It's 2016, but find a hub USB 3 seems difficult.
It's 2016, but find a hub USB 3 seems difficult.
Guess I'm of an age where I need grandchildren to send a few years so that they can longer hold the technology of their grandfolks...
Have spent time not a little online shopping for a usb hub powered to an iMac that reviewers find reliable and - this is the problem that I don't have the knowledge to understand - will support an auxiliary hard drive without cutting into the speed of the drive. I am a bit taken aback that people report problems of reliability and compatibility here in 2016, and even less accurate recreation the USB socket at the back of the iMac via a hub powered and wired to a few inches apart.
Recommend a product?
Very grateful.
I have a powered hub Plugable (bought on Amazon). It's USB2 but I remember it being a USB3 version with reasonable comments.
I think that people are more likely to write a comment if they have a problem so exams can be negatively biased a little. I read the reviews, but I also analyze them. A bit of any product may encounter problems for one thing, I'm looking for, that's how the company manages these products.
Another thing to keep in mind is how the hub is intended to be used. If someone posts a bad review because they tried to load 8 iPads to a hub powered at the same time, well I think you'll be lucky to find a hub that can do. Hubs can have many ports, but the power supply is usually limited and not designed to provide full amperage to all ports at the same time.
Tags: Mac
Similar Questions
-
I tried to install drivers in my new pc and I almost did. But I can not find the driver HUB USB 3.0 (that is listed as "unknown device").
Another problem in the function keys. They do not work. So I need to install the driver of access keys
I have tried many on the internet until now, I can't able to find drivers for my computer so please suggest a useful site to download the two drivers.
Hello:
For the question USB 3, download, unzip and run the file setup.exe from the link below.
See if installing this software gets the Fn keys to work.
This package contains the HP System Event Utility, which allows the special function keys on the laptop to program models. For example, HP System Event Utility allows users to press the Fn + ESC keys to view system information. This package is provided for the supported models running a supported operating system.
-
recently installed xp pro but can't find driver for usb controller any help please model nx6325
recently installed xp pro but can't find driver for usb controller any help please model nx6325
Welcome to the HP Forum!
edgeville wrote:
recently installed xp pro but can't find driver for usb controller any help please model nx6325
All the Windows drivers for your laptop are on Portal support business web users for your laptop HP. In the drop-down list, select Windows XP. It's an operating system supported so reinstall drivers.
Check the Basic Input/Output System (BIOS) for Legacy USB Support. To do this, follow the procedures below:
- Restart the computer.
-
Hub USB no longer works on IMAC
This has happened twice now. I bought a powered USB hub gear and it worked for a few weeks then stopped working. I bought a different model, a new, and he also worked for a few weeks and then stopped. I tried to reset the SMC, and I think I have done correctly, but that no longer works. I tried to plug the buh on another computer and it worked fine- but not on the Mac. What is happening here. Any suggestions?
The first thing to try is to do a reset SMC 2 - 3 times back to back with all the perihpherals disconnected. If this does not work then it may be one of the devices connected to the hub. You should try to see if it's a device by trial and error.
If all else fails I would swap your gear for one of the hubs USB Belkins. I've never had a problem with one of my friends.
-
Hello.
I am building an application that can find a PnP USB audio device and play a tone if the device is connected. I am able to search audio devices using "Sound Device Info.vi" of the lvsound2.llb that comes with labview.
The vi can find the USB device in good conditions, but there are problems - I'll try to describe 2 scenarios.
1. the USB device is connected before 'Sound Device Info.vi' is called for the first time.
In this case, the program can find the USB device. If I unplug it, the device disappears from the list of found audio devices. If I reconnect to the same USB port, it reappears in the list. It's all good.
If I reconnect it however a new USB port, the device is not found. This is not good.
2. the USB devices is not connected when 'Sound Device Info.vi' is called for the first time.
"Sound Device Info.vi" is not able to find the device. Disconnect and reconnect does not make a difference.
I'm under labview 2012 on windows 7.
I am running the application as an exe to build.
I call 'Sound Device Info.vi' as a 'call for reference"and the reference is closed between calls to the vi. I was hoping this would unload the dll used in "Sound Device Info.vi" and would solve the problem, but it didn't.
Is there a way to reset the information usb labview during execution?
Concerning
Stephan.
Hey Stephan.
The sounds screws require a DLL located in:
C:\Program Files (x 86) \National Instruments\LabVIEW 2012\resource\lvsound2.dll
Internally, LabVIEW uses the DirectX API to enumerate devices. The one caveat is that probe us for devices when loading the DLL. We probe not later. So that it works for Bluetooth, USB, fire wire, etc. devices that can be inserted or removed at any time, you control somehow when this DLL charge and discharge. To do this, please see the following document:
Dynamically that I can load and unload a DLL in LabVIEW?
http://digital.NI.com/public.nsf/allkb/77594203D78D12278625729100758BE5
I would also recommend that you provide a Kudo to this idea:
Updated library lvsound2 (Sound Input/output Sound live) to support audio devices change on the fly
-
Hubs usb network fall randomly network
original title: I have 2 Iomega Iconnect network REPEATER MULTIPORT usb with 4 hard drives
the problem is that they work perfectly for a few days then I started having problems with one or the other falling out of the network, not only a hard drive but the whole hub sometimes restart the pc works, but it still doesn't work I reset the hubs by iomegas, help guide and who does not always either someone has answering this delima I attribute data that I really wouldn't lose.
Thank you all
Hi Randy,
1. how many computers are connected to your network?
2 you are trying to access the IOmega IConnect by wire or wireless?
3 are all computers on your network running Windows 7?
a. please specify example: Windows 7 Professional 32 bit.
4 to this problem with a particular computer or all computers on the network?
a. please indicate whether it is a simultaneous issue on the network or on a single computer at a given point of time only?
Please post the requested information for a better understanding of the issue.
-
I have some problems when connecting my hub USB for Windows 7.
Original title: Windows 7 & PnP...
I have some problems when connecting my USB hub (this is PnP)... I don't know Don t what the issue with windows 7 and PnP´s, but I ´ve read some info about it on the net saying that peripheral soe Pnp will not work on windows 7... So, what can I do?
Hello
1. What is the brand and model of the computer/hub USB?
2. what happens when you plug the USB hub to the computer?
3 - is it is not detected?
4. other USB devices work?
Response with more information to help you further.
The hardware which are not compatible with Windows 7 will not work with it. However, almost of hardware and software are compatible with Windows 7.
Step 1:
See if the USB hub is compatible with Windows 7.
http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx
Step 2: Run the following fix - it:
Hardware devices do not work or are not detected in Windows:
http://support.Microsoft.com/mats/hardware_device_problems/en-us
-
I have a late 2009 iMac. When I tried to upgrade to El Capitan. He said that the CHIP shows the h/d is a failure and can not be updated. I have install an external withEl of h/d Cap but it is very slow. the h/d is USB 3 but the iMac's USB 2. the h/d is only 5400 RPM. a 7200 RPM 7 / would accelerate the iMac?
No, because the limiting factor is the computer is USB 2.0, which is how it connects any external drive apart the external drive. As USB 2.0 is much slower, there is no real advantage to a 7200 RPM drive. What you need is a Firewire enclosure that supports FW800 which is much faster than USB 2.0.
-
I can't find a song in my itunes store, but when I search online it seems to be available? Please notify.
Also, when I select the option "view in itunes", it will open itunes but does not show the song I want... Here is the song im trying to get
It's tricky (DJ Fresh Remix) Run - D.M.C. -
Change outlook web mail
I'm going through webmail with cable cox to outlook or outlook express, but finds it difficult to get the emails to my wife separately from mine. Not sure how they get along with the different email address. I tried setting up separate accounts and profiles in outlook 2003 and have also tried to separate identities and accounts in outlook express 6. Any help would be appreciated. TKS Joe NovickI can't speak for Outlook, even if it is very similar, but if you have configured the real separate identity in OE, as in needing to switch identities with it, avoid a problem unless you use both the same e-mail address.
If you use different addresses to your identity, go to tools | Accounts and remove its identity. Vice versa in its identity.
I use Cox and were three addresses in the three identities without problem.
-
I try to send a fax by phone but can't find the software. It seems that I used to be able to do. But not today.
Thks, Emery
Post here instead-online http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_programs
-
I have NO USB DEVICES plugged into my computer. Yet, every half second, this obnoxious pop up with the sound that accompanies it, which makes my blood boil, has been annoying me since I bought my laptop. I have NO USB DEVICES plugged into my laptop. When I plug them in, they work fine. If I get this error more I can't promise that I will not beat my laptop to 1 million coins... Please for the love of Pete, someone tell me how to disable this dang thing!
Visually check the USB ports for dirt or the twisted wires. Go to the Device Manager and under Bus USB controllers disable the hubs USB one at a time and check if the problem goes away for each hub.
-
I bought lr 6 stand-alone disk and install it on my laptop. now I have a new iMac, but find that I can't install lr because it doesn't have a dvd player. How do we install?
Hi Etienne, you can download Lightroom 6 for Mac here: https://helpx.adobe.com/lightroom/kb/lightroom-downloads.html and activate it using the serial number supplied with the version that you purchased.
-
I worked with a license for more than a year and a half. It should expire in October 2016 but my cc told me all of a sudden I do not have a license and my trial is over. How can I fix it
Hello
Your Forum ID associated email address shows no subscription associated with it. Make sure you use the right email address to connect to cc.
You can also have a look at the following links for that matter.
Stop Creative Cloud 2015 to return to the mode of trial
The activation and deactivation of Adobe problems
Adobe Creative products Cloud launch mode test on non-English operating systems
-
Hello
It might make me totally distracted, but in the password protocol, it seems all sites want one and then somehow I've now changed my passwords? IE: Google, Microsoft...
Some people say that I need only a pswd for all sites?
Some say all change every month... you, the experts say?
Thank you
Hello
One of the worst things you can do with passwords is to have the same password for everything. For example, someone like a hacker finds your password by e-mail. You can use the e-mail address as username for several things, such as the online stores, financial sites, etc.. Once they know this address combination and e-mail password works on a single site, hackers can try on many popular sites. You are then not only your email hacked, but a lot of things.
There are more tips here:
http://www.microsoft.com/en-GB/security/online-privacy/passwords-create.aspx .
Maybe you are looking for
-
Peoblame download movies and applications update
I have that I upgraded to iSO 10 and I started to have problems to download update applications and television show is there a fix
-
I would like to set up my phone to be able to transfer the messages in the Messages. I'm sure that I'm connected to all accounts that I'm supposed to be connected to. In the Messages on my iPhone settings, I go to text Message transmission, and my Ma
-
How to send email with an attachment in Groovy?
I have a user that is running remotely a groovy script to extract data from the Foglight Server. When it executes this script, it has the ability to create a data file on the Foglight Server. I would like to add a feature where this data file is s
-
Hello I recently installed the latest drivers (AIO_CDA_NonNet_Full_Win_WW_130_140) for my HP Photosmart C4180, although the printer works like a copier and scans I can ' t feel of applications, I have Windows 7 running on a Dell XPS. I uninstalled th
-
Hello! I want to build a simple plugin that requires the use of RGB values, variables, and simple mathematical calculations.I have experience in programming the C-based languages, but have never programmed in C before. I started to pick up some of th