SSH/SHELL. To allow network 192.168.16.0/24 access to the router's IP 10.0.0.1, add another entry to the access list 103 as below:

  access-list 103 allow ip 192.168.16.0 0.0.0.255 host 10.0.0.1

  This should take enable access to this IP address for hosts using ssh and https. Try this out and let me know how it goes.

  Thank you and best regards,

  Assia

• My Wi - Fi Protected Setup Wizard connection dialog box in the Intel PROSet /Wireless connection utility won't let me get caught in the password for my BigPond router.

  Dialog box of connection Wi - Fi Protected Setup Wizard in the Intel PROSet /Wireless connection utility

  My Wi - Fi Protected Setup Wizard connection dialog box in the Intel PROSet /Wireless connection utility won't let me get caught in the password for my BigPond router. He let me just plug in numbers not letters. Can someone tell me how to work around this problem?

  Hello

  This can happen if the configuration of the router is configured to accept the password in numbers. You can get in touch with Bigpond support for more information on this.

  Technical assistance to BigPond

• How can I prevent standard users access records personnel administrator for example. photos and documents

  How can I prevent standard users access records personnel administrator for example. photos and documents

  Hello bh51,

  Did you run your antivirus as well as any spyware removal?  As davidhk requested, then you are able to turn sharing off the coast, but it just doesn't work?   I suggest creating a new folder and move the data, and then see if other users are still able to view these.

  Please let us know status.

• In Windows 7 RC, try to get a local domain, error ' you don't have permission to save in this location. Contact the administrator for approval. »

  I installed Windows 7 RC today and trying the route of a local domain in C:/Windows/System32/drivers/etc/hosts, but get an error when you try to save it with Notepad:

  "You don't have permission to save in this location. Contact the administrator for approval. »

  If I try to save it to my documents and then copy the file over I have another error:

  "You need give the administrator permission to copy to this folder."

  My account is the only account is already an administrator.

  How can I do this?

  See you soon.

  Right click on Notepad, and choose Run as administrator. Click on file, then open, then navigate to

  \Windows\system32\drivers\etc

  In the menu drop-down edit files text (*.txt) to all files (*. *)

  Open the hosts file and change now :-)

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/thread/9446377a-42ab-4079-AFEC-e90a097060c0/

• SSL certificate for access to the administration of a WSA

  Can someone point me to a guide on how to install an ssl certificate for access to the administration of a WSA?

  Curiously, all the documents that I could find so far talk of SSL certificate for HTTPS decryption...

  Page 367 of this doc.  http://www.Cisco.com/c/dam/en/us/TD/docs/security/WSA/wsa8-0/wsa8-0-6/WSA_8-0-6_User_Guide.PDF

• Impossible to install the mouse, the drivers for this device are not installed. (Code 28) Access is denied. To find a driver for this device, click Update driver.

  Hello

  I recently bought a windows mouse (Microsoft wireless mobile mouse 1000). When the connection of the transceiver nano in my computer it is unable to install the driver.

  I tried many fixes but none work, I downloaded the driver from the website driver Microsoft but the mouse still does not work.

  When you install the driver he always says "the drivers for this device are not installed. (Code 28) Access is denied. To find a driver for this device, click Update driver. »

  Why would access denied?

  Any help would be great.

  I am running Windows 7 Home Premium

  See you soon

  Robert

  Hi Robert,.

  You receive this error during the installation of other USB devices?

  Usually this kind of error messages happen when we are not connected as an administrator.

  You can read the following article and check if that helps.

  Code 28: The drivers for this device are not installed

  Please return to the State of the question.