Suddenly the question of password occurs when Satellite M105 commissioning

Similar Questions

• Avoid the fast blink that occurs when testing a Flash animation that has a syntax error?

  I teach the development of games using Flash Professional CS6, and one of my students has photosensitive epilepsy. He finds that the "strobe" effect that occurs when he runs the Test film on a film with errors in his script triggers headaches which can be a precursor to an adjustment. Obviously this makes it very difficult for him to complete his laboratory and the assignment of work. Is it possible to prevent a Flash animation running if it contains a syntax error?

  I created workaround by adding a bunch of additional images for the beginning of the movie, which displayed a message "SYNTAX ERROR," If the script does not work - it gives my student seconds margin quite the movie, before the start of the stroboscopic effect. I have a single image at the beginning with a goto statement that jumps over the frames of error if the code has no syntax errors.

  This seems to work ok, but it's an ugly solution - does anyone know of a better way to deal with this?

  Thank you.

  Another solution is to use Flash Builder (IMO you should teach this workflow, because it is more suitable for non trivial projects), and then you have several options:

  1. After an ACE code change, build automatically
  2. If you have not changed the code, project > Clean
  3. If you have set up your project so that you get the buttons Flash project, you can click the a (compile in Flash)

  These options will simply build the Flash animation without playing, and you can see the warnings or errors in the Panel right before clicking the button Play or Debug.

  If all this is just too much for a beginner student, you can still post the film, which creates the swf file without play, watch the Panel of warnings/errors and then launch the SWF in any other way (for example, by double-clicking on it or the HTML page generated).

• The problem that may occur when adding a domain to a windows machine.

  "The following error occurred when DNS was questioned about the resource record (SRV) service location used to locate an Active Directory (AD DC) domain controller for domain 'domainname': the error was: 'the DNS name does not exist.'" (0x0000232B RCODE_NAME_ERROR error code)  The query was for the SRV record for _ldap._tcp.dc._msdcs.domainname common causes of this error are as follows:-records of The DNS SRV to locate an AD DC for the domain are not registered in DNS. These records are automatically saved with a DNS server when an AD domain controller is added to a domain. They are updated by the AD DC at set intervals. "This computer is configured to use DNS servers with the following IP addresses:" in the IP addresses to the IP address of the domain is added, bt still I get the error above all in addind the domain to a windows machine.

  Hello

  Thanks for choosing Microsoft Community Forums.

  As the question is limited to Windows Server, it is better suited for the IT Pro TechNet public. Please ask your question in the Forum on TechNet Support. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  I hope it helps. If you have problems in the future regarding Windows please let us know. We will be happy to help you.

• BlackBerry Smartphones Forget the question of password and security for Blackberry Id

  I try to use my Blackberry Id and I realize that I forgot my password question and security.

  I can't find a solution, I have to do?

  Read this to get instructions to reset your password BlackBerryID:

  KB26361 How to reset a BlackBerry ID password

  *****
  It must be remembered the BlackBerryID password or secret answer to the question. Without either, you're stuck.
  Your choice is:
  -Use a different e-mail account to create a new BlackBerryID (with which you will lose access to all apps purchased using the 'forgotten' first BlackBerryID, or)
  -Find the initial email you have been sent to confirm the initial BlackBerryID and there are a link to click to cancel and delete the account. Click on this, delete the account and then you can use that same e-mail to create a new account.
  Good luck.

• What is the best/better way to reenumerate USB ports from a script? I need to emulate the same enumeration that occurs when a USB device is either plugged or unglugged to a USB port.

  I'm working on a network to restrict access to the ISSO role USB mass storage, only. Management wants to access USB Mass Storage for ISSOs on all workstations while blocking access to USB mass storage to all others... on all the workstations. They also want to that USB ports remain available for everything except Mass Storage.

  There are many ways to do it, but the only 'reliable' method, I found so far is to point the HKLM\System\CurrentControlSet\Services\UBSSTOR\ImagePath key to some fake file to block ports and rename it back to access it again.

  To do this, I need to do things more two 2...

  1. make sure that the ImagePath key always has the false value at startup, and

  2. create a login script that affects the ImagePath value when a member of the ISSO group connects... and reset it when they log off.

  Which meet the requirements of the direction if only it worked! The problem is that USB devices must be listed again to re-read the ImagePath registry key after each change. Reconnect the device will do, but it would be unwise to rely on a user to restrict access (fox/Coop).

  The following Microsoft KB seems to be the way to go, but we do not have compilers on the network...

  http://support.Microsoft.com/kb/259695

  I know that this hack to the system is not the most elegant, but I'm just trying to make the management happy.

  Nobody knows...

  1. any (more elegant) way to meet the specified requirement, or

  2. a way to re - enumerate USB devices from a script.

  Thank you! ... Todd

  Hi Todd,

  The issue of Windows XP, you have posted is better suited for the IT Pro TechNet public. Please ask your question in the TechNet forums for assistance.

  Hope the helps of information.

• How can I change the documents of password protected when no one remembers the password?

  I've been application to edit documents that have been created by someone else who works here anymore.  They are protected by Word, and no one knows the passwords.  These documents are too large to start again and only a few words need to be updated.  How to reset the passwords so I can edit documents?

  Not possible with Adobe software.

• bought LR5 and installed, but it will not load the catalog or not work at all; get the message ' year error occurred when trying to exchange of modules.

  had the same problem with the trial version.  Have need/ability iMac with Mt. Lion.

  On the cat line of no use, or help files.  Thank you!

  HR

  Follow the procedure below.

  Click on Finder and hold command + SHIFT + G keys on your keyboard.

  To go to the folder window type exactly ~/Library and click Go

  Open the Application Support > Adobe and right click the Lightroom folder and select Get Info

  Under sharing and permissions Click on lock and unlock

  Click on add your username and the administrator if not added

  Then give permission to read and write to Admin, system, everyone and (your user name)

  Click the gear icon and choose apply to attached article

  Then click on lock

  Launch of Lightroom and check.

• says that there is an update of firmware available for my 3 t time capsule. I get "an error occurred when downloading". How to find the problem?

  I said that there is an update of the firmware available for my 3 t time capsule. I get the message "an error occurred when downloading". How to find the problem? I have elcapitan 10.11.6 and capsule version 7.7.3

  Try temporarily, connect your MacBook Pro to your Time Capsule using an Ethernet connection... If not already, then try downloading the firmware again.

• In Vista, doing the system restore, get error "unspecified error occurred when using System Restore.

  My system restore keeps coming back with the error, unspecified error occurred when using System Restore. Cannot change files. Also, after that I am unable to use my avast antivirus. All the sheilds on my Avast are lost. I; m not computer saavy so please help me

  Hello

  You can be infected with the Malware

  malware stops normally you use the system restore protect themselves remove you

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If not, try Safe Mode do a system restore

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• down loaded lightroom 5 and installed but will open it right. Opening the Message "an error has occurred when attempting to change modules.

  Have a Mac Book Air with Lightroom 4 full download on board. Just got an iMac. Wanted to load 4 Lightroom on iMac. Took the Adobe download file off the Mac Air and tried to load it on the iMac. He succeeded but open the message ' year error occurred when attempting to change modules "appeared. I removed 4 Lightroom and went to the orders of Adobe and re-uploaded my initial order to the iMac. Same effect. Bought full 5 Lightroom in hopes of difficulty but the same message appears. That is what it is! Any help?

  Error changing modules | Lightroom

• iPF8300: paper roll occurs when printing imagePROGRAF plugin in Photoshop CS5.1 x 64 on Win10

  I've heard of anyone who works with a printer large format in my company, that for all the past three weeks, each time he tried to print something using the function to export (to the imagePROGRAF plugin), the printer keeps conducted the paper until it reaches the end.

  This problem occurred several weeks after the upgrade to Windows 10 of Windows 7, but we do not suspect that it is the cause; In addition, it may be relevant that the computer used to control the printer was just selected for the anniversary update that has been installed on a day ago (well after our problems started), but we have not yet determined if the update of the anniversary has solved our problems. I was told to post a request for help anyway.

  The problem does not occur when you print using the print dialog box (which is less efficient in time), native and it does not occur when you print the Test Page Windows printer; for this reason, we believe, and our supplier (ARC Document Solutions) has suggested, that the problem is with the imagePROGRAF plugin. The latest version of the plugin that works with Photoshop CS5.1 5.21, which is no longer available Cannon us site but is available elsewhere. So far, we have tried only the 64-bit of the plugin with Photoshop version, although I have installed the plugin from 32-bit to 32-bit Photoshop.

  I also installed each utility available for the iPF8300, including a utility to update media types, who has been able to do it for the printer driver, but not for the control panel of the printer. The driver itself is the latest version 4.31. I'm not regularly at the place where printing is done, so I did not change some parameters in the plugin imagePROGRAF which might need to be changed (in particular with regard to the paper), especially since I tried to uninstall completely all Adobe Creative Suite programs and all programs focus on the Canon, then running CCleaner to remove all traces of these programs and re - install CS5.5 Design Standard and the iPF8300 drivers and utilities.

  It turns out that "without space upstairs or downstairs (document to keep)" under Options Roll is exactly what we needed, as I learned when I called Canon support line. (Maybe this box exists because some people simply print very long images on whole rolls of paper?)

• HP 2000: I forgot the power on password

  I have a HP 2000. I don't remember the power on password. When I hit enter 3 times I get "system disabled". The code is 58493753.

  need help, thank you.

  Please try: 47591395

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the white button on the right to say thank you Thumbs Up *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  GBL84

  Although I am an employee of HP, I speak for myself and not for HP

• 6.6 Lightroom, that an error has occurred when attempting to change modules

  Whenever catalogs of switching or create a new catalog in Lightroom 6.6 I get the error 'an error occurred when attempting to change modules' bit followed by a crash of Lightroom. I followed all the steps in the troubleshooting guide for errors that can occur when you change the modules in Lightroom repeatedly, wiping out all my settings and the catalogs and re - download Lightroom from Adobe web site and put it back, all to nothing does not, the problem persists.

  When reinstalling, I noticed that Lightroom 6.0 doesn't have this problem for me. However, once upgraded to 6.6, it presents this crash. On a lark, I tried upgrading 6.0 only to 6.5.1 - it works and allows me to create new catalogs without crashing. So, it seems that any accident that happens here recently got introduced to 6.6.

  I use a 2010 Mac Pro running MacOS 10.11.5.

  Are there solutions to this crash to 6.6?

  Look here for a solution.

  Troubleshooting Guide for errors that can occur when you change the modules in Lightroom

• Restart the question Module?

  I have a course in first Captivate with two modules. The first module is a module of 'Activity' that allows to the learner to access a PDF file, they should read before taking a quiz in the second module. Two of these modules have been built in Captivate 9 with the last update.

  If a student fails the quiz for the second module and they out of course, and then go back and try to resume the second module (the quiz), the module will not load. All they get is a blank of the same size that the module. I can't understand the problem. I have the quiz module set to never send the restore data. Which should cause the module to charge fees every time.

  In this case, you cannot restart this second module because it is right, it will fail to load.

  Anyone have any ideas?

  Hi Peter,.

  Following our conversation, the question seems to occur if the option "Submit all" has been used in Quiz > Preferences > settings. As suggested, you can uncheck the "Submit all" button and then publish your Captivate 9 to the first Captivate course directly and you will be able to restart the module without any problems.

  Or

  If you want to use the option to submit all the in your course you can publish a release zip (SWF) locally on your machine and then manually upload it to first Captivate. This way with that you will be able to re - charge the course first submit all the functionality.

  Kind regards

  Ajit

• Question about password on the new Satellite A105 HARD drive

  I am the owner of a Satellite A105 and the hard drive was failing. I got a new hard drive but before I gave up on the current one I decided to wipe it clean and a few tools to see if it was a way to recover.

  Well, when wiping clean it restarts and then he showed me a message saying "password type of HARD drive internal" or something similar. I do not know the password so I can't use the hard disk more (or is there a way to reset the password?), but before you install the new hard drive I want to know if there could be a problem installing the new hard drive in the laptop without knowing the previous password.

  I mean, it locks the new hard drive or is it completely independent of the installed hard drive? The one I have is brand new, and I want to know if I plug it in and from the laptop are all I have to do?

  Hello

  If the HARD drive password has been activated and you don t usually know this password then the HARD drive is locked and can no longer be used.
  It s simply not accessible and it s not possible to remove this password.

  > I want to know if there could be a problem installing the new hard drive in the laptop without knowing the previous password. I mean, it locks the new hard drive or is it completely independent of the installed hard drive?
  I think that he should t be any problem with a new HARD drive.
  As I said the password is stored in the sector specials on the HARD drive. The old password should not exist on the new HARD drive (if the password has not been set).

  Best regards