Issue alert Oracle

Similar Questions

• SCOM issue alert

  We are facing a problem as indicated below with our SCOM server.

  Our SCOM server has been configured to trigger an e-mail alert whenever our Super Admins change the security setting for any folder in the folder named Test Data. We now receive alerts email for all the folders and subfolders in the folder data-Test where, as we should receive the alert only for the folder that has changed. This issue raises more than 50 alerts for each change of security.

  For example: we tried to modify a folder named we received alert for A notebook and also for all records in the data-Test folder as B, C, etc.

  Please advice what is originally this problem setting in SCOM or the operating system.

  Hi Shaik,

  The question you posted would be better suited in Windows IT pro community.
  http://social.technet.Microsoft.com/forums/en-us/category/systemcenteroperationsmanager

• Question: How can I format message summarized as alert Oracle table?

  Hi Expertise,

  I have problem with oracle alert I designed the model for the message it will be veiw table on the mail and this is the model:

  

  then when I tested and sent mail it just like that:

  

  so please help me to find what is the right format and how I can do

  and one more thing please when I was reading the Oracle User Guide alert I didn't thing that (do not use spaces 1 and 2 in the lines of the model of the summary) what this means please help thanks for your time

  Hello

  I guess we cannot table format to alerts, it is better to find another way like pl/sql code...

• Issue of Oracle Wallet

  Good afternoon
  
  Well once more, they have me trying to understand certain issues more than oracle. To make a long story short, one of the servers that we have which is on a separate network, I had to create a portfolio of oracle to connect to our database on the server on an SSL port, out to our dev database. I could put in place using Portfolio Manager and connect to the database successfully.
  
  We are doing this is because we have some configuration DBlinks and we try to extract data from another schema. Well I had to create another portfolio of oracle on another server to go to our test database, but this time, this network has security quite tight, firewall on the switch, ACL on some other hardware.
  
  Initially, that we had to get one of the network guys to open the port to the database because when we realized a tnsping, we do not receive a response. After the change, we have received a satisfactory response, and I started to create the portfolio on the other. All was successful and I edit the sqlnet.ora file similar to the other server. I connect to the database with the schema owner we have a database and I execute a simple select statement to extract data from the other database using the DBlink. My problems is that I'm "" Error: ORA_28759: could not open the file "." Sqlnet.ora portfolio points correct and automatic connection is enabled.
  
  I wonder if there is another port or socket that the oracle portfolio or the DBlinks uses that network could possibly be blocking. We do not have DBA enough so we're stuck on trying to understand this.
  
  Sorry for the long post.

  Check the permissions on the directory where the wallet file is placed.

• How can I stop Windows Live Messenger issuing alerts every minutes, hours and days of the year? I don't use it.

  I do not use Windows Live Messenger, but he insists on the display of alerts telling me to connect. Why it does this and how can I stop without causing problems in other areas? I know nothing about it except that the people who try to contact me (I guess) can do it without going through channels such as email or telephone.

  I do not use Windows Live Messenger, but he insists on the display of alerts telling me to connect. Why it does this and how can I stop without causing problems in other areas? I know nothing about it except that the people who try to contact me (I guess) can do it without going through channels such as email or telephone.

  I assume you have Windows Live Messenger, because you have installed the Windows Live Essentials.
  If so, a brief explanation...
  Windows Live Essentials includes some programs that can be installed or NOT, must be installed. You can choose whoever you want.

  Now, you have 2 options...

  1. you can disable. He will remain in the system but inactive.

  2. you can purely and simply uninstall it, and it will be out of the system.

  RE: Disable Messenger
  Open MSN Messenger > at the top, click on tools > click Options > column to the left, click on Sign In > straight column, uncheck all boxes > click OK done wnhen.

  RE: Uninstall Messenger

  Start button > in the search box, type programs and features > press the Enter key. Scroll down to Windows Live Essentials > right click it > click on uninstall...
  Follow the guests but be careful to screen > it will ask you what program to uninstall. Select Windows Live Messenger. Follow the prompts.

  You can check out this tutorial:
  http://www.dkszone.NET/uninstall-remove-Windows-Live-Messenger-How-to

• 6.7 issue alert

  1. is it possible to program alerts email alerts & generation of tickets using the respective parties on it act?

  thathanks in advance.

  The short answer is 'yes '.

  A more detailed answer depends on your specific needs for email notification and generation of repair tickets. You can easily configure notification by email through the user interface of rule, such as discussed in 6.7 How to create emails for critical messages. Generate tickets in the cure is a bit more complicated. More complex integrations with appeals involving the two-way recognition and compensation of alarms in general requires some PSO to be implemented.

  Kind regards

  Brian Wheeldon

• ASA 9.1 issues with Oracle database

  Hello world

  Having a strange problem.  We have recently migrated to the FWSM to ASA-5585 X 9.1 2 current execution.  As we have done, we have problems from an application in the DMZ server - talking to a DMZ - B DB server.  The error we get in Oracle is ORA-12592: Bad Packet.  Read about it says it could be the network, and our DBA tell us that they have seen the error for the first time about 4 hours after our firewall migration.  Note, inspect SQL is DISABLED.  We did catch on each server and input and output interfaces, but I see nothing special.

  Anyone have any ideas?

  You have recovered the entrance and exit capture, please search for the TCP URGENT (wireshark filter flag

  TCP. Flags.URG == 1) and check if it is used by applications orable. The ASA by default clears this flag, so if your application uses this indicator (like many oracle applications), you must configure a tcp map to enable it.

  Kind regards.
  Meshaal previously

• Issue of Oracle SQL Developer

  Hello

  The problem is that when I execute queries "heavy" through SQL Developer (v. 4.1.1.19 or back) the IDE does not meet any other action during the execution of the query (queries) (I can't cancel the task). I mean if want to connect to another diagram or choose an option from the menu of the IDE, then I have to open a second window of SQL Developer. Why is it so... Is this something I did wrong?

  After further investigation, I think that the following tips will help you to avoid situations where a request seems to have been cancelled but...

  1. He continues to run on the DB.

  2. subsequent attempts to use or to break this connection are blocked.

  3. another action (as if we were trying to close SQL Developer) causes the interface user to hang completely.

  Your first choice should be to install an Oracle client (full or instant) and configure SQL Developer in Tools > Preferences > Database > advanced to use the JDBC OCI/thick driver.

  If you do not want to install an Oracle client and prefer to use the JDBC Thin driver by default, then adding this to the file sqldeveloper.conf to your installation should help:

  AddVMOption - .net .disableOob Doracle = true

  The full dump thread you provide merely reflects the fact that the request does not actually get cancelled, the login is locked, and any other attempts to use it will hang. Anyway, as long as the user interface does not block, even if a request did not get cancelled at the DB level you should always be able to do things like...

  1. open an unshared connection (Ctrl + Shift + N) of the worksheet occupied this connection.

  2. create another name of the connection with the same details as the locked connection and use it.

  3. open Tools > Sessions of the monitor for a user with enough power and kill the hanging session using the menu popup kill .

  I hope this helps.

• How to handle "file system almost fulll" issue in Oracle 11 g?

  Hi DBAs,

  I got a warning that the file system/u01/app/oracle/product is full of 99.99% and the storage disk is also full.

  What I'm supposed to do in such situation?

  DB environment:

  AWS

  version: 11.2.0.3

  storage type: EBS

  Kind regards

  Ritu

  Are you sure these log files are only a few kilobytes? .. or do you, wait...

  Run the following command to list all the *.log files modified in the last 7 days as well as to its current size in KB

  find/u01/app/oracle/product - iname "* .log" - mtime-7 - printf "%p %k\n.

  The mount point is/U01?... or is - this/u01/app/oracle/product?

  You can also use (and customize) the statement above to a different path, type of file, etc...

  HTH,

  Thierry

• ORDER BY issue in Oracle

  Hello, all,.

  I have a query that has several columns and two trade UNIONS.

  In the end, if I use lname fname ASC ASC ORDERBY it works fine.

  If, however, I use ORDER BY lower (lname) CSA, lower (fname) CSA it breaks.

  I tried ORDER BY nlssort (lname) CSA, nlssort (fname) CSA and that crashes too.

  This is the name and first name columns.  English.  The character only non-lettre which should be in each column is an apostrophe (for names like O'Brien, etc..)  Even in this case, the nlssort should work.

  But in all cases where it breaks, I get a "ORA-01785: ORDER BY point must include the number of an expression in the SELECT list" error message.

  I am trying to use lower() or nlssort() this is because some names were not registered in own case, and I want to sort alphabetically, not in order alphabetical superior then in alphabetical order below (as seems to be the default Oracle.)

  Default:     Andy                    Needed:  Andy
               Betty                            Betty
               David                            charlie
               charlie                          David
               donald                           donald
  

  How can I get what I want, if lower() and nlssort() do not work?

  V/r,

  ^_^

  How about you add to your SELECT statement:

  Lower (lname) LIKE lname_lcase, lower (fname) AS fname_lcase

  then change your ORDER BY for:

  ORDER BY lname_lcase ASC, ASC fname_lcase

  I'm not familiar with the Oracle's SQL language, but the error seems to indicate that you cannot sort on the result of a function inline within the ORDER BY statement.

  -Carl V.

• Issue of Oracle SQL Developer when you use VPN (Cisco)

  All,
  
  We have a somewhat obscure issue with connectivity SQL Developer to our databases of the laptop has distance from the employee.
  
  The database is hosted inside our firewall and when the employee is trying to connect to the database that it receives the following error message:
  + "Encountered error: an error has occurred to perform the requested operation: the network adapter could not establish the connection." Code provider 20 "+"
  
  I think maybe I saw the error at some point as well...
  Status: Failure-Test failed: IO error: the network adapter could not establish the connection
  
  Note: It gets this error when you are connected to our VPN & so that it can connect through SQL * more on that same basis. It gets the error without worrying if he uses the option to enter tnsnames in SQL Developer or if it uses the "basic" connection type
  
  What is interesting, is that if he disconnects the VPN, will turn off its wireless connectivity, then hard-wire in our network, it can connect, without issue.
  
  The strangest part for me, is that although it cannot connect to the database using SQL Developer, it can connect through SQL * more. It can ping the IP source address very well, he can tnsping database without problem, it can connect through SQL * Plus, it just cannot connect through SQL * Developer. Since SQL * more and tnsping work, I know that it can access the db server through port 1521, so I don't think it's a problem of port.
  
  Another weird thing: when it connects to our network via a 'old' virtual private network (VPN open) there is no problem.
  
  His machine is Windoz 64 bit (HP laptop) and it uses the latest version of the SQL Developer and a JAVA virtual machine.
  
  Also interesting: I also have a Windoz 64 bit computer laptop (Lenovo) and I don't have the same issues, as it does. I am however running an older version of SQL Developer and probably an older JVM.
  
  I dug around a bit, looks like maybe it has something to do with IPv6? No idea what to do next, except have my network guy look at the logs of firewall to try to grasp where the connectivity has been ignored.
  
  Any ideas or suggestions would be appreciated. I tried all sorts of things (giving him my file tnsnames.ora and sqlnet.ora, manually editing these files, try IP addresses instead of host names, host names I tried with the doman.org extensions, etc.).
  
  Still, any suggestion would be appreciated and I thank very you much.
  
  Rich
  
  Published by: rmurnane on October 23, 2012 10:58

  If it is IPv6, you can try adding

  AddVMOption -Djava.net.preferIPv4Stack=true
  

  at \sqldeveloper\bin\sqldeveloper.con

• Security issues in oracle ApEx

  Hi all
  
  I have created a process page and who is called by request = 'DELETE '.
  
  And I gave the permission for all schema userbased on roles.
  
  I opened a session with the user "XYZ" and this user donot do you have delete privileges. But what firebug fork and execute the command "doSubmit ('DELETE')", it removes record in my table. This user donot have privileges yet, we are able to do the delete operation.
  
  Pls help me on how to avoid this.
  
  Thank you
  Sudha

  Hi Balu,

  did you get your process with an authorization? It is not sufficient guarantee that the button Delete.

  Concerning
  Patrick
  -----------
  My Blog: http://www.inside-oracle-apex.com
  APEX Plug-Ins: http://apex.oracle.com/plugins
  Twitter: http://www.twitter.com/patrickwolf

• Issue of Oracle

  I need help
  
  The user enters the date of the schedule, for example 11/08/12
  start_time 1100 and number
  and start_ampm 'P '.
  and worked_hours as 8.5 and gets the format 8.50
  Now we automatically calculate end_time like 7:30 A (and next day)
  
  I need a function or sql to get the end_date
  
  If schedule_date is 11/08/12 and start_time is 1100 and worked_hours is 8.5 (8.50) then end_time must be P 730 same day
  Any help is appreciated

  user_anumoses wrote:
  I need help

  The user enters the date of the schedule, for example 11/08/12
  start_time 1100 and number
  and start_ampm 'P '.
  and worked_hours as 8.5 and gets the format 8.50
  Now we automatically calculate end_time like 7:30 A (and next day)

  I need a function or sql to get the end_date

  If schedule_date is 11/08/12 and start_time is 1100 and worked_hours is 8.5 (8.50) then end_time must be P 730 same day
  Any help is appreciated

  Use built in functionality to date oracle.

  Convert your input from the user (which I suppose is strings and numbers) in an oracle date. You do the math to add the hours worked and then with this date you can he split and display it as you see fit.

  for example

  SQL> ed
  Wrote file afiedt.buf
  
    1  with t as (select '08/11/12' as start_dt
    2                   ,'1100' as start_time
    3                   ,'P' as start_ampm
    4                   ,8.5 as hrs
    5             from dual)
    6  --
    7  select dt
    8        ,to_char(dt, 'MM/DD/RR') as end_dt
    9        ,to_char(dt, 'HHMI') as end_time
   10        ,decode(to_char(dt, 'AM'),'AM','A','P') as end_ampm
   11  from (
   12        select to_date(start_dt||start_time||start_ampm||'M', 'MM/DD/RRHHMIAM')+(hrs/24) as dt
   13        from t
   14*      )
  SQL> /
  
  DT                  END_DT   END_ E
  ------------------- -------- ---- -
  08/12/2012 07:30:00 08/12/12 0730 A
  
  SQL> ed
  Wrote file afiedt.buf
  
    1  with t as (select '08/11/12' as start_dt
    2                   ,'1100' as start_time
    3                   ,'A' as start_ampm
    4                   ,8.5 as hrs
    5             from dual)
    6  --
    7  select dt
    8        ,to_char(dt, 'MM/DD/RR') as end_dt
    9        ,to_char(dt, 'HHMI') as end_time
   10        ,decode(to_char(dt, 'AM'),'AM','A','P') as end_ampm
   11  from (
   12        select to_date(start_dt||start_time||start_ampm||'M', 'MM/DD/RRHHMIAM')+(hrs/24) as dt
   13        from t
   14*      )
  SQL> /
  
  DT                  END_DT   END_ E
  ------------------- -------- ---- -
  08/11/2012 19:30:00 08/11/12 0730 P
  

  Published by: BluShadow on 8 August 2012 15:29

• WOOF Application Framework install issue - for Oracle Utilities SDK 4.0

  Hello
  
  I hope someone can help me, I'm really confused.
  
  I have a working of MDM 2.1 installation and everything works.
  Now I need to install the SDK WOOF to start coding in JAVA, but since I got a new mstill to this I don't really understand where is the application server. I though that I have that installed already. But it is not found in C:\ouaf\demo.
  
  I have the framework installed, I do not understand why the SDK says bad file.
  Oracle Utilities Application Framework V4.1.0 multiplatform is the one that I installed it.
  
  Here is the doc to install:
  http://www.box.NET/shared/k86v1a4gtc793ho1zc20
  
  Here is the part of the doc to install:
  • Application ARF development (exploded) and 32 - bit server form. The installation will prompt you for the name of the folder where it is installed. Note the first 2 digits of the two SDK versions (for example "4.0") and application server must match.
  
  I found the number of patch for the SDK here: (but where can I find WOOF app server?)
  http://blogs.Oracle.com/theshortenspot/entry/new_releases_of_oracle_utiliti
  10043375 - oracle Utilities SDK 4.0.0.4 (for ARF V4.0.2 products) based.
  
  Published by: LodestarGuy on July 3, 2011 11:57

  Go to support.oracle.com and search article 1210804.1 knowledge base. It has links with the SDK, you must work with WOOF v4.1.

• Periodic alert Oracle...

  Hello everyone...
  
  I am having 1 problem... If have created an alert one periodical... its works perfectly... when I check through application - control e-mails are coming... but when I'm planning by periodic alert (complete procedure..)...
  
  
  Recurring alert schedule starts and completed in the time allotted... but periodic alert Planner not pulling... well alerts wanting to help me with that... or even wanting to share a guide step by step.

  Hello

  What is the version of the application?

  Please see if these documents help.

  Periodic alert does not run at the scheduled time, runs when periodic alert Scheduler Runs [1016672.102 ID]
  Periodic alert will not run at regular times [152885.1 ID]
  Periodic alert does not get a result over a Db-link when it runs on demand [ID 1078233.1]
  Automatically disabled periodic alert Scheduler [ID 370492.1]
  Scheduled for the day of the month, periodic alert runs on day activated [ID 427965.1]

  Thank you
  Hussein