Issue of base on the development and deployment on a remote application server

Similar Questions

• Video tutorial on Installation and Configuration Forms11gr2 (development and deployment)

  Dear Exparts

  Nice day.

  I'm going to install and configure (reports, webutil etc..) Oracle Forms11gR2 (11.1.2.2) for development and deployment.

  I want to make everything fine. So, before you start I want see tutorial for all this work).

  Can someone help me? (Team Viewer also available on request.) Video tutorial is the first choice.

  Thanks for your time.

  Ask2Learn

  Asked to know wrote:

  Thanks for the link.

  Can you please guide on the development and deployment?

  No patch needed/mendetory for the 64-bit version?

  Ask2Learn

  Hello Ask2Learn,

  Mode of development is fear that the characteristics of the development environment and mode of deployment is for most of the features of the production environment.

  Select any type and click Next and you will see the list. Web search for each components for more information.

  A few mandatory path for 64-bit according to the version of the OS.

  Please check support.oracle.com

  See also the list bit.

  

• I can't reach some websites with any browser. I get the message ERR_CONNECTION_REFUSED. If I boot in safe mode I don't have the issue. I tried the reset and repair of everything. Help, please

  I can't reach some websites with any browser. I get the message ERR_CONNECTION_REFUSED. If I boot in safe mode I don't have the issue. I tried the reset and repair of everything. Help, please

  Try to run this program in your usual account, then copy and paste the result in a response. The program was created by Etresoft, a regular contributor.  Use please copy and paste the screenshots can be difficult to read. On the screen with the Options, please open Options and tick the boxes in the bottom 2 before the race. Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste into a response. This will show what is running on your computer. No personal information is shown.

  Etrecheck - Information System

• Config of basis for the 2nd and 3rd of the WLC?

  I saw the discussion about the configuration of the failover on of the WLC. I think I have a pretty good understanding of what is supposed to happen here. But what is really clear is the config of base on the 2nd and 3rd in WLC. They need to be configured exactly like the first, with the exception of the unique fields such as host name and ip addresses, interface and such? Usually people take the config of the first and do a "Find and replace" to fix the config for subsequent controllers? I will add 2 more to my controller in the near future and try to have a better understanding of the process until I have to implement. Thank you!

  You are right in the config WLC - unique IP/hostname info and everything else the same. There is usually not a lot of changes of configuration to do on the additional WLC, the few times that I did I have manually configured things or used WCS. Configure additional WLC being part of the same group of mobility and/or hardcode primary, secondary & tertiary controllers AP for failover.

  HTH

• Best practices to develop and test AIR iOS multitouch applications

  I plan to change our practice of XCode/Objective C iPhone development in the AIR to take advantage of a larger pool of talent in the House. The biggest concern I have right now tests the functionality multitouch - the prospect of having to make the incremental generation, the sizing and deployment just to test and refine aspects multitouch of our projects is daunting, if not downright depressing.

  What tools / services or techniques have been developed to facilitate what is without a doubt one of the most frequent problems developing for multitouch iOS using a development based on Office AIR environment?

  @tomaugerdotcom

  Something like this might help: https://testflightapp.com/

  Concevably, you could roll your own service internal if what an individual does not suit you. (I have no knowledge about how they do it, but should not be difficult to understand since the rules binding Apple would only a few possibilities).

  USB app install and debugging is not supported on iOS. You must use wireless.

  Another option specifically for multi-touch dev/test, is to use an Android device.

• How to set the Date and time on a remote target in Measurement & Automation Explorer (MAX)?

  Hello

  I'm trying to follow the steps described in the following link:

  How to set the Date and time on a remote target in Measurement & Automation Explorer (MAX)?

  It is said

  The software on the target currently supports only the time zoneand deletes the old files?

  I need set the date and time

  and remove all the old unwanted files

  the calendar was gray does not allow me to change the current date.

  Anyone know how to change

  

  

  Hi all!

  According to this the below Knowledge Base article, Remote Configuration System Support must be installed on the target for time settings to change in MAX.

  http://digital.NI.com/public.nsf/allkb/FAB0EC4D6E5EE0F386257738005733A3?OpenDocument&MeTC=max_MAXDat...

  If you don't know what version of the system supported remote Configuration software that you have installed on your device target, it is likely that it is not yet installed. Add this software by clicking below your target to the MAX software option and selecting "Add/Remove Software". This is where you will install the System Configuration Remote Support software.

  Please let us know if you have any questions!

• How to log on automatically to the apex and run a specific page / application

  Hi all.
  
  I would like to know if there is a way to connect automatically to the apex and run a specific page / application. I mean, invoke browser and necessary information for you connect (non-public user) and run a specific application (secure ina in if possible).
  
  Thanks in advance...!

  Hello

  Well, as a very crude test, you can set your authentication scheme being request Express authentication define specific users to Apex. Then, create one before the login process of header on the page of connection (101) to automatically open a session that contains:

  apex_authentication.login(
      p_username => :P101_USERNAME,
      p_password => :P101_PASSWORD );
  :P101_PASSWORD := NULL;
  

  conditional on P101_PASSWORD is not null.

  Then you can login using your username and password in the URL, for example

  f? p = YOURAPP:LOGIN:P101_USERNAME, P101_PASSWORD:username, password

  Rod West

• When can I test images of base in the development?

  The last base image for Firefox OS is labeled 188 [1], and it contains Firefox OS 2.2.
  I encounter a weird bug allowing no install me any version of Firefox OS but 2.2 on my flame. [2]
  So I think that test a new base based on v. 3.0 image I would like to install Firefox 3.0 OS and fix this bug.
  How can I do it without compiling everything by myself, because I do not have enough free space and RAM on my old PC?
  Thank you very much!

  [1] https://developer.mozilla.org/en-US/Firefox_OS/Developer_phone_guide/Flame/Updating_your_Flame#Updating_your_Flame ' s_software
  [2] https://bugzilla.mozilla.org/show_bug.cgi?id=1112663

  Hi Airon90,

  For questions related to development and for questions and instructions flashing, you can write to the mailing list dev - b2g, where other developers will be able to offer possible solutions:

  • b2g - dev mailing list

  -Ralph

• CF10 Standard returned to the developer and stays there

  Hello

  I have a very strange behavior: for years, we run CF10 Standard on Win2k3 to a former production site. A few weeks ago, I had problems of BACK-like on it and discovered that CF Admin shows the Developer Edition version. It was quite surprising to me, because we have a valid Standard CF10 series from 2012. Of course, I immediately walked again, but nothing helped. CF10 would remain in a State of developer.

  
  

  Can it be caused by some CF10 updates? We are 13 update. As far as I know, we shouldn't have all that is a feature of its CF10. Is it possible that some CF10Ent feature has been activated somehow preventing now enter a Standard series? And if so, what can I do to get the bacl for a complete job, CF10 Standard? Any other ideas?

  
  

  CF10 currently runs on Apache 2.2.27. Apache has been updated repeatedly over time.
  

  This is crucial because of the limits of intellectual property. Lucky us that this system is only used only rarely. But still: BACK problems appear.

  Any ideas how to fix this?

  not to say that it is very urgent for me...

  Thank you

  Tinu

  Hi David,

  Go to \ColdFusion10\cfusion\lib and search license.properties. Open this file in Notepad or wordpad, and then you will find the serial number for ColdFusion 10. If not, then please enter your license key, save the file and restart the ColdFusion services.

  This should work for you.

  Kind regards

  Anit Kumar

• LR5 - no base in the develop module Panel [was: problem upgrade Lightroom 5?]

  I updgraded to L3 to L5 (Win8 64bits) without no problem, except for the 'Basic' Panel in the develop module. I tried the upgrade to have the 'new' slides here - highlights, shadows... But I still have the old (recovery, light...) there. What has gone wrong? What will I do to get updated?

  If you change a photo that has been already transformed into Lr3, then you are probably using Version 2010 process, which includes the sliders as recovery and fill light.

  You can update the PV2012 image in the camera Calibration Panel in the develop Module.

• How easy to keep compatibility with the development and staging ucm

  Hello
  
  The content is organized by the record. The limits of the virtual folder to 1,000 files. If the number of the item of content of the virtual folder above the limit, I have to create the folder manually. Is it automatically average to cope?
  
  However, the record of the Complutense University of MADRID is identified by file ID, not the name of the folder. When I create the folder on the development, there may be conflict with the AAU of the stadium. Is there a best way to manage?

  I agree that WebCenter would be an overdose just for that. If necessary, take a look at the ADF, though - it's not a product, rather a Java development framework, and the birds are singing you could use this knowledge in the future versions of the AAU.

  If you consider your question as answered, mark it as such-, or specify the details.

• Y at - there a big difference between the base of the m3 and m5 models?

  I had my m3 2016 Macbook for a week so just thought I would ask so that I have time to exchange it if need be. I wondered outside storage space, y at - it a big difference in processors Core of m3 and m5? Apple uses a "customized" version of the processors? I ask because Apple lists the m3 1.1 Ghz but not apple models are call at 900 mhz.

  The processor is clocked at 1.1 Ghz. There are different models made by Intel, including that which is supposed to be clocked at 900 Mhz. Apple does not use a customized version of the CPU. The differences between the M3 and M5 model is displayed on the Intel Web site. Among the differences are the M5 is clocked at a higher speed and the M5 is generally about 15-20% faster than the M3 at the same clock speed.

• How to move the navigation bar so that it is at the base of the toolbars and bookmarks bar is upstairs?

  Used to be correct. Navigation toolbar should be located directly above the bookmark and menu at the top of the page content.

  refer to the

  • Customize controls, buttons, and Firefox toolbars

  article for this.

• Reactivate microsoft reader, but when I get on the site and I try get a 500 Server error

  Original title: 500 Server error.

  I'll have to re-enable the drive of microsoft, but when I get to the site and try I get a server 500 error is it possible around that I have hundreds of books with a value of eBooks that I can't access

  Original title: 500 Server error.

  I'll have to re-enable the drive of microsoft, but when I get to the site and try I get a server 500 error is it possible around that I have hundreds of books with a value of eBooks that I can't access

  Problem solved by other means.

• HP 8600 - Document remains in the spooler after printing from a Remote Desktop server

  I have a printer HP 8600 N911a . The printer prints a document on a Remote Desktop server, but the document will stay on the spool and held until the next documents aligned to print. It does this for all articles printed from the Remote Desktop server. It prints and receives faxes perfectly all the other times wireless.

  Hi swmpthng88,

  It is an indication that the problem is in the server operating system. To be sure, you can connect the printer to a different computer, and you don't have the issue, then, if the operating system on the server on which the problem of the queue. Let me know what you find?