It is a view of laboratory interrupt structure vi?

Similar Questions

• my project is to measure the voltage and current by using the view of laboratory.

  Dear Sirs,

  I have a project to measure parameters electric ac current, voltage, power factor etc through aquisitioin of data with labview. Can I do this? If yes then kindly help me with some opinions and ideas. I'll be very grateful to you.

  Muhammad Azam Hanan.

  Student of the University of engineering and Technolgy, Lahore, Pakistan.

  
  

• Video freeze while running Lab View 10

  I use Lab View 10. My video will freeze every so often. Labview somtimes stops itself? I can run other applications when lab view is frozen. Is this a view of laboratory programming problem or possible a video card problem. The main VI is 1.7 MB. I am running Windows Xp 32 bit. 2.4 Gig, 4 GB memory, CPU video Nvidea GeForce 8400 GS. It seems to be a video refresh problem. Can I have a screen with two different application on top of the other screens. Can someone confirm that the video card is the issure?

  Any suggestions would be helpful.

  Ahh, the title of your post made it seem like a real "video" problem, you're just talking slow performance of the right edition?

  This is a problem since LV2009: http://forums.ni.com/t5/LabVIEW/LabVIEW-2009-slow-performance/td-p/975185/page/2 especially when editing large screws

  Unfortunately, I have saw that there was still a really solid solution to the issue.  Your first step should be a massive compilation of all your screws to ensure they are correctly updated.

• Structured FrameMaker crashes on Windows 10 x 64

  I have a clean windows 10 x 64 (Chinese edition) installed and I downloaded the trial version Framemaker 2015 on the Adobe site.

  When I start the application, a window opens, asking me to select Framemaker, structured Framemaker or Framemaker XML Author.

  If I chose Framemaker, everything looks ok, except that I can't import graphs. It is said that the filter will not and the translation may not be completed.

  If I choose the other two, the main window will show, but before the start page (I mean the page where you can see "Recent items", "Restore the Sessions", etc.) Watch, an internal error window appears with the code 13014, 15811732, 15812026, 18936253, saying that he must quit Framemaker.

  I tried to run it in Administrator previledge-compatible mode, but have no luck.

  Hi Toxomo,

  FrameMaker needs .NET 4 for mode of XML. It seems that some of the .NET 4 components are properly installed on your machine.

  You can fix this problem either by

  (1) application windows updates

  (2) .NET repair facility.

  To confirm that this problem is the same, please follow the steps below: -.

  (1) go to C:\Program Files (x 86) \Adobe\AdobeFrameMaker2015

  (2) open maker.ini

  (3) the following entry view XML comment = plugin, structured, xml view, FMXmlView.dll, PL_SwitchToXmlView

  (4) save maker.ini

  (5) start FrameMaker

  Thank you

  Pankaj

  FrameMaker Engg

• Adobe for Web content viewer can display of only 1 article in a folio?

  Suppose for example I ran Inspire magazine and had a folio called June 2015, can I create a link to an article within this folio using the web content viewer? Take the structure for example below.

  Inspire (App)

  -April 2015 (Folio)

  -May 2015 (Folio)

  -June 2015 (Folio)

  -Editorial (Article)

  -Cover story (postto display on the Web page)

  -Interview featured (Article)

  
  

  Can I have just a link to this article using the Adobe Web content viewer, or is the folio June 2015 the only thing I'm allowed to link on a web page? Thanks in advance for the help!
  

  Hi Chris,

  Take a look at this article: Content Viewer web Embedding in your web page. Adobe Developer Connection

  It describes the URL scheme to access a specific article:

  s////

  .html

  Does that answer your question?

  Thank you!

  Brian

• Faced with Windows 2008 R2 PKI, self-signed certificates & view iPad customer Secure Authentication to view connection server: UGH!

  Background: I was instructed to create a VMware View isolated laboratory test so that HIGHER-UPS can see how they could access the VM dedicated as well as how their developers could put related clones on-the-fly. The project was successful! Yay!

  Addendum: A boss wants to see how VMware View works when accessing his computer virtual dedicated via his iPad on the internet... And who needs a secure SSL connection.

  The problem is: the domain name I chose casually because the lab did not belong to me... So I can't have a real certificate from a trusted commercial certification authority.

  So I'll try to roll my own public Windows 2008 R2 PKI and... All that forcing the iPad to use DC/DNS server in the lab... Get only the single get iPad trust view connection server by importing a sort of certificate.

  Can I export/import a certificate of the CA of DC to the iPad via an attachment... And it happens with confidence. But how to create a login to view the server certificate and electronic-mail/import in the iPad so it happens with confidence? Whenever I try to export the certificate of the certificate of the view connection server store, send it to the iPad and install... The connection server certificate appears as 'not reliable' and the VMware View client will not connect.

  (Of course, I could get sloppy and set the iPad Client to accept untrusted connections... "But I want to solve the problem of approved connection).

  I could be missing something royally on the self-signed certificates and certificate chains.

  (It is a first for me dealing with Active Directory Windows Certificate Services. In the past, I always just installed expensive commercial SSL CA certificates in the certificates Windows Server stores before.)

  Any help or direction, you can provide would be appreciated. I'm rather confused.

  See you soon!

  Keegan

  Hello

  Maybe was your initial problem that the provided certificate must be a descendant of a trusted root, such as Verisign cert or

  the root certificate must be installed and all the intermediate certificates in the trust chain down to the one you use?

  Concerning

  AndyR

• How to display tree view in data in the grid?

  Friends hi.,.

  I use the tree control to get the data from database dynamically.

  Now I use selected (node or folder) will be grid view in the tree structure with the help of Panel.   an example of coding...?

  Someone help me...

  Regarding.,.

  Lingu..,.

  I've posted some examples of arborescent structures in a Datagrid in a subject a little below it

  http://forums.Adobe.com/thread/569070?TSTART=0

• Acquisition of USB mouse.

  My goal is to create a view of laboratory program that tests the functionality (buttons, scroll wheel, follow-up table) a USB mouse that is connected to the USB port and if I'm trying to process the raw data that sends the mouse.

  I currently have a USB wireless mouse and I am trying to get information from button and axis in Labview.  For one reason or another, when I try to create a VISA the Wizard "Driver" driver and update the driver for my USB dongle uses this driver rather than the driver HID standard, the device comes back with an error message saying "device cannot start" in Device Manager.  Is there something special I have to do when you create the driver?  I use the good VID and PID that the wizard asks me to.  I did it in the past for other devices USB (game controllers), but this USB wireless mouse gives me a headache.

  Are there other methods of obtaining the raw data of USB mouse in labview outside assistance from the driver VISA method I've used in the past?  I also tried to use the 'Input Device Control' of the function pallate screw but the problem is, I can't have 2 USB mouse plugged in (mouse to control the program and mouse under test) because while the 'test' is running, or the mouse can be used to affect the test.

  Thanks in advance for your help.

  Thank you all for your comments.  I finally got to work using the pilot VISA after a few hours to play with the other methods (using Hid.dll, knots of the library, etc.).

  You are just Intaris that it is a composed device.  The trick is to indicate that it is a device composed when creating a driver with the correct number of interfaces.  Then, when you update the driver, you have to choose the good "USB Human Interface Device" in device (under list of Interface devices) Manager to update.  For example, the USB dongle uses 0001 Interface USB to communicate with my mouse, so I had to update the 'USB Human Interface Device"which corresponds to the correct interface.

  All I can say is that it works finally.

  Thank you for all your help.

  I encountered another problem, but I'll try to play with him before I come on the forums for more help :-)

• Cannot bind to the shared object created with LabVIEW 2009

  I have problems referring to a shared library built from a LabVIEW VI under RHEL 5 with LabVIEW 2009.

  To illustrate the problem, I created a VI with a digital input and output that corresponds to a certain number. Then, I created a draft specification of build to create a shared library with a feature that makes use of this VI square. The shared object is created successfully (square.so).

  When I try to compile a test application written in C, that connects to this library, I get errors in the following link:

  cc  -I/usr/local/natinst/nidaqmxbase/include -I/usr/local/natinst/LabVIEW-2009/cintools build/square.so  test.c   -o test/usr/local/lib/liblvrtdark.so.9.0: undefined reference to `std::basic_istream >& std::basic_istream >::_M_extract(float&)@GLIBCXX_3.4.9'/usr/local/lib/liblvrtdark.so.9.0: undefined reference to `std::basic_istream >& std::basic_istream >::_M_extract(double&)@GLIBCXX_3.4.9'/usr/local/lib/liblvrtdark.so.9.0: undefined reference to `std::basic_istream >& std::basic_istream >::_M_extract(double&)@GLIBCXX_3.4.9'/usr/local/lib/liblvrtdark.so.9.0: undefined reference to `std::basic_ostream >& std::basic_ostream >::_M_insert(double)@GLIBCXX_3.4.9'/usr/local/lib/liblvrtdark.so.9.0: undefined reference to `std::basic_istream >& std::basic_istream >::_M_extract(float&)@GLIBCXX_3.4.9'/usr/local/lib/liblvrtdark.so.9.0: undefined reference to `std::basic_ostream >& std::basic_ostream >::_M_insert(double)@GLIBCXX_3.4.9'collect2: ld returned 1 exit statusmake: *** [test] Error 1
  

  Running ldd reveals that liblvrtdark.so.9.0 is used for the execution of labview.

  In order to investigate on what could be the cause of the problem, I have compiled the nidaqmx basic examples, and I don't have an error. Current running ldd as reveals that he uses liblvrtdark.so.8.2 for the view of laboratory, time of execution.

  My suspicion is that some components of labview are being compiled with gcc 3.4 while others are being compiled with gcc 4.1 (which is the default compiler in RHEL 5).

  Any ideas how I could fix the build errors?

  Thanks in advance for your suggestions.

  PS.

  I enclose a tar file with the source files and here are the details of the ldd:

  ldd build/square.so         linux-gate.so.1 =>  (0x008de000)        liblvrtdark.so.9.0 => /usr/local/lib/liblvrtdark.so.9.0 (0x00b9c000)        libc.so.6 => /lib/libc.so.6 (0x00110000)        libstdc++.so.6 => /usr/local/lib/LabVIEW-2009/patchlib/libstdc++.so.6 (0x009a7000)        libm.so.6 => /lib/libm.so.6 (0x00756000)        libdl.so.2 => /lib/libdl.so.2 (0x00256000)        libpthread.so.0 => /lib/libpthread.so.0 (0x0025a000)        /lib/ld-linux.so.2 (0x00b80000)        libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x00272000)
  
  ldd /usr/local/natinst/nidaqmxbase/lib/libnidaqmxbase.so.3.3.0         linux-gate.so.1 =>  (0x00e50000)        libnidaqmxbaselv.so => /usr/local/lib/libnidaqmxbaselv.so (0x00248000)        libc.so.6 => /lib/libc.so.6 (0x00689000)        /lib/ld-linux.so.2 (0x00b80000)        liblvrtdark.so.8.2 => /usr/local/lib/liblvrtdark.so.8.2 (0x00e51000)        libdl.so.2 => /lib/libdl.so.2 (0x00813000)        libpthread.so.0 => /lib/libpthread.so.0 (0x001b0000)        libstdc++.so.5 => /usr/lib/libstdc++.so.5 (0x009c7000)        libm.so.6 => /lib/libm.so.6 (0x00b0a000)        libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x0050c000)
  

  Hi mimi,

  I'm happy to report that I managed to get the code to work. I have included some of the steps I experienced the problem in case it might help improve the documentation or future generations.

  In response to your question about the "error 1" reported by do, it's just an indication that detected a compiler error (it probably resembles the return code of the compiler).

  The errors ' undefined reference... @GLIBCXX_3.4.9 "have been narrowed down. The generated labview shared library, the square.so, links to /usr/local/lib/LabVIEW-2009/patchlib/libstdc++.so.6 which is a symlink to usr/local/lib/LabVIEW-2009/patchlib/libstdc++.so.6.0.9. I decided to compare this version of libstdc ++ that included with RHEL:

  strings /usr/local/lib/LabVIEW-2009/patchlib/libstdc++.so.6 | grep GLIBCXXGLIBCXX_3.4GLIBCXX_3.4.1GLIBCXX_3.4.2GLIBCXX_3.4.3GLIBCXX_3.4.4GLIBCXX_3.4.5GLIBCXX_3.4.6GLIBCXX_3.4.7GLIBCXX_3.4.8GLIBCXX_3.4.9GLIBCXX_FORCE_NEW
  

  strings /usr/lib/libstdc++.so.6 | grep GLIBCXXGLIBCXX_3.4GLIBCXX_3.4.1GLIBCXX_3.4.2GLIBCXX_3.4.3GLIBCXX_3.4.4GLIBCXX_3.4.5GLIBCXX_3.4.6GLIBCXX_3.4.7GLIBCXX_3.4.8GLIBCXX_FORCE_NEW
  

  So libstdc ++ RedHat does not include a string for GLIBCXX_3.4.9.

  With this in mind, I was able to get my test application to compile using the version of LabVIEW libstdc ++ using the following makefile:

  .PHONY: all cleanCPPFLAGS=-I/usr/local/natinst/nidaqmxbase/include -I/usr/local/natinst/LabVIEW-2009/cintoolsLDFLAGS=build/square.so \        /usr/local/lib/LabVIEW-2009/patchlib/libstdc++.so.6 \        -Wl,--rpath -Wl,/usr/local/lib/LabVIEW-2009/patchlib/
  
  all: test
  
  clean:        rm -f test *.o
  

  When you try to run the application, I got the following error:

  ./test: error while loading shared libraries: /usr/local/lib/liblvrtdark.so.9.0: cannot restore segment prot after reloc: Permission denied
  

  But apparently, it's because of SELinux prohibiting the use of libraries shared with moving text.
  This can be disabled by running /usr/sbin/setenforce 0 as root.

  The test application now works!

  See you soon,.

  RW

• Communication Serial Port with PIC

  Dear all.

  I am interfacing the labVIEW to an eeprom controller PIC, where I need to input data user to store in a location memory EEPROM, according to my condition that I've done programming the pic and it works very well with hyperterminal, at the same time I need to do with a labVIEW using communication serial port VISA , but when I did I receive a warning in 1073676294 that cannot be ignored, but I am not able to write user data to EEPROM by labview but I can do it to hyperterminal, please someone help me on this.

  Charron a G

  I was interfacing to pictures for a while, and the example that you have to build from was the same that I used. First, move the initialization OF THE outside of the loop. No need to re-initialization of the COMM PORT every 750ms.  Inside the code example, there is an expectation of 500ms between WRITING and READING (it is hardcoded for now, you brought it out on the ICON).  So time total is 750ms loop over the 500ms wait (more traffic comms), FYI.

  You do not use a return of ramasseherbe (13) or a NEWLINE (10) as a dismissal. You use a SO (14). Unless you're on a triggering a 14 ASCII in the PIC, the PIC will never see the "end of the chain of command" to analyze out. I have attached a good routine of init (IMO) I re - use on all my PIC projects, take a look.

  I use compilers Mikroelectronica MikroCPRO and displayed a complete interface of the UART (triggers on a CR (13)) on their site LIBSTOCK if you want to take a look at the side of the PHOTO of my work.

  http://www.libstock.com/projects/view/250/RS232-interrupt-driven-command-based-interface

  Steve

• pci6229

  Hello

  I have a PCI-6229 M Series Daq and a panel of connector BNC-2110. The specification PCI-6229 said he has 4 analog outputs. I can access it just find AO 1 and 2 of the AO. I need to access A0 3 or 4 A0. View of laboratory does not error, but I get no signal off AO3 or 4 AO. I can access all the 4 analog outputs on the BNC-2110 login Panel?

  Have you read the manual? It is said that you can use AO0 AO1.

• characters of VISA not in ascii

  I use ARM Cortex microcontroller. I send you the numbers in the display of the laboratory via usb port.

  In this case, the strings from VISA Read are not ascii, but I can convert them to unsigned int with the help of the uint premitive string.

  The numbers must be sent are continuous and they consist of u8, u16 and also float values.

  The problem here is the conversion. only these value that are defined as u8 appear correctly.

  How to convert the appropriate values.

  For example if the value is greater than 255 but whole, I should be able to read and view.

  If the value is float I should be able to view the number of good float.

  I also tried with scan chain premitive, also the number premitive string. They can only read ascii and convert, but the characters I'm conversion are not ascii.

  Like the characters I get boxes and a value of 0, they are empty.

  To convert a number in ASCII in my microcontroller might also be possible, but the requirement here is with a view to laboratory. Microcontroller currently has the huge load of programs.

  I'd be happy if someone help me forge in this.

  Thanks in advance.

  Hi fhs.

  '300' is stored in two bytes with LSB First: 44 + 1 * 256 = 300. As mentioned previously, you can use "join the numbers' to achieve the desired result.

  -'1' is perhaps stored in just one byte, but that is not clear in your photo.

  '1.23' is probably stored in 4 bytes (or 8?), but is not also clear your photo...

  To show more data. And switch the output string for 'view hex', before taking the 'grass '!

• Help me design the thing needed...

  Hello

  Please, someone give me idea to do the surgery. The VI attached shows the (regulated) control box on the front with some text boxes below. So, now I want to do when the user clicks on the checkbox (or regulated) I want to display two last text boxes with labels before and when it is off (off or unregulated) I want to display the first six areas of text with tags front. So, when the user attempts to enter the alphabets in the textboxes, it shouldn't take these and give the error message as only numbers are allowed. Attachment is here and please someone who can do it for me. I'm really new these view of laboratory and research of big help. (As to burst---> current limit)

  Please help me.
  Please help me that I would not lose 3 days for this and I found nothing. Looking for a great help.

  
  

• Stock price

  As a contributor I find the prices absurd - I get between 10 and 40 cents per image, with no idea why even the same image of fresh fillets a different amount in licensing. Why are these images being almost given so cheaply? There is no better way to devalue anyone's work (and a support as a whole) than to charge literally pennies.

  Can someone explain the logic underlying the pricing structure - not even clear what it is, or why I'd get a different amount for the sale of the same image.

  Of course, there is no way (that I could find) to ask someone from Adobe directly on anything...

  Hello Dennis,.

  Thanks for your question. There is no way you get 10 cents per image, but I understand your point of view. The commission structure is 33% of the price paid by the image. The purchase price varies according to the number of images that the client agrees to purchase. For example, if they want to just purchase a license costs $9.99 so your commission is $ 3.30. However, if they sign up as big as the $199.99 for 750 downloads, the number of licenses increase and the cost per image falls down for the customer. This benefits the photographers with the overall volume of licenses purchased. For these large subscriptions, there is a minimum amount in place which is set by your rank. Your commissions earned will never go below this amount. Your ranking is determined by the number of images that you sell. The more you sell, the higher your grade. More your rank, the higher the minimum commission amount.

  When you get started first of all, I understand and know first hand that pay you special attention to individual sales, so it may be surprising to see a commission of 25 cents. As time passes, and your portfolio grows, many found that the overall volume of sales and the net amount deposited in their account at the end of the month is where she is paid.

  It takes time, determination and hard work, but there is literally no limit to how much you can earn if you are ready to commit. There are photographers who are proposing a few pictures here and there and make a little money here and there and they are cool with that. There are others who work hard, create stellar content and produce on a consistent basis that make an income stock shooting seriously.

  I sincerely wish you and do not hesitate to reach out to me directly if you have any other questions, comments or concerns.

  You can find additional information about the commissions at this link: account and payment information

  -Mat Hayward

  E-mail: [email protected]

• You do not have access to the schema that you import

  Hello

  I have been using Apex for a while with no problems but just today, I tried to create a form based on a table and got this error. - , you do not have access to the schema that you import.  Import impossible.

  The table in question belongs to a different schema, but the Apex, the analysis of schema has access too it. (And I've created forms on this Board in the past)

  Someone point me in the right direction?

  Version 4.2.2.00.11 on 2008R2.

  Thank you

  My first thought is the 4.2.2

  I did some tests in the past, and some of the assistants have been bug fixes related to permissions issues like you describe.  If the same operation may work as expected in 4.2.3.

  Saying - 'don't do a upgrade..' can sometimes be of any help...

  Have you tried to create a view of the table using the complete Wizard?

  My suggestion:

  -Create a view with the same structure as the table

  -Run the wizard so all elements on the page are created

  -Adjust the source for DML processes on the page for the synonym table or owner.table you're trying to do.

  -Delete the view that it is no longer necessary.

  It is just a workaround, but could help you.

  -Tim St.