Issue of applications, workspaces and users...

Similar Questions

• I have some serious issues update to existing and new to download applications.

  Hello

  I just bought a laptop with w8
  I have some serious issues update to existing and new to download applications.
  When I click to download an app it still works but does not settle anything.
  at this point, I can't click the back (arrow) button to return to the main image of the store
  the windows button works and I can continue to use my computer
  the new application (or the update for an existing one) is not installed.
  Here are some useful points:
  -No installation other than Mc. provided McAfee antivirus preinstalled.
  -computer is not in a proxy connection
  -windows update does not work, when I click it works forever without doing anything
  -J' have tried to run the troubleshooter, but it fixes all the time the same 2 questions and that solves nothing
  -J' I reset the cache to store without change
  -without any logical explanation, some updates and downloads have managed at the beginning. then, when the problem started I have reset the cache and I could download a couple more. now everything is blocked and no solution found on this forum does not work.
  Please help me
  thanx
   
  Original title: problem with store windows

  Hello

  I suggest to run the following command and check to see if it helps.

  To fix Windows Update errors, use Deployment Image Servicing and Management.

  1. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  2 type the following commands. Press ENTER after each command.

  o DISM.exe / Online/Cleanup-image /Scanhealth

  o DISM.exe / Online/Cleanup-image /Restorehealth

  3. close the command prompt, and then run Windows Update again.

• Friends in the Forum, this issue was developed by several users and still no correct answer that actually works. How can I make my pdf files show an oreview rather generic logo Adobe?

  Friends in the Forum, this issue was developed by several users and still no correct answer that actually works. How can I make my pdf files show an oreview rather generic logo Adobe?

  Thanks in advance

  Not possible with Acrobat Reader DC.

• The analysis of the patterns and user data

  Hi there;

  We have an application that we intend to migrate apex environment, but the actual application is such that the next;

  Everyone has its own pattern of data, which allows us to have a dmp functional full exp for all tables in the schema of users.

  So, to bring this matter to the architecture of the apex, it is looks that I need to install the apex to my oracle instance and create (say 10 workspaces if I have 10 data of users to each schema schema) or have a full space of the application work exp and a full import to each schema of data of users;

  Someone has some like this environment?

  What about the practice of bast apex, what would be the optimal scenario of the apex?

  Forward thanks;

  Marcos Ortega

  Hey Marcos.

  Are you sure you want to keep the user/schema configuration because it is now? I don't know the details of your needs, but it seems that you should use EVP instead of a single schema by user. In any case, I'll assume that you want to migrate to the APEX with the current configuration of the user/schema.

  You should know that an APEX application can only have a scheme of analysis. This means that you will need to create a separate application by user. Sounds awful, right? Think of your ease of management: a change in demand means that you will need to update each user's application. In addition, I'd stick to a single workspace since it is perfectly possible to assign several schema to a workspace. A workspace by user is less easy to manage and not necessary in your case.

  Kind regards

  Nick

• RW-00000 Error during database configuration and user node creation

  Hello
  
  Currently, I install R12.1.1, and the environment has two servers - one for the app and the other for the floors of the db.
  When running the Setup Wizard, I get the error RW-00000 error message when configuring the database node.
  < RW-00000: cannot write the following directory. Please check the permission >
  In my view, that the indicated directory is the directory/tmp or/d01/oracle/SID.
  The thing is that both have full rights in all cases.
  Can anyone tell how this problem can be solved?
  
  Another issue is...
  The two levels have users created in servers, oracle and applmgr?
  Or, how users should be created?
  Initially, he complains of users even if users are created as a result.
  
  
  Best regards
  SH
  
  Published by: user121379 on Sep 2, 2011 10:59
  
  Published by: user121379 on Sep 2, 2011 12:30

  The way I created the stage space is that the directory is created under the Application layer and rapidwiz running here.
  Then I'm trying to set the node database information giving host and domain names.

  Run Setup on the node to layer database first and then the application tier node.

  Users are created for applmgr at the Application layer and oracle at the database level.
  Is it OK?

  It's OK.

  Thank you
  Hussein

• Need for application sharing capabilities (user interface).

  I get the needs of the business where we need capacity sharing application at the user interface level.  After the necessary approvals, we need to display an application UI (mainly based on a browser) running on another computer.  We also require the ability to update.

  The parameters can be student/teacher, agent/client and so on.  We much prefer this approach to screen sharing coverage that presents the information security issues, privacy violations and so forth.

  No / volonteent CAA offers this feature?

  Hi Ram,

  I'm not sure what is meant by "application sharing". If it's something like scraping the pixels of a screen and by sending them as video to another, the Flash Player is not capable of that. If you need co-browsing (such as co navigation in a form or a map, which are part of a Flex application), then the mail data can be used to keep multiple clients synchronized via a shared model.

  hope that helps.

  Nigel

• Help. Window opens on the Firefox browser that says Application JavaScript and according to what he says 101. There is an OK bitton. When I click on OK, place just the window again and again.

  Help. Window opens on the Firefox browser that says Application JavaScript and according to what he says 101. There is an OK bitton. When I click on OK, place back the window. Then once again hit OK and box disappears when I move my mouse the same Monte box again. I even called Apple support. They tried things; got me well maybe some ting setbold textin Firefox preferences. It started right after the installation of update of Mac at the close. Any help, please. My browser is completely blocked (obviously) in this loop! [email protected] jason

  Hello

  Please check if this happens in Safe Mode.

  Extensions of the issues

  Troubleshooting Extensions and themes

  Uninstalling the modules

  Uninstalling toolbars

  Safe mode disables the installed Extensionsand themes (appearance) in (Alt + T) Tools > Add-ons. Hardware acceleration is also temporarily disabled - manual setting is Tools > Options > Advanced > general > use hardware acceleration when available. Options > Advanced. All these parameters/additional custom modules can also be individually or collectively disabled/enabled/changed to normal mode of Firefox to check if an extension, theme or hardware acceleration is causing issues.

• How do I remove/delete a workspace and all it's files?

  As a new user of the CVI, I created a number of workspaces (?) in the same folder. How can I determine what files are associated with the workspace who? Is there a way to remove all files associated with a workspace including the workspace?

  It doesn't have a way in CVI to delete Workspaces and all their associated files. You can see what files are associated with a workspace by opening the workspace in CVI or a text editor and looking at the files contained in this text file.

  For you help, I created a codebase uncommented in LabVIEW that will pass through all the files in your workspace of cws file and will invite then delete all files in the workspace.

  There are two things to note about this quick program. ((1) it does not remove the current workspace file (which is not a very hard to add addition) and 2) dependies of working space with long paths are split into several lines in the cws file. It DOES NOT combine these lines and will probably result in an error. Concatinating these lines (if you need it) is a task left to you but should be fairly trivial.

  This program was made in LabVIEW but it is no reason for a python script, or even a few well-designed grep orders could not achieve the same functionality.

  Kind regards

  Steven Zittrower

  Technical sales engineer

  National Instruments

  http://www.NI.com/support

• Account administrator and user, Windows 7 Premium access control problems

  We have a problem with a HP/Compaq Windows 7 Premium machine 4 months old and we cannot allow any request of the UAC.

  An account on the machine is a "Standard user" without password, but when we do something like put to day or what the icon shield it and require permission from the Admin we cannot.  The alert box will appear asking you to Admin password (with no box to type, besides whom there is no account active Admin but maybe only the Super Admin account 'hidden' which is off), but also the 'Yes' button is gray and only 'no' can be clicked.

  Support PC World were unnecessary, saying full install, their stock response.  Tried enabling the 'super administrator' hidden account think it worked once before when I need administrator rights to install the software, but as unable to run CMD prompt as administrator (again because UAC comes into play), I can't seem to do.

  So now stuck with the new machine and messing around on the fighting with the OS: s I thought rightly or wrongly that the activation of the hidden Admin account would do, I'm sure that's what I did before, but I keep hitting the problem guest UAC as described above.  Therefore, the following does not work:

  ______________________________________

  Click Start, type: CMD
  In the results, click on the right button CMD
  Click on "Run as Administrator"
  at the command prompt, type: net user administrator / active: yes

  Log off, and then log on to the administrator account
  Make the appropriate changes to your accounts

  Log on to your account
  Click Start, type: CMD
  In the results, click on the right button CMD
  Click on "Run as Administrator"
  at the command prompt, type: net user administrator / active: No.

  ______________________________________

  I tried to click with the right button on CMD prompt and checking run them as administrator on the drop down menu, but UAC prompt comes up, no luck.  Also tried setting to "Run as Administrator" when raising the properties by right-clicking... same result.

  Also tried cursing at the machine... same result: o

  Any help appreciated because I'm sure that I've done it before, and there is a way to pass the CMD prompt.

  Ah finally solved.

  HP Compaq machines have their own start to use for recovery etc. software (accessible by pressing the ESC key), so I went into the system recovery using the backup utility to make sure that the external hard drive was last week 'missing' files, and then cancelled rather than clicking on the side to supplement a system recovery.

  This gave me the traditional options of safe mode,... networks, prompt etc.  Choose Mode safe mode with command prompt and Super Administrator hidden account was visible as well as the Standard user.  Choose the account super administrator, connected, activated the password protect and define it.

  At the command prompt enter:

  NET user administrator / Active: Yes

  Restarted as Standard and UAC user now works fine.

  It all started because of a need to install Open Office and then down the line a cutting machine, interrupting a Microsoft Backup, which could not be restarted without password Admin and user access control issues as described above.

  Is not to hide the Admin user at all now!

• Provide a list of applications after the user credentials are validated

  Is it possible to display a screen to logon to a user, the user inputs their name of user and password, when the credentials are validated as ok another screen is launched with a choice of one-to-many applications that the user can run?  I'm new on the Blackberry Java development, simple code examples would be appreciated.  Thank you.

  See this Article.

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800639/How_To _...

  If you are new, go through this sticky thread.

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&thread.ID=13264

• How to limit rights to an Application Instance per user?

  This excellent post, I learned that I we can assign a form field to the notion of the right of an Instance of the Application.

  Is it possible to restrict the list of rights to an Application Instance per user?

  I mean, is there a way to show for example all rights for a user and only one or two for user B when the user submitted a request for clearance of a specific Instance of the Application?

  If so, is it possible to model the business logic using only the IOM or should I write my own business logic module for that?

  TIA

  Leo

  Without custom code to set the users it will show for in the catalogue, the OOTB option is based on the membership of the organization.  In the Administration Console system, if you go to all instances of the application, you can see which organizations you have published the application.  The same goes for the rights of this forum, you can also see which organizations law is published on.  It is the only default way to do this.

  -Kevin

• correct the page id and the page id application id and the id of the sensitivity of the other developer then

  Hi all

  I use apex 4.2 on windows World Bank on internet explore

  I followed the following link

  Oracle - button apex to call a page in another application - Stack Overflow

  at the end of the page, solution provider says

  It seems that your application id and the page id resemble developer links for your pages. You can't share a session as well. It could even be your problem: If you want to bind the user to the page of an application, use the ID correct and not the developer.

  what it means?

  How do I Unlike id and the real id of the developer?

  Please guide me because I think I'm also give the URL of developer which I just copy the URL of the web browser.

  Kind regards.

  Maahjoor wrote:

  I use apex 4.2 on windows World Bank on internet explore

  I followed the following link

  Oracle - button apex to call a page in another application - Stack Overflow

  at the end of the page, solution provider says

  It seems that your application id and the page id resemble developer links for your pages. You can't share a session as well. It could even be your problem: If you want to bind the user to the page of an application, use the ID correct and not the developer.

  what it means?

  This means that, following the structure of the URL of the APEX, in the example

  f?p=4000:4150:&APP_SESSION.

  the application ID is 4000, and the page ID is 4150. 4000 is actually the ID of the application that provides the APEX Builder Application development environment, and page 4150 is the definition of the pages it contains. Application between 3000 and 8999 ID are reserved for internal use of the APEX, so any application ID share you will be outside this range.

  How do I Unlike id and the real id of the developer?

  Please guide me because I think I'm also give the URL of developer which I just copy the URL of the web browser.

  There is no such thing as 'developer id' and 'real id '. Developers and end users run applications using the same ID.

  Note that published URL of permanent demand within applications should use alphanumeric calls and page aliases, ID not digital. This allows a fixed URL to provide to end users while allowing developers and administrators flexibility in how applications are deployed and maintained over time.

  If you have any remaining doubts, provide all the details of what you are doing, including the URL that you create.

• Hello. Recently, I buy the suite adobe for students. I also paid for two months. But in my profile it says I have a free plan for testing applications. And I can't get the entire application. How can I solve this?

  Hello. Recently, I buy the suite adobe for students. I also paid for two months. But in my profile it says I have a free plan for testing applications. And I can't get the entire application. How can I solve this?

  Your subscription to cloud shows correctly on your account page?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  If you have more than one email, you will be sure that you use the right Adobe ID?

  .

  If Yes

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  .

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• A question about Application module and bounded taskflows

  Hello

  One of my friends sent me this question that I could not answer. The question is:

  
  

  Your application contains a workflow bounded with four pages.

  The pages are all based on different application modules and the workflow has the property of transaction, the value 'Always Begin new Transaction, and a commit operation is defined as the return of the activity. The user makes a few changes on each page, but a validation failure happens on the links on the third page.

  Which of these scenarios describes the outcome of this situation?

  A. None of the changes on pages undertakes all are cancelled.

  B. pages one and two and four engaged; page three is not validated.

  C. changes to the first two pages are validated; changes on the last two pages are not committed.

  D. it depends on the value that has been set in the property Transaction on each module of the application.

  I suggest the answer is A, but the answer my friend is C.

  What is your suggestions

  Thank you

  You are right.

  The point of transaction is that a couple of operation may be validated or cancelled together.

  If a stubborn workflow starts with a new transaction, when he wishes to complete, he must call a task flow return activity validation or cancellation. They call the underlying commit() or rollback() operations on the associated data control framework, essentially validation or restoring all the data attached to the frame controls.

  
  

  http://www.Oracle.com/technetwork/developer-tools/ADF/learnmore/ADF-task-flow-TRANS-Fund-v1-1-1864319.PDF

• Hello, I've faced the same problem when you come creative cloud in the loaded application tab and nothing appears.

  Hello, I've faced the same problem when you come creative cloud in the loaded application tab and nothing appears.

  Hi Vlad,

  I think you found the turning wheel on the Adobe CC application.

  Please check the help below document:

  Does not open App | Wheels of progress turn continuously

  You can also view the nets below where this issue has been addressed:

  Adobe Creative Cloud / Desktop App / Home Screen: constant spinning wheel

  Creative Cloud Desktop App taped blue spinning wheel after update.

  Thank you

  Yann Arora