iSupport - register a person as a user for access to his party of the person

Similar Questions

• Can not connect - when entering a password message "the service user profile service has no logon. Failed to load profile \User' cannot access start menu to apply the options.

  Can not connect - when entering a password message "the service user profile service has no logon. Failed to load profile \User' cannot access start menu to apply the options.

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• Tags for accessibility - what to do with the Table of contents & more

  I'm looking for assistance and advice concerning the marking of a PDF document for accessibility using Acrobat 9 Pro.

  So far, the most I've ever done with Acrobat's create the occasional straight-text document and a few simple forms.  But my boss asked me to score a manual of programming for accessibility and I'm a little lost.  There are a lot of both the images and the code examples in this text that I have no idea how work with because auto-tagging is seems to be haywire.

  I downloaded the Acrobat 9 Pro accessibility repair Workflow document and have done the following:

  1. Determined that my document is not a scanned document.
  2. Determined that there are no forms or the buttons in this document.
  3. Set the language to English.
  4. Set security for document "no security".
  5. Determined that the document contains bookmarks.
     
  6. Determined that the document is not a document labeled.
  7. Run the accessibility full check.
     

  This is where I ran into problems - both because of the nature of the document and my own ignorance of the process 'make accessible '.

  My table of contents is divided into several areas indicated in the form of tables, but the individual elements of the array are improperly identified - I have no idea how to do to make them appear correctly.  Advice would be appreciated.  Suitable for the Table of contents even being a table?  I know it's called a table, but it has several levels and I'm not sure what to do with it.

  There are also several tables in the document.  They appear especially OK, but Acrobat seems to think tables are made up of individual and figures produced "No alternative text for Figure" errors on some of them.

  I mean, how the hell can I make text flow on code?  The code is all text, not images.

  If someone knows something about this whole thing accessibility I would greatly appreciate your comments.

  Thank you!

  Jenn

  Assuming that the original manual is the WORD, it is probably best to simply go back to WORD and PDF Maker allows you to create the PDF file. Which will add bookmarks and other tags which will provide accessibility. Probably all that is needed. It is much easier to create your own tags. Of course, I guess you use style sheets in the original and this marking would be. If you have not used the style sheets in the original, you probably have a lot of work in front of you.

• I have a single user for CS6 license but cannot find the key.

  I paid for a single user through my business license and gave me a website to get the software out of. It also gave me a key to authenticate the software once downloaded. How to get another key because I move to another pc and company and I don't have the key?

  Hmmm, it should appear from the ID is of course attached to the program.

  At this point, I would personally just install on the second machine as a test. You can get Adobe here (bottom of page) programs: download and Installation Help | Download and Installation Help

  Install as a trial on the second computer, and then open DW and select help > activate and use the ID that is attached to the program on your current computer when you are prompted.

  It "should" operate.

  If that doesn't fly for any reason, you will need to contact Adobe directly. Make sure you let them know you've already been on the forums or they will try put you back: Contact customer service

• Is there a way to query users for specific api access on app download?

  For example, we need access to net_rim_bbapi_phone in a part of our application.  Currently, the application prompts the user for access... unless the user has enough foresight to check "Set application permissions" before downloading and then comes to allow access to bbapi_phone by default.

  Would be nice if we could draw the attention of the specifcially from the user to the fact that we need access to net_rim_bbapi_phone to download.

  You can use the ApplicationPermissions and ApplicationPermissionsManager classes to allow your application to request the settings as needed.  For an example, take a look at the applicationspermissionsdemo provided with the BlackBerry JDE.

• Users can access Essbase 7.1.3

  Hi all
  
  We use 7.1.3, essbase and we want to define the access of the user like this:
  
  1. the user have access to only some of the all calculation scripts
  2. the user has read/write access to the data of the current year, period
  
  How can get us this done?
  
  Our problem is
  1. If we give 'calculation' access to a user and assign calc scripts to the user. the user sees only his scripts as expected, but he is able to read/write data in the database. Even we have filters assigned to the user. Is this a bug?
  
  2. If we give the 'designer' access to a user, the user is affected by the assigned filter. but he is able to perceive all the script maps calc...
  
  Thank you for your advice. Thank you in advance!

  That's how it worked since I started working on Essbase in version 3. The user will be allowed to lock parts of the database that enables its filter. But can can calculate anything in the database that is in a calculation, to which he has access. It's funny, loading rules comply with the access to the filter.

• Force the user to fill out an interface of the window before closing

  Hi all

  We already have an application written in Labwindows and we need to change to the new requirements. According to this condition, the user must provide more information before proceeding with the application. The idea is a popup window and force the user to include the information in this window. I have two questions here:

  -How can I prevent the user to close the second window before entering anything (something like the concept of modal window)? He should be able to access first window that after he clicks ok in the second window, out per second.

  -How to pass values between the two windows?

  Thank you

  Kanu

  Hi Kanu,

  These issues concern some fundamental concepts in CVI, you need to study or refresh.

  As you may know, the simpler you have a modal window in CVI is to use InstallPopup after loading the Panel: is the guarantee that the user cannot access other panels before closing the popup panel (Finally, there are other ways and a few caveats to my assertion, but let's first passing the simplest).

  When the user clicks OK, close or no matter what button place you on this Panel, you need to retrieve the value of the relevant controls with GetCtrlVal, validate them some way according to the nature of the control and your needs and only if it is valid, close the Panel with DiscardPanel (or RemovePopup if you need to reuse and don't want to reload).

  Passage of the second round table data is done via SetCtrlVal.

  As you can see, these are very general concepts, which may or may not apply to your application. In case you have doubts please add some details to your question.

• Office XP Service Pack 3 for Access 2002 Runtime error

  How to solve this error?

  Hi EmilyGal,

  1 are. what question you facing this update?

  2. what code or an error message do you receive?

  3. when exactly you will receive the error?

  If you have a problem to install the update, you can manually download the update from this link & try to install it:

  Office XP Service Pack 3 (SP3) for Access 2002 Runtime

  Hope the helps of information.

• If I sell my iPhone 6, indicating the error 53, for parts, should I worry about the person buying it have some sort of access to the personal data registered on this phone?

  If I sell my iPhone 6, indicating the error 53, for parts, should I worry about the person buying it have some sort of access to the personal data registered on this phone?

  Hello error 53 matched a UN failure to the home button you had to replace the screen or the home button alone or outside apple store so if you replace the button man of origin and you restored the iPhone error will be fixed but if you sell the buyer has no access to the data of the iPhone

• Group Policy to clear the MRU lists and to clear or to prevent the login information of the user for such programs as being registered remote desktop

  Hello

  Please someone can instruct me on how to implement Group Policy to clear the MRU lists and to clear or to prevent the login information of the user for such programs as being registered remote desktop. Your help would be much appreciated.

  Kind regards

  RocknRollTim

  Hi Tim,.

  Please contact Microsoft Community.

  I understand that you want to prevent the user details stored connection and deletes automatically the most recently used (MRU) list. To help you better ask you to answer the following questions:

  Your computer is connected to the domain?

  Please see the configuration group policies section below.

  http://TechNet.Microsoft.com/en-us/library/bb742376.aspx

  If the problem persists, thanks for posting the same question in the Microsoft TechNet forum for assistance.

  https://social.technet.Microsoft.com/forums/en-us/home

  Hope this information helps. Response with status so that we can help you.

• Users for Applications of the OBI

  Hello
  
  I am confused with point 4.4.1 of the Applications OBI 7.9.6.3 installation manual... I ve copied below:
  
  + "The transactional (OLTP) database user which is recorded in the DAC must be the +"
  + the owner of the database table. You can also at the very least, the user registered in DAC +.
  + must have read privileges on the transactional database for all tables and aliases. +
  + For databases CRM Siebel, the OLTP database user requires privileges create +.
  + triggers and views on all tables and aliases. » +
  
  I do not quite understand... The OLTP database user that is registered in DAC > > pls. It is the owner of the dac repository? One that do us the DAC connection?
  
  The next paragraph explains... the OLTP database user requires privileges to create a... > > I guess it's the same user that above?
  
  PLS, I appreciate the comments and help :))
  
  TXS
  Antonio

  Answers to your questions:

  I do not quite understand... The OLTP database user that is registered in DAC > pls. It is the owner of the dac repository?

  A: this is referring to the ERP system schema user. DAC direct JDBC calls to the OLTP system so that user must read the tables and also ADD/DROP index. You may also import OLTP tables to DAC to save time. This isn't the user you are using to connect to the DAC or the owner of the DAC repository. More precisely, it is the user of ERP system you describe in your source system.

  The next paragraph explains... the OLTP database user needs privileges create... > I guess it's the same user as above?

  A: Yes, this is the user OLTP. If your source system is Siebel CRM, you must have access to CREATE. If its NOT Siebel CRM then CREATE TABLE privilege is not necessary.

  So useful, mark appropriate or useful

• Re: changing the user for every user ID

  Hello
  
  We currently use the SSN as the user name in our system (11.5.10.2 eBusiness). We need no longer use the SSN and swap to another number that will be provided.
  
  We have about 850 k accounts to be necessary.
  
  The new identification number that they wish to use is 10 characters vs 9 SSN.
  
  Is it possible to pass all the records for the new ID of the former via a script from changing that much in hand is not possible.
  
  Kind regards.

  Salvation;

  Please see how one changes the person shape to ensure the SSN for some users? [377737.1 ID] and also the notes of referance, if its not help I suggest increasing SR

  Respect of
  HELIOS

• Hello how do I configure Firefox 8.0 so that he asks me if I want to save a password for a Web site. At the present time I don't get not an option whenever I go into a site I know is safe, I have to enter user name and password. I've been good tools etc.

  Hello how do I configure Firefox 8.0 so that he asks me if I want to save a password for a Web site. At the present time I don't get not an option whenever I go into a site I know is safe, I have to enter user name and password. I've been good tools etc.

  Thank you, any help would be help full like whenever I connect to Face Book for example I have to provide all the information and it's a pain

  Soon Alex

  See:

  • https://support.Mozilla.com/en-us/KB/make-Firefox-remember-usernames-and-passwords#w_make-Firefox-remember-usernames-and-passwords

• guide the downloadable pdf user for my new ipod touch 128 gig

  I go to the hospital and thought it would be nice to have a downloadable PDF? file or users manual for my new 128 GB IPOD Touch. Would be nice to print it and I could read inbetween the misery. I have an IPOD classic 120 GB that was easy to learn, but at 60 years its filled with AC/DC to Zappa. bought a dell as well as Laplink pc mover ultimate transfer cable for when I go home and I was wondering if you fine people might help me find the manual and give me your opion on what product use to transfer everything from my old pc to a new laptop and how they work, which is more important for me to copy Itunes on the laptop. Do I need to install itunes on my new pc before the transfer also. Laplink says I don't have to, but I need help before I head to the nursing home, and in this way can I sell my huge Cyberpower PC and my laptop old, old games to help pay for it. I don't want Government take my last things and I'll just have a laptop and my 2 iPod. they can fight on this small remnant. Thank you very much in advance for any help or ideas on a topic that I think the technology spend me, lol. I have a few years back did some updates on the game turn so could still play the games. Sorry I'm dragging this point, I just wanted to ask the communities for the first time in my life. TYVM, and we hope that everyone has a great day!

  I'm sorry, but Apple no longer produces a printable User Guide. It is available in a web manual, or on the iOS device in Safari, or alternatively, you can access it in iBooks.

• Forgotten password user for Satellite P100-313

  Hi@all,
  I forgot the password of the user for Satellite P100-313. Can I remove the password without professional help. Please help me.

  Good bye

  Hi Lukas.

  If it's the BIOS password you have forgotten, then you will need to take your laptop to a repairer authorized to have the BIOS reset.

  If it's just your username password in Windows you've forgotten, then you can start in safe mode and use the "Administrator" account to reset your password. Just press F8 during the boot sequence to get the option to boot into node without DANGER.

  concerning