Connection WiFi is keep falling Satellite M40X

Hello

I use Satellite M40X series and use built in wireless device to connect to the internet.
I use T * TG484v7 son wireless router.

Wireless device is plugged into the next room, I have no problem with the connection when using desktop Mac but some how Toshiba laptop does not properly, connections fall Dungeon and I have plug it back manually.

I use firewall Kesperky.

Any idea?

Thank you

Hello

First of all, you should check if a new WLan driver is preinstalled on your laptop.
I'm not quite sure what WLan card you have, but if you're using the Intel card, then you could check and download the latest Wlan driver from the Intel m page.

Second, you must turn off option in the properties of card WLan to save energy.
(-WLan card-> properties > Device Manager-> last tab called Power Saving)

In addition, the properties contains the Advanced tab. This tab also contains an additional option that could help you increase the power of the WiFi signal.

By the way; the WLan would always disconnect if the WiFi signal is too low

Welcome them

Tags: Toshiba

Similar Questions

  • Do not connect WiFi always on my Satellite Pro P300-19 q

    Please help me... Please!

    I just got my new replacement P300-19 q after my previous had a defect on the keyboard AND the WiFi. My question remains however, WiFi is not connecting. OK, this isn't quite true, some how it connected last night after the service to Tiscali customer helped me Yes anf it is lit on the front of the unit. Tonight... no luck! I really think it's to do with the Toshiba ConFigFree software.

    Can please please please (on bent knees) anyone help?

    AFAIK ConfigFree is just surveillance and setting up a Wi - Fi connection software you probably use Windows settings.
    You can remove ConfigFree system and check if the WLAN connectivity will work better.
    Please test and send feedback.

    Also try restarting your router.

  • Satellite M40X - WiFi connection no longer works

    Hello

    The WiFi on my Satellite M40X has stopped working.
    ConfigFree verdict: wireless communication switch: inactive
    Diagnosis of Toshiba: Atheros AR5005GSwireless network adapter version 3.1.2.45 is OK.

    If the switch is the cause of the problem?
    When sliding on 'on', the red LED lights up.

    Thanks a lot for your help
    Roussco, France

    Hello

    There are display settings important to do to be able to use the Wlan.
    First you must activate the Wlan: generally it takes the switch Wlan on POSITION (LED should be bright) and you must activate the Wlan using the Fn + F8 key combination.

    Is this possible?

    By the way: what system are you using?

  • Satellite M40x-119: connection WiFi disconnects frequently

    Hello

    I have a portable computer Satellite m40x-119. my wireless disconnects frequently after awhile at each connection. I have a roboticts wireless adsl modem. I don't know what to do or what to download. I will be happy if you can help me.

    with best wishes...

    Rasit Turkmen, istanbul, Turkey.

    Hello Rasit

    First of all, you can try to install the latest driver, you can find on the download page of Toshiba under http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

    By the way: did you test with another router? Is it the same situation?

  • Satellite M40X - how to get WiFi working again?

    Hello

    Sorry to bother with a question that has probably been implemented responded here before, I could not find.

    Have this old laptop that had its pilot wireless has changed. My long time friend did something for her so my iphone would be hotspot to it but it buggered the wifi connection. It gets only internet when it is plugged and I want wifi to work again.

    How can I keep someone please.

    Toshiba Satellite M40X PSM4XM-03Z008

    Thanks in advance

    Until we start discussion tell us about your machine.
    What operating system do you use?
    Wireless network adapter is correctly installed (listed in the Device Manager)?
    Can you turn it correctly?

    When you analyze the area is your visible WLAN for your M40X or WLAN is completely unusable?

  • Connection Internet keeps falling with MacBook Pro OS 10.11.3

    Wifi works fine in our House on all of our devices until I turn on my MacBook Pro. Then the wifi said even it is connected on all my devices, but nothing will load on any device. I have to restart our modem and router. Then it will work for a few minutes and go out again. A little background - I recently purchased a used MacBook Pro (2012) on eBay (to replace the 2011 water dumped old MacBook Pro my 1 year on). He had been wiped and El Capitan 10.11.3 installed. I started to load my programs and files on the computer and everything worked fine for about a week and then I started having this problem. I called the internet provider 10 + times and they even sent someone to watch our connection. They keep telling me it should work now the problem did not get better. Any suggestions?

    Do you by chance, your MB Pro doing a big download or download in the background?  This can make it appear that the wifi is down for all devices (actually its just really slow with a lot of latency leading to delays).  Pictures is known for this.  With the MB Pro connected to wifi, access Photos > Preferences > iCloud and just below icloud library upstairs, you see a message that the activity occurs?

  • Satellite P875 - 32L - is unable to reconnect to the last connected WIFI access point

    I have a problem to reconnect to the last connected WLAN provider, with my Satellite P875 32 L.
    WLAN is switched on and shows all the neighbors access points, but it fails to whoever I logged before the reboot, or before you go to the rescue of the list.

    I'm going in service options for WLAN, sometiimes up to 5 times, then it undermines meet usually.
    It's well annoying.

    I have had this with the other 30 satellite of P870 too, but something so this behavior have disappeared. So there must be a solution.

    Hello

    You're talking about your private Wlan at home?
    If you had the same problem using another laptop too, it could be possible that this isn't a problem with the network s laptop wireless card or Wlan configuration but with the WLan router.

    You should definitely reset/reboot the rooter.
    In addition, check the settings of the IP router and or mac address filtering.
    Change also the type of encryption and Wlan channel.

    You have to try different combination turn off just to test the WiFi encryption and check if the laptop would connect to the Wlan open correctly.
    But the Wlan encryption must always be defined in order to avoid improper use of the Wlan access point.

  • Drive HARD keeps falling asleep after a minute on my Satellite M40

    Satellite M40x-175.

    I've updated the BIOS with the latest version (1.60), and since the disc hard continues to fall asleep after a minute, no matter the power Windows or Toshiba Power Saver Settings.

    Toshiba will be out an updated BIOS update soon?

    Help, please.

    Hello

    I put t think that it s a bad BIOS function. As far as I know in the BIOS, you can change the settings for the HARD drive. Please check. Moreover, Toshiba Power Saver disabled power Windows settings. Have you checked the parameters of energy saving modes?

    Good bye

  • Satellite M40X-189: how to connect RGB port to port RS232?

    Hello
    as you know the satellite M40X - 189 P - M 730/XP has a port monitor RGP and doesn't have a RS232 port.
    I work with device of automatic titration requiring the RS232 port for connection!
    No idea how I can connect my laptop on this unit!

    pls help
    Thank you
    Omrankl

    Hello

    AFAIK the RS-232 port is a serial port and I don t think that it of possible to connect the RGB port to the RS232 port.
    But I found the site useful:
    http://www.Ontrak.NET/USB.htm

    You will find a description how to connect the USB port to an RS-232 port.
    You need an interface ADU.
    Click on the link.

  • WIFI on my C850 Satellite can detect the network but will not connect

    I just bought a satellite C850 - PSKCCA-02D00M

    The connection to the LAN works fine however the Realtek RTL8723AE without wireless/Bluetooth will not connect to the network. It can can detect them just does not connect. I used the troubleshooting, and he cannot sort.

    All other devices connect very well as Iphones and Kindle

    In the config is doctor says that the adapter is enabled in a domain and in the adapter another status is down.

    I took back to the initial power and installing and unistalling and reinstalling the adapter using the driver on the website.

    Any help is welcome. I don't want to have to take back just for this issue

    See you soon

    Your WLAN is locked? Can you connect WIFI if you delete the WIFI password for two minutes?
    Have you tried to reboot your router?

  • Ethernet/Wifi keeps falling since the upgrade to windows 10 on Inspiron 7537

    After about 3 attempts to upgrade to windows 10 8.1 I clicked inadvertently this prompt annoying to try again, and finished the upgrade this time.

    Nothing wrong with it except the Wifi and ethernet keep falling. If I do repair troubleshooting or deactivate/activate my ethernet card, then it works again for a few minutes before falling again.

    I've installed every update that is recommended by the Dell Web site, but it has not changed. I have the Inspiron 7537

    Someone recommended measures to fix this can?

    The above didn't solve it for me. Someone else had the same problem

    Google windowssecrets dot com Windows-10-Realtek-PCIe-GBE-Family-Controller-Intermittent-ethernet-disconnect

    or this icon might work for you:

    Suggestion of his "Realtek RTL8411B-US Ethernet controller driver"- and valleys drivers listed are outofdate

    On my problem machines - cards - Device Manager Realteck PCIe GBE Family Controller driver Ethernet properties - network says its version "realtek PCIe GBE Family Controller" 10.1.505 2015 - 05/05/2015 driver date

    Solution download the latest driver realtek.com.tw - Downloads\DellDrivers\Install_Win10_10008_05202016

    This installed a driver 10.8.31 2016 date of 11/03/2016 and working pilot.

    So to make sure I unisntalled, restarted - he discovered and reinstalled - and now networking is good.

    Phew! thus appears the Dell download downloaded drivers are out of date.

  • Satellite M40x-105: Mini PCI Wifi card available?

    Hello

    I recently bought a M40x-105. Does anyone know if she has a mini-pci card to install a wireless card? I know that I can use a pcmcia wireless card.

    Electron

    Hello

    As far as I know the card Mini PCI Wi - Fi is not available for your laptop model. Satellite M40X is no ready wireless and the only option available is the PCMCIA card.

  • Connection WiFi guard fall on my new laptop of HP ENVY m6-k025dx Sleekbook.

    Hello

    I just got my laptop new HP ENVY. Name of product: m6-k025dx. It works on 64-bit Windows 8. I feel a sudden loss and frequent my Wifi connection. When it disconnects, I don't even connect it to cursor (that slides off the right side of the screen and displays the network list) by clicking on the network down button to the right of the screen. I have to restart my laptop to connect again and after 5-7 minutes, I lose again.

    I have tried many suggestions on the amendment to the Plan of power for maximum performance and uncheck "Allow the computer to turn off this device to save power", but nothing seems to work.

    The network driver is Intel Centrino Wireless - N 2230. I have also updated the driver and off Bluetooth and ethernet as part of suggestions found on the web.

    I don't know if it is a problem of Windows 8 / Intel / HP. Help, please.

    Nadeem

    From my own research, if you have an intel centrino N - 2230 network adapter and use 8 64-bit windows, you need a new driver. This adapter has connectivity wifi which are known for problems intel. Check here: http://www.intel.com/support/wireless/wlan/sb/CS-025332.htm and then contact an HP tech via chat and they correct Web site, download and install the new driver from intel. I tried to do it myself, and it did not work. The technology did for me by online chat and remote assistance. Do it for what they tell you it's a hardware problem. It's a problem of network adapter that requires an updated driver. Let me know if it works for you.

  • Satellite M40x-189 heats up when it is connected to the power adapter

    Hey,.

    I have a Toshiba Satellite M40x-189, which is about 18 months old. Recently, I had too replace the battery, but now it seems that my adapter had fried itself. He refuses now too charge my cell phone for more than a few minutes and the part of the adapter that goes into the laptop becomes ridiculously hot even after a few minutes.

    I can't find where too much to buy a new adapter, I get results, but adapters look totally different, can anyone tell me if Toshiba has changed the cards and where too find a power adapter.

    This may help - adapter PA1650 - T 02:100 - 240V AC 50-60 Hz 65W / 3 pins with 19V DC output.

    Also, I find that on the occasions, my laptop just cut. In the middle of everything what I do, and the laptop itself would become so hot, it can't be touched for a few minutes, interestingly, this only happens when the laptop is charging. This problem is not related too my adapter problem, because its been happening for a good month now.

    Thank you, in advance.

    Post edited by: Danny90

    Hello

    I saw your first thread on the power adapter and that other users already suggested the power adaptor can be ordered from the maintainer authorized Toshiba in your country!
    If you n t know how to find the service provider allowed in your country, please take a look on the homepage of European support of Toshiba. You will find a link to the database ASP.

    As you have already said the laptop automatically stops downs have nothing to do with the AC adapter.
    I agree with you for me, it looks like overheating!
    Usually, this happens if fans and cooling modules cannot run with maximum efficiency.
    Dust may prevent the complete rotating fan!

    I recommend to use the vacuum against the bars of cooling hose to clean the fans!
    It should help!
    But please be careful.

  • My wireless HP4620 printer keeps falling.

    My wireless HP4620 printer keeps falling.  I used the WPS button for a wifi connection.  Tried to PIN verson also and same thing, the network connection drop after a few days.  I have configure WPA2 authentication via the web interface, but does not seem to do anything.  I have a model from Verizon Wireless Router A90-750015-07 number.  Any suggesstion is appreciated.  Thank you.

    You can update your firmware printer through the web interface.  When connected, get the IP address and use your browser to access, for example... http://192.168.x.x.  From there, you can do the update of the firmware. BUT until you do that, go to the area of networking and configure your wifi connection and assign a static ip address and give it a DNS address (address of your router).  You can't do the updte of the firmware without the DNS address.  That's what did the trick, I think.  Without the DNS, it will introduce the network every 48 hours (seems to).  My printer has stay connected for a week now.  Good luck.

Maybe you are looking for