Access to the administration via VPN to 887 after config setup pro

Similar Questions

• Political dynamic VPN access and access to the administration

  Hi all

  I'm testing a scenerio with an ASA 5520 so he could authenticate VPN users against and an environment Active Directory more access to management as well. I created a dynamic access on the ASA policy indicating that, if you are a member of the Active Directory 'Managment' group continue. I have chagned the DefaultAccessPolicy to "Finish." With it, users could not connect VPN because they are not a member of this group, but access to manage the ASA is allowed due to this policy.

  Is there a way through the use of dynamic access policies I can afford access to the administration (SSH, AMPS, etc.) by matching to membership in a group and will allow normal users to VPN in successfully, but not give them access to the management of the ASA?

  I just try this but it seems that I should be able to swing that?

  Thaks in advance.

  Hello

  You can try to apply the DAP and configure the filter ACL network. allowing only the protocols you want to that they can access.

  Kind regards

  Anisha

  P.S.: Please mark this thread as answered if you feel that your query is resolved. Note the useful messages.

• Firefox opens, but this morning, I can't access all the links via Firefox. I can through Explorer. I prefer Firefox. Help!

  Firefox opens, but this morning, I can't access all the links via Firefox. I can through Explorer.

  One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.com/kb/server+not+found
  • https://support.Mozilla.com/kb/firewalls

• SSL certificate for access to the administration of a WSA

  Can someone point me to a guide on how to install an ssl certificate for access to the administration of a WSA?

  Curiously, all the documents that I could find so far talk of SSL certificate for HTTPS decryption...

  Page 367 of this doc.  http://www.Cisco.com/c/dam/en/us/TD/docs/security/WSA/wsa8-0/wsa8-0-6/WSA_8-0-6_User_Guide.PDF

• Unable to connect to the administration via the regional service console server after 11.1.2.2 installation

  Hi gurus,

  I have installed and configured the services foundation, eas and essbase in windows 2003 server, afteEA r configuration I have observed that there are no tables for eas schema then I found that it was a bug and applied patch and set up again it has been successfully configured.

  When I tried to connect to the administration via the regional service console server. He States unable to connect to the administration server. everything else works.

  I see only 4 services in services.msc

  Oracle hyperion configuration manager

  EMP web server application

  opmn services

  OSH services

  all services are started with the exception of oracle hyperion configuration manager. I tried to start, but it does not start... is - this service has an impact on the administration server.

  I checked the logs, I can't find anything in easserver.log.

  any suggestions?

  Kind regards

  Kumar

  Looks like you have deployed web applications to a single managed server that is running on a port by default of 9000, then try to add the server to the Regional service as servername:9000

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Access to the internet via 'comments' or another user account

  When I try to access the internet via the "guest" account, I get the message... "Internet explorer has stopped working"... and I can't accest internet from any other account on this computer, except the administrative account or 'guest'.  What gives?

  You mean any other admin account or standard account?
  This isn't a good idea to use the guest user account check this: http://technet.microsoft.com/en-us/library/bb418978.aspx
  Create a new standard user account to check.

• Access secure site HTTP is preventing access to the administrator and security pages.

  I'm trying to access the administrator and security settings, but when I select the option I get a message that I am connected to a secure site, and when I click OK there is a warning that tells me that I can meet with a message indicating that the certificate is not approved to continue anyway; I keep being stopped by the message: error system internal system error accompanied by what seems to be a status bar that does nothing and I can't continue after that screen. Any help would be greatly appreciated. Thank you in advance.

  Ben

  I was not able to change my URL to get changes to compatibility mode, but I found a free application of IE button on Google Chrome app site that allowed me to make the changes to the printer settings.

  Thanks for your suggestion!

  Ben

• Unauthorized access to the administrator account

  Original title: my stepson accessed my account

  My wife and I are defined as administrators for our computer. We have children accounts set up as limited. Last night, my old stepson of 16 said he knew our password and it did. I don't want him on our behalf! How is this possilble and how can I stop this happenning again?

  Hello

  You can change the password for the account and ensure that it cannot access the administrator account. Change password for the user account

  1. click on Start orb

  2. go in Control Panel

  3. Select the category of user account and parental control

  4. click on user account

  5. click on change password

  6. follow the on-screen instructions

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Access to the administrative share to XP from Vista

  Really Microsoft?

  The installer: A machine XP Pro (SP3) and the other Windows Vista Home premium 64-bit (SP1).

  Problem: Vista, I can not access the administrative share (C$) located on the Windows XP computer.

  Frustrating part: I AM able to access shares administrative, located on the Vista machine, the Windows XP machine

  Notes: Has) I turned off all firewalls and antivirus/anti-malware programs on both machines to help determine the root cause of the problems. B) when you try to connect to the administrative share on the XP machine I have do I get prompted for a user name and password. I tried to connect, with the help of two standard (username) and the fully qualified name (machine_name\username AND workgroup_name\username), without success.

  Try resetting the share of home networking on the XP machine following its procedures to the letter).  It seems that it requires that the machine XP access rights when a properly conifigured hand should access the share without requireing authentication.  Something is not set correctly, and again can help solve the problem.

  If this isn't the case, after return and we will try something else.  Vista and XP often have trouble talking to each other - this isn't the first post I've seen on this issue.  The two, they have the same name of working group and they have the same included user names - if not add the correct user name and make the same working group.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Issues of access to the administrator account of

  I have a laptop that has 3 users.  I'm the administrator of this laptop and I recently tried to log in under my user name, but I am unable to do it because the computer does not recognize my password.  I made no change my password.  Accordingly, any changes that I want to do, to access my files, etc, are not possible.  I can still use my laptop, but only by a guest account.  What happened and how do I access my user/account name?

  MS Answers does not allow anyone help users to bypass the password protection... Regardless of the reasons.

  Here is the link to the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/a5839e41-b80e-48c9-9d46-414bc8a8d9d4

  The only suugestion that I am authorized to offer is to reinstall Vista.

• denying access to the administrator

  Trying to install my printer. It is compatible with vista. tell me, he needs administrator access denied. I am the administrator. How to spend it

  Right click > run as admin.

  See you soon. Mick Murphy - Microsoft partner

• Cannot access the internet using the account invited in Vista. Unable to access using the administrator account.

  This one is strange - and I repeat that the problem is that I can't access the internet by using the administrator account.  The guest account works fine.  All programs are there and launch the fine (IE, Live Messenger, Yahoo Messenger, etc.), but they cling right there when I try to log on or access to any Web site.

  While in the administrator account, I ran "CMD" in the run menu and can ping Yahoo, Google, etc. with success.  It's embarrassing - any ideas how the administrator account can act that way then the guest account works perfectly?

  Hello Allen LaBrune,.

  If you are able to ping the websites from the command prompt, it means that your computer connectivity is fine.

  ·         What is the antivirus installed on your computer protection software?

  ·         Have you tried to browse by disabling the firewall?

  Try disabling the firewall on the computer and check if you are able to navigate.

  If this does not work, reset Internet Explorer settings and check if you can browse.

  To use the feature reset the settings of Internet Explorer in the Control Panel, follow these steps:

  1. exit all programs, including Internet Explorer (if it is running). 2. If you are using Windows Vista, click Start, type the following command in the start search box and press ENTER: Inetcpl.cpl The Internet Options dialog box appears. 3. click on the Advanced tab. 4. Under Reset Internet Explorer settings, click Reset. Then click again on reset. 5. when Internet Explorer has finished resetting the settings, click close in the reset Internet Explorer settings dialog. 6. restart Internet Explorer. For you reference, you can visit the link for the following Article: http://support.Microsoft.com/kb/923737

  Thank you

  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot change the settings on the computer. No access to the administrator account

  Original title: I can't access permissions to change settings or programs.

  I can not access permissions to change any settings or programs and do not have access to an administrator account, I tried what allows one but you must have admin permission to do so. Please point me in the right direction, it seems that Ive tried everything. ID realyy don't want to spend money on software

  Hi Christophe,

  -With which user account you have connected? It is a standard user account?

  -What happens when you try to change the settings? You receive an error? In the affirmative, please let us know the exact error message.

  Since you are not able to create an administrator account, I suggest you to enable the built-in Administrator account.

  1. you must start the computer by using the Windows 7 installation media.

  Follow the steps in http://windows.microsoft.com/en-us/windows/what-are-system-recovery-options#what-are-system-recovery-options=windows-7 to enter the recovery options in Windows 7.

  Note: See the manual of the computer to change the Boot order in the BIOS and set the CD/DVD as first boot device.

  2. Once you start the computer by using the Windows 7 installation disc, follow the instructions on the screen then go food Advanced Options and select command prompt.

  In the command prompt, type net user administrator / Active: Yes

  After the command finishes, restart the computer and then log on to the administrator account by default, change the account type of the old user account and make as administrator and check if you are able to change the settings.

  Follow the steps in the http://windows.microsoft.com/en-in/windows7/change-a-users-account-type to change the account type of the user account.

  Once you have set the administrator type account with your user account, disable the default user account by following these steps.

  1. login to your user account.

  2. open the command prompt, type cmd. exe in the run search and right click on cmd.exe and select Run as Administrator.

  3. type net user administrator / active: No.

  This will disable the built-in Administrator account.

  Hope this information is useful.

• Access to the remote site VPN

  Hello

  I'm trying to solve a problem with the VPN, and I hope that someone could give me a helping hand.

  We have 3 offices, each with an ASA 5505 like the router/firewall, connected to a cable modem

  (NC Office) <----IPSEC----->(office of PA) <----IPSEC----->(TC Office)

  Internally, we have a full mesh VPN, so all offices can talk to each other directly.

  I have people at home, by using remote access VPN into the Office of PA, and I need them to be able to connect to two other offices there.

  I was able to run for the Office of CT, but I can't seem to work for the Office of the NC.  (I want to say is, users can remote access VPN in the PA Office and access resources in the offices of the PA and CT, but they can't get the Office of NC).

  Someone could take a look at these 2 configs and let me know if I'm missing something?  I am newer to this, so some of these configs do not have better naming conventions, but I'm getting there

  PA OFFICE

  Output of the command: "show run".

  : Saved
  :
  ASA Version 8.2 (5)
  !
  hostname WayneASA

  names of
  !
  interface Ethernet0/0
  switchport access vlan 2
  !
  interface Ethernet0/1
  !
  interface Ethernet0/2
  !
  interface Ethernet0/3
  !
  interface Ethernet0/4
  !
  interface Ethernet0/5
  !
  interface Ethernet0/6
  !
  interface Ethernet0/7
  !
  interface Vlan1
  nameif inside
  security-level 100
  IP 192.168.1.1 255.255.255.0
  !
  interface Vlan2
  nameif outside
  security-level 0
  IP 70.91.18.205 255.255.255.252
  !
  passive FTP mode
  clock timezone IS - 5
  clock to summer time EDT recurring
  DNS lookup field inside
  DNS domain-lookup outside
  DNS server-group DefaultDNS
  75.75.75.75 server name
  75.75.76.76 server name
  domain 3gtms.com
  permit same-security-traffic intra-interface
  object-group Protocol TCPUDP
  object-protocol udp
  object-tcp protocol
  inside_access_in of access allowed any ip an extended list
  IPSec_Access to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.2.0 255.255.255.0
  IPSec_Access to access extended list ip 192.168.10.0 allow 255.255.255.224 192.168.2.0 255.255.255.0
  IPSec_Access to access extended list ip 192.168.10.0 allow 255.255.255.224 192.168.5.0 255.255.255.0
  inside_nat0 to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.10.0 255.255.255.224
  inside_nat0 to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.2.0 255.255.255.0
  inside_nat0 to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.5.0 255.255.255.0
  TunnelSplit1 list standard access allowed 192.168.10.0 255.255.255.224
  TunnelSplit1 list standard access allowed 192.168.1.0 255.255.255.0
  outside_1_cryptomap to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.2.0 255.255.255.0
  outside_2_cryptomap to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.5.0 255.255.255.0
  outside_cryptomap to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.5.0 255.255.255.0
  RemoteTunnel_splitTunnelAcl list standard access allowed 192.168.1.0 255.255.255.0
  RemoteTunnel_splitTunnelAcl_1 list standard access allowed 192.168.1.0 255.255.255.0
  RemoteTunnel_splitTunnelAcl_1 list standard access allowed 192.168.2.0 255.255.255.0
  RemoteTunnel_splitTunnelAcl_1 list standard access allowed 192.168.5.0 255.255.255.0
  out_access_in list extended access udp allowed any SIP host 70.91.18.205 EQ
  out_access_in list extended access permit tcp any host 70.91.18.205 eq 5000
  out_access_in list extended access permits any udp host 70.91.18.205 range 9000-9049
  out_access_in list extended access permit tcp any host 70.91.18.205 EQ SIP
  out_access_in list extended access allowed object-group TCPUDP any host 70.91.18.205 eq 5090
  out_access_in list extended access permit udp any host 70.91.18.205 eq 5000
  Note to outside-nat0 access-list NAT0 for VPNPool to Remote Sites
  outside-nat0 extended ip 192.168.10.0 access list allow 255.255.255.224 192.168.2.0 255.255.255.0
  outside-nat0 extended ip 192.168.10.0 access list allow 255.255.255.224 192.168.5.0 255.255.255.0
  pager lines 24
  asdm of logging of information
  Within 1500 MTU
  Outside 1500 MTU
  IP mask 255.255.255.224 local pool VPNPool 192.168.10.1 - 192.168.10.30
  no failover
  ICMP unreachable rate-limit 1 burst-size 1
  don't allow no asdm history
  ARP timeout 14400
  Global 1 interface (outside)
  NAT (inside) 0-list of access inside_nat0
  NAT (inside) 1 0.0.0.0 0.0.0.0
  NAT (outside) 0-list of access outside-nat0
  inside_access_in access to the interface inside group
  Access-group out_access_in in interface outside
  Route outside 0.0.0.0 0.0.0.0 70.91.18.206 1
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  Floating conn timeout 0:00:00
  dynamic-access-policy-registration DfltAccessPolicy
  the ssh LOCAL console AAA authentication
  Enable http server
  http 0.0.0.0 0.0.0.0 inside
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
  Crypto ipsec transform-set esp-3des esp-md5-hmac VPNTransformSet
  life crypto ipsec security association seconds 28800
  Crypto ipsec kilobytes of life - safety 4608000 association
  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
  card crypto IPSec_map 1 corresponds to the address IPSec_Access
  card crypto IPSec_map 1 set peer 50.199.234.229
  card crypto IPSec_map 1 the transform-set VPNTransformSet value
  card crypto IPSec_map 2 corresponds to the address outside_2_cryptomap
  card crypto IPSec_map 2 set pfs Group1
  card crypto IPSec_map 2 set peer 98.101.139.210
  card crypto IPSec_map 2 the transform-set VPNTransformSet value
  card crypto IPSec_map 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
  IPSec_map interface card crypto outside
  card crypto outside_map 1 match address outside_1_cryptomap
  peer set card crypto outside_map 1 50.199.234.229
  crypto ISAKMP allow outside
  crypto ISAKMP policy 1
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 43200
  Telnet 192.168.1.0 255.255.255.0 inside
  Telnet timeout 5
  SSH 0.0.0.0 0.0.0.0 inside
  SSH timeout 60
  Console timeout 0
  management-access inside
  dhcpd outside auto_config
  !
  dhcpd address 192.168.1.100 - 192.168.1.199 inside
  dhcpd dns 75.75.75.75 75.75.76.76 interface inside
  dhcpd allow inside
  !

  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  WebVPN
  internal RemoteTunnel group strategy
  attributes of Group Policy RemoteTunnel
  value of server DNS 75.75.75.75 75.75.76.76
  Protocol-tunnel-VPN IPSec
  Split-tunnel-policy tunnelspecified
  value of Split-tunnel-network-list RemoteTunnel_splitTunnelAcl_1
  dfavier vUA99P1dT3fvnDZy encrypted password username
  username dfavier attributes
  type of remote access service
  rduske vu0Zdx0n3oZWFSaX encrypted password username
  username rduske attributes
  type of remote access service
  eric 0vcSd5J/TLsFy7nU password user name encrypted privilege 15
  lestofts URsSXKLozQMSeCBk username encrypted password
  username lestofts attributes
  type of remote access service
  jpwiggins 3WyoRxmI6LZjGHZE encrypted password username
  username jpwiggins attributes
  type of remote access service
  tomleonard cQXk0RJCBtxyzZ4K encrypted password username
  username tomleonard attributes
  type of remote access service
  algobel 4AjIefFXCbu7.T9v encrypted password username
  username algobel attributes
  type of remote access service
  type tunnel-group RemoteTunnel remote access
  attributes global-tunnel-group RemoteTunnel
  address pool VPNPool
  Group Policy - by default-RemoteTunnel
  IPSec-attributes tunnel-group RemoteTunnel
  pre-shared key *.
  tunnel-group 50.199.234.229 type ipsec-l2l
  IPSec-attributes tunnel-group 50.199.234.229
  pre-shared key *.
  tunnel-group 98.101.139.210 type ipsec-l2l
  IPSec-attributes tunnel-group 98.101.139.210
  pre-shared key *.
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  maximum message length automatic of customer
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the rsh
  inspect the rtsp
  inspect esmtp
  inspect sqlnet
  inspect the skinny
  inspect sunrpc
  inspect xdmcp
  inspect the sip
  inspect the netbios
  inspect the tftp
  Review the ip options
  inspect the icmp
  inspect the pptp
  !
  global service-policy global_policy
  context of prompt hostname
  no remote anonymous reporting call
  Cryptochecksum:6d1ffe8d570d467e1ea6fd60e9457ba1
  : end

  CT OFFICE

  Output of the command: "show run".

  : Saved
  :
  ASA Version 8.2 (5)
  !
  hostname RaleighASA
  activate the encrypted password of Ml95GJgphVRqpdJ7
  2KFQnbNIdI.2KYOU encrypted passwd
  names of
  !
  interface Ethernet0/0
  switchport access vlan 2
  !
  interface Ethernet0/1
  !
  interface Ethernet0/2
  !
  interface Ethernet0/3
  !
  interface Ethernet0/4
  !
  interface Ethernet0/5
  !
  interface Ethernet0/6
  !
  interface Ethernet0/7
  !
  interface Vlan1
  nameif inside
  security-level 100
  192.168.5.1 IP address 255.255.255.0
  !
  interface Vlan2
  nameif outside
  security-level 0
  IP 98.101.139.210 255.0.0.0
  !
  passive FTP mode
  clock timezone IS - 5
  clock to summer time EDT recurring
  DNS lookup field inside
  DNS server-group DefaultDNS
  Server name 24.25.5.60
  Server name 24.25.5.61
  permit same-security-traffic intra-interface
  object-group Protocol TCPUDP
  object-protocol udp
  object-tcp protocol
  Wayne_Access to access extended list ip 192.168.5.0 allow 255.255.255.0 192.168.1.0 255.255.255.0
  Wayne_Access to access extended list ip 192.168.5.0 allow 255.255.255.0 192.168.10.0 255.255.255.0
  Shelton_Access to access extended list ip 192.168.5.0 allow 255.255.255.0 192.168.2.0 255.255.255.0
  out_access_in list extended access permit tcp any host 98.101.139.210 eq www
  out_access_in list extended access permit tcp any host 98.101.139.210 eq ftp
  out_access_in list extended access permit udp any host 98.101.139.210 eq tftp
  out_access_in list extended access udp allowed any SIP host 98.101.139.210 EQ
  out_access_in list extended access permit tcp any host 98.101.139.210 eq 5090
  out_access_in list extended access permit tcp any host 98.101.139.210 eq 2001
  out_access_in list extended access permit tcp any host 98.101.139.210 eq 5080
  out_access_in list extended access permit tcp any host 98.101.139.210 eq ssh
  out_access_in list extended access permit tcp any host 98.101.139.210 eq 81
  out_access_in list extended access permit tcp any host 98.101.139.210 eq 56774
  out_access_in list extended access permit tcp any host 98.101.139.210 eq 5000
  out_access_in list extended access permit tcp any host 98.101.139.210 eq 902
  out_access_in list extended access permit tcp any host 98.101.139.210 eq netbios-ssn
  out_access_in list extended access permit tcp any host 98.101.139.210 eq 445
  out_access_in list extended access permit tcp any host 98.101.139.210 eq https
  out_access_in list extended access allowed object-group TCPUDP any host 98.101.139.210 eq 3389
  out_access_in list extended access allowed object-group TCPUDP range guest 98.101.139.210 5480 5487
  out_access_in list extended access permits any udp host 98.101.139.210 range 9000-9050
  inside_nat0 to access extended list ip 192.168.5.0 allow 255.255.255.0 192.168.1.0 255.255.255.0
  inside_nat0 to access extended list ip 192.168.5.0 allow 255.255.255.0 192.168.2.0 255.255.255.0
  inside_nat0 to access extended list ip 192.168.5.0 allow 255.255.255.0 192.168.10.0 255.255.255.0
  pager lines 24
  asdm of logging of information
  Within 1500 MTU
  Outside 1500 MTU
  ICMP unreachable rate-limit 1 burst-size 1
  don't allow no asdm history
  ARP timeout 14400
  Global 1 interface (outside)
  NAT (inside) 0-list of access inside_nat0
  NAT (inside) 1 0.0.0.0 0.0.0.0

  Access-group out_access_in in interface outside
  Route outside 0.0.0.0 0.0.0.0 98.101.139.209 1
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  Floating conn timeout 0:00:00
  dynamic-access-policy-registration DfltAccessPolicy
  the ssh LOCAL console AAA authentication
  Enable http server
  http 0.0.0.0 0.0.0.0 inside
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set esp-3des esp-md5-hmac WayneTransform
  Crypto ipsec transform-set esp-3des esp-md5-hmac SheltonTransform
  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
  life crypto ipsec security association seconds 28800
  Crypto ipsec kilobytes of life - safety 4608000 association
  card crypto IPSec_map 1 corresponds to the address Wayne_Access
  card crypto IPSec_map 1 set pfs Group1
  card crypto IPSec_map 1 set peer 70.91.18.205
  card crypto IPSec_map 1 the transform-set WayneTransform value
  card crypto IPSec_map 2 corresponds to the address Shelton_Access
  card crypto IPSec_map 2 set pfs Group1
  card crypto IPSec_map 2 set peer 50.199.234.229
  card crypto IPSec_map 2 the transform-set SheltonTransform value
  IPSec_map interface card crypto outside
  crypto ISAKMP allow outside
  crypto ISAKMP policy 1
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 43200
  Telnet timeout 5
  SSH 0.0.0.0 0.0.0.0 inside
  SSH timeout 5
  Console timeout 0
  management-access inside
  dhcpd outside auto_config
  !
  dhcpd address 192.168.5.100 - 192.168.5.199 inside
  dhcpd dns 24.25.5.60 24.25.5.61 interface inside
  dhcpd allow inside
  !

  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  WebVPN
  eric 0vcSd5J/TLsFy7nU password user name encrypted privilege 15
  tunnel-group 50.199.234.229 type ipsec-l2l
  IPSec-attributes tunnel-group 50.199.234.229
  pre-shared key *.
  tunnel-group 70.91.18.205 type ipsec-l2l
  IPSec-attributes tunnel-group 70.91.18.205
  pre-shared key *.
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  maximum message length automatic of customer
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the rsh
  inspect the rtsp
  inspect esmtp
  inspect sqlnet
  inspect the skinny
  inspect sunrpc
  inspect xdmcp
  inspect the sip
  inspect the netbios
  inspect the tftp
  Review the ip options
  inspect the icmp
  !
  global service-policy global_policy
  context of prompt hostname
  no remote anonymous reporting call
  Cryptochecksum:3d770ba9647ffdc22b3637e1e5b9a955
  : end

  Hello

  I might have found the problem.

  To be honest, I'm a little tired and concentration is difficult, especially when access between multiple device configurations. So second pair of eyes is perhaps in order.

  At the moment it seems to me that this configuration is the problem on the SITE of PA

  IPSec_Access to access extended list ip 192.168.10.0 allow 255.255.255.224 192.168.5.0 255.255.255.0

  This is an ACL that defines networks the and remote for a connection VPN L2L.

  Now, when we look at what connection VPN L2L this belong we see the following

  card crypto IPSec_map 1 corresponds to the address IPSec_Access

  card crypto IPSec_map 1 set peer 50.199.234.229

  card crypto IPSec_map 1 the transform-set VPNTransformSet value

  Now, we see that the peer IP address is 50.199.234.229. Is what site this? The IP address of the CT Site that works correctly?

  Now what that said the ACL line I mentioned more early basically is that when the 192.168.10.0 network 255.255.255.224 wants to connect to the network 192.168.5.0/24 should be sent to the CT Site. And of course, this should not be the case as we want traffic to go on the NC Site

  Also worth noting is that on the SITE of the above connection is configured with the '1' priority so it gets first compared a connection. If the VPN L2L configurations were in different order then the VPN Client connection can actually work. But it's just something that I wanted to point out. The actual resolution of the problem, of course, is to detach the configuration which is the cause of the real problem in which ASA attempts to route traffic to a completely wrong place.

  So can you remove this line ACL of the ASA of PA

  No IPSec_Access access list extended ip 192.168.10.0 allow 255.255.255.224 192.168.5.0 255.255.255.0

  Then, test the VPN Client connection NC SITE again.

  Hope that this will finally be the solution

  -Jouni

• 8, no access to the administrator of the Windows account to all the

  Serious problem.
  I tried a lot of things, and that's what I remember to have done:

  It all started when my user account (Administrator) on windows 8 appeared with an error so I couldn't connect.

  The system connect as a guest instead.

  Then, I created a new normal account.

  Then I activated the build in the administrator account.
  I thought I solved the problem, I have not. But I have disabled the build in the account of administrator again.

  AND NOW, I can't get turned on again because every time I try to open msconfig or commando promt or such it ask me the password on the first account, with the error. SO I'm totally lost here.

  Help, please

  Hello

  If you are unable to access the original account, try to create an other administrator account that you can use.

  If you are unable to do this, you may need to use one of the restore options to repair corruption in user accounts.

  See the following Web site for 3 recovery options that you can use.

  How to restore, refresh or reset your PC - help of Microsoft Windows:

  http://Windows.Microsoft.com/en-in/Windows-8/restore-refresh-reset-PC

  Concerning