Issue to the PPR calling event where it deposits the validation of the page

Similar Questions

• I want to put the previous issue of the page and the current page number in a single ex page.  6 / 7

  I want to put the previous issue of the page and the current page number in a single ex page.  6 / 7

  Hello

  Is that what you want?

  

• Issue of the page actions

  I have some questions of action when clicking on the pages in the front of the Panel. Given that the program is too complicated, I use a simplified to ask for help.

  As you can see in this photo, I have 3 pages. In this third page, I can click on "Start the light" button to turn on the light. What I want is to achieve the function of the following

  (1) for another button ' reset and exit page 3. What I want, it's "when click on this button, the main while loop will turn." At the same time, the façade shows page 1 or page 2, that something is OK but not page 3.

  (2) If, on page 3, is on, if we do not click this button 'Reset and exit the page 3', just click page 1 or 2, there will be a dialog box coming out to say 'Please reset system first before going to the others '. And it keeps the façade on page 3.

  Could someone advise me how can I implement these two functions? Thank you very much!

  ""

  -Some recommendations:

  -Check your stop condition, if you are using events is not a good idea to use the stop outside the structure of the event (you can include an event to stop execution).

  -Avoid using local variables. They are not necessary in this case. You can set the default value of the light to false by right-clicking > data operations > current default value.

  -To exit a page, you can use a node property to set the value to 1 for example page.

  -To avoid to go to page 1 or page 2 when the light is on, you can use a property node to make them invisible.

  -Here's a hint to manipulate the pages individually:

  

• Performance issue on the page size for CARS

  The cluster we use 8 k page size and a 24 GB RAM under windows 2003.
  
  We have read on the site of Don Burleson, "for optimum performance, the size of the page on an oracle cluster should be 4 k. Is this right statement, Oracle cluster have better performance with 4 k pages.
  
  Thank you

  read this on metalink: using large memory on 64-Bit Windows systems ID 422844.1 Pages

  then decide for yourself.

  Published by: Paul R @ NL February 9, 2010 02:49

• How to make all the pages of a PDF form of several page to print in older versions of the reader?  Player 11 prints all; 10 player skips the first page

  I'm new to creating forms, please excuse my ignorance. I created a form of the 9 page in InDesign on Mac OS 10.6.8 CS6 and exported as an interactive PDF. With Acrobat 10.1.10 I checked that there are no security - everything is allowed. None of the fields on form is required.  I initially had some fields mandatory but is not necessary to see if my printing problem would go.  I activated the extension which allows versions of reader before 11 to save data in the form. Page 1 has fields drop down list, radio buttons, a "submit" button and text fields.  The rest of the form has boxes option and text fields. Some of the people who have tried my form will say that they can print pages 2 through 9, but not on page 1. One of them is known to use Reader 10. I tried to print my form with Reader 11 on Max OX 10.6.8 and Reader 11 on Windows 8.1 and haven't seen any problems printing. What have I done wrong?  Is there something on the submit button on page 1 that made old versions of the drive do not want to print this page?  There is nothing of propriety or sensitive on the form, so I'll leave it for awhile in Dropbox, where someone is willing to inspect it.  It is to

  https://DL.dropboxusercontent.com/u/87784382/Savable_Local_Show_Report_2.PDF

  I was able to find someone willing to do tests that I can not do without having to install older versions of the player on my computer.  The surprising (to me) the result is that the button submit the cause of the problem.  Simply removing the button submit, Reader 10 is now able to print page 1.  The Send button has been implemented to make a 'mailto'.  I don't know if other destinations also cause the issue of the page not print not with older versions of the reader.

• Dynamically, use page number in the form on the pages with their field?

  I have a form with pages having engineered.  JS for spawning exception works very well.  However, a text field on model is driving me crazy.  I wish that this field ("CaseNum") to dynamically display the page number, given that the page number also matches the file number.  On templage ("getcase"), I can calculate the value for CaseNum using custom script calc (event.value = this. PageNum).  But it does not work because each page having spawned Gets the same value (that is to say, what is the latest issue of the page generated). I also tried the JS below, using P0.getcase.CaseNum as the field on the model in which I wish the page number/box number to display:

  var this.pageNum = opaque;

  this.getField ('P' + opaque + ".getcase" + ".") CaseNum') .value = opaque;

  But it does not either, because the page automatically generated field gets the prefix of the P + .getcase page number appended to the name of the field.  Is it possible to number of dynamic page used in a form on the pages with their field?  If so, how? Note that while I try to use a dynamic file on pages with their number, it presents the same problem as dynamically displaying pages with their page numbers.  I'm a JS newbie, so any help appreciated.  I searched high and low on the web and in the forums and couldn't find the answer.  THX.

  http://forums.Adobe.com/thread/1160899

  @

  7George Johnson,.

  

  February 28, 2013 09:42 in reply to natelfo

  Is that what you mean?

  See also:

  http://www.PlanetPDF.com/developer/article.asp?contentid=6466

  d-template-pages-using-JavaScript-functions/ http://www.wordwizardsinc.com/blog/Finding-the-FieldName-prefix-on-Acrobat-acroform-spawne

• problem of installing active sync 6.1 64-bit with active sync. you have a known issue with the compatibility. you have a work around where the way to get these two together?

  problem of installing active sync 6.1 64-bit with active sync.  you have a known issue with the compatibility. you have a work around where the way to get these two together?

  See: http://answers.microsoft.com/en-us/winphone/forum/wp6n-sync/microsoft-windows-mobile-device-center-61-driver/4cd26ba2-9583-47b7-b5e7-32b382cee0b2

• How do you reset security issues where there is a link at the bottom of the page?

  When I was younger, I did my security questions and do not remember them. I tried to reset, but it isn't a link at the bottom of the page click on reset. Any help is welcome!

  Hi Kayla_8

  This link appears only if you have a rescue address put in place on the e-mail account.

  If you don't have an e-mail address (different from the secondary e-mail address) help set up on the account, you will need to contact iTunes Support Online: http://apple.com/emea/support/itunes/contact.html (select security account as your help topic) or by phone: Numbers of Support from Apple

• Pages - trying to link the issue to the paragraph of the answer

  Hi there: neophyte user Pages for businesses trying to link the issue of the survey to a paragraph "answering machine".  As an example...

  Question:

  What's your brown grass?  Yes No

  If the answer is Yes, then want to fill and print a paragraph explaining...

  Your grass is Brown, because you're not watering or you need phosphorus or whatever.  Here's what you need to know about this resolution.  etc, etc.

  Any suggestions on the Pages or other popular apps.

  V5.6.2 pages is not suitable for the use of processing of affairs where one expects it to be a clone of Microsoft Word - who is not. There is no content link intra-document, support forms or runtime macros that manipulate the content of the document when the interactive user input. Pages is not a web design tool.

• Issue of the journal of diagnosis

  I'm an EQL PS6100 storage array usage in a disconnected site where items must be (absolutely no exceptions) reviewed before sending. Diagnosis of the table is encrypted and is not human-readable. I was able to work with support without diagnostic logs but am now running in a recurring issue.

  I would like to get these logs to Dell in order to identify a root cause. Is there a way to generate unencrypted newspapers or a certificate of sorts offered by Dell that indicates the data found in the newspapers themselves?

  Thanks for any input.

  Hello

  There is no document like this, I know.   Does not mean that it could not be written.

  Short version is the diag newspapers are the result of various exclusive commands that dump newspapers, the DB group, info on the H/W status, network status, .drive history, cache, etc.   As a block device table doesn't have access to the flies.  Blocks are translated in the pages of 15 MB.  Each page may have different parts of a volume on the subject.  Data on the pages is not used in the order.  So, even if the controller could access the data, it's like crack an egg to the EQL OS uses to start the controller.  The management software for network, iSCSI and all admin operations are handled by code EQL.   Only HTTP: / Telenet/SSH/ftp are managed by the OS default.

  Re: RCA.  Without complete diagnostic tests, I would say that it is impossible to determine the RCA.  Moreover, newspapers are circular, so longer you wait, the more likely some data will be restored by the newspapers.

  Re: on-site.  No, field technicians are lead in order to replace the failed H/W no triage.

  Kind regards

  Don

• CallType does not return a missed call event

  Hi all

  Today I try CallType function. At this time I show you this method returns only inbound and outbound event is not back Missedcall event.

  Please check below the code and let me know how I get missed calls event?

   CallType::Type callOfType = call.callType();
      if (callOfType == bb::system::phone::CallType::Incoming) {
          qDebug() <<  "Incoming call..........";
      } else if (callOfType == bb::system::phone::CallType::Missed) {
          qDebug() <<  "Missed Call..........";
      } else if (callOfType == bb::system::phone::CallType::Outgoing) {
          qDebug() <<  "OutGoing Call.........";
      }
  

  That is right. Which is currently used in call only logs. You should use Call: calLState() rather to identify missed calls. The following should work.

  call.callState() == CallState::Disconnected && _lastCallState == CallState::Incoming
  

  See you soon.

  Shadid

• Oracle APEX 5 - modal Close event without sending the page

  Hi experts,

  Is there a possibility how to close the modal page using 5 APEX without submitting the page called from? (just refresh the region).

  I tried to use event close modal in the parent but to start it I have to close the modal page to redirect to the parent.

  It automatically submit the parent page.

  Concerning

  J

  Hi Patrick,

  I found the right solution for me. I left the treatment of the normal page on modal button (Submit form and option SQL INSERT). At the end of the processing of the page, I created another page dealing with DIALOGUE NARROW - one of the option in the LIST on the page that deals (no action). I created record and close modal just by using the processing of the page. In the parent page I got it before (update).

  Thank you for participation.

  J

• Call a method bean after loading the page in the file jsff

  Hi all

  I'm working on JDeveloper 11.1.1.7.0.

  I need to call a managed bean method after jsff is responsible. My requirement is that I must add dynamically RichImage on my page. So I put a PanelGroupLayout as a container on the page. I add the RichImages to this PanelGroupLayout with

  parentUIComponent.getChildren () .add (childUIComponent);

  I tried using regionController but it gives me as regionController Null pointer has no access to user interface components on the page.

  then I tried with javascript, but it is not shooting my bean method managed. I put the code below in my home.jspx

  < af:document id = "d1" >

  < af:serverListener type = "onloadEvent" method="#{viewScope.ConnPocBean.initMethod}"/ >

  < af:resource type = "javascript" >

  function onLoadClient (event) {}

  AdfCustomEvent.queue (event.getSource (), "onloadEvent", {}, false);

  Returns true;

  }

  < / af:resource >

  and below is the code in my testPage.jsff file

  < af:clientListener method = "onLoadClient" type = "load" / >

  But here, when loading my testPage.jsff... initMethod() is not going to get fired.

  Please let me know what is the problem here.

  Thank you

  Fox

  If you want to try other ways to add a child element to PanelGroupLayout, use:

  parentUIComponent.getChildren () .add (childUIComponent);

  AdfFacesContext.getCurrentInstance () .addPartialTarget (parentUIComponent);

  in the Get accessor of the binding of an element method, which is placed after PanelGroupLayout in your jsff. So when the next component is loaded the child will be added to the PanelGroupLayout

• [ADF, JDev12.1.3] Call ExecuteWithParams operations programmatically when the page is loaded. How...?

  Hallo,

  in a working group, I have a 'readonly' page that uses in many istances VO (for fields, tables,...).

  When the page is loaded, I need to call its ExecuteWithParams operation for each VO.

  I would drag / drop (cascading) the operation of each VO ExecuteWithParams in the workflow, but the problem is that I need to run logic to call.

  For example, I have some cases in which I have to exec VO, and then pass the value of a field in the returned to the VO ExecuteWithParams, another record.

  I guess I can't manage this 'declarative' in the taskflow but I use code in a managed bean.

  So far, I've added for each VO ExecuteWithParams action page links.

  I know I can use a code like this to call the ExecuteWithParams for each VO...

  OperationBinding operationBinding = BindingsUtils.getBindings().getOperationBinding("ExecuteWithParamsToCall");
  operationBinding.getParamsMap().putAll(paramsMap);
  Object result = operationBinding.execute();
  if (!operationBinding.getErrors().isEmpty()) {
    return false;
    }
  

  ... but the problem is... where and when I call?

  I wrote in the managed bean extended view a public function initPage() tha called the ExecuteWithParams.

  How to use this function?

  I can use it during the lazy fo page load?

  Can I use it as a method call to place in the working group before the page? I have to admit that I already tried that way, but it did not work...

  In addition, after calling a VO ExecuteWithParams, as I said before, I may have the need to treat the VO after his execution to gather values for some fields (I'll pass these values to the other VO ExecuteWithParams).

  Can I access the iterator from the bean by using the iterator binding?

  Thank you very much

  Federico

  Instead, I have to create it in the the methodCall1 pageDef?

  Yes

  And if methodCall1 calls - as in my case - the function of a bean that uses the ExecuteWithParams many istances VO... I create all the necessary links in the methodCall1 pageDef?

  Yes

  And Yes... Links ExecuteWithParams that I created in the page untitled1 aren't necessary?

  Once again Yes (except if you do not have to invoke to untitled1 page)

  If you have 2 minutes trying to download the app, so you'll have is that I was

  I have more than 2 minutes (I hope), but I did not immediately jdev

  Dario

• PS ask activetion again. the worm is first CS PS v8, it fails, I tried to call help number given on the page but service does not exist, redirect to .../go/activation statement fails, it causes some assistance - activate is not possible to click

  PS ask activetion again. the worm is first CS PS v8, it fails, I tried to call help number given on the page but service does not exist, it redirects to .../go/activation

  statement fails it causes some assistance - activate is not possible to click

  Adobe has disabled the server activation for pre CS3 products a long time ago and that's why you are unable to activate your product. I can not to suggest what to do, but I don't know that CS2 owners with this problem can download a version specially created that doesn't require activation. To my knowledge, no such version exists for CS. If it was me, then as the real owner of the software and just unable to use it due to having no mechanism to activate, I download CS2 and use it until someone from Adobe told me to stop. It is a sensitive issue because the download site clearly indicates that there must be an existing CS2 owner. However, the url to the download was posted the pirate not many Adobe Web sites not as a way to free download the CS2. I imagine that there have been hundreds if not thousands of downloads from 2013 when it became first available and so far Adobe has not made any attempt to restrict the download to current owners of CS2. Their policy is quite clear if CS2 is not given away for free. Fortunately, I use CC2015, I can't make a call on it, but the URL is below if you want to move forward.

  Download Adobe Acrobat 7 and Adobe Creative Suite 2

  Terri