Issue of charts of amplifier?

Similar Questions

• Issues running Chart 3d after upgrade to 8600 m GT

  I recently decided to upgrade my Inspiron 1720 nvidia 8400 m graphics card to the 8600 m gt I have received and installed yesterday. Pretty simple.
  Here's the problem: everytime I try to load any program that seems to want to use graphics in 3d (games, aero glass vista theme), the screen goes black and never recovers. I have to do a hard shutdown. I tried upgrading drivers to the latest on the dell site, but that did not work.

  Is there something that I don't forget to make it work or is it just a bad card?

  Thanks in advance
  C.

  Course record:
  Inspiron 1720
  Intel Core 2 Duo T5450
  256 mb nvidia 8600 m GT (currently not able to play games or to load 3d applications)
  screen high resolution (1920 x 1200)

  
  

• Officejet pro 8100 chart printing issue...

  Hello

  I bought a HP Officejet 8100 pro a few months ago, and I had trouble printing graphics on this subject. For some reason, no matter how I set the page to print, he ended up a very large part of the print image on a full page instead of the page I set out.

  The printer is connected to the network via CAT5 (NOT the USB) cable, and I use the Officejet BASIC drivers.  The graphics are print sources - some are directly from a Web page, some are printing through Corel Draw or Photopaint (X 3), and I have the same problem that I print out an old computer from Windows XP or a Windows 8 pc brand new.

  For example, in the past when I would print a graph of Corel Photopaint (something I scanned), regardless of the size of the image (physical size or DPI), all I had to do was set the page layout in the control panel of the printer to print as indicated or adjust α page and the printer would print it as it would look in the "Print preview" pane   But now it only prints part of the graph and print very large even if the size of the graphic is show less than 8 1/2 x 11.

  I tried to reduce the DPI of the image, but it does not help.  I usually scan at 300 dpi, but still reduced to 72 dpi file, does not help.  All what happens is the file prints the same very large size, but then is pixelated.  I also tried to reduce the much smaller physical size - say up to 3 'x 5', but it will not always print the full graphic.  It will only print on a 1/4 of the image and place it at the bottom right of the page.  And the printed area will measure 3 "x 5".

  There really scratching my head.  I looked in all the printers setting panels for something that could be an adjustment of the layout and change anything to even remotely suggest it would help, but can't find anything that would allow me to make the appropriate adjustments in order to print correctly.    I use HP printers for nearly 20 years and used all types (of Officejet, Deskjet, Photosmart, etc.), but it's the first one that left me speechless.  I like how frugal, is with his use of ink, but if I can't print my chart, his frugality is wasted on all pages of the curse.

  Print the note driver... I voluntarily has not installed FEATURES COMPLETE drivers because I know how intrusive, they can be and will install more things than I care to use or to have installed on my computer, so I prefer NOT to install these drivers, unless it's my only option to resolve the issue.

  Any suggestion would be appreciated.

  Kind regards

  Chugbug

  BLOCKHEAD (slap forehead)!

  Thank you!

• Another chart update rate issue (using a state machine)

  Hi all!

  I'm develiping a pilot for a new instrument.  I have the basics of work based on the vi tree tutorial.  Now, I'm creating a basic example.  I started by watching a tutorial of State machine (a soda dispenser).  I have 3 States, basically init/reading data/check buttons & writing. Everything works great, reading and display of data. I would now like to add a chart for one of the data (SAP in this case).  Try to implement the method using the loop counter.  Loop cycles at 100 ms for now updating in 5 seconds (later must be user input).

  So basically, I have a simple state machine that updates the values on the screen in a certain State.  I need these data at the top level for trace or possibly turning most of these (less graphic) in a self-contained vi.

  Anyway, I have a Boolean LED in the main loop that flashes every 5 seconds. So far so good.  Except that the graph updates apparently at random?  Put the prog in sleep mode and I have seen the updated table when the data has been read (inside the red box). He has every time.  I'm just creating a local variable inside the red zone...  I see sporadic updates in the charts, maybe 5-10 updates every 5 seconds.  What Miss me?  If I change the iterations of the loop to a faster number (e.g. 10 ms) graph updates like crazy (although the CASE is false).

  

  Hi Steven8R,

  The chart will update any update a fact local variable refers to the table.  If the chart should be updated each time the code in red box runs.

  The code you have in the structure of the business is not doing anything.  It's just whatever data, the graph contains the reading and writing in itself.

  Something you might try to do instead is wiring the output of the amp VI get directly to the table AMPS inside the 5 second delay of the case structure.  This will update the chart as the most recent data point every 5 seconds.  Is that what you want?

  Best,

• Amplifier Alienware Graphics issue

  Hi all

  I will receive my newly ordered Alienware 17 R3 and the amplifier. In fact, now I haven't decided to buy what kind of desktop GPU in my amp, but the amplifier has the usb connectors, which can be my home station to connect the external mouse, hard drives. I wonder if the amplifier usb slots will work without any inserted GPU. I'm back to alienware products and hope to get a reply.

  Thank you.

  Hello

  Yes, they should work even if you do not have the video card installed in the amplifier. Try it and let us know if you encounter any problems.

• Issue replacement string & title of chart axis with. syntax

  Apex 4.1.1
  
  Hello
  
  I'm having a problem of replacement of a title of axis of graph with the substitution syntax &. P5_MYFIELD, where P5_MYFIELD is an element whose body of PL/SQL by Type of Source function:
  Start
  Return web_message.show ("LASTNAME", "dk");
  end;
  
  The element is set to the same Page as the graphic in a different region. I see that feature works well, because the return value is displayed in P5_MYFIELD.
  There is a second point in another region on the same page where the source value is set with the substitution syntax & P5_MYFIELD. It also displays the expected value. But when I use the string & P5_MYFIELD. as the title of the axis, it is not displayed.
  
  I also defined a P0_MYFIELD field on the zero of the Page with the same function, when I reference that with & P0_MYFIELD. as the title of the axis at Page 5, the value appears correctly. I tried the same thing with a field on the Page 1, & P1_MYFIELD. and it appears correctly.
  
  In my view, the chart axis title must be replaced before that the P5_MYFIELD element is the execution of the body of the PL/SQL function to get its value. Can someone tell me why?
  
  We want to use the syntax of string substitution to translate all our labels in different languages. I would like to create hidden objects with type body of the PL/SQL function for all the labels on a page of the source and refer to these values as the label definitions. I would like to place them on the same page as the labels.
  
  Thank you
  Anne

  The fundamental thing is that the P5_MYFIELD must be filled before the real graphics area where you want to reference.

  Because in the APEX, is made in a particular order according to their point of view, sequences etc...

  So the best way would be to move the element source (body of the PL/SQL function) to a calculation with calculation point before the header

  Now when you return your apex page, the value of the items will be available for all regions, which restitueront after the header

• Issue of satellite A300 - 15G Conexant - improved sound quality Audio

  Hello

  After that I got my HP Vista to Windows XP, I came across a very strange thing. There is no problem with drivers because they could be easily found on the TOSHIBA web site. After you have installed all the drivers, I mentioned that the overall sound quality is worse.

  When I started studying the issue, I came across an anomaly. When you open a file in Winamp and, without closing it, open a movie in Windows Media or any other video player, the sound improves a lot.

  The same phenomenon occurs with the modem. When you start the connection, or to be more precise, when the President of the modem lights... Here, the sound is still improving. I tried many things... like downloading the drivers of different sites and different versions and re - install.

  But nothing helped. There is no problems with Vista so I guess, it's a software problem. I googled a bit and found some more people who have the same thing.

  I hope someone can help me because of the use of the Harman\Kardon pregnant if they do not produce sound?...

  Hi guys

  I found this Conexant audio driver.
  http://webpages.Charter.NET/mmooglemirror/Compaq%20C751nr%20Audio%20XP32.zip

  I installed it and it works fine for my laptop!

  Check it out!

• Charter & Airport Extreme: random drops/disconnects

  OK, I'm at the end of my mind to try to get the Charter to work with my wifi from the airport...

  After years of strong connectivity, my modem Asus started appearing as "disconnected" Airport utility. I have hard reset the modem, replaced the modem, replaced the coaxial cable to the modem, replaced the 6th gen AirPort Extreme (connected via wan to the modem), hard reset and rebuilt factory default as long as the airport, and the 5th gen Airport (connected by Ethernet at the 6th and in bridge mode) and always keep my modem dropouts or moments where my Airport 6th get suddenly seems to now show activity utility Airport.

  I have connected a laptop directly to the Asus without any problems at all, so it's within my network. But I am confused... And very frustrated.

  I'm including some settings below, but any help would be appreciated... I don't know what has changed.

  Oh, and the two airports are running the latest firmware for their respective models.

  Thank you all!

  For the gen 6 Airport extreme, directly connected to the modem via the Wan:

  • Is connected to the Internet via DHCP
    • Configure IPv6 is set to "Link-Local" only (I have checked and don't see that IPv6 is currently active in my Charter service area)
  • Wireless network mode is "Create a wireless network" and I chose the channels for 2.4 and 5 Ghz that I found to be opened via iStumbler
  • Network has the router Mode DHCP and NAT, with an active lease 365 days DHCP and NAT Port Mapping Protocol

  For the extreme 5th generation of airport, connected by ethernet to the 6th gen:

  • Is connected to the Internet via DHCP
    • Configure IPv6 is set to "Link-Local" only (I have checked and don't see that IPv6 is currently active in my Charter service area)
  • Wireless network mode is "Create a wireless network" and I selected channels for 2.4 and 5 Ghz as the 6th gen
  • Network is set to "Off (bridge Mode)" router Mode

  6th Gen airports have had a lot more problems with the compatibility of the modem that previous generations, so if you have the time... connect the 5th Gen airport to the modem and put in place to do DHCP and NAT to the 6th Gen in bridge... Mode to see how things work out like that.

  Charter do not have active IPv6 yet, but they and about all the other suppliers have been the addition of new equipment and changes to their service. This can be a factor in your connection problems.

  Yes, I'm sure that the Charter will say that this has had no effect at all on their regular service of IPv4... Since the ISP always claim that they have no issues when you ask them about their service.

  If you decide to exchange the Gen 6th and 5th generation, as I suggested above... and you still have trouble connecting... then you are going to have to decide whether to keep the airports and to try another brand of modem... or... keep the modem and try another brand of router.

• Switching between the 2 sets of values controlling the axis y in a xy chart.

  All, morning

  I am very new to this (like 2 days now) and will soon sit the Labview core 1 and fundamental measure, bare with me!

  I'm basically extraction 2 string values that is issued by a Board of Directors, I have by IP, one value for line voltage and the second measure concerns the battery voltage.

  I would like the option to use a control switch to differentiate between what is entered the chart at the push of a button.

  Is there a way to do this?

  Thank you very much

  Alex

  Have you tried the Choose function?

• Chart how many plots with wpf chart

  This is probably a very basic question, but I can't understand how the chart more than a set of data with the chart WPF in VS2010.  There is a DataSource property on the chart, but I don't see the same on each class of land.  I can't find any documentation on the source property of the chart data.  Can I pass an array of doubles and he plots very well but now I need to draw two sets of data.  Can anyone help?

  The DataSource property is documented in the how: map and graphic subject and on the GraphBase class (which is the type that defines the property). However, it seems that these issues do not directly address your question multiple plot; I put in a request to improve this.

  To answer your question, if you use DataSource to pass an array of double values in a plot, you can use a collection to pass data to multiple locations (for example a double[][] , a List , or a ObservableCollection ).

  Otherwise, you could use the Data collection to provide each parcel with data; for example:

  graph.Data[0] = /* double[] for plot 0 */;

    graph.Data[1] = /* double[] for plot 1 */;

  ~ Paul

• transconductance amplifier and analog output

  Hello everyone,

  Sorry if I asked a perhaps trivial question, but I'm still a beginner in data acquisition.

  I need a negative pulsating current my PCI 6251 and measure the resulting voltage on the load output at the same time.

  To do this, I thought about the exit a pulsed voltage AO0, sending voltage to a transconductance amplifier and generate a current in my care.

  It is my transconductance amplifier... load, modeled on the square, is referred to as the + 5V on the PCI-6251 map and no 'field', since I need to be negative.

  

  Now I have to read the voltage on the load through the AI0, and I lost between issues of land... Because the load is called my + 5V, should I measure differential or simple nerve?

  Thanks for your time

  Denise

  Hi Denise,

  You must acquire in differential mode.

  See http://www.ni.com/pdf/manuals/371022k.pdf page 4-12

  Ciao!

• Draw a line connecting two points in the WPF chart

  I'm trying to understand the best way to draw a line between two existing points on my graph in WPF.  At first, I thought I had it works fine; I just added another parcel to my graph then given exactly two points for rendering.  But I quickly noticed that the app has become surprisingly slow and CPU was quite high (adding other plots does not affect the use of the CPU as long as they have a complete set of points (?)).  He wants me if I looked at using the DataToScreen method on the chart but I can't know what the parameters are.  The second parameter is simply an IList that tells me a lot.  This seems to be the method I want to use for the coordinates of a point on the graph screen.

  No one knows what the second parameter is supposed to be for the DataToScreen method?  Everything I tried throws an Exception of Argument.

  Thank you
  Dan

  DataToScreenwill return a screen coordinate in the plot area of a chart of the value of the raw data horizontal and vertical in the given list. The parameter value is a IList for compatibility with other methods of graphical query such as FindNearestValue , return IList values containing raw data.

  A concrete example, say you had a graphical configuration with a wide horizontal axis ranging from 0 to 100 and a vertical axis double precision ranging from 10 to 20:

  
          
              
              
          
      

  To get the screen coordinates of the value at the center of the two axes, you can call:

  graph.DataToScreen(plot, new object[] { 50, 15.0 })

  Note that the raw data values corresponding to the type of axes (horizontal AxisInt32 returns the integer 50 and vertical AxisDouble Gets the value 15.0 ).

  You also mentioned a performance issue where "adding other plots does not affect the CPU so that they have a complete set of points". I did a simple test app that adds an array of two points of a chart on each key (for example graph.Data.Add(new[] { new Point(x1, y1), new Point(x2, y2) }); ), but could not reproduce the problem you saw. Could you share the code, you use to draw the connection line?

• Can build, but can not run a simple WPF chart

  Hello

  I just got my NI Measurnments Studio package and I try to add a graphic to my WPF c# application but I have questions that I have not seen in the examples of the trial.  Before you buy this package, I changed one of the examples of the trial to draw my own data and it worked beautifuly.  Now I tried to do the same thing in my own project and it builds without error but I get InitializeComponent() exception when I try to run it:

  "The call of the constructor on type"NationalInstruments.Controls.Graph"that matches the constraints of binding specified threw an exception."

  That's what I have:

  • Added to my project references (VS 2013)

  C:\Program Files (x 86) \National Instruments\MeasurementStudioVS2012\DotNET\Assemblies\Current\NationalInstruments.Common.dll

  C:\Program Files (x 86) \National Instruments\MeasurementStudioVS2012\DotNET\Assemblies\Current\NationalInstruments.Controls.dll

  C:\Program Files (x 86) \National Instruments\MeasurementStudioVS2012\DotNET\Assemblies\Current\NationalInstruments.Controls.Graphs.dll

  • Added to this, notably in XAML

  "" xmlns: or = 'http://schemas.ni.com/controls/2009/xaml/presentation '

  • And added this chart control to XAML

  
  
  <>area of Label = "Channel 1" x: Name = "Plot1" / >
  <>area of Label = "Channel 2" x: Name = "Plot2" / >
  
  
  

  Nothing else behind it, so I should at least power run and see a graph empty, right?

  Please advice.

  Thank you!

  I got it work.  Basically, it was licening known issue in 2013 VS.  I had the .licx added manually in my project file.  Here is the email that I received or who has been very useful:

  "I noticed that you use Visual Studio with Measurement Studio 2013 2013. Currently measure Studio 2013 is only officially supported by Visual Studio 2012, however, many of our clients were able to make it work with Visual Studio 2013 Measurement Studio 2013. We have an article for the knowledge base that walks by working with Measurement Studio 2013 in Visual Studio 2013. It might be good to make sure you followed every step through this article: http://digital.ni.com/public.nsf/allkb/C51E3B38578FAD2786257C070069F386

  It looks like you are using the correct assemblies, and we were able to test the XAML for our side. It works beautifully, so it doesn't seem like there's something is happening with the code. Another thing, we can try is to clean the Solution and regenerate the Solution in Measurement Studio. It will be a good step to make sure that no old persistent files. »

  Thank you

• chart of increment with the new data to the worksheet

  I'm having a little trouble and could use some help if someone has a moment.  My vi is streaming at 2 Hz data acquisition and adding data in a worksheet open.  I would like to be able to view the data from the worksheet in graphic form, but I don't want to redraw all the data points whenever the worksheet is in graphic form.  I have attached the section from vi which is dealing with this issue.  I have included an incrementer in my loop (+ 0.5 each implimentation) to allow time (for (i = 0) that each data point is collected, so my spreadsheet has essentially 2 columns, one for the time (0, 0.5, 1.0, 1.5, etc.) and a second column of data point recorded.  It all works very well.  It's just the graphical representation that gives me.  Assume that the broken wires are not broken in total vi.  Any ideas on that?

  For anyone interested, we solved this problem by attaching a waveform chart to the table converted out of my acquisition of data and define the history of this table to include the necessary length.  It seems that a waveform graph is not enough, and each parcel will not appear unless the table is horizontally (columns instead of rows for each data point).  Thanks to Jeff at home OR for the help on this one.

  Matt

• How to table of waveform of input 1 d in the lock with the amplifier

  I have a LabView application that I have to change to include a lock in the amplifier.  The application uses a capture card of data several times to capture a sample of 0.1 s of two signals (one signal, a single reference) in a laboratory test.  Before the measure was made by the base RMS module to record the VRM in the signal, and the reference is ignored.  However, the measures that I am now the scene run many s a lower and so I would use a simple RECS in the kit OR of.

  I am happy (I think) with the configuration of GARLIC but I am struggling to understand the requirement of input data.  It should be an array of 2D, with the identifited of reference signal.  However, the output of the part of the utility that captures the waveform is a table 1 d of waveform.  Could someone advise me on how to convert the table 1 d of waveform in a 2D table suitable for admission to the GARLIC?

  As you may have guessed that I am a newbie to LabView, I try to modify an application designed and assembled by a former colleague, so I'd appreciate simple suggestions!

  TIA.

  You have separated for each signal waveform 1 d arrays, or do you have a 1-d single waveform chart where signals are separate items in the table? If this is the first, you should do something like the code below. If you have a single Bay, then the code would be similar - you could just use a table of unique Index function. You may or may not need to transpose the table 2D. I don't know what waits for the lock in Subvi - channel data by row or column.