It's time to build a new machine?

Similar Questions

• Load the old version on the new machine through CC... possible?

  So if someone does not know why I need to do is read my older post (Re: work yesterday.) Crawling today.) or just look at the forum posts current 100 top of page about the updates at any time.

  In a Word, I am building a new machine super (so that Adobe can always copy paste their answer "it's your system" canned all my messages of future problem) and I have a big project (short film, hundreds of videos, tons of audio, many masks and CC) currently on an old machine using 2014.0 of the organism to unique Canon. I would like to know if it is possible for me to transfer the set of project/media files to the new machine and load it directly in 2014.0 single cannon on the new machine, so I can get this project completed and delivered without nary a hiccup before daring to smoke test the... > GULP! <... latest Organization on a much less involved/lucrative project.

  
  

  I feel like when the new machine is ready and I'm going to download body his will force the latest version on me... y at - it a way to select a legacy version? The latest version of loading and rolling back (as I did in my current situation) would work if the new machine never had the old version?
  

  Full disclosure I have ever transferred projects of new versions of the software, not to mention new machines in my life... so any idea that spell things out as if I'm in 8th grade would be greatly appreciated.

  Excelsior!

  Previous through Cloud http://helpx.adobe.com/creative-cloud/help/install-apps.html#previous

• Construction of a new Machine first, looking for an entry

  Hi all

  I am building a new Machine of first, and I'm looking at some of the entries from which direction to head in.

  My main question is what is more advantageous for a first machine. Less cores clocked more high, with more power CUDA, or more, lower the cores clocked, with less CUDA.

  Here are my two courses:

  1 chip to Intel 3930 k Sandy Bridge six core clocked at 4.5 ghz

  2 x Nvidia 680 GTX in SLI

  32 GB of Ram

  256 GB SSD

  2 x 1 TB WD Black Raid 0

  1 x 3 TB WD Green Backup

  or

  2 six main Intel E-1660 to 3.3 ghz

  1 Nvidia GTX 680

  32 GB of Ram

  256 GB SSD

  2 x 1 TB WD Black Raid 0

  1 x 3 TB WD Green Backup

  First take advantage of the SLI?

  Thank you for taking the time to read this!

  -Matt

  Haven't seen that any criterion of reference again, but wise (Bang-for-the-buck) RE-ENGINEERING, E-1660 to around $1 K each, as well as the additional cost of the cost of the motherboard, memory and the lack of overclockability makes the Xeon solution very unattractive. See also http://ppbm5.com/DB-PPBM5-2.php

  I guess a single K 3930 to 4.6 GHz will outperform always a double 1660, and that's why I came up with this: http://ppbm6.com/Planning.html

• If I build a new pc I can use my purchased copy of win 7 which is on another pc

  Hello people I'm looking for some information about win7. I bought win 7 Home premium releasing, it is a full version and not an upgrade "I currently installed it earlier as 32 bits, but I want to build a new machine. This machine would have 16 GB of memory requires a 64-bit operating system. so my question is can I install my win7 in 64 bit on my new machine if I scrap that or it back to vista?

  Thanks for any help on this
  harleyfatboy_uk

  Hello people I'm looking for some information about win7. I bought win 7 Home premium releasing, it is a full version and not an upgrade "I currently installed it earlier as 32 bits, but I want to build a new machine. This machine would have 16 GB of memory requires a 64-bit operating system. so my question is can I install my win7 in 64 bit on my new machine if I scrap that or it back to vista?

  Thanks for any help on this

  harleyfatboy_uk

  Yes you can, you may need to reactivate by phone if:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• New Machine of CS5 - anything look clumsy here?

  Looking to build a new machine for CS5 Master Collection

  I am far from being an expert on the material

  I'm not really all that interested in trying to overclock the things

  I just want to build a machine that works well with CS5 and is reliable

  Did anyone see anything wrong with the combination of items below?

  Thank you

  Mathias

  Motherboard
  ASUS P6T WS PRO LGA 1366
  Intel X 58 ATX Intel Core i7
  Card mother Xeon Intel

  
  Processor
  Intel Core i7-930
  Bloomfield 2.8 GHz
  LGA 1366
  130w Quad-Core
  Model BX80601930

  
  Memory
  Corsair Dominator TR3X6G1600C8D 6 GB
  3 x 2 GB PC3 - 12800 1600 MHz
  240-pin DDR3 Core i7 Memory Kit

  
  3 hard drives
  WD5001AALS 500 GB AT 7200 RPM
  Cache 32 MB SATA 3.0 GB/s
  1 - operating system
  1. other software
  1 - scratch disk

  
  Video card
  PNY NVIDIA Quadro FX 3800
  VCQFX3800-ELEM-PB

  Mathias,

  Looks good, by making two comments:

  1 consider going for 12 GB of memory.

  2 consider going for the GTX 480. There are more that double carrots at half price with a higher clock speed and will, according to some rumors, certified in Q3.

• Windows 7 Pro Full Retail Edition - building a new 64-bit machine.

  I installed and registered Win 7 Pro on a 32-bit computer. I have the full retail version, which includes a 32 and 64-bit installation cd

  Now, I want to build a machine separate 64 bit of all new components. I would like to install the 64 bit, Win 7 Pro just to the point where I can check that the construction of material and install Win 7 Pro worked.  I should be able to do it from the 64-bit installation CD.

  When a system of work is done, I can remove my 32-bit computer, install the software on my 64-bit computer and switch the recording of my 32-bit to my new install Win 7 64-bit.

  When I did my 32-bit installation on my current machine, I think I got a 30-day grace period to register for my 32-bit installation of Windows 7.

  This strategy works? Is there a grace period of 30 days? Who should I contact at Microsoft to move to the record?

  Ed Perry

  It would be helpful to know what version of W7's retail, you have (?)

  For example, I have W7 Pro retail.

  The COA license key is good for installation on my computer or any other 'one' computer.

  With retail W7 pro, I can use it to upgrade to a new computer, if my old one died or I just want a new computer (the old OS is more usable however).

  If the HARD disk drive dies I can replace the HARD drive and reinstall without worries.

  I can install 32-bit and in a year I can change to 64-bit (and vice versa if I want). There is no time limit on this for 30 days.

  There is a period of 30 days at the entrance of the key to the COA on the 32 bit or 64 bit OS, and not on the ability to switch.  32-bit is certainly 'old technology' now and also really limits your choice of 3 GB usable RAM Max!

  If your building a new computer, see my article "pinned" Tech PC first about 'breadboarding' a new build :)

  New generation of computer? Test the material first.

• First timer, 6 year, iMac, 10.8.6 w/4 GB Dungeon get a browser not support Gmail and our Netflix account home page extended graphics. Do we need a type of update or new machine?

  First timer, 6 year, iMac, 10.8.6 w/4 GB Dungeon get a browser not support Gmail and our Netflix account home page extended graphics. Do we need a type of update or new machine? We are novice and probably most bought when receive this machine. Help or direction would be appreciated.

  Safari on OSx! 0.6.8 Snow Leopard is now not supported on many sites.  If your Mac can support it, you can update a newer operating system, which will have a new version of Safari.

  Go to the Apple Menu-> about this Mac and tell us what Mac model you have so we can give you options.

• Error when installing SSO 5.5 on the new Machine

  I tried to install VMware vCenter Single Sign-On VMware-VIMSetup-all 5.5.0 - 5.5.0 - 1312299.iso, and like others, I have a problem. I want to install on a VM Windows Server Datacenter 2008 R2 SP1 64 bit new.

  The first time I ran the installer, I display Single Sign-On prerequisite vCenter and realized that my network on the new machine settings were a bit off. So I canceled the installation program, fixed my network, started the Setup program again and this time I got the message "DNS resolution is effective."

  Then I continued my way. I select "vCenter Single Sign-On for your first server vCenter Server", it starts to install, the State can "configure SSO components... "and then it shows" restoration of action: ", then"vCenter Single Sign-On the Setup Wizard ended prematurely because of an error. "All attempts to install later resulted in the same thing.

  I've seen some solutions proposed elsewhere, and I've tried:

  • Rename C:\ProgramData\VMware\CIS to CIS.old
  • Run (VMware-VIMSetup-all-5.5.0-1312299.iso)\Single Sign-On\prerequisites\VMware-python.msi (tried right click menu: repair and also uninstall then install))
  • In 'HKEY_LOCAL_MACHINE\SOFTWARE\VMware, Inc. \VMware Infrastructure', there is no SSOServer

  I have attached vim-sso-msi and vminst.log of %TEMP%. I also found a vminst.log of a directory longer % TEMP %; I joined who as vminst - Temp.log too, in the case where it is useful.

  Looking at newspapers, in vim-sso-MSI is towards the end:

  MSI (c) (28:DC) [14:08:39:385]: Note: 1: 1708

  MSI (c) (28:DC) [14:08:39:385]: product: vCenter Single Sign-On - Installation failed.

  MSI (c) (28:DC) [14:08:39:385]: Windows Installer installed the product. Product name: vCenter Single Sign-On. Product version: 5.5.0.297. Product language: 1033. Manufacturer: VMware, Inc. installation success or error status: 1603.

  It's the mid:

  MSI (s) (38:A0) [14:07:41:006]: op of execution: ActionStart (Name = BootstrapAll),

  Action 14:07:41: BootstrapAll.

  MSI (s) (38:A0) [14:07:41:022]: op of execution: CustomActionSchedule(Action=BootstrapAll,ActionType=11265,Source=BinaryData,Target=***,CustomActionData=***)

  MSI (s) (38:88) [14:07:41:037]: call for a custom action to distance. DLL: C:\Windows\Installer\MSI2A01.tmp, point of entry: VmSetupExecuteBootstrap

  MSI (s) (C 38: 5) [14:07:41:037]: generation random cookie.

  MSI (s) (C 38: 5) [14:07:41:053]: created server custom with PID 1724 (0x6BC) Action.

  MSI (s) (38:FC) [14:07:41:178]: running as a service.

  MSI (s) (38:FC) [14:07:41:193]: Hello, I am your server custom action high 64-bit.

  Action 14:07:41: PostInstallScripts. Configuration of SSO components...

  PostInstallScripts: PostInstallScripts

  PostInstallScripts: PostInstallScripts

  CustomAction BootstrapAll returned error code 1603 (note this is perhaps not 100% accurate if translation happened inside the bin to sand)

  Action ended 14:08: InstallFinalize. Return value 3.

  Vminst - Temp.log, I see this, but I don't know if it's relevant:

  VMware Single Sign-on-build-1302472: 25/09/13 14:08 LDAP-Utils: VmSetupMakeLdapsConnection

  VMware Single Sign-on-build-1302472: 25/09/13 14:08 ldap_sslinit attempt...

  VMware Single Sign-on-build-1302472: 25/09/13 14:08 ldap_connect attempt...

  VMware Single Sign-on-build-1302472: 25/09/13 14:08 ldap_bind_s attempt...

  VMware Single Sign-on-build-1302472: 25/09/13 14:08 impossible to establish the LDAPS connection. Error: 1326

  VMware Single Sign-on-build-1302472: 25/09/13 14:08 VmSetupUpdateVmdirCert error: 1603

  VMware Single Sign-on-build-1302472: 25/09/13 14:08 VmSetupVmdirCert error: 1603

  Folder is C:\Users\Administrator.MCI\AppData\Local\Temp\2

  I got vminst - C:\Users\Administrator.MCI\AppData\Local\Temp Temp.log

  Does anyone have any ideas on what I can try, or any other information that might help?

  So I think that I just found out the real reason, it was a failure. In the above-mentioned documentation, they say that; "" "^-are not valid characters in a password. But they missed a character: space. I was using a space character in my password.

  I tried on the setup of a bunch of times. When one of the invalid characters above is used, Setup will continue anyway. And then launching a 1326 in this another log file that I mentioned. Using a space does the same thing. And it's not as if they are not checking the password at all. If you do not meet the complexity requirements in their documentation, then you get this notice:

  

  I don't know why they accept invalid characters in the installation program. And I don't know why they missed listing the space character as a character not valid in their documentation. It is an ASCII character, after all (0x20).

  I tried a few other passwords a long time ago, but I think that was before found this documentation, so I used one of the other characters that are not valid. Or maybe I used another invalid character who is undocumented. If the space is not documented as an invalid character, so who knows how many other invalid characters are?

  And so I say to all those who believe that they have the same problem I did:

  First of all, make sure that it is the same problem. Check that you have found an error code 1326 in the other file vminst.log, located in a directory above %TEMP%. If you can't find a 1326, then you probably have a different problem.

  Then, try other passwords. Do not use the documented invalid characters. And keep in mind that there may be other invalid characters without papers.

  The password doesn't have to be the same as the password for the local Windows administrator account. Just, it cannot contain invalid characters without papers.

• New machine, your plese advice.

  I have read this form for some time and I must say, everyone is very helpful and knowledgeable. It is very impressive. Too bad, I read your articles they are very informative and some went over my head due to my lack of spending more time reading in a post like this that has too many useful solutions. I'll spend more time here to learn and I'm sorry I'm not able to contribute much I try however. I liked your explanation mean since of humor and sense of things. much thanks. I've been using CS4 with matrox RTX2 and now with the release of CS5, I am building a new upgrding rather than machine as I had nothing else that greif for on a unstable machine of the year withvery now. I would have taken your advice I have seen in a post that the car is best used for a door stopbut I have to buy an upgrade to CS5 ebay... what I have so far

  Antec 1200 case with 850 pwer suuply

  P6t MB with I7 930 CPU

  12 GB of DDR 3 Ram

  BFG GTX 285 Nividia card

  Report 300 GB for OS win 7 ultimate 64

  Here's my records that I need some tips with. This is how I set up.

  set up a

  Report 300 GB for OS win 7 ultimate 64

  3 x WD caviar black self 16 500 GB in raid 0 software

  D: I have res TB WD 3 (?)

  E: I have res TB WD 3 (storage, multimedia music etc.

  Set up two

  Report 300 GB for OS win 7 ultimate 64

  D: I have res TB WD 3

  E: I have res TB WD 3

  F: 500 GB

  do not install the other two disks.

  What is the best method and how to use these readers better.

  With the matrox, I got the i/o for external and analog monitor... What do you use, or the advice of what to get. Thank you

  I hope that I was clear because I am confused and help or direction will be greatly apprciated.

  I would opt for configuration 1.

  Use the Raid0 of 3 x 500 for a fixed return for 8 or 12 GB file, cache of media, previews and rendering files.

  Use the D drive for projects and exports and the E drive for your support.

  Take a look at the GV/Canopus ADVC110 or the analog ADVC300 for DV capture and external monitor.

• AE CS4, plugin Keylight, rendering time and specification of the machine

  I do a show which takes 15-20 minutes.  We use a wall of chroma chroma (green) and various images and graphics in the background.  It's a show of several camera.

  The chroma chroma Keylight for AE plugin is amazing. The finished file looked very good, but it really took a lot of time to render.  More than 25 minutes for a test of a minute sequence.  If I had to make it 15-20 minutes, it could take all day.  Is this normal for these long there rendered moments on clips matched with this plugin?

  My machine is an older machine.  Win XP SP3, HP/compaq dc7600, Duo core, both 3.4 GHz, 3 GB of RAM.  If I had to update this machine, which would be optimal for the shortest rendering time?

  I found a quantity of decent info on how to use the plugin, but not big thing on recommended card machine or times normal.  Where can I find more information on the card of what machine are needed to take full advantage of tools and plugins of EI?

  Thank you

  Anthony Roberts

  JournalStar.com

  MMH, Yes, it's still ambiguous to advise on the matter. For your business a Core2Duo should be just fine. Just make sure it is later a (8600 E currently). I wouldn't bother with a Core2Quad in your situation - if there is no hope of improvement, what be soon, it's a bit pointless to invest in a more expensive processor and motherboard. Given the fast-paced development cycles, you buy a computer for the next 2 or 3 years and already in a few months to not consider any worthy material updates. At best, so I'd go for a new AMD Phenom II X 4 because it's much cheaper while offering better performance (current quads of intel are a little behind). Yet, would be exaggerated, especially if we consider that "crunchy" all can be more important for you, to get fast feedback while you work more predictable rendering times. The performance by heart is less about quad systems, they burn only if you use the hearts of all time, that your proposed combination would not. AE and many plug-ins don't are not especially optimized in terms of multithreading and if you use the option to make several images at the same time would compensate, is another matter. Definitely get these 8 GB of RAM and Vista 64 Business or Ultimate, so you can max on the memory of EI usage and are on the right side, when future versions are going to 64-bit. For the graphics card, settle on a GeForce normal 275 / 285, not a multi-GPU as 295 card. With regard to the suggestions of the brand - Dell and HP are trustworthy, but not the cheapest. I could recommend other brands are specific to the Germany / Europe, so he can't help you. also, if you know a good computer guy, think about him having to build a custom machine. This will shave a little money here and there, because you can order the individual components of those who sell at the lowest price. I went like that with my Core7i and was thus able to save almost 500 Euros compared to these sellers of stock...

  Mylenium

• HP Pav 23-q105na AiO: perform a clean install on new machine

  Hello

  I would like to do a clean install on a new machine of all-in-one HP I have and would like to know about activation of a couple things.

  The machine comes through OEM Activation 3.0 (OA3) or by Product Activation Windows (WPA). The reason why I would like to know this, is that once the own installation took place, automatically Windows know that the machine has a license valid Windows 10 and will be so it turned on once he gets online?

  Please note that when I got the machine, I let it install the version of Windows 10 comes with the machine, and made sure it has been activated. (recorded with the MS servers)

  I will also be wiping the part of the resumption of training as well during this process.

  Kind regards

  Richard

  Hi TheOldMan,

  I have now completed the clean install on the machine and it activated fine. I had media via Windows Media creation tool.

  He activated properly, so now just re - installs all the necessary drivers / programs again. I have another machine I boaught at the same time, so now do the same for this one. I used ShowKeyPlus to check and verify my key before starting.

  Thanks for the reply but.

• Can I migrate vista windows of a dead to a new machine?

  Recently, the hard disk went on a laptop I bought in 2007.  I had been running Windows Vista.

  To replace it, I'm Mid-building a new PC, and I'm price of BONES.  Like almost everyone, I would like to avoid paying the full cost for windows 7.  So, while it may be a long shot, my question is this: is it possible to switch the license for Vista my old machine, death has a brand new (for the purposes of backup and just get the W7 upgrade)?
  Sorry if this is silly and my thanks!

  If your copy of Vista comes with the laptop, then no, you cannot migrate to another computer.  Windows OEM copies are related to the motherboard of the computer, they are provided with and may not be used on another.  If you bought a copy of Vista retail, then you can transfer.

  If you create a custom computer, you will need to purchase a copy of the full license of Windows for that.  Do not buy an OEM System Builder copy from a retailer like Amazon or NewEgg.  OEM SB packs are for custom builders, selling computers to customers.  A person who built his own computer is not a builder of sytem as defined by the Microsoft license program.  Such a person is a do-it-yourselfer.  The correct license is retail.

  Don't buy Windows 7 on a discounter in line, the Amazon Marketplace or eBay.  The internet is full of counterfeits produced in China.  They are very good imitations, as you can see in this video:

  http://www.YouTube.com/watch?v=hzqNNiOM0cs

• Use the motherboard is dead. W7P is usable on my new machine?

  Several years ago I bought a kit online authentic get of MS as I apparently had an initially pirated copy. Everything is fine for 3-4 years, then my machine died. I get a new office which has W7 Home Premium installed. Can I install my W7P on this new machine in order to make the WP7, I've been using and paid? I do things... Thanks in advance.

  As long as what you bought is a "Commercial" and not an OEM of Windows 7 version, Yes, you can install and activate on your new PC.  However given that the product key has already been activated on your older PC, this time you will need to activate by phone.

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048
  (888) 725-1047 or 800-936-5700

  -Product key of letters and numbers-

  Not confused the letter B with the number 8, the letter Q with the letter O.
  the letter G and the number 6.

  A, E, I, O and u are not used.

  ----------------------------  Alternatives -------------------------------------

  To enable the use of the phone

  1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
  then by clicking on activate Windows now. ?

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated telephone and then click Next.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

  7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

  8 Note the confirmation ID the phone system gives you.

  9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

  10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

  How to contact a Microsoft Product Activation Center by phone
  http://support.Microsoft.com/kb/950929

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Register Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/help/register
  Register Windows 7 and you automatically receive a series of three welcome to Windows e-mails
  filled with tips, creative tips and other information to you help get the most out of Windows 7.
  You also get a subscription to the monthly newsletter of Windows Explorer,
  where you will find other tips and tricks, as well as special offers.

  Learn about Activation:
  http://TechNet.Microsoft.com/en-us/library/ff793423.aspx

  J W Stuart: http://www.pagestart.com

• So im basically building a new computer from hole from zero cd witch I would put first?

  IM building a new computer from hole from scratch the mother aboard for the dvd player and so I was woundering instalation cd witch should I put first the mother boards or the DVD isalation cd iv also got a cd of video card, but I thought it would be com after those...

  because I'm not sure who would first come the first time a fabricated construction...

  First, install Windows...

  Put in the CD of the motherboard and load all the drivers for the card...

  Then do ALL the updates of Windows with the exception of HARDWARE drivers...  Do NOT install hardware through Windows Update drivers...

  Then install your antivirus protection...

  Then go to the video card manufacturer's website and pick up the latest video drivers

• Acrobat Standard 2007 license. New machine. Failed to install. Have the serial number.

  Realize that this sounds weird. I got a copy of Acrobat work since 2007. Saved the downloaded software all the time. I have a new machine and you want to reinstall. Is this possible?

  strictly speaking, you can install version 7. But since it cannot be activated this is of no use in practice. In any case would not work on modern systems.