My home page is MY MSN and when I go to a certain article and I am in fact and that the browser goes back to the top of the page MY MSN rather than where I left

Similar Questions

• From LR6.1 to LR6.3: rename folders created are based on the date of importation rather than the date of shooting!

  I started using LR with version 2... My import workflow was even up to 6.1 and all my files are organized in the same way for more than 10 years.

  I went on LR6.2 given the changes made in the import dialog. But upgraded to LR6.3 think the problem has been resolved.

  But now I noticed that all my photos are renamed and placed in folders corresponding to the date of importation rather than the date of shooting... I rename my files from custom and is gone in this dialogue, but has not as how to restore LR import my photos using the date of shooting. This creates havoc on my hard drives and in LR. I use the date of shooting a lot to find my photos, since I often neglect to add keywords.

  I really need to be able to get the date of shooting on the behalf of my photos and have copied them in the folder the correct date.

  Thanks in advance for your help.

  BTW: something has changed in the way the forum appears. Research is not very powerful... it has not brought something, yet I know that the import dialog has been at length when 6.2 was introduced. In addition, I see no browser passed a few more recent messages. I don't like the new interface.

  Well, I answered my own question. Yes, I was looking for settings in the destination Panel... There is a line that shows what would change the name... and it showed the date of importation as the new name... but actually... It was only to show you what the name change would look like. Because I had a selected image, I thought it would show that the change of name for this image. But it is not related to the image... The import worked as expected... My apologies for disturbing him. .

• Since the update to iTunes 12.4.1.6 I don't see my purchased music. When I try to import my old playlists I get a message saying that the library is not a valid iTunes library. Thus, thousands of songs and hundreds of films and I can't see or play one.

  Since the update to iTunes 12.4.1.6 I don't see my purchased music. When I try to import my old playlists I get a message saying that the library is not a valid iTunes library. Thus, thousands of songs and hundreds of films and I can't see or play one. I see my movie library where it is stored on an external hard drive, but my music was on my iMac.

  Where all the playlists gone and why didn't appear my entire music library? I checked the preferences and iTunes points to the correct folder, BUT only my music purchased appears...

  Same thing happened to me. I tried to replace iTunesLibrary.itl with an older copy, but that has not worked. Then I tried to return a version by resetting the Time Machine's iTunes app, but it would allow me to edit or delete iTunes because it is part of Mac OS X.

  So, I can not sync my iPad or iPhone, update all apps or find my music, that is, the course of the odf, still on my hard drive. ITunes just can't see the library.

  The difficulty of this Apple.

• I have an older iPod Classic, 80 GB, and there most of my top music. I used to manage with an old PC laptop. Since then, I tossed that laptop and bought an iMac. When I try to sync my iPod to my iMac, it tells me that the iPod is already associated

  I have an older iPod Classic, 80 GB, and there most of my top music. I used to manage with an old PC laptop. Since then, I tossed that laptop and bought an iMac. When I try to sync my iPod to my iMac, it tells me that the iPod is already associated with another iTunes account and clear all my music from my iPod if I sync it. The only place where I have my music is on the older iPod. Am I sentenced to lose all my music on my iPod?

  See recover your iTunes from your iPod or an iOS device.

  TT2

• Problem with burning Audio files to a blank CD error "Windows Media Player encountered an error when burning. Check that the burner is connected properly and that the disc is clean and not damaged"

  I recently burned music CD blank so I can enjoy some songs in the car. After that a few discs engraved with success, I received the message "Windows Media Player encountered an error when burning. Check that the burner is connected properly and that the disc is clean and not damaged"when trying to burn audio. To see if it was the m drive, I tried to burn audio files to four separate discs and each of them had the error message. The discs are brand new and have no information on them. I do something wrong or is my burner disconnected? Thanks for all your help and your support! I hope that we can find the cause of this problem so I can continue to make the CDs.

  Consumers concerned,

  Cody bridges

  Could you also confirm that it is playing the discs ok?

  Run the sfc tool and see if it shows anything... instructions here.

  http://support.Microsoft.com/kb/929833/en-us

• I was promised 5 free plugins with purchase of first training pro / total bundle... dance and clearing the Board, foam, burst... where I can find for download

  I was promised 5 free plugins with purchase of first training pro / total bundle... dance and clearing the Board, foam, burst... where I can find for download

  There is nothing extra to download, these effects are included in the installation of After Effects.

  They are in these categories of effects:

  Simulation >

  Card dance

  Caustics

  Foam

  Shatter

  Wave World

  Transition >

  Card Wipe

  Generate >

  Radio waves

• Windows 7 message pop-up cigarette... "local area connection adapter does not work correctly. Problems related to the pilot experience or material"what the devil does that average and that the devil can do?

  When I logged on this morning, Windows 7 gave me the following message... "The connection to the local network problems hardware or driver. For connection to the local network adapter does not work correctly. "My Windows offered solution was go using Windows.  Help

  Hello

  Try to uninstall and reinstall the network adapter drivers.

  Download the latest drivers from the card manufacturer support page.

  Download the drivers and extract them to a folder of your choice.

  In Device Manager, right-click on the adapter.

  Click Update drivers and choose her browse my computer for drivers.

  Choose let me a list of choices, click on disk and point to the folder with the drivers.
  ---------------------------

  Computer network health.

  Check the Device Manager for the entry of valid card of the wire.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a Local Area Connection icon/entry, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Connect you to the menu of the router from a work computer and make sure DHCP is on, and it is configured to assign IPs which can cover the number of computers that are connected (a bit more will be even better).

  Turn off the computer and the router, reset the router and the computer.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  On the State of intellectual property.

  TCP/IP and its variables usually look like this.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  Typical TCP/IP status looks like this.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.
  
  Physical address is the MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.
  
  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2 There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ------------------------

  Also, make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted

  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• If someone is selling his company and that the sale includes the company's computers, are legally transferable software licenses?

  Software license transfer?

  If someone is selling his company and that the sale includes the company's computers, are legally transferable software licenses?

  It depends on the license - all software has its own license.

  Regarding the license of Windows:

  Selling used Windows

  (A) If you have Windows OEM and you don't the have not installed you can sell. If you have installed it you can sell it only with the computer on which it was installed.

  (B) If you have the retail version, you can sell but to follow the EULA says:

  18. TRANSFER TO A THIRD PARTY.

  a. software other than Windows Anytime Upgrade. The first user of the software may make a time of transfer of the software and this agreement, by transferring the original media, the certificate of authenticity, the product key and the proof of purchase directly to a third party. The first user must remove the software before transferring it separately from the computer. The first user may not retain all copies of the software.

  b. Windows Anytime Upgrade software. You can transfer the software directly to a not third parties only with the licensed computer. You can't keep all copies of the software or any previous edition.

  c. other requirements. Before any transfer authorized, the other party must accept that this agreement applies to the transfer and use of the software.

• While I'm trying to remove the MPEG-4 file, it says "make sure that the disk is not full or write protected and that the file is not currently in use.

  Original title: When I'm trying to delete file MPEG4, is not deletion. How can I delete file MPEG4?

  While I'm trying to remove the MPEG-4 file, it says "make sure that the disk is not full or write protected and that the file is not currently in use.

  Hello
   
  Method 1: Ownership of the file and then try to delete and see if that helps.
  Reference:
  How to capture a file or a folder in Windows XP
  http://support.Microsoft.com/kb/308421
  Method 2:
   
  Error message when you try to delete a file in Windows XP: "access denied".

  http://support.Microsoft.com/kb/298345

• I need to remove the uneeded files: Purenetworks and PCFix. But I get: not deletenmrsrc.dll: access denied make sure the disk is not full or write protected and that the file is not in use.

  Original title: remove unnecessary files

  I need to remove the uneeded files: Purenetworks and PCFix. But I get: not deletenmrsrc.dll: access denied make sure the disk is not full or write protected and that the file is not in use.

  Ditto for PCFIX.exe.

  How can I remove these and clean unnecessary files? Thank you.

  Hello

  1. how exactly you are trying to remove it?
  2 have you connected the administrator account?

  Step 1: Check if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.

  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.

  4. When prompted, click on restart to restart the computer.

  Step 2: Take possession of these program at the following location folder, and then check the issue. C:\Program Files\ 

  Reference: How is ownership of a file or a folder in Windows XP

• laptop HP dv 9208nr closed and that the update of windows in progress, now not power upward?

  laptop HP dv 9208nr closed and that the current windows update. Now to the power BIOS will not post any all black screen activity. fan starts for about 3 seconds then turns off. Windows recovery disks have no results.all lights on the computer lights except light hard drive. haven't tried to force now the power button start / stop for 45 seconds so that it is unplugged and no battery then plugged and pushed back the power. no difference. any help please?

  Yes. Read the description of the symptoms on the link that I posted above. You can also email or phone the guy with questions. Click on the 'About Me' link on the page.

• What can I do if I found an iphone and that the device is erased but still linked to account of the former owner.

  What can I do if I found an iphone and that the device is erased but still linked to account of the former owner. ?

  Call your local police.

• Receive the error message "DISC ERROR C:\PROGRAM FILES\MICROSOFT GAMES\RISE OF NATIONS\ART\OPENING WRITING. MAKE sure THAT YOUR DRIVE HARD IS NOT FULL AND THAT THE FILE IS NOT in USE"in rise of nations?

  Original title: rise of nations

  on the rise of nations, I get this error code. How to fix it. DISK ERROR WRITING C:\PROGRAM FILES\MICROSOFT GAMES\RISE OF NATIONS\ART\OPENING. WMV. MAKE SURE THAT YOUR DISK IS NOT FULL AND THAT THE FILE IS NOT IN USE.

  Hello

  
  1. do you get this error during installation, downloading or playing the game?
  2. What is the amount of free space on the hard drive?
  
  Method 1: clean boot the computer and check if the problem occurs.
  
  To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
  
  Note: Follow step 7 to reset the computer to start as usual after the boot process.
  
  http://support.Microsoft.com/kb/929135
   
  Method 2: uninstall and then reinstall the game and see if the problem still occurs.
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
   
  http://www.Microsoft.com/games/thronesandpatriots/default.aspx
  http://www.Microsoft.com/games/riseofnations/downloads.aspx
  
  Hope this information helps

• I need to move my e-mail to another account. Moved jobs and that the e-mail does not exist. Unable to get my password.

  I need to move my e-mail to another account. Moved jobs and that the e-mail does not exist. Unable to get my password.

  Hello

  Please see change associated with Adobe ID email address

  Hope that helps!

  Kind regards

  Sheena

• I created an interactive navigation along the animated and imported and that the muse. Animations works very well, but does not have the interactivity. ((par exemple si je clique sur le "bouton à la maison", que le site ne s'ouvre pas dans mon navigateur

  I created an interactive navigation along the animated and imported and that the muse.
  Animations works very well, but does not have the interactivity.
  ((par exemple si je clique sur le "bouton à la maison", que le site ne s'ouvre pas dans mon navigateur comme il se doit),)
  Anyone have an idea how I can fix this problem?

  Hello

  As you use the edge with muse file you do not put the full URL.

  Please try the code below.

  Window.Open("..) /.. /arbeiten.html","_top");

  Concerning

  ViveK