It is impossible to install no matter what Microsoft OS due to reboot loops

Similar Questions

• I had a hard drive fail.  After I replaced it, I am unable to get CS6 to install no matter what I do.

  I'm on a PC under win 8.0 my installed drive isn't V, C and I can't install to C because it's a small SSD.

  After watching for resource monitor win 8 (that's his name) and still nothing happens, I started over.and the files placed in a sandbox to see what was going on... to see it worked perfectly.  must have a file corrupted somewhere, thanks for all your help.

  Kelly

• G245 G3 HP LAPTOP: Windows cannot INSTALL no matter WHAT DRIVERS ON x 86 based pro system MODEL No. 10. G3 G245 HP NOTEBOOK

  I installed windows 10 x 86 system based on my notebook G245 G3 pro, I can't find the drivers from the HP website.

  I've tried to get 8.1 pro 64-bit drivers, but they do not work with win 10 pro 32 bit operating system.

  Please help me in this regard.

  Thank you & best regards

  I like hp and its supports

  MD stripes Ahmed

  consumer

  Hello

  Almost all of the sellers will not release hardware for Windows 10 drivers until Windows 10 is officially released (not an extract). 10 Windows needs to install drivers for your machine after a few updates. Windows 10 can find all drivers (except one: fingerprint) for my machine for 5 years. "He should be able to find the drivers for the newer machines).

  Kind regards.

• I can't get Adobe Flash installed no matter what I try. Help

  I tried about 10 times to install Flash Player on my computer.  It says it is installed successfully, but I still can't play and video accessories to my emails or even MSN.  I'm desperate and go crazy trying.  PLZ HLP!

  First of all, try to enable Active Scripting in the areas of Sites Internet Options, security settings, trust.

  You should also add a corrupted on.

  Click Start, type: Internet Options

  Press enter

  Select the "Advanced" tab

  Under reset Internet Explorer settings, click "reset".

  This should restore the Internet Explorer default settings.

  Then reinstall Flash Player

  http://get.Adobe.com/flashplayer/

  ----------

  Flash Player

  Troubleshoot installation of Flash Player for Windows

  http://kb2.Adobe.com/CPS/191/tn_19166.html

  Troubleshooting player stability and performance

  http://blogs.Adobe.com/JD/2010/02/troubleshooting_player_stabili.html

  Uninstaller

  http://kb2.Adobe.com/CPS/141/tn_14157.html

  Flash Player Support Forum

  http://forums.Adobe.com/community/webplayers/flash_player

• Impossible to install the software for microsoft lifecam cinema 3

  I can't get the software to install.  Abandonment keeps telling me that there is another incomplete installation pending.  Here's the exact message:

  Setup cannot continue because another installation is already in progress.

  I don't have any other facilities pending.  I rebooted and rebooted several times.   Using Vista.  The unit works fine, but I don't have the software to do things with him cool because I can't seem to install.  And I can't contact the Microsoft support because I can not find the product ID number anywhere.  Very frustrating.

  • What you have already tried to solve the problem

  Hello crazypokemon,

  Thanks for posting on the Microsoft answers Forums.

  Sometimes computers do not always perfectly work as expected, and we need to make changes to get the equipment to work.

  Since you get an error message when you try to install the Lifecam software and States error installation is already in progress, I would like to use the Windows Installer Cleanup tool. Click here to download the cleaning tool. You can use the utility to remove installation information for programs that were installed by using Windows Installer. Remember that Windows Installer CleanUp Utility does not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall on.

  Once you have installed the tool, right-click on the installation executable and select "Run as Administrator". Then a list of programs is listed. Select the Lifecam software you want to uninstall. This will remove all corrupted files installation. Then restart the software installation.

  Hope this will help get your software installed and working tools.

  Thank you, Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Impossible to install the software for Microsoft LifeCam Vx-800 on Windows Vista

  I can't install my product. I check in every folder in my computer, after I plug the LifeCam and it still does not appear.

  Hello

  I suggest you read the following article and check if this solves the problem.
  
  Troubleshoot failures to find the new LifeCam hardware.
  http://support.Microsoft.com/kb/929087
  WARNING:
  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/)
  How to back up and restore the registry in Windows
   
   
  I hope this helps.
   

• I tried to install the latest version of itunes with windows 10 but he said "there is a problem with the installation package. A program to complete the installation could not be executed. Please contact the support staff. No matter what guys?

  I tried to install the latest version of itunes with windows 10 but he said "there is a problem with the installation package. A program to complete the installation could not be executed. Please contact the support staff. No matter what guys?

  (1) temporarily disable your security/antivirus software

  (2) download iTunes from the official source: http://www.apple.com/itunes/download/

  (3) try to reinstall

  (4) turn on your anti-virus

• HP Photosmart e-All-in-On 6510: can't install drivers Photosmart HP 6510, no matter what I try

  WIndows 10

  HP Photosmart 6510 e - all-in - One Printer - B211a

  So I've had problems printing from my computer wireless for centuries now. It seems that it only prints when he feels like it, don't know what to do to solve this problem, and do not know what I do to break.

  After laughing with the inhabitants of problems that I get when I try to print, I tried updrading the driver because there was an update available.

  First of all, I used the HP Installation Wizard, it would be about a minute or two in the download and just freeze. After a bit, he'd say he didn't and I had the opportunity to try again.

  After a few failed attempts this, I tried to download manually (using chrome) Web site, the download appears at the bottom of my browser and the beginning, but then after a minute or two, it would again, freeze. Leaving, it comes with an interruption of network error. I have tried both installing the software driver that is full of features, and then the base a few times. None worked.

  Tried to install HP Print and Scan doctor after reading a few articles support. But even once, uploading manually or via the installer of HP you freeze at some point and not work.

  After the age of back and forth between trying to get a single download to work, I open the HP Support Assistant App on my computer. It detected my printer and I added it. He had a mark 'important' and wanted to update my driver, tried to do it is there, started the download, the bar would go up a little, then stay at the download percentage.

  After a bit more supported pages, I uninstalled my driver curent computer, he got the error "Installation error 2081883401: failed to uninstall the device with serial number". "." Press you on ignore, he completed the uninstall, and then I restarted my computer.

  The aircraft has disappeared from my programs and the list of software (so I can't uninstall it again), but he still gets detected with HP Support Assistant, HP Print and doctor Scan that already seemed to be installed via the Support Assistant (don't know if this is normal).

  No matter what I try to do to download the latest driver from HP servers, just download stop and remain unchanged, at some point, until I cancel it or an error message appears, any program, I try to download it through.

  Don't know what I can do at this point.

  Any help would be appreciated

  -Josh.

  EDIT: well, I got it working again. Don't know what I uninstalled. Had to manually detect his IP through windows settings, and now it's just call itself class driver. Don't know why, but at least it works. Still can not update drivers through HP servers however.

  Hi @InterstellrJunk,

  Please become a member of the HP's Support Forums. I understand that you have a problem with the installation of wireless printer. I'll be happy to help you.

  Here are a few documents to help.

  Occur after Windows 10 upgrade, printer problems

  Printer not found during setup of the network (Windows) driver

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution. To simply say thank you, click the Thumbs up below!

  Thank you.

• IPhone driver will not install in VISTA - little matter what I do!

  I spent 10 hours today trying to get my ipod touch recognized on my laptop once again online, because it does not appear in windows or itunes.  I followed all the suggestions of the apple on the drivers page and the pages of microsoft, including reinstallation of itunes, to try dozens of times to reinstall the driver.  Can I said that legacy is an ov534 of camer apollo Omnivision, when it's really an ipod touch.  No matter what I do, the driver fails.

  All advice gratefully appreciate it, other than to try to reinstall the driver.

  I saw a thread somewhere on a file is missing, but I don't have a clue as how to do the copy of one part of Vista to another file that they were referring to, as I'm not really tech savvy.

  Thank you.

  Hello MassMom,

  I don't know if you have tried the steps listed in the article. I see that you can install file USB if the phone is detected as a camera.

  Here is a link you can follow:

  http://support.Apple.com/kb/ts1538

  I also suggest that you post your question on the forums for discussion of Apple a better answer to your question.

  http://discussions.info.Apple.com/category.jspa?categoryID=201

  Important note: this response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• We have a laptop of Dell Precision 3510 and no matter what has been done, we could not install an o/s of DVD or USB.

  Hello, we have a computer dell laptop 3510 that no matter what we tried, we were able to install the Windows 7 64-bit enterprise edition. I have worked with Dell on this same they couldn't get it to work., we are past the UEFI BIOS for Legacy and had the right to RAMA and there was the third thing that I have a hard time recalling, I think it's boot on CD, and the setting has been set successfully. We spent hours trying to do or not this result. I tried the DVD and USB, at one point, it looked as if he was going to install the o/s, but we got a box that came to ask us to search for the drivers, I could see the "C" drive and the 'X'

  He asked to load the driver, but no matter what we tried, it didn't work. Here I could get. I even ran the F6 drivers utility, and it was still a no-go.

  I had to try it with another PC, but when I went from UEFI for legacy it was as if he had no BONES at all and I had to switch back.

  

  There is no way that this was done to distance - it requires too much manual intervention.  I suggest you start by following the process above (or use the image below the link, but it's not going to be 7 Enterprise, but Pro).

  www.dell.com/.../SLN301133

• I have windows 8 in my computer toshiba laptop. After you set up windows for the updates it says «restoration of the changes...» Impossible to install the important updates'... What do I do?

  I have windows 8 in my computer toshiba laptop. After you set up windows for the updates it says «restoration of the changes...» Impossible to install the important updates'... What do I do?

  Hello

  Please, try the suggestions mentioned here and see if they help you:

  http://www.thewindowsclub.com/failure-configuring-Windows-updates

  Hope this helps, good luck :)

• Hi everyone, Q: no matter what I do I install Muse in English, and the cloud Manager downloaded in Dutch, other programs are installed in English but Muse, reasonable please help.

  Hi everyone, Q: no matter what I do I install Muse in English, and the cloud Manager downloaded in Dutch, other programs are installed in English but Muse, reasonable please help.

  You can change the interface language user in Muse by throwing Muse and no .muse file opened, go to preferences and select the new language. Then quit and restart Muse for the language change to take full effect.

• Impossible to install Vista Service Pack 2 (0x80070005)

  Hi, I tried to install SP2 on my current Vista Home Premium SP 1.  However, no matter what I try, I receive the ERROR_ACCESS_DENIED.  And I tried several ways, including:
  System Update Readiness Tool v4, and v7, then remove Windows Update files, reinstalling windows update, check the COM security settings, run as "Administrator" etc.

  I can't make it work!  I have attached the portion of my cbs.log newspaper:

  2010-03-09 11:49:10, info CSI CSI 1247136 (0x001307a0) store initialized 00000005
  2010-03-09 11:49:10, CBS Session info: initialized 30064552:1896269760.
  2010-03-09 11:49:11, info CBS SPI: Parent KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18000 to SP2 package with install state 7
  2010-03-09 11:49:11, CBS information session: 30064552:1896269760 finalized.  Reboot required: no
  2010-03-09 11:49:11, CBS briefing: initialized 30064552:1902821760.
  2010-03-09 11:49:11, error CBS SPI: (CSPICbsClient::EnumPackages:63) Impossible to enumerate CBS packages hr = 0x80070005
  2010-03-09 11:49:11, error CBS SPI: (CSystem::EnumerateCbsPackages:313) could not complete CBS package list, hr = 0 x 80070005
  2010-03-09 11:49:11, CBS information session: 30064552:1902821760 finalized.  Reboot required: no
  2010-03-09 11:49:11, info CBS SPI: could not enumerate the packages CBS
  2010-03-09 11:49:11, error CBS SPI: (GetLatestVersionFromCBSStore:135) ATL exception hr = 0x80070005
  2010-03-09 11:49:11, error CBS SPI: (CSPCInstallTask::ApplicabilityScan:712) could not get the latest version of VistaSP2-KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005 hr = 0 x 80070005 store
  2010-03-09 11:49:11, error CBS SPI: (CSPCInstallTask::ApplicabilityScan:700) did not make an analysis of the applicability of the SP bound for package Windows6. 0-KB955430 - x 86 .cab hr = 0 x 80070005
  2010-03-09 11:49:11, error CBS SPI: (CSPInstall::CompatibilityApplicabilityScan:1056) failure of verification of the applicability of the tasks of HR = 0x80070005
  2010-03-09 11:49:11, info CBS SPI: scan ending Compatibility\Applicability
  2010-03-09 11:49:11, error CBS SPI: (PerformSPInstallation:764) cannot install MS using IU hr = 0x80070005
  2010-03-09 11:49:11, error CBS SPI: (wmain:1059) could not run SP installation hr = 0 x 80070005
  2010-03-09 11:49:11, info CBS SPI: event reports failed
  2010-03-09 11:49:19, info CBS SPI: SPInstall terminating, return code 0 x 5

  Error code 0 x 80070005 is also described as ACCESS DENIED (you may not to install updates).

  Please check that you are logged into an account with administrative privileges.

  Please follow these instructions if you encounter this error code during checking or install updates via Windows Udpate.  What follows applies only to Windows Vista.

  1. Download AccessChk (Sysinternals).  This tool allows you to assess the level of access of some users or groups of resources, including files, directories, registry keys, global objects and Windows services.  Here is the link to download the tool: http://technet.microsoft.com/en-us/sysinternals/bb664922.aspx

  2. save the zip on your desktop and extract the file:
  -Right-click on the file and select extract all...
  -Click Next when prompted for the Destination.

  Therefore, you should see a folder called AccessChk on your desktop.

  3. open the folder AccessChk

  4 press and hold the shift key and right-click in the window.  Select "open here command prompt.

  5. a command prompt window should open a similar message:
  C:\Users\\Desktop\accesschk >

  6. type the following command and press ENTER:
  "" AccessChk.exe "nt service TrustedInstaller" s - n k ' hklm\software\Microsoft\Windows\CurrentVersion\Component Based Servicing "> accesskchk.txt
  Tip: You should be able to copy and paste the command into the command prompt.

  7. close the command prompt window.  Open the Accesschk folder on your desktop (if it has been closed).

  8. double-click on Accesschk.txt (text file), it should open Notepad.

  If this is insufficient,

  1 if please download the subinacl.msi from the following link and save the patch to installation on the desktop:
   
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=e8ba3e56-d8fe-4A91-93Cf-ed6985e3927b&displaylang=en#AffinityDownloads
  SubInACL (SubInACL.exe)
   
  2. go to your desktop and double-click on the downloaded file.
  3. Please select the C:\Windows\System32 folder as the Destination folder during installation. Later, we will use this tool to reset the permissions on the current computer settings.
  4. click on the button 'Start' in the 'Search' bar type: "Notepad" (without the quotes) and press ENTER.
  5. copy the following commands, and then paste them into the opened Notepad window:
   
  off @echo
   
  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = administrators = f
  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = administrators = f
  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = administrators = f
  Subinacl % lecteur_systeme % /subdirectories / Grant = administrators = f
  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = system = f
  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = system = f
  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = system = f
  Subinacl % lecteur_systeme % /subdirectories / Grant = system = f
   
  @Echo =========================
  Completed @Echo.
  @Echo =========================
  @pause
   
  6. After you paste the above commands, please close the Notepad window. Choose "Save" when you are prompted to save the file. Type "reset.bat" as the file name and choose "Desktop" in the Panel on the left as the save location.

  7. refer to the desktop and right click the reset.bat file, then choose "Run as Administrator".

  8. you will see a window of type BACK treatment.
   
  NOTE: It may take several minutes, please be patient. When it is finished, you will be prompted with the message: "finished, press any key to continue."

  Note: On some driver update installation procedure, we also received this error code, please redirect this kind of case to the Team System Vista, because it can be considered for structure of third-party programs.

  Look for updates after that.

  Hope this information is useful.

  This problem may be caused by third-party security programs such as firewalls and antivirus software. You can disable or remove to check the issue.

  From: Microsoft Answers Support Engineer
  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  TaurArian [MVP] 2005-2010 - Update Services

• Almost all cases no matter what programs run almost 100% of the CPU running.

  Hey guys I have a problem I could use some help with.

  I have a Dell Studio 1555 laptop

  Windows Vista Edition Home Premium 64-bit

  4 GB of Ram

  Intel Duo Core T6500 @ 2.1 GHZ

  I've had this laptop over a year now and it works perfectly but around a week ago, he went a little out of whack.

  Basically, no matter what programs are running my CPU usage will be 90-100%, which makes the laptop almost impossible to use.

  It comes and goes a bit, but for the majority of the time is around this margin. (for example I wrote that his party up to 10% once again, little about what I expected, but it will rocket upward again in a few minutes)

  The strange thing is that it doesn't seem to be a program or .exe using all CPU. Sometimes odd things as Dell Dock (which must use almost nothing) use up to 40% and if that gets closed or temporarily fixed things like explorer.exe, svchost.exe or whatever happens to be executed at the moment when will start using more CPU and look back up to 100%.

  Only, this started happening recently and I have no idea what made him... Any thoughts?

  Thanks a lot for all the suggestions/help

  (and just a quick update)

  My computer stopped a few times now unexpectedly as well and do not restart for 10 minutes. Once again, no idea why... The back of it felt very hot but I wonder if a fan issue could play a role?)

  Hello

  Heat can be the cause where the result of the CPU running so high. Make sure that the vents are clear and
  try adding a small fan blowing in the wind (or at least through them) to see how effective that has
  on the question.

  Check with a computer store real (not of leeks and glances at a Best Buy or other department stores) or Dell
  Support and Forums for known issues.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  ---------------------------------------------------------------------------------------------------------------------

  This is a tool for troubleshooting to see if the software is part of the question - start with a clean boot.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• No matter what I do on firefox, I get a message that the action is not reliable. How can I fix it?

  I started this morning, opens Firefox as usual. The normal task bar has been replaced by a taskbar of Bing. I couldn't get rid of him. So, I tried to reset Firefox. The taskbar of Bing was not deleted. I uninstalled firefox and downloaded the latest version and installed. I also uninstalled the taskbar of Bing as found in my list of programs. I opened Firefox and no matter what I select on the menu or on a website a message appears saying that the site is not reliable. It is as far as I can get in Firefox! The message arrives even for internal actions within Firefox. How can I fix it. It's very frustrating!

  Make a check of malware with several malware scanning of programs on the Windows computer.
  
  Please scan with all programs, because each program detects a different malicious program.
  
  All of these programs have free versions.

  Make sure that you update each program to get the latest version of their databases before scanning.

  • Malwarebytes' Anti-Malware:
    http://www.Malwarebytes.org/MBAM.php
  • AdwCleaner:
    http://www.bleepingcomputer.com/download/adwcleaner/
    http://www.Softpedia.com/get/antivirus/removal-tools/AdwCleaner.shtml
  • SuperAntispyware:
    http://www.SUPERAntiSpyware.com/
  • Microsoft security scanner:
    http://www.Microsoft.com/security/scanner/en-us/default.aspx
  • Windows Defender:
    http://Windows.Microsoft.com/en-us/Windows/using-Defender
  • Spybot Search & Destroy:
    http://www.safer-networking.org/en/index.html
  • Kasperky free Security Scan:
    http://www.Kaspersky.com/security-scan

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • Utility anti-rootkit TDSSKiller:
    http://support.Kaspersky.com/5350?El=88446

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked