CallType does not return a missed call event

Similar Questions

• Run query does not return a lines

  Hello

  I find that the Executequery code does not return everything.

  {

  pageContext.writeDiagnostics (this, "connection entry-front connection", 1);

  Connection Conn = pageContext.getApplicationModule (webBean) .getOADBTransaction () .getJdbcConnection ();

  pageContext.writeDiagnostics (this, "connection entered" & conn, 1);

  pageContext.writeDiagnostics (this, "input connection [AJ]" & conn, 4);

  Dim Query = "select CODE a.secondary_uom_code, (select b.unit_of_measure from MTL_UNITS_OF_MEASURE b where b.uom_code = a.secondary_uom_code) GLU, xxtmxc_primary_selling_suom (: 3, a.inventory_item_id) ' PSUOM from mtl_system_items_b where a.inventory_item_id =: 1 and a.organization_id =: 2 and a.secondary_uom_code is not null ';"

  'UNION select 'OUR' CODE, UOM 'Number', 10 double PSUOM;

  String query = "" select secondary_uom_code CODE of mtl_system_items_b where inventory_item_id =: 1 and organization_id =: 2 and secondary_uom_code is not null '; "

  pageContext.writeDiagnostics (this, ' [AJ] after the query string", 4");

  pageContext.writeDiagnostics (this, "message query" + Query, 1);

  PreparedStatement stmt = conn.prepareStatement (Query);

  pageContext.writeDiagnostics (this, "prepared statement Post" + stmt, 1);

  stmt.setString(1,Item);  ver1

  stmt.setString(2,Org);  ver1

  stmt.setInt (3, Dis.intValue ());

  stmt.setString(3,Dis);

  stmt.setInt (3, Ext.intValue ());

  stmt.setString (3, Ext); ver1

  pageContext.writeDiagnostics (this, "Post Ext after SetString" + Ext, 1);

  ResultSet resultset = stmt.executeQuery ();

  pageContext.writeDiagnostics (this, "Resultset" + resultset, 1);

  If (resultset.next ())

  for (ResultSet resultset = stmt.executeQuery ();)

  ResultSet.Next ();)

  While (resultset.next ())

  {

  String code = resultset.getString ('CODE');

  String uom = resultset.getString ("UOM");

  String psuom = resultset.getString ("PSUOM");

  row.setAttribute ("UomCode", code);

  row.setAttribute ("UnitOfMeasure", GLU);

  row.setAttribute ("LineAdjustedPercent", psuom);

  pageContext.writeDiagnostics (this, "secondary UOM" + resultset.getString ('CODE') + resultset.getString ("UOM") + resultset.getString ("PSUOM"), 1);

  pageContext.writeDiagnostics (this, "secondary UOM" + row.getAttribute ("UomCode") + row.getAttribute ("UnitOfMeasure"), 1);

  pageContext.writeDiagnostics (this, "LineAdjustedPercent" + row.getAttribute ("LineAdjustedPercent") + "PSUOM" + resultset.getString ("PSUOM"), 1);

  }

  ResultSet.Close ();

  stmt. Close();

  }

  catch (SQLException sqle)

  {

  throw new OAException ("error in query Preparation" + sqle, OAException.INFORMATION);

  }

  pageContext.writeDiagnostics (this, ' [AJ] after try-catch: ", 4");

  }

  }

  }

  }

  Hi Bobo,

  I tried the same requirement in my local instance and changed the code for you.

  Please check process requires working Code of the form below:

  ' Public Sub processFormRequest (pageContext OAPageContext, OAWebBean webBean)
  {
  OAViewObject QuoteLinesLevel70VO1Obj1 = (OAViewObject) pageContext.getApplicationModule (webBean) .findViewObject ("QuoteLinesLevel70VO1Obj");
  if(QuoteLinesLevel70VO1Obj1!=null)
  {
  If (QuoteLinesLevel70VO1Obj1.GetCurrentRow ()! = null)
  pageContext.writeDiagnostics (this, "Current Row" + QuoteLinesLevel70VO1Obj1.getCurrentRow () .getAttribute ("UomCode"), 1);
  }
             
  pageContext.writeDiagnostics (, "concluded Save Button", OAFwkConstants.STATEMENT);
  If ("Event.Go".equals (pageContext.getParameter (OAWebBeanConstants.EVENT_PARAM)))
  {
  OAViewObject QuoteLinesLevel70VO1Obj = (OAViewObject) pageContext.getApplicationModule (webBean) .findViewObject ("QuoteLinesLevel70VO1Obj");
  if(QuoteLinesLevel70VO1Obj!=null)
  {
  pageContext.writeDiagnostics (thie, 'enter in Count' + QuoteLinesLevel70VO1Obj.getFetchedRowCount (), 1);
  int count = QuoteLinesLevel70VO1Obj.getFetchedRowCount ();
  RowSetIterator Iter = QuoteLinesLevel70VO1Obj.createRowSetIterator ("Iter");
  {if(Count>0)}
  Iter.setRangeStart (0);
  Iter.setRangeSize (count);
  for (int i = 0; i)<>
  {
  OAViewRowImpl row = (OAViewRowImpl) Iter.getRowAtRangeIndex (i);
  If (row.getAttribute ("InventoryItemId")! = null & row.getAttribute ("OrganizationId")! = null)
  {
  String Item = row.getAttribute("InventoryItemId").toString ();
  String Org = row.getAttribute("OrganizationId").toString ();
  Number say = (Number) row.getAttribute ("LineAdjustedPercent"); LineAdjustedPercent
  Dim Ext = (String) row.getAttribute ("Attribute1");
                            
                             int item1 is Integer.valueOf (Item) .intValue ();.   Converted entire string
  int Org1 is Integer.valueOf (Org) .intValue ();.     Converted entire string
  Try
  {
  pageContext.writeDiagnostics (this, "connection entry-front connection", 1);
  Connection Conn = pageContext.getApplicationModule (webBean) .getOADBTransaction () .getJdbcConnection ();
  pageContext.writeDiagnostics (this, "connection entered" & conn, 1);
  pageContext.writeDiagnostics (this, "input connection [AJ]" & conn, 4);
  String query = "select xxtmxc_primary_selling_suom(:1,a.inventory_item_id) PSUOM from mtl_system_items_b where a.inventory_item_id =: 2 and a.organization_id =: 3"; Index link //Changed
  pageContext.writeDiagnostics (this, ' [AJ] after the query string", 4");
  pageContext.writeDiagnostics (this, "message query" + Query, 1);
  PreparedStatement stmt = conn.prepareStatement (Query);
  pageContext.writeDiagnostics (this, "prepared statement Post" + stmt, 1);
                                  Item1 is Integer.valueOf (Item) .intValue ();. Converted entire string
  ORG1 = Integer.valueOf (Org) .intValue ();  Converted entire string
  pageContext.writeDiagnostics (this, "Param1 all" + item1, 1);
  pageContext.writeDiagnostics (this, "Param2 all" + Org1, 1);
  pageContext.writeDiagnostics (this, "Param3 all" + Ext, 1);
  stmt.setString(1,Ext);
  stmt.setInt(2,item1);  ver1
  stmt.setInt(3,Org1);  ver1
  pageContext.writeDiagnostics (this, "Post Ext after SetString" + Ext, 1);
                                  
  for (ResultSet resultset = stmt.executeQuery (); resultset.next ();)  //Used for loop in Resultset
  {
                                     
  String psuom = resultset.getString ("PSUOM");
  pageContext.writeDiagnostics (this, "[AJ] z:" + psuom, 4 "); //Here we got the value of the function
  pageContext.writeDiagnostics (this, "m [AJ]:" + Ext, 4);
                                      
  }
                                  
  stmt. Close();
  }
  catch (SQLException sqle)
  {
  pageContext.writeDiagnostics (this, ' [AJ] with the Exception: "+ sqle.getMessage (), 4");
  throw new OAException ("error in query Preparation" + sqle, OAException.INFORMATION);
  }
  pageContext.writeDiagnostics (this, ' [AJ] after try-catch: ", 4");
  }
                            
  }
  }
                   
        
  }
           
  super.processFormRequest (pageContext, webBean);
  }
  }

  Thank you

  Dilip

• Deployment error iTunes (ios Device): the project 'Oracle_ADFmc_Container_Template' does not contain a system called "Oracle_ADFmc_Container_Template".

  I'm trying to deploy my application on an iOS device. Can I deploy on the end Simulator.

  When I deploy, I get the following error:

  [18: 03:34] run command-line path: / Users/username/jdeveloper/mywork/appName/deploy/iOS1/temporary_xcode_project /.

  [18: 03:34] run command line: /Applications/Xcode.app/Contents/Developer/usr/bin/xcodebuild-guichet Oracle_ADFmc_Container_Template archive - archivePath /Users/username/jdeveloper/mywork/appName/deploy/iOS1/Destination_Root/appName.xcarchive CODE_SIGN_IDENTITY = "company name".

  [18: 03:41] orders for next generation failed:

  [18: 03:41] command-line execution failed (return code: 65)

  [18: 03:41] undeployment.

  [18: 03:41] - incomplete deployment.

  [18: 03:41] could not build the iOS application pack.

  [18: 03:41] deployment failed due to one or more errors returned by ' / Applications/Xcode.app/Contents/Developer/usr/bin/xcodebuild'.  What follows is a summary of the returned error:

  Command-line execution failed (return code: 65)

  Orders for next generation failed:

  Check dependencies

  (1 failure)

  If I run the same thing since the terminal I get this error:

  xcodebuild: error: the project 'Oracle_ADFmc_Container_Template' does not contain a system called "Oracle_ADFmc_Container_Template".

  Anyone know what is happening here? I am running MAF 2.01 and XCode 5.1

  It turns out that the error is a bit misleading. The name of the certificate is incorrect.

• When I return from the page of google search for a link then button does not return return

  When I return from the page of google search for a link, then button does not return back. Instead, the same page refills. I need to go back click back button twice or even more. How to fix? I cheked it it another browser and there is no such behavior. It seems completele Firefox problem.

  the problem was resolved after remooving extenshion «user agent overrider»

• APPLE 5S PHONE DOES NOT RING ON INCOMING CALLS

  APPLE 5S PHONE DOES NOT RING ON INCOMING CALLS

  1. Have you checked to see if you have the volume mounted on the ring?
  2. Have you checked to ensure the silence on the side of the phone is not set to mute setting?
  3. Have you checked to see if you disturb not activated?

  

• iPhone 5 c does not always sound during calls to the.

  iPhone 5 c does not always sound during calls to the.

  Is do not disturb on?

  This is the icon of Crescent Moon at the top right of the screen

  If yes – you can control center - activate by sliding upward on the homescreen of the lower edge and tapping on the icon

  If this is not the case - check to see if these contacts are in your blocked list

• IPhone 6 IOS 9.3.1 does not ring when a call comes, neither text does not sound a notification.

  IPhone 6 IOS 9.3.1 does not ring when a call comes, neither text does not sound a notification.

  Have you checked the obvious things? E.g.Ring/Silent switch on the left side is not on? Control the volume of ringtone under settings/sounds?

  If they are not serious then have you tried power the phone off and on again? Other sounds work fine, or if all sounds are dumb? for example can play you music through the speaker?

• my iphone 5s does not have wi - fi calling

  my iphone 5s does not have wi - fi calling

  You don't tell who is your carrier. Check out this support document to see what carriers are capable of things calls and other Wi - Fi, you may need to do.  Phone with Wi-Fi calling - Apple Support

• kb2596615 causes ade to failure, error was 459: object or class does not support the set of events

  A couple of my users started getting our application error messages ade grown after you apply this update. Everything is well after its withdrawal. First mistake was 459: object or class does not support the set of events. Basically, no event has worked. Why is this update break my application? It should be removed from the queue of the update.

  Okay, I've worked on it with Microsoft, and the actual cause turns out to be:

  MS12-060 security update affects the functionality of Access database
  http://support.Microsoft.com/kb/2748410

  This article updated fingers MS12-060, specifically KB 2687441, as the culprit.

  It turned out that ActiveX controls on the form (specifically the Microsoft Common Controls 6.0 Toolbar), caused the failure.

  The solution was simple: on a patched machine, open each form with an ActiveX control in design mode, compile and save it. It worked for me. Ignore the details of the solution that I wrote in the previous post!

  You may need to resave MSCOMCTL. OCX, as suggested in the article, to get your databases to work.

  -Ken

• HP 640 c: HP640c cartridge does not return to its original position and the printer will be no print anything

  Printer cartridge does not return to its original position on the right side of the printer after the top cover is opened, with the resume light continues to Flash.

  After restarting the printer, the cartridge moves to the right, but not all the way and remained there when the printer is off.

  The printer will not print anything.

  How can I get the cartridge is positioned correctly?

  Solved the problem... it's a defective color print cartridge, which was the carrage Act strangely.

• Screen turns black and does not return. One stop forced

  When I leave my computer for a while, the screen turns black and does not return when I press 'enter', or any other key.  I do a forced shutdown (turn off with the power button).  Can I get, and the "incorrect closing" message when I turn on computer. I think that it is a problem of Hibernate.  Any ideas?.
  MMM

  Original title: hibernation problem?

  What happens if you press Ctrl + SHIFT + ESC when you want to get out of hibernation?

  You use a wireless keyboard and mouse with a transponder. What happens if you press the button on the transponder?

• PC Windows 7 does not return the document or the printed page

  I had a setting for this in XP control but can't find the page, that I got it.

  This occurs in AN application, or a browser.  I print from a workbook Excel specific, for example, when I have a number of them opens.  The system does not return the workbook that I printed.  It's maddening and causes all sorts of questions.  Searching the Web for this instant product nothing and I know I can't be the only person who saw this.

  It is a platform of Windows 7 in a commercial network environment.  I use the snap Menu Addintools classic because I can't stand the Ribbon and never loved.  In Windows 7, I run a couple of other supplements that restore the XP the taskbar properly use, so you can work efficiently.

  None of the supplements are causing this problem because I was running the same classic Menu Add-in in the XP box and he had the same problem until I found workaround that I don't remember now.

  Everyone knows about this problem?

  Jeff Lynch

  Hello Jeff,.

  Please contact the Microsoft community.

  As the Windows 7 computer is under the corporate network environment, the issue that you are facing is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.

  Please post your question in the TechNet Forum.

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro&filter=AllTypes&sort=lastpostdesc

  Hope the information above has been a useful answer, Mercia back to us if you respect them more.

• Network type changes 'Public' and does not return to work when the default gateway is detected

  Original title: Type of network not restored on ethernet cable reconnect.

  I have a Dell Precision R5500 running Windows 7 Professional Service Pack 1. It is connected to a network that is stored as a type of 'work '. When the ethernet cable is removed and replaced network type changes to 'Public' and does not return to work when the default gateway is detected. I also have a Toshiba Tecra M10 running Window 7 Professional Service Pack 1 that initially detects the network restored as 'Public', but 'Work' once again Exchange is a connection to the default gateway. Is there a setting somewhere in the strength of the network to double check its type periodically?

  Hello

  You have any other network assets wireless (specifically) running on the computer?

  Have another active network connection could also cause this.

  Allows us to follow the methods mentioned below and see if they help.

  Method 1: Run the network troubleshooter.

  When the network type gets changed to 'Public' after the cable is disconnected and reconnected. The troubleshooter should let you know if there are errors with the associated services.

  See the following article:

  Using the troubleshooter from network in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  
  Method 2: check if network discovery and file sharing options are enabled in the network and sharing Center.

  See the following steps:

  a. click on start toreduce this top, type network and sharing Center in the Start Search box, and then click network and sharing Center in the programs list.

  b. If network discovery is off, click the arrow to expand the section, click turn on network discoveryand then click apply.

  Reduce this includes this imIf that you are prompted for an administrator password or for confirmation, type your password or click continue.

  c. If file sharing is off, click the arrow to expand the section, click turn on file sharingand then click apply.

  Collapse this includes this ima

  If you are prompted for an administrator password or for confirmation, type your password, or click continue.

  
  Method 3: Uninstall the network drivers and then install the last set of drivers on the manufacturer's Web site and check the issue.

  See the following steps:

  (a) click Start, right click on computer.

  (b) click on properties, click on Device Manager

  (c) expand the network adapter, right click on the adapter option

  (d) click on uninstall

  (e) now go to your computer / site Web of the manufacturer of the device, download the updated drivers and install them.

  Reference:

  Updated a hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• ctxrule - match does not return a result

  v.11.1.07 - I created a ctxrule index as described below. However, although a query must match on the given document, it does not return. Any ideas?
  

  begin
  ctx_ddl.create_preference('ot_lexer', 'basic_lexer');
  ctx_ddl.set_attribute('ot_lexer', 'index_stems', 'ENGLOSH');
  end;
   
  begin
  ctx_ddl.create_section_group('ot_sec_group', 'auto_section_group');
  end;
   
  create table ot_profile_test
  (profile_id number,
  query clob);
   
  create index ot_profile_rule_ndx on ot_profile_test(query)
  indextype is ctxsys.ctxrule parameters
  ('stoplist ctxsys.empty_stoplist
  section group ot_sec_group
  lexer ot_lexer');
   
  insert into ot_profile_test values(1, '($apple and $pear) and (1 within food)');
  commit;
   
  exec ctxsys.ctx_adm.set_parameter('log_directory', '/yourdir');
  exec ctx_output.start_log('ot');
  exec ctx_output.add_event(ctx_output.event_index_print_rowid);
  exec ctx_output.add_event(ctx_output.event_index_print_token);
  exec ctx_ddl.sync_index('ot_profile_rule_ndx', '2040M', null, 1, null, ctx_ddl.lock_nowait_error);
  exec ctx_output.end_log;

  Then, run a query:
  

  declare
  a clob := 'apple orange pears banana
  <metadata>
   <indicators>
     <food>1</food>
   </indicators>
  </metadata>
  ';
  vn_profile_id number;
   
  begin
   
  select profile_id into vn_profile_id
  from ot_profile_test
  where matches(query, a) > 0;
   
  dbms_output.put_line(vn_profile_id);
   
  end;
   
  ERROR at line 1:
  ORA-01403: no data found
  ORA-06512: at line 8

  Profile_id = 1 should not be returned?
  
  
  In addition, the log file should not have 2 lines written in $I?
  WRITING APPLE: ((PEAR) TOKEN = (PEARS)) * ((1) IN FOOD), 0
  WRITING APPLES: ((PEAR) TOKEN = (PEARS)) * ((1) IN FOOD), 0

  As noted earlier, you must use a list of words, not a lexer to control, like the two conflicts between them. All what you need to do is remove the following line from your code:

  ctx_ddl.set_attribute ('ot_lexer', 'index_stems', 'ENGLISH');

  You can still have a lexer with other attributes; Just do not set the attribute index_stems to the lexer. Set the attribute generator of forms derived from the list of words only.

• sys_context procedure does not return an ip address

  Hello
  
  
  DB 11 GR 1 material
  
  What would be the reason for which this query does not return an IPAddress?
  
  Select sys_context ('userenv', 'IPAddress') of double;
  
  Thank you

  What would be the reason for which this query does not return an IPAddress?

  USERENV does not know what the IP # is.

  Connected to:
  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  
  SQL> select sys_context('userenv', 'ip_address') from dual;
  
  SYS_CONTEXT('USERENV','IP_ADDRESS')
  --------------------------------------------------------------------------------
  

  Maybe it's because you are connected locally & not via SQL * Net

  Published by: sb92075 on October 27, 2010 12:53