Need help for error number OxC00042D, updated from microsoft.

Similar Questions

• Need help for error 1719 Windows Installer Service could not be accessed. Your personal contact to check who is properly registered and checked?

  I bought a new Netgear Dual Band Wireless USB adapter N - 900 and I can't get the thing to install because the error 1719 Windows Installer Service could not be accessed.  Contact your personal assistance to check that it is properly registered and activated.  Can someone out there help me understand what I need to do?  I am completely lost and have been for three days.  Please help me!

  Hello

  1. are you able to install other programs?

  2 have you made any changes to the computer before the show?

  Method 1: Run the fix - it in the following article: fix problems with programs that cannot be installed or uninstalled:

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

  Method 2: Start the Windows Installer service

  See the following steps:

  a. click Start, type Services.msc and press {ENTER}
  b. double-click Windows Installer
  c. set the startup type of Windows Installer to automatic
  d. Click Start to start the service. Note the error message, if any.
  e. click OK.

  Method 3: Unsubscribe and re - register the Windows Setup program.

  See the following steps:

  a. Click Start, click Run, type MSIEXEC /Unregister. and then click OK.

  Note: Even if you do it right, it may seem that nothing is happening.

  b. Click Start, click Run, type MSIEXEC/REGSERVER and then click OK.

  Note: After you run this command, the operation is complete.

  c. try your application based on Windows Installer again.

  Method 4: SFC scanner.

  Analysis (sfc) System File Checker will replace the missing or corrupted system files on your computer.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929833

• I need help for error #800070645 code please.

  When I install updates to the framework of microsoft automatic updates will not install help

  Microsoft .NET Framework 3.5 Family Update (KB959209) x 86

  they are not installed:
  family update Microsoft.net 3.5
  Security for microsoft 1.1SP1 framework update
  for framework 3.5 SP1 microsoft security update
  framework 4 microsoft security update
  I'm running Vista Home premium please help me

  Follow the steps in this article: http://support.microsoft.com/kb/KB976982

• I NEED HELP FOR ERROR SYSTEM 70190610 PLEASE!

  I ASKED MY DAUGHTER TO SET UP A PASSWORD FOR ME, AND NOW I CAN'T ENTER NEW

  HE ME GIVES A 701906 ERROR CODE, THEN IT CRASHES PLEASE HELP THANKS!

  DIANA C.

  Hi Diana,

  Try to enter: 65898236

  Kind regards

  DP - K

• Need help for error on N3024 after the easy Setup Wizard

  I feel that I am a rookie mistake, but I can't figure out what I did wrong.  Any thoughts on how to solve this conflict IP error?

  Thanks, Matt

  

  Make sure that the OOB is connected to a management network that is isolated from the network in the Strip.  They should not go in the same network.

• Achtung Nerdlings, need help for error 1061

  Hello

  I can't understand why I get the following error:

  1061: call to a getAdReturn method maybe not defined through a reference with static type class
  Any suggestions?
  I've highlighted the line on which I get the error:

  Import flash.net.navigateToURL;

  Import com.joeblow.ads.Ad;

  import of com joeblow.ads.OpenAds;

  private var _adReturn:Ad;

  private function initAd():void {}

  _adReturn = OpenAds.getAdReturn ();

  adImage.source = _adReturn.mediaSource;

  adImage.buttonMode = true;

  adImage.addEventListener (MouseEvent.CLICK, sendToURL);

  }

  The class is as follows:

  package com.joeblow.ads

  {

  Import flash.external.ExternalInterface;

  import mx.controls.Alert;

  public class {OpenAds

  private public static var externalCallback:String = "callOpenAds";

  private static var attempts: uint = 10;

  public function OpenAds() {}

  }

  public function getAdReturn (): {Ad

  var xmlReturn:XML;

  { If(ExternalInterface.available)

  var adReturn:String = ExternalInterface.call("saveglobalscore",score) (externalCallback);

  try

  {

  adReturn = adReturn.replace ("[/ /]] >--> ',' [/ /]] >--> \n ');

  var infoTagsIndex:int = adReturn.indexOf (' < script type = "text/javascript" src = ""', 0);

  adReturn = adReturn.substring (infoTagsIndex, adReturn.length);

  var wasFlash:Boolean = false;

  If(adReturn.search ("< embed ') ==-1) {}

  adReturn = adReturn.replace (' > < / a > ', ' > < / img > < /a > ');

  adReturn = adReturn.replace (' > < / div > ', ' > < / img > < / div > ');

  }

  else {

  adReturn = adReturn.replace (' > < / div > \n < script',' > < / embed > < / div > \n < script');

  adReturn = adReturn.replace (' > < / div > \n < noscript',' > < / img > < / div > \n < noscript');

  wasFlash = true;

  }

  adReturn = '< adXMLReturn >' + adReturn + ' < / adXMLReturn > ';

  xmlReturn = new XML (adReturn);

  var ad: Ad;

  { If(wasFlash)

  ad = new Ad (xmlReturn, true);

  }

  else {

  ad = new Ad (xmlReturn);

  }

  }

  {} catch(error: error)

  Alert.show (error.message + ' stacktrace:' + error.getStackTrace (), "Error");

  }

  }

  else {

  Alert.show ("Javascript must be enabled to view this page properly.") , 'Javascript not detected');

  xmlReturn = new XML (' xml < root > < / root > ');

  }

  return ad;

  }

  }

  }

  If you can help me, I would really appreciate it!

  Thank you

  -Laxmidi

  When you call a method with the name of the class, it must be a method static, also known under the name of a method "class":

  Public Shared function getAdReturn (): Ad {}

  If you don't want the static method, create an instance of the class and call the method:

  var myOA:OpenAds = new OpenAds();

  _adReturn = myOA.getAdReturn ();

  If this post answers your question or assistance, please mark it as such.

  Greg Lafrance
  www.ChikaraDev.com

  Support and Flex development services

• Need help for the release of results from a query involving the Group of

  I'm working on a time-tracking application. I have a job that contains the following items: Department, System time_spent. I want that my report to display the total number of hours spent for each Department and each Department, I want to show the total hours devoted to each system.
  For example:
  
  40 hours of accounting
  System 1 20.0
  System 2 20.0
  
  I wrote the following query:
  < cfquery name = "getTotalHours" datasource = "mpdb2" >
  SELECT deptid, system_id, sum (time_spent) as TotalHours
  Tasks
  GROUP BY deptid, system_id
  < / cfquery >
  
  Here is my result:
  < cfoutput query is 'getTotalHours' group is "deptid" >
  < h2 > #deptid # < / h2 >
  < cfoutput group = "system_id" >
  < ul >
  < li > #system_id # #TotalHours # < /li >
  < /ul >
  < / cfoutput >
  < / cfoutput >
  
  Here's my question: how to accumulate the hours for each Department? I want to display the total number of hours for each Department in the < h2 > tag with the name of the service.

  Something like that, I usually total it myself on the fly:

• Need help for error TNS

  Hello
  
  I installed oracle 10.2.0.1 on windows server 2003. When I'm trying to connect to this database using Toad or sql more than any other machine, I get the error: ORA-12203: TNS: unable to connect to the Destination. The database name is "ORCL". The listener is running on the server. I ping the server.
  
  
  The listener parameters are as following on the server:
  
  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = PLSExtProc)
  (ORACLE_HOME = E:\oracle\product\10.2.0\db_1)
  (= Extproc PROGRAM)
  )
  )
  
  
  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1))
  (ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.25.16)(PORT = 1521))
  )
  )
  
  
  The SQL NET parameters are as follows:
  
  SQLNET. AUTHENTICATION_SERVICES = (NTS)
  
  NAMES. DIRECTORY_PATH = (TNSNAMES, EZCONNECT)
  
  
  
  The TNS customer is as follows:
  
  mdstdby. World =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS =
  (COMMUNITY = tcp.world)
  (PROTOCOL = TCP)
  (Host = 192.168.25.16)
  (Port = 1521)
  )
  (ADDRESS =
  (COMMUNITY = tcp.world)
  (PROTOCOL = TCP)
  (Host = 192.168.25.16)
  (Port = 1526)
  )
  )
  (CONNECT_DATA = (SID = ORCL)
  )
  )

  change (Port = 1526) 1521 and try to connect

  Add the entry in the file tnsnames.ora on the client and the server

  ORCL =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST =192.168.25.16 )(PORT = 1521))
      (CONNECT_DATA =
        (SERVER = DEDICATED)
        (SERVICE_NAME = orcl)
      )
    )
  
  EXTPROC_CONNECTION_DATA =
    (DESCRIPTION =
      (ADDRESS_LIST =
        (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
      )
      (CONNECT_DATA =
        (SID = PLSExtProc)
        (PRESENTATION = RO)
      )
    )
  

  Published by: rajeysh on May 15, 2011 15:02

• Need help for optical safety circuit.

  I buy these parts and prototype with real components, but since I multisim, I thought it would be nice to create the circuit and maybe work through issues I can practically.

  I need a circuit that takes 120 VCA, generates 5 VDC and 1.5Vdc power of optical transmitter and receiver.  I actually use a data port because he has great range and is pretty cheap.  Rather than send the binary code well I just send a light stead that is broken or not broken through doors and windows in my house.  Then the receiver sees this as an entry and order a relay.

  I tried several voltage regulators that come with multisim, but I get an error of execution of my circuit.  Really I can't the 120 VAC to power levels necessary for the functioning of the optics.

  Otherwise I might want to run on a system 120Vdc with battery backup, so throw a 120Vdc up to 20 v DC switching power supply - but I have not found a SMP in the library which takes 120 as input and as output 20.

  Basic plan: 120VAC source-> transform to 24Vac-> Full bridge rectifier to ~ 20 v DC-> voltage capacitor filter on the input of two voltage regulators (1 to 5 VDC, 1 to 1.5Vdc) - then circuit since the two power supply of the transmitter and the receiver.

  I just need help for 5V and 1.5V, from there, I know that the real world circuit will work component tests already carried out.  Thanks for reading.

  I didn't Multism so I can't advise you on the compatible models. I ran the model on semiconductors with slight modifications of format on my SPICE simulator based on Berkeley Spice 3f5. I had to change the format of model resistance semiconductors appeal but has not changed any values.

  The output of your power supply circuit 3 (with 5 V, not the 1.5 V regulator regulator) was 4.99995 V.

  There are a few messages about changing templates published for compatibility Multisim woth. You can search those to see if there are any suggestions on what you'll need to fix in the model.

  Lynn

• I just bought a key code to update from microsoft for windows xp. When I enter the code is says I have an invalid code? can someone help me?

  I JUST BOUGHT a key code to update from microsoft for windows xp. When I enter the code is says I have an invalid code? can someone help me?

  Hello

  1. what exactly are you referring?
  2. Enter the code to upgrade the main code of the Office application or operating system?

  Follow the steps in this article.

  You receive an error message after you enter the product key when you try to install Windows XP
  http://support.Microsoft.com/kb/310637

• Flow 8: Need help for upgrade of windows 10 8 Stream

  I'm trying to upgrade my 8.1 Stream 8 Win to win 10 to aid Assistive technology update from MicroSoft on this page

  https://www.microsoft.com/en-us/accessibility/windows10upgrade?tduid=(14c348e893a91089cb2980533c6ee1...) ()

  I started by updating Win8.1 completely so that there is nothing on the Tablet and then downloaded the Upgrade Wizard of Windows 10. When I started running he says he he had enough memory, but it stopped at 95% and said: he is there not enough of free space. I let him try freeing up a space, but he could not find anything.

  I found a few threads on the forum about this, but they all were too complicated for me or a different installer that had buttons that is not in question.

  I'm not experienced with this sort of thing, so I need very simple instructions. Can someone help me with this?

  BTW: I have empty drives USB 8 GB and 4 GB and a notebook NC6400 with Win10 that I can use during this operation, if that helps.

  The second line in your original post mentions 64 bit where my concern. Yes you correctly found that the stream 8 has a 32-bit version of Windows and and x 64 compatible processor. Due to the needs of additional memory to a 64 bit OS, I don't think even to try to install a 64-bit version of (even if it were possible). If Windows 8.1 32 bit is upgraded by using the normal upgrade process then yes it'll upgrade automatically to 32 correct but the version of Windows 10 Home. Multimedia authoring tool will allow you to choose which version you download however (as the machine that allows you to download the Windows version may not be the device that you want to upgrade) that is why it is important that you get the 32-bit version only.

  If the instructions you found on the upgrade via a USB stick with Windows good, 10 build are difficult for you to understand so yes, I suggest you use the line of Support technique Microsoft and get some "hold your hand" during the process. As to how you connect the USB to the Tablet I'm not sure what you mean by an adapter "regularly." If it has good caps at each end to connect your USB to the Tablet, then it should work. I used a 4 port powered USB 2.0 Hub when I did my upgrade etc because it allows me to keep the Tablet powered / load all by allowing multiple devices to plug - do not just the memory stick, but also a combination of mouse and a USB keyboard. I posted the details of the cheap and simple hub I bought for this purpose elsewhere on this forum. HTH

• Update from Microsoft. Error code: 0x80246008__

  I get an error message when you try to do an update from Microsoft. Error code: 0 x 80246008
  I use XP Pro SP3 32-bit. It may be related to a security McAffee which has been downloaded without knowing when the update of Adobe Reader. I uninstalled McAffee software but still get the error message for 101 priority updates installing.

  Hi Deb on Foodsmiths.

  1. do you have 101 updates important to install on the computer?

  2. did you of recent changes on the computer?

  See Microsoft articles below and try the steps mentioned, check if it helps.

  You may receive an error message that contains the "0x8DDD0018" code or the code '0 x 80246008' when you try to download the updates on the Microsoft Windows Update Web site or the Microsoft Update Web site

  http://support.Microsoft.com/kb/910337

  You receive an error message when you try to download the updates on the Windows Update Web site or the Microsoft Update Web site, or when you try to start the Background Intelligent Transfer Service

  http://support.Microsoft.com/kb/916251

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Need help with error code "WindowsUpdate_00000646".

  can anyone help?

  http://www.Microsoft.com/downloads/en/default.aspx

  Put the KB numbers in the search at the above link > download them manually.

  If this does not solve it:

  Windows Update Forum:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Since the last automatic update from Microsoft, I get the message on Outlook & Excel I need to activate the product.

  Since the last automatic update from Microsoft, I get the message on Outlook & Excel I need to activate the product. When I try to activate I tells me it is already activated, they have been running fine since 2001 when the Office Proffesional was legally purchased.
  The pop-up with activation message has two buttons, "Remind me later" and the button "more..." which seems to send me around in circles when it is followed.

  Hi Dudlion,

  Thanks for visiting the site of the community of Microsoft Windows XP. The question you have posted is related to Office and would be better suited to the office community. Please visit the link below to find a community that will provide the support you want.

  http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I need help fixing error 340... only, I get this message when I try to send an email... there at - there a way to fix this error free?

  I need help fixing error 340... only, I get this message when I try to send an email... is possible to fix this for free?

  You must ask Yahoo.
   
  Yahoo support
  http://help.Yahoo.com/l/us/Yahoo/helpcentral/