issue of HTML 5 Player audio playlist (bootstrap)

Similar Questions

• Flash Player audio is all distorted and scratchy other audio works fine

  Flash Player audio is all distorted and scratchy other audio works fine, I uninstalled Flash Player 8 times and reinstalled. When Flash Player has been uninstalled I did a search for flahplayer files left behind a there were approximately 8-9 files there. I don't know if they can be deleted, so I left them alone. QuickTime audio works great as windows audio system.

  You can try to use a system restore to before installation of the updated flash version.
  http://support.Microsoft.com/kb/306084

  To uninstall flash completely, you can use the uninstaller here: http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-windows.html

  Just a thought... you try to read something that already worked? It is possible to what you are listening to is bad.

• Videos YouTube does NOT play if media.mediasource.enabled is set to true (Youtube with HTML 5 Player). WHY?

  When you watch videos on Youtube, I use the new HTML 5 player. It works fine when media.mediasource.enabled is set to 'false', but then I can't have the full experience because that lack of features!

  If I let no. video will load, which means that I can't watch any video on Youtube!
  As a solution, I installed the Plugin "Youtube Control Center" (missing in the list below). But it would be nice if I don't use this...

  Even better would be if Firefox would be supported WebM. But this doesn't seem to be the case since YT uses exactly this Format with its new player... (And if I activate this media.mediasource.enabled (put "true") nothing works more.)

  Firefox plays the 'old' WebM format in its default configuration (media.mediasource.enabled = false). You can check it out here: http://www.webmfiles.org/demo-files/.

  What I've read, turn on MediaSource will allow you to play the "new" WebM on YouTube from Firefox 31. Even if preference exists in Firefox 30, I don't think that the actual code is there, which would explain why this ability to YouTube advertising causes the blackout.

  See: http://www.ghacks.net/2014/05/10/enable-media-source-extensions-firefox/

• How to make a Player audio html5 can be used since a .psd

  Let's say I have a .psd of an audio player model. How can I do that in something I can use as a Player audio html5 that I can put in my site?

  Tutorials, videos, tips, links to all sites welcome!

  My advice would be to dissect an existing audio player to see how its code. For example, the Wimpy Player skins are created with a LOT of CSS code and only has very few images.  For reference, look at online skin clothing Wimpy and this link: http://webdesign.tutsplus.com/tutorials/create-a-customized-html5-audio-player--webdesign-7081

  Nancy O.

• Audio player with playlist

  I need to create an application that has a bunch of mp3s embedded and display correct playlist and player. Is it possible to do this with an application completely offline? I can't find anything like this in a free html format, and I don't want to pay for something that I won't be able to use. Any guidance would be greatly appreciated. See you soon.

  I'm fighting a period, so I can't have a real answer for the moment, but just to give you an idea of how this works.

  1 make. you a page Web in HTML, using whatever program you want, either dreamweaver or Notepad or muse or other.

  2 you're indesign doc, draw a box about the size of your Web page to contain your Web page.

  3. in the overlays Panel folio, choose content web and that points to the file with the html file (everything in this folder will be added to your folio file, so make sure that only you need is in this folder, there should be a separate file of all the other stuff for your document)

  4. set your options, whether you want autoplay checked, etc.

  Thaat should be.  So I think the hardest part for you is going to be the html code.  Try w3schools.com.  or these tutorials on lifehacker could also be useful...  http://Lifehacker.com/5974605/learn-beginner-and-advanced-htmlcss-skills-for-free

  Good luck

  Joe

• Windows Media Player-how do I print a CD label for the audio playlist

  Windows media player how

  How to print a CD label for the playlist that I burned? I was not able to find a way to do it. I do not painfully a label using MS word. There should be a way to copy it and print it.

  You can export the play list to Word with the exporter of Info Media plug-ins, which is part of the WMP9 series Winter Fun Pack 2003: http://www.microsoft.com/windowsxp/downloads/powertoys/wm_winterfun.mspx (do not worry about the label 'WMP9 Series', the plugin still works fine in newer versions).

  To export the playlist, select the playlists in the left sidebar of WMP, right-click the playlist and select send to - Media Info exporter .

  Tim Baets
  http://www.BM-productions.TK

• Need help to integrate a swf to mp3 player with playlist xml

  Im a noob to Flash (began Tuesday, haha) and so far all that comes along very well, but I need to put music in the swf file. I have a set button in place that slips a swf mp3 player in the side, but I don't know how to make the playlist to work with it.

  The player is from this site:

  http://www.bezzmedia.com/swfspot/samples/Flash8/Mp3_Player_with_XML_Playlist

  Using the list of reading xml with html is fairly simple, but I'm not sure using it with Flash Catalyst. Is there an easy way to do this?

  My original plan was to have a text list of songs with a play button next to each of them, and then when you click on the play button it would create the State of all the other songs on blocked for you can choose just what would stop the song playing and if another song he played. I'm not sure how to do it anymore (as I said, I started to learn this week), so I just tried to incorporate someone else (ugly) mp3 player.

  Anyway, if someone knows a way relatively easy to have a playlist in my swf file please let me know. Thank you!

  If I understand you correctly, you have imported a SWF file in catalyst use of illustrations to import on the file menu. When your application runs, you want to pass this swf that tells it what URL to read a file of the parameter data. The file SWF don't is not one you have created, on the contrary, you got a web site.

  This isn't something you can do in catalyst. However, it should be possible to do it in Flash Builder. I found an article in several ways to do it, to http://www.actionscript.org/forums/showthread.php3?t=175951. One idea is the following snippet

  
      import flash.events. *;

  private void setVars (event): void
  {
         
  Event.Target.Content.yyyyyy = "zzzzzz";
  }
  ]]>
  
  

  where "xxxxx" is the path of the SWF file (you can put it somewhere in your Flash Builder project, or reference it via a URL), yyyyy is the name of the parameter that awaits the SWF and zzzzzz is the path to the data file. Thetag, it's what catalyst created when you imported the SWF file. (btw.the Image and SWFLoader tags are almost identical).

  I hope that gives you enough information to move forward.

• Problem with Windows Media Player Audio sync DivX playback in full screen

  Hello

  I have found lately that when playing videos on Windows Media Player divx mode full screen audio is out of sync.  If the video is played in window mode, there is no problem.  I had no such problem in the past, but now for about 1 month or so, I have this problem.

  I have fitted iq508a to vista 64-bit, with the latest drivers delivered HP installed (using the HP update utility)-does anyone else have this same problem too?

  Thanks in advance

  Jim

  Laptop HP ENVY 17-j005tx, HP ENVY 27 - k001a, HP ProLiant MicroServer Gen8 G2020T, HP MediaSmart EX495 Server tilt, HP MediaVault 2020, HP ENVY 120 AiO Printer

  I can't believe! I solved the problem with this problem of video audio sync during playback in full screen!

  While watching the Pineapple Express, I thought WTF I'll take another closer look at this, and while they were smashimg their cell phones so that they could not be found by triangulation, (don't ask - u just I have to watch - stoner movie )...

  in any case, I looked under tools options in WMP.  I unchecked the option on the performance tab "use video smoothing"-the video as reloaded and bingo! everything in harmony!

  BTW, I checked my another PC running Vista 32 bit and the option ' use video smoothing ' also exists and it is checked if this seems to be a problem with WMP works on Vista 64 bit or running desktop Touchsmart of WMP... In case I am much happier now...

• Error setting output Satellite A300-1jh - Toshiba HD DVD Player - audio

  I have a problem! When I try to play a dvd on the toshiba hd dvd player its gives me an error message saying "an error has occurred in the audio output settings. Please check audio driver is set up correctly. »

  I read a similar thread on this forum in which it is said that I should install the latest version of the Reader 4.51.07! I installed it, but the message keeps coming back! I have windows vista ultimate 32 with all updates! What do you think I should do? Thank you.

  PS: I have a satellite a 300 (psagle) 1jh

  Post edited by: petrutjim

  Hi mate

  I found this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=162772

  He's certainly the same question as in your case and the solution was a DVD player patches installation or installation of new full HD DVD player.

  Notes; the Vista should be also updated!

• Issue of HD Codec IDT Audio Glitching

  I just purchased a DV7 4045ea and have had many problems with the sound, causing usually skip and stutter in Skype/ventrillo and games (and including Starcraft 2). These requests when jumping and stuttering occurs it causes a massive load on the processors at the same time. Skype/vent is similar to CD audio to skip. In games (sc2 is my main game) the result is a stuttering game when an audio effect is read, if I turn off the music and effect of the background of the problem are less frequent. If I play music the game stutters all the time.

  In fact, that Norton has reported several times that anything that uses the audio device is causing excessive load on the processors, as well as audiodg (google, a lot of probs with her new vista) was once a cause of the load.

  Now, it's interesting, if I play SC2 tab on so he always plays to the screen (ie the lappy still plays the graphics and game engine) but the audio is not, the processors in charge going straight down.

  I did regular proposed tasks are:

  Updated all drivers through HP assistant

  Manual update of windows and the device drivers audio BIOS and graphics card.

  Disabled the sound improvements on reading devices (which was a common problem in Vista)

  Restore audio drivers (currently my system has all the latest however)

  The returned driver updates now seemed have aggravated the issue! Even if I use SC2 for example, please note this happens with another application its just SC2 is the easest for me reproduce the problem on.

  After that some research it seems that a lot of people with the IDT audio device high definition have similar problems. One common difficulty is to allow windows to use the generic drivers. However if I remove the driver, windows just reload the IDT codec, if I stop my just audio devices are not recognized. If this can be the solution for me or not is another issue, I suppose.

  Please, if anyone can help can they advise me because its makes me round the twist! I feel aggrieved that a laptop computer £ 1000 performs worse than my old man of 300 pounds (who plays SC2 and aeration/Skype with problems what so ever).

  The one who can get me a fix wins a bar free March!

  Here is my FYI dxdiag report

  Time of this report: 10/24/2010, 21:28:36
  Computer name: DAVID-PC
  Operating system: Windows 7 Professional 64 - bit (6.1, Build 7600) (7600.win7_gdr.100618 - 1621)
  Language: English (regional setting: English)
  Manufacturer: Hewlett-Packard
  Model: HP Pavilion dv7 Notebook PC
  BIOS: Default system BIOS
  Processor: Intel Core i7 CPU Q 720 @ 1.60 GHz (8 CPUs), ~1.6GHz
  Memory: 4096 MB RAM
  Available OS memory: 4030MB RAM
  Page file: 3396MB used, 4660 MB of available space
  Windows Dir: C:\Windows
  DirectX version: DirectX 11
  DX setup parameters: not found
  DPI setting: Using System DPI
  System DPI setting: 96 DPI (100%)
  DWM DPI Scaling: disabled
  DxDiag Version: 6.01.7600.16385 64 bit Unicode

  @ All users who have dv7 - model 4000 series

  Hello

  Please try solution that is posted in this topic and report on results.

• Books on my mp3 player audio not say they are already in MP3 and will not sync

  I try to add the 17 CD to an audio book to my mp3 player, but windows media player says that it is already on my mp3 player, AND IT IS NOT. Thus, it will not synchronize this CD on my MP3 player.  Any ideas or suggestions?

  Delete the mp3 player and try again

• Windows media player 10 playlist order mutation during synchronization

  V10 of WMP on XP SP3

  I have my songs in my playlist, but when I sync them with my MP3 player, they come out in a completely different order.  For example I have songs in order in a playlist:

  1

  2

  3

  4

  5

  But when synchronized

  3

  2

  5

  4

  1

  Same problem for every playlist regardless of their size. Shuffle is not lit on WMP.

  At first I thought that the problem was with my MP3 player.  It's a Sony NWZ - W252 (B).  I formatted and reset It has always worked well, the same order as WMP playlists.  Shuffle is not turned on the MP3 player.

  I did a test, I made a copy the same playlist but revised the order of song to what order out on the mp3 player after synchronization.  When I synced playlist changed, it not reorganize itself, he remained the same order as the original after synchronization, as if the songs have some fixed order.  But there is no logic in the order that the songs themselves in arranged after syncing, I compared the sort order of the options and file size but no match, so it has nothing to do with the size of file or sorting.

  This problem just started to happen suddenly and without reason, I have not installed/uninstalled/improved/changed anything.  One day it was working fine, the other the problem started.  The only thing I noticed at the time was that Norton has found an infected file and instructed me to delete what I did.  So unless my WMP is somehow damaged by a virus.

  I considered uninstalling and reinstalling WMP but I don't want to lose anything... I'm not sure if I could import it back all my music files? and if I have to reselect the location of each file that would take forever.

  It was my MP3 player, I had to keep me pressed a button on my MP3 player instead of simply pressing it... silly.

• Windows Media Player-audio and video freezes during playback

  FREEZE AUDIO AND VIDEO IN WINDOWS MEDIA PLAYER OR VLC MEDIA PLAYER

  FREEZE AUDIO AND VIDEO IN WINDOWS MEDIA PLAYER OR VLC MEDIA PLAYER WHILE THAT WATCHING VIDEOS.  WHEN THE IMAGE AND THE SOUND HANGS, THERE IS A DULL NOISE.  THIS FREEZING HAPPENS ON EVERY MINUTE OR SO.  THAT HE IS PAST JUST STARTED ABOUT 3 DAYS AGO.  BEFORE THAT ALL WAS WELL WITH THE PC AND WATCH VIDEOS.  I RUN A FULL WITH MICROSOFT ESSENTIALS SCAN AND SAYS THAT SOME THREATS NOT FOUND.  I REBOOTED, DEFRAGGED, REMOVED THE POWER CORDS, ETC. WITHOUT SOLUTION.

  PLEASE ME TELL HOW I CAN STOP THIS PROBLEM?

  FREEZE AUDIO AND VIDEO IN WINDOWS MEDIA PLAYER OR VLC MEDIA PLAYER WHILE THAT WATCHING VIDEOS.  WHEN THE IMAGE AND THE SOUND HANGS, THERE IS A DULL NOISE.  THIS FREEZING HAPPENS ON EVERY MINUTE OR SO.  THAT HE IS PAST JUST STARTED ABOUT 3 DAYS AGO.  BEFORE THAT ALL WAS WELL WITH THE PC AND WATCH VIDEOS.  I RUN A FULL WITH MICROSOFT ESSENTIALS SCAN AND SAYS THAT SOME THREATS NOT FOUND.  I REBOOTED, DEFRAGGED, REMOVED THE POWER CORDS, ETC. WITHOUT SOLUTION.

  PLEASE ME TELL HOW I CAN STOP THIS PROBLEM?

  =======================================================
  It might be worth a try to do a system restore in time before the beginning of the question.

  (306084) how to restore Windows XP to a previous state
  http://support.Microsoft.com/default.aspx?kbid=306084

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Windows media player audio fades in and out, how can I solve this

  Windows media player

  Hello thunderstone1,

  ·         Since when are you facing this problem?

  ·         Have you made any recent hardware or software on your computer changes?

  I suggest that you run the Fix - it who will diagnose and repair problems with the noise and Acoustics:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-in-Windows-Media-Player

  You can also read the article that talks about solving Audio problems with Media Player:

  http://Windows.Microsoft.com/en-us/Windows-Vista/play-an-audio-or-video-file-frequently-asked-questions

  Thank you

  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think

• Window Media Player - print playlist / cannot burn CD playback.

  I use Window Media Player-how can I print a playlist I created. I can't copy in MS Word for example. Also when I burn a CD, it will play on my computer but not my home CD Player - how do I fix this? Thank you

  Hello

  Step 1: To print a list of created play in Media Player, you will need to use a third party software. Online search using your favorite search engine to get it.

  DISCLAIMER of THIRD PARTY SOFTWARE: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Step 2: If you burn a disc of data with music files and does not have in your mobile, home, or car CD player, check the following:

  ·          Your CD player may not support playback of CD or data DVD discs. Refer to the documentation for the CD Player for more details.

  ·          The CD can be burned to media, such as CD - RW, which is not compatible with the CD player. Refer to the documentation for the CD Player for more details.

  ·          Your CD player may not support playback of the type of music files burned on the disc (WMA or MP3). Refer to the documentation for the CD Player for more details.

  ·          The songs may be protected by copyrights. Other computers may be able to acquire usage rights and play the songs if they have a connection to the Internet, but devices such as radio cars and portable CD players will not be able to acquire these rights, so protected content will be unplayable.

  ·          The CD cannot have been closed when it burned. You can usually solve this problem by adding more songs to the burn list, then you are close to the maximum capacity of the CD. Then, try to burn the list again for a new CD.

  See: http://windows.microsoft.com/en-US/windows-vista/Burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions