Issue of "PCI simple communications controller" infamous with Acer laptop
So, in a few words, the computer does not recognize the usb flash drives. On every attempt to connect the device, the sounds "connect device" is played and about 3 our 10 times the "driver installation failed" message from Windows. In Control Panel, area of devices, the flash disk is marked as 'usb 2.0 device' in the category 'unknown '.
With the help of 3rd party software, the popular "unknown device identifier", "chipset Intel 7 series c216" were found in need of a driver. The WinUSB generic driver always worked perfectly for me on any machine up to now, well well so far, at least, so I install the supplied driver of Intel would be useless because I have not any usb 3.0 devices. I went down of Windows 8 (which was already installed on the computer acquisition) to Windows 7 for personal reasons, the funny thing is that I installed it with a digital copy through the flash disk usb that I try to open right now, by way of conclusion, the fault must be on the software.
My mouse works perfectly, be connected via a usb port, I even tried with the keyboard that I use for my desktop pc and also works.
So here are the things I tried and had no results:
-possibility to install the driver automatically with Windows Update (1st attempt failed to find; 2nd attempt, driver is found BUT access is denied)
-J' have that maybe if I uninstall the driver from "Device Manager", after a Windows restart should re - automatically installs the driver, but as above the same message "access denied."
-Downloaded the Intel driver (ME 9: engine management pilot), with the error "failed to install".
Is there a way to solve the problem of "access denied" so that Windows Update can take care of things? Or am I left with the only option of re - install everything again hoping that everything will work?
Details:
Windows 7 x 64
Laptop model: Acer Aspire E1-531 (link to the form: http://www.acer.co.za/ac/en/ZA/content/model-datasheet/NX.M12EA.009)
utilities of "driver finder" 3rd party frequently to be wrong and should be avoided, cleaning after a 'bad' driver installed can often lead to problems. You have available restore points?
The USB 2 driver will be a part of the Chipset Intel package. Re download all the Acer drivers and install their drivers only when possible. Laptop manufacturers often use updated implementations of standard chipsets and their drivers that will take into account.
Even if you do not use USB 3 devices, you should always install the necessary drivers to allow Windows to correctly list the material. Although the PCI Simple communication driver is often associated with the chipset Intel HECI/AMS-SOIL Management Engine, this device is not listed by Acer. It is also common with an analog modem.
Tags: Windows
Similar Questions
-
Problem with "PCI Simple Communications controller" driver in inspiron n5010
Hello
As a first step to apologize for my bad English
After installing Win7 Ultimate 32 bit on my inspiron n5010 I installed all the drivers and components are working properly, but one of the devices have problem because I can not find the drivers for it. This device is "PCI Simple Communications controller" and he scored in the device with the yellow symbol Manager and button update driver in Device Manager does not work for this.
How to find the driver for this part of my laptop?
Thank you
Hello
You can also download it from dell.
N5010--> chipset--> Inter Management Engine Interface Driver
If you see the version of the file. you will see that it supports windows 7 32-bit ultimate too.
-
Problem with PCI Simple Communications Controller
Hello dear team of HP, I have laptop Hp Pavilion dv6, QJ920AV product number #AVA, 2CE14601BD.
So, I can't find a solution for PCI Simple Communications Controller driver missing. Can you help me, please...
Hello:
Here is the link for the driver you need for PCI of Simple Communications controller:
-
Driver error issues "PCI Simple Communications controller has not a driver"
I am trying to connect my printer, an hp deskjet 2050 printer, but I get the message that PCI Simple Communications controller does not have a driver and PCI Serial Port doesn't have a driver... what should I do?
William
Go to HP and download the driver, then install it.
Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should helphttp://captaindbg.com/how-to-update-drivers-on-Windows-7/ (also works on Windows 8) -
HP ProDesk 600 g: PCI Simple Communications Controller
Have just reinstalled Win 8.1 X 64 on my system after replacement of H/D using HP provided disks. Noticed I had three errors re no driver installed. Resolved to the third question but have tried various links on the forum but with no joy re these detailed below. Someone at - it an idea. Concerning
PCI Simple Communications controller
Device PCI VEN_8086 & DEV_8C3A & SUBSYS_18E7103C & REV_04\3 & 11583659 & 0 & B0 has been configured.
Driver name: null
The class GUID: {00000000-0000-0000-0000-000000000000}
Driver date:
Driver version:
Driver provider:
Section of the driver:
Rank of pilot: 0x0
Matching device ID:
Advanced driver:
Update of the device: falsePCI serial port
Device PCI VEN_8086 & DEV_8C3D & SUBSYS_18E7103C & REV_04\3 & 11583659 & 0 & B3 has been configured.
Driver name: null
The class GUID: {00000000-0000-0000-0000-000000000000}
Driver date:
Driver version:
Driver provider:
Section of the driver:
Rank of pilot: 0x0
Matching device ID:
Advanced driver:
Update of the device: falseThese devices are part of the functionality of 'Remote Management' - a system centralized on a corporate network administrator can access the computer and make updates.
Did you run the "HP Support Assistant"?
He should find the missing device drivers of "AMT".
Of course, if you are the only 'administrator', there is no need to install support - your computer will work fine without it.
-
HP Compaq DC5800: No. - Pci simple communication controller
All hell
After doing some maintenance my device manager is displayed.
PCI simple communication controller
The drivers for this device are not installed. (Code 28)
There is no compatible driver for this device.
PCI bus 0, device 3, function 0
PCI\VEN_8086 & DEV_29D4 & SUBSYS_281E103C & REV_02
PCI\VEN_8086 & DEV_29D4 & SUBSYS_281E103C
PCI\VEN_8086 & DEV_29D4 & CC_078000
PCI\VEN_8086 & DEV_29D4 & CC_0780
I worked the last time I did the maintenance
I tried pilot different analyses and the results are not new drivers needed.
I also looked at the count with the same results.
Thanks in advance
Hello:
You need the driver for this device...
This package contains the device driver Intel Active Client Manager Host Embedded Controller Interface (HECI) for desktop models and operating systems supported.
-
I can't find the driver for my PCI simple communication controller that is compatible with 8.1 64-bit windows. could someone point me in the right direction (if all goes well a link to the driver I need)? I have already spent a lot of time to research.
As I wrote above... If automatic installation method does not work, you must manually install the driver.
Here's how to manually install the driver...
Go to Device Manager and click the controller of simple communication IBOS who need the pilot.
Click the driver tab. Click on set to update driver.
Select her browse my computer for driver software option and navigate to the folder of the driver that was created when you ran the file.
This file will be located in C:\SWSetup\sp34743.
Make sure that the include subfolders is selected and the driver should install.
Then restart the PC.
-
I recently updated my system to Windows 7 Pro 32 bit for Windows 7 Pro 64 bit. The Simple communication controller has no drivers installed.
The problem is:
PCI Simple Communications controller
PCI\VEN_8086 & DEV_29D4 & SUBSYS_281E103C & REV_02\3 & 21436425 & 0 & 18
The drivers for this device are not installed.
I checked the downloads at HP and either they don't accept Windows 7 Pro 64 bit or not suitable for this machine.
I tried several internet solutions and they failed.
My computer is a HP Compaq dc5800 microtower
REF: KA435UT #BA
SN: [personal information]
Any help with this problem would be greatly appreciated
Hello:
You need this driver...
-
Satellite C850 - PCI Simple Communications Controller
I just bought this new C850 Satellite but with no OS on it, then I installed windows 7 ultimate x 64 and all the drivers but in my device manager there is an unknown device its called controller PCI of communication Simple
and its hardware ID are
PCI\VEN_8086 & DEV_1E3A & SUBSYS_FB311179 & REV_04
PCI\VEN_8086 & DEV_1E3A & SUBSYS_FB311179
PCI\VEN_8086 & DEV_1E3A & CC_078000
PCI\VEN_8086 & DEV_1E3A & CC_0780Please someone help me :) it is what?
PCI Simple communication controller is Intel AMT (Intel Active Management Technology) or Intel Management Engine Interface
Both can be downloaded from the Intel page.
The Intel Management Engine Interface are also on the page of the Toshiba UE driver -
Ethernet controller, PCI Simple communications controller and for desktop sm bus controller
Hello
I'm having a problem with the following drivers after installing windows 64-bit edition Home premium. I shared the ID of material for them.
Controller 1) Ethernet
PCI\VEN_8086 & DEV_1503 & SUBSYS_20178086 & REV_05
PCI\VEN_8086 & DEV_1503 & SUBSYS_20178086
PCI\VEN_8086 & DEV_1503 & CC_020000
PCI\VEN_8086 & DEV_1503 & CC_02002 PCI Simple communication controller)
PCI\VEN_8086 & DEV_1C3A & SUBSYS_20178086 & REV_04
PCI\VEN_8086 & DEV_1C3A & SUBSYS_20178086
PCI\VEN_8086 & DEV_1C3A & CC_078000
PCI\VEN_8086 & DEV_1C3A & CC_0780SM Bus controller 3)
PCI\VEN_8086 & DEV_1C22 & SUBSYS_20178086 & REV_05
PCI\VEN_8086 & DEV_1C22 & SUBSYS_20178086
PCI\VEN_8086 & DEV_1C22 & CC_0C0500
PCI\VEN_8086 & DEV_1C22 & CC_0C05Hello:
You did not mention which version of the operating system (XP, Vista, W7)?
One needs drivers Intel gigabit network.
The other requires the Intel Management Engine Interface driver (or the driver HECI).
The last one needs that you must first install the chipset driver.
If you provide the complete model of the PC in question and the operating system, I'll be happy to post the links for these drivers for you if you don't know where to find them.
-
PCI simple communications controller driver hp dc5800
error message:
PCi simple communication controller
The drivers for this device are not installed. (Code 28)
There is no driver selected for the item or a set of device information.
found the answer:
You need to install the HECI of 32-bit driver that is not listed in the W7 to your PC download page.
But the link does not work
Not the product you are looking for? If you can't find your product on this site, go to theCentre de Support HP - Hewlett Packard Enterprise .
Hi, @gm114 :
You need this driver, like the one you need for your specific model is missing from the support dc5800 page.
HP has some major problems with the support pages they know but are moving at a snail pace to fix.
In fact, a snail is faster, because from what I've observed, they have done nothing to solve the problem up to now, after more than a month.
-
PCI Simple Communications Controller driver for HP-Compaq dc5800 SFF
In the device, other devices shows yellow exclamation with PCI Simple Communications Controller Manager.
I found a few references to care packs, but none that really meet this model and the OS which is Windows 7 Enterprise 32-bit Edition.
If you select the download button, it seems that here, the connection cannot connect to the FTP as happens with errors of popup like 425 can't open data connection.
So two things has driver and is there a http download?
Thank you
Paul_Tikkanen wrote:
Hello:
You need to install the HECI of 32-bit driver that is not listed in the W7 to your PC download page.
Thanks that solved the problem of missing driver.
Had to download off site due to firewall blocks FTP. But as an alternative would download flow anyway.
-
Driver missing for PCI Simple Communications Controller for U41
I have a problem with a driver for PCI Simple Communications Controller for U41. Please help for the best solution thanks
Good day and welcome to the community.
This is usually resolved by installing the Intel Management Engine Interface package.
Please take a look at the pages of resources of your machine, under the section of Chipset :
http://support.Lenovo.com/us/en/products/laptops-and-netbooks/u-series/U41-70
I don't know if there are also the Serial i/o package.
I hope this helps a little.
Kind regards.
-
Device unknown controller - PCI simple communication controller - network of HP Pavilion DV6
Sorry if this is posted in the wrong category...
I've never met such a headache, try to reinstall the drivers for your laptop. Not to mention the research to find just a PORTABLE THAT I WORK.
This series #[number of Series edited by Moderator] brings me to this page.
I downloaded and installed, reinstalled, removed and installed again ALL OF THE DRIVERS listed here for my client DV6. Nothing works. I tried to just about twelve to fifteen different downloads and triumph have missed.
NOW -.
Since then, I have installed the driver on this page - (being the closest match to my client machine)...
.. alert 'Network controller'.the (yellow bang icon) in Device Manager disappeared, but wifi still not working...
is there a driver to enable the function keys work? In the past, I found that enabled me to turn on the wireless on the machines of other manufacturers.
also - the Device Manager alerts me that I need drivers for "PCI simple communications controller" and some "unknown device".
I'm looking for with the bad run?
support is interrupted for this model (under 5 years)?
is this an easier solution than I expected?
Thanks
Hello:
It is indeed the support page and driver for the product number you posted.
http://h10025.www1.HP.com/ewfrf/wc/product?cc=us&DLC=en&LC=en&OS=4063&product=5094557&sw_lang=
You need this driver for PCI simple communication controller:
You need this driver for the unknown device, probably. Without the hardware ID, I can only imagine on that one.
This driver is not on this support page.
There is software to work the Fn Keys... this a...
-
TravelMate x 483 PCI Simple Communications Controller driver for windows 8 pro
Can someone give me a link to solve my problem of device PCI Simple Communications Controller driver? I use Windows 8 pro. Thank you
This isn't a driver that should be necessary on this system.
If you are upgrading Windows 7, it should have pulled the driver from 7 or installed in native mode.
If you have a system with Windows 8 natively, it should already be there.
If you have the Recovery Manager, you install all the drivers and applications from there.
Otherwise, I will propose to restore the system to factory settings.
Please see this link:
http://community.Acer.com/T5/community-KB/reloading-your-Acer-computer/Ta-p/45793
Maybe you are looking for
-
21.0 Firefox does not work with Barclays Online Banking
The site opens and displays the account balance. When I go to account details, Firefox crashes.I deleted the cache and deleted cookies, as suggested - but it does not work.Barclays online banking works very well using Google Chrome as a browser.
-
Stop: 0x0000008E (0xC0000005, 0x805678A0, 0xEDE28CA8, 0x00000000)
I was browsing the internet and nowhere a blue screen appeared in front of me and this displays exactly: Make sure you have enough disk space. If a driver is identified in the stop message, disable the driver or check manufacturer updates the driver.
-
How can I leave my mail on the pop server 'Windows Mail'?
My problem is that I use "Windows Mail" for my emails. When I read an email and close it (without deleting), he left Windows Mail automatically and in my Yahoo Inbox. He must remain until I remove it manually. Then, when I remove Windows mail, it mus
-
HP Pavilion G6 of heating like crazy
Hello. 2 years ago I bought a laptop HP Pavilion G6 with a local distributor in Romania and noticed that the laptop heats up like crazy in the left side. I can't keep it even on my knees because it literally Burns me. When the laptop was still in the