Problem using Toshiba Software Installer for Win 7 on Satellite L750-1MT

Similar Questions

• Error "Windows has encountered a problem installing the software driver for your device." Windows found driver software for your device but encountered an error trying to install it.

  So I got a wireless mouse for my first time and it won't even install on my computer. It isn't the mouse because I tried other wireless mice and none of them work. In my device under other devices Manager there are only 2 USB receivers listed with question marks next to them. It is said that they can not find the drivers for the device. Then under my HIDDEN I tried to update the HID-compliant device and the USB input device, nor able to update. This is the message I get.  Windows encountered a problem installing the software driver for your device. Windows found driver software for your device but encountered an error trying to install it. Peripheral HID-compliant, the system cannot find the specified file. I already contacted EVGA about the issue, because there is where I got my motherboard, but they said to contact Microsoft and I didn't really want to pay 50 dollars to send them an email. That's all just ridiculous.

  Well, I found the solution, just in case anyone has the same problem.  Apparently some day caused Wireless does not work on several computers. So you go into Manager for all of these research and device drivers manually. Then, you look for in C/windows/winsxs. Then the wireless mouse/keyboard should work.

• 5610 ofice software suite for win 8

  Downloaded the patch for full functions of 5610. The Office suite for win 8 goes so far and then the system cannot find specified file. So, how do you get the complete function of this printer?

  Hello
  Follow the steps below and check if it solves the problem:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.

  Now, try to reinstall the HP software and check if the installation goes as planned.

  If the problem persists, continue following the steps below:

  2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
  3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
  4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
  5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
  6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
  7. run the installation file and check all difference.

  Kind regards
  Shlomi

• C4180 installation for win 7

  C4180 was on professional XP - install the drive goes up to xp.  What should I do to install on windows 7 Professional.

  Hello

  The disc that you have only contains drivers for Windows XP, download the software from the link and install it. The software contains drivers for Win 7 and will be installed during installation.

• Satellite A300 Toshiba Disc Creator (for Win 7?)

  Hello

  I have the Toshiba Satellite A300 model, the original comes from OS with it is Vista 32 bit. I've recently updated the laptop for Windows 7 Ultimate.

  I downloaded all the applicable programs associated with Windows 7 32 - bit, up to now, all worked perfectly smooth... However, I searched for the Toshiba Disc creator and found none in the Toshiba download page.

  This is the link that I use:

  HTTP://EU.COMPUTERS.TOSHIBA-EUROPE.COM/INNOVATION/DOWNLOAD_DRIVERS_BIOS.JSP?SERVICE=EU&BANNER_ID=HOM E_RSL_DRIVERS

  If someone could help me in this and redirect me to the download page for Toshiba Disc creator (for Windows 7 32-bit). would be appreciated

  Concerning

  The Toshiba Recovery disk Creator is only available as part of the original image of Toshiba.
  You can download this tool.

  See also this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=56007

  It's the same theme...

• Satellite A350 - Toshiba service station for Win 7 does not work

  I'm on a Toshiba A 350 and downloaded Toshiba Servc\ice utility Station for win 7.
  It does not open (even if the admin rights).
  The TsmachInfo service is started in srvices.

  Workarounds or I have to install something more to this work?

  Hello

  As far as I know you have to unpack everything first, and then you will need to run the exe file
  Check this box

  Otherwise it s an OS issue because the exe file should work fine and you should be able to install this tool.

  Welcome them

• The upgrade of OS for Win 7 on Satellite Pro A210-1AZ

  We have two machines that also work well on Vista 32 and we have increased the RAM on both.
  They are very slow and all two defective CD/DVD players.
  I want to solve the problem of the speed and would like to know if the upgrade to Windows 7 64 would make the machine run better.
  All of the software and devices that we use are compatible.

  I read the advice on the Web from Toshiba site on how to upgrade, but it lacks a lot of information.
  For example how to deal with the HD partitions. There is the boot partition and the stupid E drive parition.
  This is one aspect of these PC that has always annoyed me. Why split the drive C and E, it must be just C.
  For example all Toshiba on the PC, things software applications for CD/DVD etc.?

  If someone has done one of these jobs,

  Replaced the CD/DVD drive - I can just adapt any drive or is there a special unit of Toshiba?

  Replaced the hard - what type, size and the connection? Can I just buy any player? How do you get home? I was planning to take the old drive and put a new and install Win 7 on who - saves all them messing around with the update.

  Has anyone tried Linux?

  > For example how to deal with the HD partitions? There is the boot partition and the partition of drive E stupid.
  I think that it of better to have two or more partitions only on the partition.
  First of all, you can install the operating system (Win 7) on the C partition and other files like photos, movies, etc. can be stored on the second partition. Usually the operating system will ask you where you want to install the operating system. You can point to the C partition, only this partition should be formatted.
  This means that not disappear your files on the second partition of HARD drive.
  It is one of the benefits if you have more than one partition.

  > How to make all software Toshiba on the PC, applications for CD/DVD etc. things for example?
  Toshiba software can be downloaded from the European pilot page Toshiba.
  If you need drivers, then you should take a look here
  If some drivers Win 7 would be missing, then you should look for in other models of laptops from Toshiba for a driver and tools. In many cases, the drivers of the other models would be compatible. In the worst case, you will need to search for and collect the drivers of your own hands using google.

  > Replaced the CD/DVD drive - I can just adapt any drive or is there a special unit of Toshiba?
  No, you must use a compatible; This CD/DVD drive can be ordered from Toshiba ASP.

  > Replaced the hard - what type, size and the connection? Can I just buy any player? How do you get home?
  You must use a SATA 2.5 HARD disk! SATA has no size limit, you should be able to use also 500 GB 2.5 SATA HDD.

• Question about the installation of Win XP on Satellite Pro P200

  Hello

  I have a lot of problems with Vista. First it took me a week to install my printer WiFi. (sollution: install local lpt1 as the printer, change port properties en gives a location network (computer/printername).)
  Last problem: vista give no right to copy my USB hd protable with xp files.

  Finally, I lost all hope and want to go back to xp.

  Is there anyone with experience in the installation of win xp on this laptop. And is it possible to tell me the steps that you have been taken to do so.
  Are there concerns as none have some drivers, things that do not work or problems with sata hd.

  Thank you

  Luke

  Hello

  It's a difficult topic-> XP on Vista machines.

  First: Yes, you can install XP on it because all the important factors are available (VGA, SATA, wireless, XP BIOS, BLUETOOTH) and that should be enough.

  Because your computer has a BIOS for Vista (I guess there a) Please install the BIOS XP first and then start the installation of XP. In the case that your HARD drive is not recognized then you need to install the SATA driver during the installation of windows XP. The procedure is described in the statement of the Satellite L40-> XP installation, so if you want to install and problems SATA (HDD, not during the XP installation), you must check the installation instructions for Windows XP for a SATELLITE L40!

  If you have additional questions, I recommend allows you to place your question here before doing something that may stop your nerves later. :)

  Welcome them

• What SATA controller driver is necessary for Win XP on Satellite L300 BRAND

  Hello

  I need to get rid of vista on my new laptop preinstalled and was going to put Win XP. Of course, Win XP doesn't have SATA support. I've read on how to do (i.e. nlite drivers during the installation of Win XP disk in some way), but I could not find the drivers for it on the web page of Toshiba. Could someone please help and point me to the correct driver for this machine?

  Thank you very much in advance,

  What you need is the Intel Storage Manager.
  The European Toshiba page provides this crib of storage, but you can also download it from the page of Intel. Simply search for Intel Matrix Storage Manager.

  The package contains files different and different SATA drivers for different chipsets.

  Check it out I m that the Storage Manager is the key ;)

  Good bye

• problem opening of software downloaded for printer want 110, cannot use CD, not known to message format

  Ive downloaded the software from the HP home page, but trying to open the .dmg I get message, unknown format. I am trying to install on my Macbook

  thx for suggestions on how to proceed

  UM. Maybe a download corrupted? Try ID removing the first download and download the update again. I've linked the download below if it is easier to find. Report with your results, thank you!

  HP ENVY full feature software and drivers - Mac OS X v10.5, v10.6, v10.7

• Satellite A110 Upgrade - Xpress 200 M problem, lost Toshiba Software

  I own Toshiba Satellite A110-110. After using this laptop for a period of two years with pre-installed system, CPU and RAM, I decided to update. So, I change Celeron M410 for a Core Duo T2450, 60 GB HDD for a HARD drive of 250 GB and 512 MB of RAM to 2 GB of RAM and Windows XP it for a Vista Enterprise.

  Installation of all parts and software went well. Then, I downloaded and installed the drivers for Vista. So what's the problem you could ask?

  An ATI Xpress 200 M, could get up to 256 MB of graphics RAM on Windows XP, now with Vista, this graphics card in the Panel displays only 128 MB (shared) memory got. Is there any option to change the settings and have the old 256 MB. Maybe someone knows the solution?

  As the second main problem after that the upgrade of my personal system is total lost all Toshiba Utilities like connectivity, Wireless LAN search doctor (transparent oval radar hide on the right side of the screen with other options), Panel of SRS WOW Sound and others who were in Office Setup.

  Vista does not appear all that I put in the system, some of them. If someone can help fix this problem and know where I can get this kind of software would you please give me a tip and write what kind of idea, you are able to share.
  Thanks for any help!
  Alex

  As already suggested Homer shared memory cannot be manually set to a higher value. Everything works automatically and the graphics driver control and assigns the amount of shared memory
  In addition, the shared memory value max depends on available main memory.
  The high value of the main memory, the upper value of the shared memory could be used on laptop computer A110.

• Windows encountered a problem installing the software driver for your device.

  My USB ports do not work. I need to get my documents and personal information off this computor before it crashes! I am running Microsoft Windows Vista - Home Premium Edition 32. HP Pavilion intel pentium.

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  ======================================

  If nothing works on a PC onboard USB can be disabled and a plug-in software component USB card used
  that is not expensive. On a laptop, it would have a real computer (not the leeks and pics store
  at a BestBuy or other BigBox stores) or system manufacturer support.

  Also check with HP support and forums.

  HP support
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.
  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• is there a way to do software designed for win 95 compatible with windows vista

  I'm trying to load a video game titled front-page sports football pro 96. It was initially compatible with win 95. Is there a way to make it work on windows vista. Thank you.

  Hi Jimarcher,

  You can try to run the game in Windows 95 compatibility mode to Windows Vista and see if it helps.

  For more information, see the article:

  Make older programs in this version of Windows

  Hope this information is useful.

• MUSTEK 1248UB Scanner - correct Installer for Win 7

  For installation of Windows 7, only download the http://www.mustek.com.tw/Support/ driver as other sites have an older, incompatible driver.  You should find that the driver is about 25 MB and is dated in 2008 and is v1.2.  You also need to install in compatibility mode against Vista, like their other older installers, they recognize the operating system and install everything except the key driver files blindly.

  Hello

  We appreciate that you have provided valuable information. Your answer will help others. For any problem with Windows, you can still post to the same forum.

• [E430] UltraNav software available for Win 8 64 bit?

  Hello

  my Lenovo E430 came with a preinstalled Windows 8 Standard and he had a special software to control the TouchPad. To uninstall Win 8 (then), I had tried a few other OS, and now I have installed 64-bit Windows 8 Enterprise (I have the license of my campus), but I can't find UltraNav settings anywhere. Without it, I can't customize the TrackPad.

  Is there a solution for this?

  Thank you.

  Hello!

  Sorry, I thought that I have UltraNav installed via the update system... But I didn't. I have now installed it and it works perfectly.