Issue of DB in refreshment...

Similar Questions

• Refresh the browser of the Flex application?

  What is the syntax to issue a command to refresh the current browser window?
  
  I think it's a quick and easy way for the user to 'start from scratch' in my Flex application.

  Here you go, more easily:

  navigateToURL (new URLRequest('JavaScript:location.reload\(true\)'), "_self")

• Windows Store - Error Code: 0x80070005

  I just installed Windows 8 of MSDNAA. I tried to download a few different applications (Netflix, Kindle, Hulu Plus) by the Windows store and I get the error «something has happened and this app can't be installed...» "Error code: 0x80070005. I tried selective start-up (disabled all startup items and services), but it was a step to go. I tried to create a new account, but it was a no go as well. I also synchronize the time and date against windows server and double check that the time zone is correct, also a no go. Any suggestions to solve this issue without doing a refresh?

  Solution:

  I finally got a level 2 tech for give me a call. He went through all the diagnosis and possible solutions. Nothing has worked. Then he told me to try a system reset. And that resolve the error 0 x 80070005 when the store appeared.

• Stuck at 0% - even after a clean install Windows Update

  Hi guys,.

  I am aware that there are various other posts on the same question, however, I think mine is unique.
  I have 144 updates to Windows that will not download and will remain at 0%. I did everything I could to try to resolve this issue - including making a refresh and a clean reset/install of windows 8, but none of it worked.

  I am aware that there may be files that are corrupt, but if this is the case, would not have done a clean install/reset windows to fix this?

  "I tried different methods including attempts to install the updates one at a time, but this does not work either, they all remain at 0% complete.

  I'll be very grateful if this has been resolved that it is forbidding me download windows 8.1 and reserving my copy of windows 10!

  Thank you very much
  :)

  Try this:

  1. open a command prompt

  2. type the following command and press ENTER: DISM.exe/online/Cleanup-image /Restorehealth

  3. once the order is completed, the results here and try to check the updates again

• Signature failure

  Hi all

  I created an application a year ago with Folio Builder that worked very well. I also did an update in August that worked as well.

  Since the certificate and expired Provisioning profile that got brought to re - issue once again and refresh the App. But refreshing the App fails with the error message 'failed... signature. ».

  I tried many things suggested in other cases of forum, made sure (even nothing changed in the Article names) confirm that all the names of articles (no error when sending on the generator producer/app folio). Re-did the GSM, and provisioning profiles just in case (and I have seen some other cases forum suggesting it might be a problem with certificates). I can't see what seems to be wrong and there is not a lot for any help why it fails. It would be nice to see some kind of error log.

  I appreciate any hint very much as I have exhausted all the options, I can see as a possible cause.

  Thank you

  Mathias

  Thank you all.

  It was actually a problem with the certificate, but not that I had to renew it or so. But the first time I exported from my Mac Keychain there is no triangle in front of the private key and the certificate is not displayed. I did it again today, and for some strange reason, it differently, there was a triangle that I could collapse and see the certificate with the private key, exported again and now it works like a charm.

  Sorry for the inconvenience and thank you for all your help!

  Mathias

• ADF calendar refresh issue after creating an event

  Studio Edition Version 11.1.1.7.0

  Of summarized the issue: supporting the bean when we queue to a < af:commandLink. ADF event doesnot registered ReturnListner is called

  Real-world scenario

  We use the component adf:calendar on double click on a calendar date, we call a workflow for create/edit an event. After that the user submits and returns to

  Main calendar, that the data are not updated.

  Information on the implementation:

  Step 1: Jsff

  Double click calendarListener = pageFlowScope.calendarBean. onCalendarEvent is called

  < af:calendar id = "c1" startDayOfWeek = 'my' view = 'list '.

  toolboxLayout = "all the customToolbarCreate.

  styleClass = "CALcss AFStretchWidth"

  value = "#{bindings." CalendarFilteredEventsVO1.calendarModel}.

  Binding = "#{pageFlowScope.calendarBean.Calendar} '"

  calendarActivityListener = "#{pageFlowScope.calendarBean.onCalendarActivityEvent} '"

  activityStyles = "#{pageFlowScope.calendarBean.activityStyles} '"

  partialTriggers = 'cb1 cmi1.

  calendarListener = "#{pageFlowScope.calendarBean. onCalendarEvent}" >

  Step 2: backing bean

  support bean calendarBean. onCalendarEvent

  The event is pending

  ActionEvent actionEvent1 = new ActionEvent (callCreate);

  actionEvent1.queue ();

  Step 3: jsff

  This event, which is on hold will call the workflow

  < af:commandLink id = "cl1" visible = "false".

  returnListener = "#{pageFlowScope.calendarBean.refreshCalendar} '"

  styleClass = "miniViewText hide-mobile."

  action = "createEdit" useWindow = "true" windowWidth = "600".

  windowHeight = "400" windowEmbedStyle = "inlineDocument".

  Binding = "#{pageFlowScope.calendarBean.callCreate}" >

  But after have create/edit the workflow task is completed, the registered ReturnListner is not called.

  Where we have logic to update the calendar.

  Need Urgent help on this. Or double-click any alternative to implement

  The problem is resolved.

  1. creates a Wraper workflow... Placed the Parent task flow and pagedef added a refresh on sessionVariable condition.

  2. child special pop up flow displaying sets a session variable that lead to an update of parent.

• Refresh after Windows10 resembles the old Firefox; all pages in FF look 'safe mode' and other issues.

  Hello

  I recently downloaded Windows 10 and noticed FF goes really slowly. So in some way I have refreshed it. I knew that this would erase some bits of data, but now I am unable to restore things.

  It looks like an earlier version. When I go to any page FF, everything appears in a list. I can't choose a new theme, for example, b/c the Mozilla page cannot display graphics. In addition, I'm typing this in Chrome b/c there is no text box when I open this page in FF. I don't want to go back to Chrome.

  Thank you!

  Thank you, in this case, please turn off https scanning in avast, as it is known to cause various problems:

  1. Open the Avast dashboard on an affected system.
  2. Select settings in the left side menu.
  3. Adopt a Protection Active.
  4. Click on customize next to the Web Shield.
  5. Uncheck the option "Enable HTTPS analysis", and then click ok.

  http://www.gHacks.NET/2014/10/31/avasts-HTTPS-scanning-interferes-with-Firefox-and-other-programs/

• Meta Refresh does not refresh the menu drop-down select options but don't check the boxes... IE works without error (Max FF issue)

  Drop-down list not update even if the html code was changed using the meta refresh tag. The problem has been resolved by deleting the name of the list in the html code in the part of my page refresh. It's a php script, so I can do but with html directly, I don't see a way to solve the problem for others finding this a problem, FF should not do this.

  Example:

  < select name = "page_header_color" >

               <option >blue</option>
             <option >green</option>
             <option selected >red</option>
             <option >black</option>
             <option >silver</option>
           </select>
  

  whether refresh properly changed to this:

  < select name = "" >

               <option >-------</option>
           </select>
  

  the script modifies the page preceding between the discount and the 'real' html that resolves this problem, otherwise FF does not update the drop-down lists at all, but it is updated check boxes and everything.

  You must reload and bypass the cache to reset the choices made through selection and from the drop-down list boxes.
  
  Otherwise the selection are reloaded from the cache, so a meta reload does not work either (can work if you reset the through an onload event).

• Tecra R850 - 10K - Windows 7 Pro refresh issue

  Hello

  I have a Tecra R850 - 10K and I have a problem of refreshment with windows 7.

  Some time ago my windows desktop (I extend to explore) wint update without updating manual key - F5.

  I thought that might have caused by a driver or software, so I did a system restore and restarted the original software.

  Not good, after that it cams the same problem - for the Office/windows Explorer to refresh I have to press the F5 key. Any operation os copy, paste or create the folder require F5...

  I need help please what this problem annoying makes me go nuts.

  Post edited by: EPacheco

  To be honest I don t understand your problem.

  Can you please try to explain it again using more details?

  Why don't you update your Windows desktop? What exactly happens?

• Satellite A200-10W: refresh rate on television issue while using the AC adapter / CC

  Hello!

  I have a question on the A200 - 10W Video Out feature. In my case there is no problem with video output, it works flawlesly. But there is a minor problem.

  If I connect my laptop to the TV, it seems to be some refresh rate or analysis of the problems of line on TV, pretty boring, in other words, if I have the laptop connected to the power line. If it is running on battery power, the image is good.
  Someone knows a solution to this problem?

  Best regards
  Haiku ;)

  Hello

  I guess that's the same problem if you have an annoying Hum on audio, if you connect the audio output to an amplifier.
  Believe it or not, sometimes it really helps if you just turn around the CA plug into the wall socket.
  When this does not work, you can try to connect it to a wall outlet that is connected to another circuit in your home.
  It helped in my case.
  There may be several causes for this problem - when I google for it - in German for "Brummschleife" - the next step would be
  be buying an adapter power strip wirh a special filter.
  It also does not help if the problem is somehow caused by a connection of the antenna, there is also (expensive) solutions
  for this.

  Please report and experience!

  Welcome, Matz.

• background app refresh issue

  someone at - it still using an iphone 4 on ios 7.1.2?

  background app refresh significantly affects the performance and the battery life of this device?

  Thank you!

  Hello

  I use iphone s 6 and ipad I have disabled Apps Refresh & now to get more 3/4 hours

  Day of battery life.

  See you soon

  Brian

• Frequency image-refreshing issue

  Hello

  I had this problem: I have display 3 different images in a sequence. Entire sequence 1 last second (0.3333 by image) and will be continuously repeated. During this operation, I have a few display problems - some occurs flashing white in the photos. It is difficult to see because photos have black background. These flashes appear as white strips or fields oriented horizontally in a different part of the picture. I think that it is a refreshing question, but I'm not sure about this and don't know how to check. I failed to do screen capture of these hot flashes, which seems to confirm that this displays some question. I want to know what you guys think about this, if it can be solved, it's my hardware problem or some sort of limitation of LabVIEW. I checked it on 3 different screens (screen of my laptop, my PC LCD screen, projector) with a refresh rate of 50-60 Hz and the results were the same. I tried with different image resolutions and I think that these hot flashes are more common in the larger images.

  I enclose all VI I use to display these images and pictures of reference for you to check if you have this problem.

  A few words about the functioning of this screw:

  There are 2 screws - order one and displaying a. I need the way I want to have images displayed on the second monitor, while being able to adjust front on the 1st monitor. So there is this VI display which shows only images and VI Controling that defines all parameters. To get this to work, you must open with VI and do turn. Then you open ControlingPredefine or ControlingGenerated, the value:

  Interval (time between photos, 333 change is my case).

  Path to VI (this must be the path of the VI to display)

  Monitor (0 - main screen, 1 - second screen if you have.) I did it this way I was check with features different monitor (laptop vs single computer laptop + projector))

  and run it. When set correctly display Vi should be enlarged on the set of monitor in the monitor control and display 3 photos in the meantime

  There are 2 screws in order:

  Existing predefined on jpg images work chosen hard drive (there are 3 additional controls of path that must be resolved before the race)

  Generated generates images in real time, you can choose between 2 figures (square/circle) and set of 3 sizes (each for each photo in the order)

  Controling Vi stop button stops the two screws (control and display).

  I am attaching 2 photos (small and large) made in the painting series.

  My version of LabVIEW is 2011

  Hi Chudy.

  Can you please turn off the property picture "delete first"?  As long as this option is set, the image will erase whenever you write a value to the image.

• Refreshing (?) a Windows 7 install and issues related other sorta...

  First, asker time question... Please forgive the wall of text.

  I upgraded my desktop computer HP from Vista to Windows 7 using their free upgrade method too complicated who was to get several DVDs of them, creating about 5 more on my side and invest about 5 hours along the real upgrade.  It was mid-2009 and things were going well. 5 years later, things are starting to get bogged down... I have problems with the start time, the response of the system, etc., and I wanted to re - install Windows 7 to update the system, but if I do it the way HP designed, I need to recover the system of their integrated score that will rebuild Vista, THEN go through the routine upgrade of 5 + DVD and I do not want.

  Can I buy Windows 7 Home Premium, updating my system and use the original key of the Vista software as a number of upgrade?  Do I need to purchase a Version upgrade?  I have two laptops and three desktop computers, all computers equipped with legit Windows 7 installed, but no original Win7 doesn't install DVD... could I use one DVD to refresh all my systems?  If this is not the case, should I have options other than buying a bunch of Win7 installs?

  Thanks in advance...

  You cannot use a Windows Vista a product key to activate Windows 7. The product key to activate Windows 7 is unique to this version. Do you not have a product key with your free upgrade in 2009? Or the free upgrade to Windows 7 received as recovery media instead?

  If this is the case, then its probably best to buy a license of Windows 7 Home Premium upgrade and do a custom install on your current installation disk.

  Because Windows 7 is in limited stock because Microsoft ended sales in October 2013, this created demand due to its rarity. This means the retail boxed copies request a bonus, while the OEM System Builder copies remain affordable.

  Full version (retail):

  -Includes the rights of transfer to another computer.

  -Does not require a qualifying earlier version of Windows.

  -Expensive

  Upgrade version (detail):

  -Includes the rights of transfer to another computer.

  -require a qualifying earlier version of Windows.

  -Expensive, but less expensive full version

  OEM System Builder version:

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  There is nothing wrong to use it too, especially that all future versions of Windows will be full versions.

  Where can I still get Windows 7?

  Full version-

  Microsoft Windows 7 Home Premium

  Full version-

  Microsoft Windows 7 Ultimate

  Full version-

  Microsoft Windows 7 Professional

  Version upgrade-

  Microsoft Windows 7 Professional upgrade

  Version upgrade-

  Microsoft Windows 7 Ultimate Upgrade

  Version upgrade-

  Microsoft Windows 7 Home Premium Upgrade

  Family Pack:

  Microsoft Windows 7 Home Premium Upgrade Family Pack (3 users)

  How to do a custom installation

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows 7 click Next.

  You will receive the following warning:

  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• "ProviderChangeSupport" refreshes the issue in the user interface

  Hello

  I am facing problem in refreshing the listview in the amx MAF page.

  behavior in my application is below:

  -> Initially I displays all records in the list view.

  -> at the top of the page, I have a search field, while I'm looking is not refreshing the user interface for the first value listed as (value = 100), if I change the value of research to the other like(value = 101) it is refreshing the user interface. And then if I search with another value as (value = 103) is not refreshing the user interface and if change value again into different as {value = 104 (not 103)} it is refreshing the user interface.

  Kindly help me on this how can I solve this problem. I can't understand the question.

  code is like:

  in the DC class:

  transitional protection ProviderChangeSupport providerChangeSupport = new ProviderChangeSupport (this);

  private PropertyChangeSupport propertyChangeSupport = new PropertyChangeSupport (this);

  {} public void addProviderChangeListener (ProviderChangeListener l)

  providerChangeSupport.addProviderChangeListener (l);

  }

  {} public void removeProviderChangeListener (ProviderChangeListener l)

  providerChangeSupport.removeProviderChangeListener (l);

  }

  {} public void setBook (book)

  Book oldBook = this.book;

  This.Book = book;

  propertyChangeSupport.firePropertyChange ("book", oldBook, book);

  }

  public book getBook() {}

  turn the work;

  }

  public BookDC() {}

  Super();

  findAll();

  }

  book private;

  private list books = new ArrayList();

  private map BookAdapter = new BookAdapter();

  public book [] getBooks() {}

  findAll();

  return (Book []) books.toArray (New Book [books.size ()]);

  }

  {} public void findAll()

  Whole BookId = null;

  Object obj = AdfmfJavaUtilities.getELValue("#{pageFlowScope.bookId}");

  If (obj! = null)

  bookId = new Integer (obj.toString ());

  Books = adapter.findBooks (ID);

  providerChangeSupport.fireProviderRefresh ("books");

  //        try {

  Thread.Sleep (1000);

  } catch (InterruptedException e) {}

  //

  //        }

  AdfmfJavaUtilities.flushDataChangeEvent ();

  }

  Thank you

  Rita

  Hello

  at first glance, it seems to me that there is a problem in your code; in the method "getBooks" you call "findAll", and in the latter, you trigger a refresh of the provider. The refreshment of the provider calls internally "getBooks" method to update the data of the user interface. So here you have some kind of loop. You can debug and see if this is what is happening. "getBooks" should have only the return line.

  If this does not resolve your problem, you may show your amx code to see how you manage the search field.

  Kind regards.

• Refresh issue seen to materialise

  Hello

  I have a materialized view that is updated 4 times a day with data from a table that has a more than 10 million documents.

  I only need the data in the table past six weeks each time it updates. I do a complete refresh of the view materialized as follows:

  < code >

  Create materialized view cv_six_weeks

  compress the nologging base

  tablespace cv_data

  complete refresh on demand start with sysdate + 0 following (sysdate + interval from 7:00 ' hour to minute) using apply constraints disable query rewrite

  as

  Select * from cv_all_data

  where cv_date > = add_weeks (sysdate,-6)

  < code >

  Is there a less complicated method where I can drop the oldest goes back and add only the latest dates without doing a full sweep of the table again?

  Thanks for the help,

  -Abe

  Only inserts are going to the source table. It is a destination for all the log data. The MV is just for the capture of the most recent data. The most recent 6 weeks of data to be exact.

  I like the idea of partitioning. I'll talk to our database and see if it's something that my problem will be solved.

  Partitioning is probably the most effective solution if you can do it.

  That would eliminate the MV and the four daily updates for it. Your loading process would simply make BULK inserts in the main table using a DATE representing the day value here.

  You can easily redefine your existing table to be partitioned and use the partitioning of the INTERVAL if you want to automatically create new partitions each day.

  DROP TABLE SCOTT. PARTITION_DAILY_TEST CASCADE CONSTRAINTS;

  CREATE THE TABLE SCOTT. PARTITION_DAILY_TEST
  (
  ID NUMBER (10),
  MY_DATE DATE
  )
  PARTITION BY RANGE (MY_DATE)
  INTERVAL (NUMTODSINTERVAL(1,'DAY'))
  (
  P_EXISTING_20120401 PARTITION VALUES LESS THAN (TO_DATE (' 2012-04-01 00:00:00 ',' SYYYY-MM-DD HH24:MI:SS ',' NLS_CALENDAR = GREGORIAN '))
  );