Issue by unplugging the place instantly back.

Similar Questions

• Why the back button will not give a list of all the places, I was like before? Now I trudged back one page at a time :(

  Since I downloaded Firefox 4, April 30, 2011, the previous button did not list that she used to give when you hovered above him, of all the places that you had been to travel to where you are on this tab. That we gave the opportunity to directly back at the beginning of his cyber-travel on this tab, or choose any other port of call on the way. Now I must return to my starting point, or to an earlier point, laboriously click after another. Hope that enough information for you to give the image.

  The arrow to open the history tab of the previous buttons and following was removed in Firefox 4.

  Use one of the following methods to open the tab history list:

  • Right-click on the back or next button
  • Press and hold the left button of the mouse on the active back or forward button until the list opens

  You can watch this extension:

  • Backward forward history Dropdown: https://addons.mozilla.org/firefox/addon/backforedrop/

• Must unplug the headphones and then plug it back in to get them to work on start up

  Must unplug the headphones and then plug back in to get to work, they use to work all the time if I just left it plugged in. Out of the blue they stopped working. In Device Manager when I boot up (it is when they do not work), it shows that its speakers on only, once I have unplug my headphones it appears... There is no unknown device anywhere. It shows like "Cirrus Logic CS4208". As much as I know there is no new drivers... Is there anyway I can force bootcrap to re-download the drivers?

  You can use OS X BC Assistant for re - download drivers of BC and the re-install. Do you have any active Windows automatic updates?

• I was on YouTube with my helmet and then I unplugged the and plugged them back and now I don't got no noise at all.

  I was online on you tube with my headphones and then I unplugged the and plugged them back and now I had no noise at all, what can I do? I checked the audio Manager and it seems fine.

  Hello

  (1) you use Internet Explorer or another browser to go online?

  (2) this happens on all websites and pages?

  (3) other sounds work fine on the computer?

  (4) may I know the operating system you are using?

  (5) were there any changes before the show?

  I suggest you to follow the steps mentioned below and check if it helps.

  Method 1: No sound in Windows.

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Method 2:

  Check the playback settings to see if the device is turned off / disconnected.

  Method 3: If you are using Internet Explorer, check if this option is enabled.

  a. Click Start, type "inetcpl.cpl" and press to enter.

  b. click on the Advanced tab.

  c. scroll down to see the multimedia section and make sure that "play sounds in Web pages" option is selected.

  d. click ok to apply the changes and see if the problem still occurs.

  Restart Internet Explorer and check if you can hear the noise.

  You can also try to update flash player on your computer and check if the problem is resolved.

  For more information, see the link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  I hope the information is useful!

• Can't seen to return the files to back up. presentl all backup takes place by carbonite.

  Original title: cannot activate the backup.

  can't seen to return the files to back up.  presentl all backup takes place by carbonite.

  Ask the staff to Carbonite support.

• My computer is constantly disconnected from the internet and to reconnect I just unplug the cable for less than a second and it starts to work instantly.

  My computer is constantly disconnected from the internet and to reconnect I just unplug the cable for less than a second and it starts to work instantly. Does every 5 to 10 minutes and it gets frustrating. It is not the cable modem because it is constantly connected, and I repeatedly checked.
  I have this problem with all programs on the internet and she does every day and probably every 5 to 10 minutes.

  Hello

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• I recently purchased Photoshop elements 13 in a box and I want to activate it. For do I need the serial number, but I don't find it in one of the places it might be (on the album cover) or on the back of the box of the product. What should I do next?

  I recently purchased Photoshop elements 13 in a box and I want to activate it. For do I need the serial number, but I don't find it in one of the places it might be (on the album cover) or on the back of the box of the product. What should I do next?

  DWZ,

  To contact support for a serial number or activation number, please click on the link below:

  (be sure to connect to adobe.com with your Adobe ID first)   support

  Kind regards

  Guinot

• I resize my image of window, so everything is OK, but as soon as I change window on the next page the image goes back to the small size. How can I stop this product. This happens when go on facebook or any other place. Help me please.

  reduced the size of the General image that I see toby about a third - I resize by pressing the CTRL key and using my mouse scroll button to extend the set of the image so that it fills the screen. As soon as I go to the next page the entire image back to original size and I have to repeat the action again.

  The function Zoom of Page Firefox does a level of field by field to save favorite settings level users zoom, there is no default Page Zoom level setting in Firefox.

  Try the extension Default FullZoom Level:
  
  https://addons.Mozilla.org/en-us/Firefox/addon/6965

  Or the NoSquint extension:
  
  https://addons.Mozilla.org/en-us/Firefox/addon/2592/

• Unplug the power to the laptop causing issues of java.

  When I unplug the power cord from my Dell D630 I am unable to run some Oracle applications using java.  Parts of the screen (including the sidebar) seems to blink and does not at all what I'm typing.  If I reconnect the power cord stops flashing and the Oracle application session begins to work very well.  My research leads me to believe that the Aero theme is involved. Running Vista SP2 and Oracle Jinitiator 1.3.1.22.  I've upgraded to the new java but no help. If the computer laptop cord is plugged it all works fine.

  Any ideas?

  Hi gdoogle1,

  Oracle Jinitiator 1.3.1.22 seems to be compatible with Windows XP, 2003 & 2000.

  You may need to download Oracle Jinitiator 1.5.0_06 which is compatible with windows vista, see the link below:

  http://www.Oracle.com/technology/products/forms/htdocs/10gR2/clientsod_forms10gR2.html

  You can also check with the provider of the program for a plug-in or an update of the program, see the link below:

  http://www.Oracle.com/technology/software/products/developer/htdocs/jinit.htm

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Sequence keys in the language bar back to a strange 'by default'

  Hello world

  I use several European languages (Latin alphabet) more the simplified Chinese IME on a daily basis and, in Windows, I've always had (LAlt + SHIFT + n) keystrokes for each of them.
  The problem in my Windows 7 Enterprise (at College), is that the keystrokes going back by default without any reason (often I discover after will be identified in the morning from sleep). Also weird is that the default 'come back' seems to save the Chinese IME, which kept its sequence of keys as LAlt + shift + 4 without problem.
  My system is in simplified Chinese, but I would like as my default keyboard in Australian English. I tried to play now with these variables. If my default keyboard is in Chinese I can return to my settings favorite without a problem... but if I select my default keyboard in Australian English, the sequence of keys to the Chinese IME stops working.
  I don't mind too much if the default keyboard should match the language of the system due to a bug... as long the keystrokes remain in place and allow me to quickly scan between languages!
  Other people with the same issue? Ideas how to solve this problem permanently?
  See you soon,.
  Alfonso

  Hi Alfonso,.

  This problem may occur because of keyboard settings are corrupt.

  First of all, I suggest you to check the language bar and keyboard shortcuts.

  a. open the language bar settings.

  b. Select Text Services and input languages. First we will click on "language bar".

  Language bar settings:

  Radio button settings you:

  Floating above your documents, the default language bar (where you can always reduce to the taskbar).

  Anchor the taskbar by default (you can always expand it into floating mode), or hide it completely.

  The boxes below that allow you to:

  Make the language bar floating, semi transparent when not in use, and

  Display additional icons at any time, even in the taskbar: help maximize (float) and parameters and also icons for speech recognition if you use those.

  Show text labels when the language bar is floating, as in the example at the top of this page. In other languages like Spanish, labels can also appear when it is docked in the bar of tasks, but Chinese IME only display the labels in floating mode.

  Keyboard shortcut settings

  The next on watch the Advanced key settingstab:

  Key advance settings, you will find options to disable or modify the any of them by clicking on the "Change Key Sequence" button... ».

  For example, changing "between the input languages" accent grave (') and put the switch of layout at least save me from myself most of the time.

• Half the Office disappears when you unplug the external monitor

  I have a MacBook (early 2011) with a single office shared between two monitors - with one hand on the internal screen and the other half on a Dell 23 inch. The Dell is my first when I use both at the same time. Until a few months ago, when I unplugged the external monitor, all windows automatically appears in the monitor to the laptop, including the menu bar and dock.

  After an operating system upgraded a few dos systems (I'm on version of El Capitan.6), when I unplug the screen seems not to register - in other words, the left side of my office, including the menu bar and the dock, and all the apps that were there just to disappear. So my laptop seems to think that the other view is always connected and direct, unless I restart with the detached monitor. (I unchecked 'Displays have separated spaces') in Mission Control.

  Is that what I can do to force the Office to redesign the internal screen? (Note that the display is a Dell S2330MX, which seem not to support any Mac OS - so who could answer the question here.) Thank you

  I've known who issues from time to time, try to close and reopen the lid, which needs to redraw your office.

• My home page is MY MSN and when I go to a certain article and I am in fact and that the browser goes back to the top of the page MY MSN rather than where I left

  If I'm browsing subjects on my homepage and find one that reads my interest, I click on it and the browser goes on this site for me to read. When I'm through with that I hit the back button and on most Web sites, the original page back to where you were before you click on the interesting element. Not MY MSN, which is my home page, it returns to the top of MY MSN, which is irritating, especially if the elements that interest me are a group at the bottom of page on MY MSN and I want to read every 5 or 6 of them. How can I get the browser to return to the place I left?

  Try to open the "statutes" in a new tab, and when finished read each article close the tab I hope the MY MSN page original will maintain the position you left it to (unless this page has an automatic refresh frequency, to add new items to the list).

• Example: Pavilion 550qe: have just got a QED Pavilion and can not find the place where the monitor.

  Have just got a 550qe of Pavilion and can not find the place where the monitor.   The image on the book they sent shows the exact card, I need but can't find anywhere on the back of the PC.    There are a few plates little who have the drivers there, but do not want to start removing the panels unless this is where some of the connections are hidden.

  Hello

  Can't find the official specs of HP. But since the following specifications

  |-Intel-Core-i7-|-Windows-10-|-Silver.product.100241370.html http://www.Costco.com/HP-Pavilion-550qe-desktop-

  There

  Ports:

  • 2 x USB 3.0
  • 2 x USB 2.0
  • 1 x HDMI
  • 1 x VGA
  • 1 x jack Headphone-out/microphone-in the drop-down list
  • Multi format card reader

  Depending on your monitor, you can use HDMI or VGA to connect. What is your monitor (make and model)?

  Kind regards.

• "App: unplug the slave" method

  I tried to use the ' Appslave isconnect "method on a project with a goal of RIO (MyRIO) currently connected and the method completes without error, but it does not cut the target in my project. I tried to play, selecting items in the project window and making even the project window above and active before you make the call without success.

  How this method is intended to be used?  What happens if I multipl target in my project?

  OK - this issue initially came from a position of LAVA and I'll copy paste the answer I posted here even IF not all relevant here in case someone else needs!

  I played a bit more with the feature today and it really seemed that the invoke node called "App: unplug the slave" had to be called in the aim of RT himself to work, as that proposed on the forum of NOR. Then, I tried other tests to see if it is possible to run a VI directly on an RT target (which is located in your project). At first, I thought that it was not possible and that he could not understand until I found this link: http://forums.ni.com/t5/LabVIEW/Loading-and-Running-a-VI-on-a-cRIO-from-a-PC/td-p/796657 . I think that gives you actually your solution by explaining that each target has its own instance of the application (also the search to 'Work with Instances of application', as a 'Concept' in the help file for LV [2014 in my case]). Is the way to acquire (or at least my way because I couldn't directly give the IP address of the RIO) was:

  -App-> Project.ActiveProject->-> [appropriate Index] targets-> Application-> "disconnect from the slave.

  Notes:

  -"Project.ActiveProject" seems to be a scripting (bottom of bue) VI

  -The property node 'Application' is located near the end of the list

  Silently, it disconnects the cRIO and may be able to delete your popup if done shortly after asking the RT to restart. With the same reference App, you can also programmatically launch a VI to the target host (even by pressing the arrow to run with cRIO selected target.) It could certainly be useful for you too if you need delay the restart to stop the pop up. I want to say, deploy your application for CompactRIO with the "Run As Startup" active, then get the reference of the App, and run a simple VI that resets the CompactRIO after a few seconds late. During this time, call the node to invoke 'Disconnect the slave' and your pop up should be gone...

  Let me know if it works for you!

• Purpose and structure of the place

  Hello!

  I need help!

  How can I do the following?

  1.) set the new value here - make some changes takes effect the entire table, above and are effective for the 2. wire?

  I tried to structure of the place without success.

  The reason is the reason for which I would like to make is: I want to avoid the always use get - set even when I'm working with objects, typically the array of objects.

  so my goal is, how do I don't see only 10 values in the two tables?

  -----

  My real problem is the following:

  I have an array with objects. The order of objects is very important, cannot be changed. I use a battery - algorithm on elements. Randomly to push a lot of elements in the stack and jump randomly. When I pop, I want to use a set method on the object, (some thing/property indicator). So I want this view to be taken into account memory.

  (If used an enable simle - indexing in the loop, I would have lost the true order of the original array).

  (maybe I can calculate the index of the item that I want to update, but I think that there is an easier alternative to do and I have to use the GET - set again...)

  

  The native implementation of LVOOP is de-val and not of ref.as in most implementations of OOP. If you come from a background of OOP, think like: whenever you plug in a wire, it creates a clone of the object on the thread (or all the objects in the table in your case). As a general rule, this is the desired behavior in about 80% of the cases (when you use a LabVIEW). So consider if you can't do it by using an implementation of val.

  There are several falvours enforcement by reference, where you will have the same objects on the two wires:

  * private data inside the SEQ (single item queue, not replaced by one that follows)

  * private inside DVR (reference data value) data

  being inside DVR

  which application you choose is up to you. From your image/code, I put the object inside the RECORDER. You could create the DVR with the obj in the first loop. In the secend for loop index your items and International preliminary examination to obtain the obj off the DVR for your get - set operation and place it at the back.

  Felix