Item number of update

Similar Questions

• Number of updates of Windows XP Pro, from 2005 to 2010.

  Good afternoon

  Could I please get the number of updates for Windows XP PRO from 2005 to 2010.

  I work in the Navy as an IAM and trying to collect data for a report.

  The number of updates for XP Pro can be determined by visiting each of these KB articles, they are looking for updates XP , and then goes to each item listed to see which ones who wereintended for XP Pro only :

  Description of changes to Software Update Services and Windows Server Update Services content for 2005

  Description of changes to Software Update Services and Windows Server Update Services content for 2006

  Description of changes to Software Update Services and Windows Server Update Services content for 2007

  Description of changes to Software Update Services and Windows Server Update Services content for 2008

  Description of changes to Software Update Services and Windows Server Update Services content for 2009

  Description of changes to Software Update Services and Windows Server Update Services content for 2010

  MowGreen Services update - consumer safety

• An extreme number of updates before closing

  Whenever I click on the Start button, there is a small yellow shield with an exclamation point in the Center (!). He said that I have updates installed, so far, nothing serious happened. It's just that it takes a long time to stop with the updates. It happened about 4 times already ranging from 5 to 26 updates. I think that this is not normal. Why are there so many updates installed? The test, I immediately shut down the computer and let it install updates day and then after that, I turned it on and waited, of course, there are more updates to install. I don't know if it's a sort of bug of virus but I know no more and faster it is resolved, I'll feel the better.

  Windows wants to install updates at shutdown - this happens when the automatic updates downloaded updates, but not all updates you have requested or for automatic download.

  I would say after reading your post, that of the updates fail to install and this is why there are so many every time you stop, they repeat.

  You do not have to provide information such as what operating system you use, so I'll just post a general answer.

  Check the Windows update log to see if there are error codes that indicate that updates are not installed etc.

  How to view the log of update Windows: -.
  
  Click Start and then click Run.
  In the Open box, type: %windir%\windowsupdate.log
  and then click OK.

  Scroll down to the last entries find the error codes associated with the last attempt to download/install. If the appropriate copy and paste the codes of errors in this thread if someone may be able to help you. On the other hand, you can find the error code and other suggestions in the discussion group.

  Also check the Windows file called Ko folder * .log (* = number of update KB896688 ie) and send the contents of the update has failed.
  This may even provide clues as to why the update failed.

  How to read the Windowsupdate.log file:
  http://support.Microsoft.com/kb/902093

  For Vista also check any warnings or critical Message:

  Right click on computer

  Select: Manage > event viewer > application logs and services > Microsoft > Windows > WindowsUpdateClient > operational

  TaurArian [MVP] 2005-2010 - Update Services

• How to count the number of updates in a loop Forall

  Hi friends

  I want to know is - it possible to count the number of updates occurred in FORALL. I share the codes below. His only return the iteration number. If I spend 5 through the values of the PARAMETERS and 2 updates the values in the table then return 5 instead of 2.  My requirement is to count the number of updates have taken place and return this value to OUTPUT parameter. If possible, please share codes. Thank you very much...

  CREATE OR REPLACE PROCEDURE UPDATE_PROCESS_RATE 
            (
             V_HOSPITAL_ID IN HOSPITAL_SERVICE_MASTER.HOSPITAL_ID%TYPE,
             V_USER IN VARCHAR2,
             V_DATE IN DATE,
             V_PROCESS_ID  IN VARR_ARRAY,
             V_PROCESS_RATE IN NUM_ARRAY,
             V_NUM OUT NUMBER
             )
  
  
              IS
  
                  V_ERROR_CODE NUMBER(15);
                  V_ERROR_MSG VARCHAR2(200);
                  V_ARRAY_ID NUMBER(10,2);
                  V_TOTAL NUMBER:=0;                                            
     BEGIN
                SAVEPOINT Sp1;
           BEGIN
     
                 FORALL i IN V_PROCESS_RATE.FIRST..V_PROCESS_RATE.LAST
               
                             UPDATE HOSPITAL_SUBSERVICE_PROCESS M 
                             SET M.PROCESS_CHARGE=V_PROCESS_RATE(i)
                             WHERE M.HOSPITAL_ID=V_HOSPITAL_ID
                             AND M.HOSPITAL_PROCESS_ID =V_PROCESS_ID(i);
                                                      
                 FOR i IN V_PROCESS_RATE.FIRST..V_PROCESS_RATE.LAST LOOP
              
                     V_TOTAL:=V_TOTAL + SQL%BULK_ROWCOUNT(i);
                 End loop;
             
                     COMMIT;  
                     V_NUM:=V_TOTAL;           
  
  
  
  
  

  IndiMinds wrote:

  But my requirement is: it must count the update only when it detects a different value from array. When it detects a different value in the table must be updated and count it and if the update of the table value is similar the TI should not count it.

  For example, if the V_PROCESS_RATE table have these 3 values (10,20,30) and we need to update these 3 values with (10,40,50), so no update, it should return is 2 not 3.

  Thank you

  And then don't update these lines, change your update statement

  UPDATE HOSPITAL_SUBSERVICE_PROCESS M
  SET M.PROCESS_CHARGE=V_PROCESS_RATE(i)
  WHERE M.HOSPITAL_ID=V_HOSPITAL_ID
  AND M.HOSPITAL_PROCESS_ID =V_PROCESS_ID(i)
  AND DECODE(M.PROCESS_CHARGE,V_PROCESS_RATE(i),0,1) = 1;
  

• How to count the number of updates in a loop?

  Hello world

  Warm greetings

  I'm using Oracle 11 g. I want to count the number of updates inside a loop. If updating not only one value in the table, then it should return 0 otherwise, it should count the number of updates and return it. I used SQL % ROWCOUNT, but returning an incorrect value.

  I share the sample codes.

  procedure proc1 (vid IN Number, vprocessId IN varr_varray, vCharge IN vnum_varray,vcnt OUT)
  IS
  vFlag Number(3):=0;
  Begin
  
  
  vflag:=vprocessId.FIRST;
  If vflag is not null then
  For vprocessId.FIRST..vprocessId.LAST
  Loop
  Update table set colCharge=vCharge(i)
  where colId=vid
  and  colProcessId= vprocessId(i);
  
  
  
  
  End Loop
  End;
  

  Please close the question if it has been answered.

• How can I get the serial number for update for first pro cs4 4.2.1, one provided with the product does not work.

  How can I get the serial number for update for first pro cs4 4.2.1, one provided with the product does not work?

  You don't need a serial nr for updating a program

  You need the original CS4.0. install and add the series nr. to get the program to work.

  Now you can update to 4.2.1

• Install the CS6 on the new PC with serial number for update

  I installed CS6 Design Standard on PC new with serial number for update (after deactivation on old). The serial number is valid but no product eligible on the PC. I don't find it in the list. Do I need to install the previous version?

  Please see:

  https://helpx.Adobe.com/Creative-Suite/KB/error-serial-number-qualifying-product.html

  I hope this helps.

  Concerning

  Megha Rawat

• OSP item number

  Hi all

  What is the OSP item number?

  Which table we retrieve the column.

  Thank you

  Hello

  Suite SQL will provide you with items in the BCP.

  Thank you

  PS.

  SELECT

  *

  Of

  mtl_system_items_b

  WHERE

  outside_operation_flag = 'Y '.

• Number of update in a procedure

  Hello people,
  
  I have a problem, I have created an ODI procedure.
  
  In the first step generates a file through the tool of ODISQLUNLOAD... Ok
  
  In the second step, I do an update in an Oracle table
  
  
  Here's the problem, I would like to the third step, I retrieve the number of rows that have been updated, it is possible?
  
  Bovolini

  By default, when Oracle executes an update statement the return value is the number of updates. In a step of procedure ODI, this value will then be put in the field that you select in the drop-down menu for number of inserts/updates / deletes / errors. You should not have to fetch the value, the data is giving you and ODI which will automatically put in your column.

• Need help for error number OxC00042D, updated from microsoft.

  I was able to get the updates on the site to update for a few months and we tried the Mr. Fixit several times with no success. I kept getting the error number OxC00042D. I have XP with service pack 3. Any suggestion would be great.

  Phillip,

  Check again this error number.

  UTC/GMT is 03:51 Wednesday, September 19, 2012

• Cannot install Windows Update error number 80070641 update

  original title: little Question on the error 80070641 update number

  Hi, I was wondering if someone help cam - I had a windows update to install the-(KB2596785) next, (KB2596843), (KB2596912), (KB2596789) all for microsoft office (2007) and powerpoint, say is there important updates, I looked at things on the net read something where you need to restart RPC or something I am tired still did not work , then I get in this tired tired form and no command prompt and he came back with "specified service does not exist as an installed service" so I came out and I tired deleting cookies ect to see if it worked yet doesn't. He gets to the green as his will happen at the end, then says error windows updates (4) 80070641, tried Microsoft 'DIFFICULTY IT' he says he did also, I retired and he never, so im abit lost on what I could do. I'm not very irritable only do basic stuff. I look forward to your help much appericated

  IM on windows vista home prem, Service pack 2

  HI BlackSparkle,

  System Restore will probably not solve the problem at this stage. Unfortunately, you will need to get their hands on your system manufacturer and ask for a replacement disc from them.

• Library items do not update on compositions?

  I just installed after effects CC 2015 and I was really left with the new library feature...

  Now, I hope to deceive, but there is no local library? I mean, I have to be connected to the internet to send my files on the internet and then download the same file to my computer to use? What?
  And another question once I put a library item into a composition and I update the element in Photoshop, the library updates but composition not... which is another what?
  
  I works with study of movement of the user interface for Mobile and all customers of time alters elements in design, re import and re position that elements has always been very time-consuming. There's another workflow that someone knows who uses a behavior similar to this new feature of library?

  Thanks a lot for your time!

  Now, I hope to deceive, but there is no local library? I mean, I have to be connected to the internet to send my files on the internet and then download the same file to my computer to use? What?

  Assets of libraries are managed locally on your computer before you synchronize with your creative cloud account. You don't need to be connected to the Internet to sync a library between Photoshop, Illustrator, After Effects, and other creative applications Cloud. Once you're connected to the Internet, local changes will be loaded.

  (The service that handles this is called CCLibrary, you can see running in Activity Monitor on Mac OS or Windows Task Manager when after effects CC 2015 is open.)

  And another question once I put a library item into a composition and I update the element in Photoshop, the library updates but composition not... which is another what?

  After effects CC 2015, active library you import your project becomes separated from the assets in the library. If a change is made to an asset library you use, you will need to re - import updated assets and replace the use of the original asset in your publication (e.g., use the Option/Alt + drag to the target layer in the composition). We are working on assets related to a future version of After Effects.

  The creative team Cloud libraries continues to evolve the features of libraries. If you have specific requests, do not hesitate to let us know: http://adobe.ly/feature_request

• Items 13.1 update problem

  I can't update of items to 13.1. I got the U44M1I210 error code. What should I do?

  Please try to create another Admin user and then by installing the update from this account.

  Thank you

  Blandine

• Insert the type of number by updating the database.

  Hello
  
  I have what seems like a simple problem, but I don't know how to solve it. I have a page that the user creates accounts for new users in the database. When the account is created, it updates the Users table in the database, and then also the Users_In_Roles table that assigns each user a role using the user ID and the ID for the role they are assigned to. In my app module method, I have an if statement that checks to see if the current connected user's role ID 1 or 2 using the ExternalContext.isUserInRole () method. If the logged in user is 1, the created user account is automatically set to 2, and if the user is 2, the created account is automatically set to 3, in other words, the new user is defined at the level of a role under user to create.
  
  Here's my problem. In the case statement that checks the role of the logged in user, I put a variable number of role roleID I want the new user to be, but when I try to get this number in the Users_In_Roles table, I get an error since the roleID column is a data type of number, I can't pass a variable of integer type in this column. I tried declaring the variable roleID to type the number, but then I can't set it to 2 or 3 in the case stated that it will not accept integers. Anyone know how I can configure the roleID to correct 'number' variable so that I can spend at the table?
  
  Thanks in advance.

  Use the constructor Number (int i). in other words, instead of setting the attribute

  yourIntValue

  Set the attribute to

  new Number (yourIntValue)

• Fan number after updating to Mac OS Sierra

  Hello people, as many of you all know, Apple released macOS Sierra. The updating of this new operating system, I have been met through rather annoying problem for me. It seems that my fan is not eager to be quiet as it has been in the previous operating system. The computer is usually warmer than its normal temperature. At first I thought it was a software problem during the upgrade. I came back to El Capitan, the computer runs cool. Fresh installed copay of Sierra and the computer becomes extremely hot and fan running constantly at high SPEED. It's quite strange to me, so I was wondering if someone else running Sierra also have this problem. I have little friends of mine Sierra both running on their MacBook Air machines, but they have the same problem. Any help or suggestion? Thank you

  Hi SC909,

  It seems that your computer is running more hot than usual, and as such, the fan is at the top all the time. I would say that resetting the SMC on your computer:

  Reset the management system (SCM) controller on your Mac.

  Thank you for using communities of Apple Support.