RW-00000 Error during database configuration and user node creation

Hello

Currently, I install R12.1.1, and the environment has two servers - one for the app and the other for the floors of the db.
When running the Setup Wizard, I get the error RW-00000 error message when configuring the database node.
< RW-00000: cannot write the following directory. Please check the permission >
In my view, that the indicated directory is the directory/tmp or/d01/oracle/SID.
The thing is that both have full rights in all cases.
Can anyone tell how this problem can be solved?

Another issue is...
The two levels have users created in servers, oracle and applmgr?
Or, how users should be created?
Initially, he complains of users even if users are created as a result.


Best regards
SH

Published by: user121379 on Sep 2, 2011 10:59

Published by: user121379 on Sep 2, 2011 12:30

The way I created the stage space is that the directory is created under the Application layer and rapidwiz running here.
Then I'm trying to set the node database information giving host and domain names.

Run Setup on the node to layer database first and then the application tier node.

Users are created for applmgr at the Application layer and oracle at the database level.
Is it OK?

It's OK.

Thank you
Hussein

Tags: Oracle Applications

Similar Questions

  • Errors during the upgrade and Ininstall of Adobe Reader 10.1.3

    I have problems updating Adobe Reader 10.1.3. The following error is generated: "Fatal error during installation" - error 1603.

    I tried to uninstall 10.1.3 but it crashes with the following error message: "msiexec.exe has encountered a problem and needs to close."

    What are the steps to perform a manual uninstall?

    I must point out that the current version 10.1.3 seems to work very well.

    OS: Windows XP

    Thank you

    Try http://labs.adobe.com/downloads/acrobatcleaner.html

  • Error during the synchronization of users with the users of available utility

    IM using ProvisionUsers.sh to make available to console linux users...


    The process is when extracting an error... the error says error during extraction user by HBR Embedded identity what does this error mean initialized, I don't know what means...

    Everyone?

    This isn't a mistake, it's just a warning message, it occurs most of the time.
    You should probably check the other logs that are generated after running the utility.

    See you soon

    John
    http://John-Goodwin.blogspot.com/

  • Receive 80070026 error during update KB975496 and KB980846

    Hi all...

    I'm running Windows 7 x 64 bit computer and when you run Windows Update I see two critical / important updates are necessary. KB975496 and KB980846. Whenever I run updates, I get error Code 80070026. I can't find that everything about my problems when searching Google.

    Here's what shows the application log:

    Log name: Application

    Source: Windows Error Reporting

    Date: 2010-09-24 07:45:55

    Event ID: 1001

    Task category: no

    Level: Information

    Keywords: Classic

    User: n/a

    Computer: CR3317Dell09.Student.Hermits.org

    Description:

    Bucket of error, type 0

    Name of the event: WindowsUpdateFailure

    Answer: No available

    Cabin ID: 0


    Signature of the problem:

    P1: 7.4.7600.226

    P2: 80070026

    P3: 6E909FEF-E9BD-4F0A-917B-B7875591BA1F

    P4: install

    P5: 101

    P6: succeeded

    P7:

    P8:

    P9:

    P10:


    Attached files:


    These files are available here:



    Symbol of the analysis:

    Recheck for solution: 0

    Report ID: 498aff5c-c7d1-11df-b239-0023ae88ef76

    State: 0

    The event XML:

      

        

        1001

        4

        0

        0 x 80000000000000

        

        6856

        Application

        CR3317Dell09.student.hermits.org

        

      

      

        

        

        0

        WindowsUpdateFailure

        Not available

        0

        7.4.7600.226

        80070026

        6E909FEF-E9BD-4F0A-917B-B7875591BA1F

        Install

        101

        Managed

        

        

        

        

        

        

        

        

        

        

        

        

        

        

        0

        498aff5c-c7d1-11df-B239-0023ae88ef76

        0

      

    Any help is greatly appreciated! :)

    0 X 80070026 0 X 26 = 38 L ERROR_HANDLE_EOF STRSAFE_E_END_OF_FILE =

    I would recommend that you...

    Start a collateral request for assistance free Windows Update: https://support.microsoft.com/oas/default.aspx?gprid=6527

    Support for Windows Update: http://support.microsoft.com/gp/wusupport

  • Errors during the download and installation of Photoshop CC.

    Exit code: 7

    Please see specific errors below for troubleshooting. For example, ERROR: DF024...

    -------------------------------------- Summary --------------------------------------

    -0 fatal Error (s), 5 (s)

    -Payload: AdobeColorEU CC 5.0.0.0 {F6DED2DA-1D20-497E-8810-E745B45DCD28}.

    ERROR: DF024: unable to preserve the original file at "/ Library/Application Support/Adobe/Color/Settings/ExtraSettings/Europe GP 3.csf" (Seq 1)

    -Payload: AdobeColorNA CC 5.0.0.0 {AB955DCF-69CD-4840-B7FB-F318CDD0AE44}.

    ERROR: DF024: unable to preserve the original file at "/ Library/Application Support/Adobe/Color/Settings/recommended/North America general Purpose.csf ' (Seq 1)

    -Payload: AdobeColorPhotoshop CC 5.0.0.0 {5C5D62C9-91C6-415E-857E-9130C0F52C66}.

    ERROR: DF024: unable to preserve the original file at "/ Library/Application Support/Adobe/Color/Profiles/Photoshop4DefaultCMYK.icc" (Seq 1)

    -Payload: AdobeColorVideoProfilesCS CC 5.0.0.0 {CE9B1B00-0421-4701-9698-1C14646D6D94}.

    ERROR: DF024: unable to preserve the original file at "/ Library/Application Support/Adobe/Color/Profiles/VideoHD.icc" (Seq 2)

    -Payload: Adobe Photoshop CC 2015 Core 16.0.0.0 {2614BC86-757D-4293-9E25-E4E16F370A9E}.

    ERROR: DF024: unable to preserve the original file at "/ Library/Application Support/Adobe/HelpCfg/cs_CZ/goURL_lr_photoshop_cz.csv" (seq. 7197)

    -------------------------------------------------------------------------------------

    Hello

    Please see: -.

    Errors ' Exit Code: 6, "" Exit Code: 7 "|"» CC, CS6, CS5.5

    Also try:-custom CS5 install Exit Code 7

  • Hello, I downloaded the free trial of 30 days, but now he says there was an error during the download, and they can be downloaded. Any help would be appreciated I need to use the software for work Uni due tomorrow. Windows 8, Google Chrome. Photos

    FDF

    Make sure that you have enabled cookies and clear your cache.  If he continues to not try to use a different browser.

  • tcObjectNotFoundException error during the configuration via the API of the IOM

    Hello

    I'm trying to provide resources using the client API IOM. I use the following code which generates the exception mentioned after the code snippet:

    *******************************Code*******************************

    java.util.Hashtable env = new java.util.Hashtable ();

    env.put (oracle.iam.platform.OIMClient.JAVA_NAMING_FACTORY_INITIAL,

    oimInitialContextFactory);

    env.put (oracle.iam.platform.OIMClient.JAVA_NAMING_PROVIDER_URL, oimURL);

    oracle.iam.platform.OIMClient client = new oracle.iam.platform.OIMClient (env);

    Thor.API.Operations.tcUserOperationsIntf userIntf = (Thor.API.Operations.tcUserOperationsIntf.class) client.getService;

    Thor.API.Operations.tcObjectOperationsIntf objIntf = (Thor.API.Operations.tcObjectOperationsIntf.class) client.getService;

    Thor.API.Operations.tcFormInstanceOperationsIntf formIntf = (Thor.API.Operations.tcFormInstanceOperationsIntf.class) client.getService;

    Thor.API.Operations.tcProvisioningOperationsIntf provIntf = (Thor.API.Operations.tcProvisioningOperationsIntf.class) client.getService;

    Thor.API.Operations.tcUserOperationsIntf userOper = (Thor.API.Operations.tcUserOperationsIntf.class) client.getService;

    java.util.Hashtable mhSearchCriteria = new java.util.Hashtable ();

    Hashtable ObjectHash = new Hashtable();

    objectHash.put ("Objects.Name", "ITAX_GTC");

    Data com.thortech.xl.vo.ResourceData = userIntf.provisionResource (Long.parseLong (userId), objectKey);

    long userObjectInstanceKey = Long.parseLong (data.getOiuKey ());

    long objectInstanceKey = Long.parseLong (data.getObiKey ());

    Hashtable InputHash = new Hashtable();

    Fill out the entry below with data from object

    for (int b = 3; b < row.length; b ++)

    {

    inputHash.put (header [b], [b] row);

    }

    Sets the data object

    formIntf.setProcessFormData (objectInstanceKey, inputHash);

    *********************************************************************************************

    Thor.API.Exceptions.tcObjectNotFoundException

    at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:234)

    at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:348)

    at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)

    at Thor.API.Operations.tcUserOperationsIntf_e9jcxp_tcUserOperationsIntfRemoteImpl_1035_WLStub.revokeObjectx (unknown Source)

    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

    at java.lang.reflect.Method.invoke(Method.java:597)

    at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:85)

    to $Proxy2.revokeObjectx (Unknown Source)

    at Thor.API.Operations.tcUserOperationsIntfDelegate.revokeObject (unknown Source)

    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

    at java.lang.reflect.Method.invoke(Method.java:597)

    to Thor.API.Base.SecurityInvocationHandler$ 1.run(SecurityInvocationHandler.java:68)

    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

    at weblogic.security.Security.runAs(Security.java:41)

    at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs (weblogicLoginSession.java:52)

    at Thor.API.Base.SecurityInvocationHandler.invoke (SecurityInvocationHandler.java:79)

    to $Proxy3.revokeObject (Unknown Source)

    at com.infotech.tra.organization.RoleAssignment.ProvisionResources(RoleAssignment.java:1013)

    at com.infotech.tra.organization.RoleAssignment.main(RoleAssignment.java:48)

    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

    at java.lang.reflect.Method.invoke(Method.java:597)

    at org.eclipse.jdt.internal.jarinjarloader.JarRsrcLoader.main(JarRsrcLoader.java:56)

    Caused by: Thor.API.Exceptions.tcObjectNotFoundException

    at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.revokeObject(tcUserOperationsBean.java:3184)

    at Thor.API.Operations.tcUserOperationsIntfEJB.revokeObjectx (unknown Source)

    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

    at java.lang.reflect.Method.invoke(Method.java:597)

    at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)

    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)

    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)

    at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)

    at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)

    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)

    at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37)

    at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)

    at com.bea.core.repackaged.springframework.jee.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:50)

    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)

    at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)

    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)

    at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)

    at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)

    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)

    at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)

    to $Proxy344.revokeObjectx (Unknown Source)

    at Thor.API.Operations.tcUserOperationsIntf_e9jcxp_tcUserOperationsIntfRemoteImpl.__WL_invoke (unknown Source)

    at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:40)

    at Thor.API.Operations.tcUserOperationsIntf_e9jcxp_tcUserOperationsIntfRemoteImpl.revokeObjectx (unknown Source)

    at Thor.API.Operations.tcUserOperationsIntf_e9jcxp_tcUserOperationsIntfRemoteImpl_WLSkel.invoke (unknown Source)

    at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:667)

    at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:230)

    to weblogic.rmi.internal.BasicServerRef$ 1.run(BasicServerRef.java:522)

    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)

    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)

    at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:518)

    at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)

    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)

    at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)

    Add the line before retrieving the key of the object:

    set.goToRow (0); assuming that one record is returned in the result

  • HP Photosmart 6280 all-in-one: HP Photosmart C6280 all-in-One error - wstub 197370' «Fatal error during Installation»

    Hello

    I have a problem with my HP 6280 All in One Printer. There are a few problems and it's really annoying, I wonder if anyone can prove useful please?

    I uninstalled the software and drivers for the Photosmart series C6200 of the site, and when re installation, the software starts uninstalling itself and gives the following message:

    "Error - wstub 197370'

    "Fatal error during Installation"

    And then starts to uninstall the entire software package and then request to restart to uninstall complete.

    Once restarted, the whole scenario goes in a loop that is the uninstall process? Very confusing indeed and have never experienced this kind of problem before!

    All advice is appreciated.

    Best regards, K

    Hi @k_san7,

    Welcome to the HP Support forum.

    I understand that you found "error - wstub 197370' and"Fatal error during Installation"messages when you try to install the software and drivers for the HP Photosmart C6280 all-in-One printer on your Windows PC 7." I would like to help with that.

    I searched our database for "error - wstub 197370' and did not find anything related, but I found some documents related to"Fatal error during Installation"errors." Here is a document that can help - Displays A 'fatal error' during HP Software Installation (Windows).

    I'll try to uninstall the software and printer drivers. Click here if you need help with uninstalling.

    Then I would erase the temp directory.

    1. tap folder in the field "search programs and files".

    2 Select all the files in this folder, and then press the delete key to remove.

    Once removed to close all windows and restart the computer.

    When the computer restarts, download and install the latest version of the software and the printer drivers.

    Here's a direct link to the software and drivers for Windows 7 - HP Photosmart series C6200 full feature software and driversprinter.

    Please let me know if that solves the problem, or if you need assistance.

    In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

    Thank you!

  • Database configuration failed on CentOs 6.1

    After the successful installation of Oracle 11 g XE on CentOs 6.1, I tried to configure using 'configure /etc/init.d/oracle-xe. I configured the ports, password. From Oracle Net Listener passed, but the configuration of the database... step failed. Here are the config/log logs:

    [cloneDBCreation.log | http://pastebin.com/HUuWYxxs]
    [CloneRmanRestore.log | http://pastebin.com/6MxnvPXP]
    [postDBCreation.log | http://pastebin.com/YdicyG5r]
    [postScripts.log | http://pastebin.com/THfgEdbh]

    I don't really know of these scripts where could be the problem. Thanks for the replies.

    my name is sanjunbLin and sanjuronbLin ping output "ping: host unknown sanjuronbLin.
    and what I have in/etc/hosts:
    127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
    : 1 localhost localhost.localdomain localhost6 localhost6.localdomain6

    If something wrong with that? What should I do? THX.

    Yes, your host name is not available, not even locally.
    You it could add to the list of 127.0.0.1 assign your return address of local loop, but this would restrict access to your machine only. If you want to access your database from another computer, you must have a static IP address for your machine. This can be affected by a static DHCP rule or by giving your network card a fixed IP address. In both cases, we must add that the IP to your/etc/hosts and give it the name of your machine, so it can be resolved.
    By example, if your machine has an internal IP 192.168.1.123, your/etc/hosts should look like the following:

    127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
192.168.1.123 sanjunbLin

    After you add this kind of entry, you should be able to restart your database configuration and to go further. If no other requirements are not present, it will end successfully.

    -Udo

  • DMA2200 not will impact configuration and reports a configuration error

    I used the DMA2200 successfully until recently when he lost contact with my Windows 7 PC. The PC can see the DMA2200 on the network, but after 8-digit code, I always get a configuration error and a new user (Mcx1). I use AVG 9.0.819. This does not have a firewall, so I use the built in Windows 7 firewall. This deactivation makes no difference. My PC has been upgraded to Vista successfully little after that Windows 7 is out. I used the DMA2200 since then OK but maybe never implemented since the upgrade of the operating system. I checked for DMA2200 updated firmware, but it signals that I am up to date. My connection is an administrator. I keep everything where I can.

    The Windows logs I get (see below).

    Can anyone help here please?

    Kind regards

    VIC

    Journal entries: -.

    Journal name: Media Center
    Source: Microsoft-Windows Media Center Extender
    Date: 30/05/2010 14:00:58
    Event ID: 545
    Task category: Configuration
    Level: error
    Keywords:
    User: Lojoka\Vic
    Computer: Lojoka
    Description:
    Media Center Extender Setup cannot create an account for the extender with ID: uuid:8D91C7B0 - 99FD-42 D 1-A1A5-79AE293B37ED.

    Error: Only a part of a query ReadProcessMemory or WriteProcessMemory was made.
    The event XML:
    http://schemas.Microsoft.com/win/2004/08/events/event">
     
       
        545
        0
        2
        4
        0
        0 x 8000000000000000
       
        6591
       
       
        Media Center
        Lojoka
       
     
     
        UUID:8D91C7B0 - 99FD-42 D 1-A1A5-79AE293B37ED
        -2147024597
     

    Log name: Application
    Source: Microsoft-Windows-user profiles Service
    Date: 30/05/2010 14:00:57
    Event ID: 1533
    Task category: no
    Level: error
    Keywords:
    User: Lojoka\Vic
    Computer: Lojoka
    Description:
    Windows cannot remove the profile directory C:\Users\Mcx1-LOJOKA.Lojoka.005. This error can be caused by files in this directory that is used by another program.

    DETAIL - the directory is not empty.

    The event XML:
    http://schemas.Microsoft.com/win/2004/08/events/event">
     
       
        1533
        0
        2
        0
        0
        0 x 8000000000000000
       
        79970
       
       
        Application
        Lojoka
       
     
     
        C:\Users\Mcx1-LOJOKA.Lojoka.005
        The directory is not empty.

     

    Log name: Application
    Source: Microsoft-Windows-user profiles Service
    Date: 30/05/2010 14:00:57
    Event ID: 1511
    Task category: no
    Level: error
    Keywords:
    User: S-1-5-21-2753804710-3089563717-4261566473-1045
    Computer: Lojoka
    Description:
    Windows cannot find the local profile and connects you with a temporary profile. Changes to this profile will be lost when you log out.
    The event XML:
    http://schemas.Microsoft.com/win/2004/08/events/event">
     
       
        1511
        0
        2
        0
        0
        0 x 8000000000000000
       
        79971
       
       
        Application
        Lojoka
       
     
     
     

    Solved! The problem was a software the Bank invites you to install. It's report. It has never given any other issue. I've uninstalled it during my investigations and the Extender (DMA2200) has finally set up OK. After you have reinstalled the report still seems to work OK.

    I hope this helps someone!

    VIC

  • Creation of database of cluster requires default listener configured and executed in grid House Infrastructure.

    Hello!

    I created the new database with DBSA in configuration RAC (NŒUD 2)
    Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit

    Release of Red Hat Enterprise Linux Server 5.8

    Requirements has successfully passed:

    [oracle@db1-mng ~] $ cluvfy stage - pre dbcfg - n mng - db1, db2 - mng - d
    /U01/app/Oracle/product/11.2.0.3/dbhome_1

    Perform preliminary checks for database configuration

    Check accessibility of node...

    Accessibility of node check from node "db1 - mng.

    Check the user equivalence...

    User equivalence check passed for user 'oracle '.

    Verify node connectivity...

    Checking hosts config file...

    The hosts config file verification successful

    Check: connectivity interface node 'bondeth0 '.

    Connectivity node passed to the interface 'bondeth0 '.

    Check the TCP connectivity to subnet "10.116.176.196."

    Check: connectivity interface node 'bondib0 '.

    Connectivity to the node passed to the interface 'bondib0 '.

    Check the TCP connectivity to subnet "192.168.18.10."

    Checking consistency of subnet mask...

    Consistency of subnet mask check passed for subnet
    '10.116.176.196 '.

    Consistency of subnet mask check passed for subnet
    '192.168.18.10 '.

    Verification of consistency for the last subnet mask.

    Check the passed node connectivity

    Checking for multicast communication...

    Check "10.116.176.196" for multicast communication subnet with
    Multicast group '230.0.1.0 '...

    Subnet check "10.116.176.196" for multicast communication with
    from '230.0.1.0' multicast group

    Check "192.168.18.10" for multicast communication subnet with
    Multicast group '230.0.1.0 '...

    Subnet check "192.168.18.10" for multicast communication with
    from '230.0.1.0' multicast group

    Control of transmitted multicast communication.

    Total memory check passed

    Check the available memory

    Checking space last swap

    Check the disk space free past for
    'db1-mng:/u01/app/oracle/product/11.2.0.3/dbhome_1 '.

    Check the disk space free past for
    'db2-mng:/u01/app/oracle/product/11.2.0.3/dbhome_1 '.

    Free disk space for audit "db1 - mng: / tmp '.

    Free disk space for audit "db2 - mng: / tmp '.

    Check for multiple users with the value of the UID 1000 ago

    Check for existence of user for 'oracle '.

    Existence of group check passed for "oinstall".

    Existence group check passed for "dba".

    Membership check for user 'oracle' in group 'oinstall' [as principal]
    past

    Membership to check for 'oracle' user group 'dba' spent

    Run control the level of the past

    Hard deadline check passed for "maximum open file."
    "descriptors of '.

    Verification of limits soft for "maximum open file."
    "descriptors of '.

    Hard limits check passed for "maximum user process.

    The soft limits check passed for "maximum user process.

    The system architecture check past

    Check the version of the kernel spent

    Kernel parameter check passed for "semmsl.

    Kernel parameter check passed for "semmns.

    Kernel parameter check passed for "semopm.

    Kernel parameter check passed for "semmni.

    Kernel parameter check passed for "shmmax.

    Kernel parameter check passed for "shmmni(5)."

    Kernel parameter check passed for "shmall.

    Kernel parameter check passed for 'file-max.

    Kernel parameter check passed for "ip_local_port_range.

    Kernel parameter check passed for "rmem_default."

    Kernel parameter check passed for "rmem_max.

    Kernel parameter check passed for "wmem_default."

    Kernel parameter check passed for "wmem_max.

    Kernel parameter check passed for "aio-max-nr.

    Existence of package check passed to 'make it '.

    Existence of package check for "binutils".

    Existence of package check passed for "gcc (x86_64).

    Existence of package check for "libaio (x86_64).

    Existence of package check for 'glibc (x86_64).

    Existence of package check passed for
    "compat-libstdc ++-33 (x86_64).

    Existence of package check passed for
    "elfutils-libelf (x86_64).

    Existence of package check passed for "elfutils-libelf-devel '.

    Existence of package check passed for 'glibc-common ".

    Existence of package check for 'glibc-devel (x86_64).

    Existence of package check for ' glibc headers.

    Existence of package check passed for "gcc - c++ (x86_64).

    Existence of package check for "libaio-devel (x86_64).

    Existence of package check for 'libgcc (x86_64).

    Existence of package check for 'libstdc ++ (x86_64).

    Existence of package check passed for
    'libstdc ++ - devel (x86_64).

    Existence of package check for "sysstat".

    Existence of package check for 'ksh '.

    Check for multiple users with the value of the UID 0 passes

    ID of current group check passed

    Audit of departure for the coherence of the primary root group
    user

    Check the consistency of the primary group of the user root past

    CRS checking the integrity...

    Consistency of version Clusterware spent

    Checking the integrity of the src passed

    Checking node application existence...

    Verification of the existence of the node VIP application (required)

    VIP application node check past

    Verification of the existence of the application of NETWORK node (required)

    Application node passed control NETWORK

    Verify the existence of GSD (optional) application node

    Application node GSD is in offline mode on nodes "mng - db1, db2 - mng"

    Verification of the existence of the application of ONS node (optional)

    ONS node application check past

    Check the consistency of zone past

    Check beforehand for the database configuration was successful.

    ------------------------------------------

    [oracle@db1-mng ~] $ ps - aef | grep lsnr

    10435 1 0 2014 Oracle?        00:09:57
    /U01/app/Oracle/product/11.2.0.3/dbhome_1/bin/tnslsnr LISTENER
    -inherit

    10447 1 0 2014 Oracle?        00:14:10
    /U01/app/11.2.0.3/grid/bin/tnslsnr LISTENER_SCAN1-inherit

    Oracle 58226 74449 14:00 0 pts/0 00:00:00 grep
    LSNR

    ------------------------------------------

    [oracle@db1-mng ~] $ lsnrctl LISTENER status

    LSNRCTL for Linux: Version 11.2.0.3.0 - Production on 16 April 2015
    11:56:48

    Connection to
    (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = LISTENER)))

    STATUS of the LISTENER

    Alias LISTENER

    Settings for the listen port file
    /U01/app/Oracle/product/11.2.0.3/dbhome_1/network/admin/listener.ora

    Log file of listener
    /U01/app/Oracle/product/11.2.0.3/dbhome_1/log/diag/tnslsnr/db1-MNG/listener/alert/log.XML

    Listen to endpoint points summary...

    (DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = LISTENER)))

    (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=10.116.176.129) (PORT = 1521)))

    (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=10.116.176.100) (PORT = 1521)))

    Summary of services...

    Service '+ ASM' a 1 instance (s).

    Instance '+ ASM1' READY State, has 1 operation for this
    service...

    Service 'COM' has 1 instance (s).

    Instance "COM1", State LOAN, has 1 operation for this
    service...

    Service 'COMXDB' has 1 instance (s).

    Instance "COM1", State LOAN, has 1 operation for this
    service...

    'PM' service has 1 instance (s).

    Instance "PM1" READY State, has 1 operation for this
    service...

    Service 'PMXDB' has 1 instance (s).

    Instance "PM1" READY State, has 1 operation for this
    service...

    Service 'TEST' has 1 instance (s).

    Instance "TEST1", State LOAN, has 1 operation for this
    service...

    Service 'TESTXDB' has 1 instance (s).

    Instance "TEST1", State LOAN, has 1 operation for this
    service...

    The command completed successfully

    ----------------------------

    [oracle@db1-mng ~] $ lsnrctl status LISTENER_SCAN1

    LSNRCTL for Linux: Version 11.2.0.3.0 - Production on 16 April 2015
    14:12:13

    Connection to
    (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = LISTENER_SCAN1)))

    STATUS of the LISTENER

    Alias LISTENER_SCAN1

    Settings for the listen port file
    /U01/app/11.2.0.3/grid/network/admin/listener.ora

    Log file of listener
    /U01/app/11.2.0.3/grid/log/diag/tnslsnr/db1-MNG/listener_scan1/alert/log.XML

    Listen to endpoint points summary...

    (DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = LISTENER_SCAN1)))

    (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=10.116.176.197) (PORT = 1521)))

    Summary of services...

    Service 'COM' has 2 occurrences.

    Instance "COM1", State LOAN, has 1 operation for this
    service...

    Instance "COM2", State LOAN, has 1 operation for this
    service...

    Service 'COMXDB' has 2 occurrences.

    Instance "COM1", State LOAN, has 1 operation for this
    service...

    Instance "COM2", State LOAN, has 1 operation for this
    service...

    'PM' service has 2 occurrences.

    Instance "PM1" READY State, has 1 operation for this
    service...

    Instance "PM2", State LOAN, has 1 operation for this
    service...

    Service 'PMXDB' has 2 occurrences.

    Instance "PM1" READY State, has 1 operation for this
    service...

    Instance "PM2", State LOAN, has 1 operation for this
    service...

    Service 'TEST' has 2 occurrences.

    Instance "TEST1", State LOAN, has 1 operation for this
    service...

    Instance "TEST2", State LOAN, has 1 operation for this
    service...

    Service 'TESTXDB' has 2 occurrences.

    Instance "TEST1", State LOAN, has 1 operation for this
    service...

    Instance "TEST2", State LOAN, has 1 operation for this
    service...

    The command completed successfully

    ------------------------

    Also successful on the second node db2 - mng to LISTENER_SCAN2, LISTENER_SCAN3.

    When I try to run the command "dbca responsefile - /home/oracle/PR/PRN.rsp-silent ' displays an error:

    Creation of database of cluster requires the default listening port configured and
    currents of the Home Network Infrastructure. Use NETCA in grid Infrastructure - home
    "/ u01/app/11.2.0.3/grid" to set up a front listening port
    instance.

    RAC-database now works in production. Manipulation of the Junk listener.

    How can I get around the error?

    In particular all databases have been created in the same way, the truth, about a year ago.

    Thank you, Thomas! I chose the first method) OK

  • Printer does not work on the Windows XP computer, get the error message like "an error occurred during port configuration. This operation is not supported.

    Original title: 1. printer stopped communicating with the computer. 2 port - associated configuration error?

    I have a big problem. All of a sudden my printer - AIO Photo964 said he cannot communicate with my computer. The printer works fine. I tried switching cables USB, all the trouble shooting suggestions, etc. etc. Nothing works and it makes no sense. I can't print anything. I thought it would be that I installed a Seagate external hard drive backup, then I uninstalled the program - no help. ITunes installed recently, because she had changed the printer default, changed back - no help. The USB cable is not tight in the printer (or both cables, I tried), but AFAIK it's not new (?) And when I try to configure the port, I get the error message "an error occurred during port configuration. This operation is not supported"I have no idea what it means.  Can someone help me with this? I have to return a new printer? The USB port on the printer is repairable if this is the problem? How will I know? Who would do that?

    Thanks, I'd appreciate any help.

    It is always useful to have the complete error message without paraphrase.

    It also helps to identify the version of Windows you have, including service pack.

    And it helps to give the manufacturer of the printer in addition to the model.  In your case, I guess you have a Dell printer.  I know that some Dell printers are rebadged Lexmarks, but I don't know if it's a.

    Why you try to configure the USB port?  It cannot be configured - you've discovered.  It's normal.

    It's quite strange that an iTunes installation would have had something to do with the printers.  What printer was made by default after installing iTunes?

    You say you have tried another USB cable.  Have you tried using a different USB port on the computer? Have you checked in the Device Manager (start > run > devmgmt.msc > OK) to see if there is all the warning icons in the category "controllers of Bus USB?

    I suggest you uninstall the printer software and driver completely and reinstall by following the directions in Its first Article.

    Don't skip step 4.  After step 4 and step 5, follow these steps:

    Important: If you have a Lexmark printer, skip the following

    Open a command prompt window (start > run > cmd > OK)
    type the following in the black command prompt window, and then press ENTER after each line

    net stop spooler
    dependent on the spooler of sc config = RPCSS
    net start spooler
    output

    Note that there is no space before the = and there is a space after it.

    The Windows XP driver for the Dell Photo AIO 964 printer is here--> http://www.dell.com/support/drivers/us/en/04/DriverDetails/DriverFileFormats/Product/dell-964?DriverId=R113115&FileId=2731111743&urlProductCode=False

  • error during the installation of SP3 for windows xp-"cannot read or write to database"

    I have windows xp and when I try to install sp3 I get a message saying "cannot read or write from database" and stops the installation.

    How long the machine was not installed SP3?
    (It could be infested/infected/etc.)

    In any case, what I suggest is to prepare the machine for the update...

    Chancing some repetative tasks... Maybe just do the following:

    Search for malware:

    Download, install, execute, update and perform analyses complete system with the two following applications:

    Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

    Search online with eSet Online Scanner.

    Do a house cleaning and the dust of this hard drive:

    You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

    Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

    If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
    http://www3.TELUS.NET/dandemar/spack.htm
    (Especially of interest here - #4)
    (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

    You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

    How to use disk cleanup
    http://support.Microsoft.com/kb/310312

    You can disable hibernation if it is enabled and you do not...

    When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

    -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
    -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
    -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

    You can control the amount of space your system restore can use...

    1. Click Start, right click my computer and then click Properties.
    2. click on the System Restore tab.
    3. highlight one of your readers (or C: If you only) and click on the button "settings".
    4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
    5. click on OK. Then click OK again.

    You can control the amount of space used may or may not temporary Internet files...

    Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

    -Open a copy of Microsoft Internet Explorer.
    -Select TOOLS - Internet Options.
    -On the general tab in the section 'Temporary Internet files', follow these steps:
    -Click on 'Delete the Cookies' (click OK)
    -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
    -Click OK.
    -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
    -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

    You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

    CCleaner (free!)
    http://www.CCleaner.com/
    (just disk cleanup - do not play with the part of the registry for the moment)

    Other ways to free up space...

    SequoiaView
    http://www.win.Tue.nl/SequoiaView/

    JDiskReport
    http://www.jgoodies.com/freeware/JDiskReport/index.html

    Those who can help you discover visually where all space is used. Then, you can determine what to do.

    After that - you want to check any physical errors and fix everything for efficient access"

    CHKDSK
    How to scan your disks for errors* will take time and a reboot.

    Defragment
    How to defragment your hard drives* will take time

    Cleaning the components of update on your Windows XP computer

    Download and run the MSRT tool manually:
    http://www.Microsoft.com/security/malwareremove/default.mspx
    (Ignore the details and download the tool to download and save to your desktop, run it.)

    Reset.

    Download/install the latest program Windows installation (for your operating system):
    (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
    (Download and save it to your desktop, run it.)

    Reset.

    and...

    Download the latest version of Windows Update (x 86) agent here:
    http://go.Microsoft.com/fwlink/?LinkId=91237
    ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

    Close all Internet Explorer Windows and other applications.

    AutoScan--> RUN and type:
    %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
    --> Click OK.

    (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

    Reset.

    Now reset your Windows with this FixIt components update (you * SHOULD * use the aggressive version):
    How to reset the Windows Update components?

    Reset.

    Download here all the SP3 Setup file: Windows XP Service Pack 3 Package of Network Installation for developers and information technology professionals and save it to the Office of the administrator of the user account on the computer in question.

    Reset.

    Double-click the installation file downloaded in step above and follow the instructions.

  • I have an Officejet 6500 E709n fatal error on the configuration of the product during the installation

    I am running Windows 7-64. Everything installs fine until what happens to "product configuration" and it sets it running its lines running for 5 to 10 minutes then I get «fatal error during installation» I had to uninstall and reinstall the latest version of the software installation and each step as "Installation HP Win 7 error" suggested, but no help. During installation I stopped Norton and Webroot to run interference for them, either.

    So... Yesterday, I ran the s/w "HP Update" which has successfully installed when I installed every piece of software individually.  He identified 3 updates, including some critical fixes for compatibility s/w HP with Windows 7 (issues around communications lost with the device, etc.).

    Interestingly, when updates completed, "Registration of the device" page was displayed, & the Solution Center s/w now works.

    No restoration of the system not required.  No BONES no issues on my end... only the compatibility issues Windows 7 on the end of HP, corrections for which are not apparently included in the V14 s/w downloaded from your site.

    Bottom line, I now have a functional configuration.

  • STOP: c0000221 {Bad Image Checksum}. The image rpcrt.dll is possibly corrupt and recovery XP says error during the extraction process. Details of error: path not found___

    My friend turned on their laptop packard Bell recently and had the following problem. Windows XP screen loads but is then followed by a blue screen that says STOP: c0000221 {Bad Image Checksum}. The image rpcrt.dll is possibly corrupt. The header checksum does not match the checksum calculated.

    I can't the laptop to go further. I have accessed the Microsoft recovery Panel and try a non-destructive recovery as there are some precious photos that need backup. However, when you select 'no profile' to begin the recovery, I get the message:

    Error during the extraction process. Details of error: path not found

    I'm a bit of a novice when it comes to this sort of thing, but if someone can provide step by step help giving rise to lose photos, I'd be willing to give it a try. I also have XP Home Edition disk that came with the laptop but has never been opened. Any help would be appreciated. Thank you

    You hear your message said something about rpcrt4.dll?  It is important to relay the exact message you see.

    Please provide additional information on your system:

    What is your system brand and model?

    What is your Version of XP and the Service Pack?

    Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..

    The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

    The afflicted system has a CD/DVD drive work?

    You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

    You use some CD to access this Panel of Microsoft recovery where this "no profile" option is?  I don't know what all this means if it isn't some CD shipped with your system, in which case, I would use it for a coaster instead of something to fix your system.

    If the c:\windows\system32\rpcrt4.dll file is missing or afflicted, you do not start in the last good known Configuration.

    You also will not start in any kind of Mode safe no more.

    Even if you could boot mode safe, you would find that sfc/scannow does not work in Mode without failure in all cases (never).  If you try it, you'll see a message like this:

    Windows file protection could not initiate a scan of protected system files.

    The specific error code is 0x000006ba [the RPC server is unavailable.].

    Failed to start the RPC mode server safe either.

    I can't recreate your error exactly, but it is easy to replace the rpcrt4.dll file.  Looks like you have a working CD drive, so put yourself a Hiren boot CD and when you started on this, you can copy your precious files to a USB device for safety.

    There should be a backup copy of rpcrt4.dll already on your system, here or here:

    c:\Windows\System32\dllcache

    c:\windows\ServicePackFiles\i386

    You need to rename or replace the rpcrt4.dll file which is in c:\windows\system32 and replace it with one you will find the backup copies.

    There should be a backup copy of rpcrt4.dll already on your system, here or here:

    c:\Windows\System32\dllcache

    c:\windows\ServicePackFiles\i386

    When you get the Hiren's CD's, you can use to replace the missing or suspicious file.  If you need help with that, first get the Hiren's boot CD made and start over, then we can continue.

    Do you have a Hiren BootCD you can download here:

    http://www.hirensbootcd.NET/

    On the left, click on download, scroll down, choose the latest version, the download link is a little hard to see.  It is at the bottom of the page, above the drop for older versions and looks like this (click this component to download the ZIP file):

    Direct HTTP mirror + Torrent, Torrent Magnet

    Click the "Live HTTP Mirror" link to start the download and save the ZIP file on your desktop of somewhere that you can remember.

    The ZIP file is large, so the download will take probably some time to complete.  Then unzip the download to extract the Hirens.BootCD.ISO file that will be used to create your new bootable CD.

    Create a bootable CD. ISO file is not the same as simply copying the. File ISO onto a blank CD.  You must use software that includes how to burn a. ISO to a CD to create a bootable CD.

    File ZIP the Hiren is the file BurnToCD.cmd that you can double-click to launch it.  The BurnToCD.cmd will use the file BurnCDCC.exe to burn the. ISO file onto a blank CD using your existing CD burner.  You can also use your own burning software as long as your software is able to create a bootable CD. ISO file.  More modern burning programs can create a bootable CD. ISO image.  Create a CD from an ISO image bootable is not the same as just the file on a CD burning.

    If you need a simple and CD burning, this is a free software popular software:

    http://www.ImgBurn.com/

    Here are some instructions for ImgBurn:

    http://Forum.ImgBurn.com/index.php?showtopic=61

    It would be a good idea to test your new bootable CD on a computer running.

    You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.

    These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

    When starting on the Hiren's CD, you will see a menu of options.  Choose Mini XP.  It will appear while Windows is loading and you will be presented with a desktop computer that has the look and feel of the interface of Windows Explorer, you are already accustomed to using.

    Using the Mini XP, you can access Internet, maneuvering around your system, search for files, copy files, replace the files and run the scans for malware, edit the text files (like the c:\boot.ini) etc.

    There are dozens of free and useful tools included in the CD that can be used to repair your system or copy your important personal files on another device (like a USB device or an external drive) in the case where you just give up and decide to reinstall your XP (I hope that you will not make this decision)

    Do, or do not. There is no test.

    I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

Maybe you are looking for