Its appeal is too strong and not adjustable

So I have a problem lately during the call to friends directly from Skype to Skype (no group call). The problem is that if you have not already guessed that the sound I get from my friend is much too strong as if Skype automatically on the volume up to max. However, it would not be a problem if I could adjust the volume in the speaker settings. I freely use the cursor in the different options, but the volume does not change. This problem happens only in "private" calls, so the problem is not present in the Group calls. I've attached a screenshot of my settings of the speakers during the call (my friend spoke to the moment I took the screenshot) and as you can see there is no green bar that indicates that he speaks. This problem sometimes used to disappear, if I stopped the call and started it again, but unfortunately is no longer the case. Thanks in advance for any help.

I use the latest version of Skype (7.18.0.109 for the moment)

My helmet is the Sennheiser PC 323D G4ME (the problem is also present on other helmets so it's probably not my problem)

May be the same as in this case.

http://community.Skype.com/T5/Windows-desktop-client/Windows-10-audio-settings-speaker-volume-slider...

Tags: Skype

Similar Questions

  • How can I get my menu bar on my macbook pro? The dock also disappeared. I know I have to take my pointer upwards (or downwards), but it's a waste of time and that bothers me. Its only happens on Safari, and not on other applications.

    How can I get my menu bar on my macbook pro? The dock also disappeared. I know I have to take my pointer upwards (or downwards), but it's a waste of time and that bothers me. Its only happens on Safari, and not on other applications.

    You could try starting in safe mode:

    • Try safe mode if your Mac does not end commissioning - Apple Support

    Which can allow additional troubleshooting.

    Also, sometimes there may be a hardware problem which may help a SMC reset with

    Depending on the cause:

    • Reset the management system (SCM) controller on your Mac - Apple Support

    You can try the test equipment to see what appears in the results:

    • With the help of Apple Hardware Test - Apple Support

    Other options include an appointment with a genius of Apple Store or a

    service provider authorized Apple for the device inspected, diagnostic tests, etc.

    There may be system software or hardware problems, in order to solve the problems with the aim

    to see what the cause, can take time. If you have a backup in Time Machine &

    end by using OS X Recovery to see OS X Utilities usage, disk utility or

    other functions, be aware that this can make the more advanced features; It may not need.

    Because this question appears as a symptom in Safari, which makes it more curious.

    • Stop the pop-up ads and advertising on Safari - Apple Support

    http://etrecheck.com/ http://www.adwaremedic.com/index.php   

    There may be a weird extension in Safari that may relate to some adware or other

    elements, so this is another issue to consider. a report of Etrecheck may tell you if

    some candidates are there; but maybe not. I do not primarily use Safari

    so, my other two browsers work slightly differently.

    Good luck & happy computing!

  • Cannot change rules in Mail because the window is too short and not resizable

    When I create or edit a rule in the mail, the window is always too short, and it cuts the Actions section. I had this problem for a while, but there is a small bit visible (the wick down the line) and I could click to edit it, but now there's nothing I can click at all, that keeps me completely from the use of the rule. How can I fix or work around this problem?

    In the past, restarting Mail would bring this window to its full size. If this does not work for you, try this:

    Exit the Mail.

    In the Finder, select go, then navigate to the folder. Copy and paste the path below and click GO:

    ~/Library/containers/com. Apple.mail

    Move the entire folder com.apple.mail to the Recycle Bin, open Mail and test. If all goes well, you can empty the trash. You may need to re create your user settings.

    Some have said it works, and others say that it worked temporarily.

  • How can I get pages to fill my new LCD monitor? some do, some still too square and not as a landscape.

    monitor is completely filled with some screens and not on others, similar to differences in format on widescreen TVs. Why and which attaches?

    == new monitor, I just CRT LCD

    Hello Gary.

    Unfortunately, there is no solution to this problem, because it is down to how each Web site is designed. Some sites Web stretches to fit the width of your Firefox window and it's as well as some do web work, as of today.

    You can not run Firefox in a maximized window, for this reason. That's how a lot of people with big screen choose Browse.

    Or, if you know CSS, you can install Stylish and write a style for the pages you want stretched. But that's only if you know CSS, or if you want to spend a few hours learning.

    I hope that answers your question.

  • Picture of the desktop too close and not clear.

    I tried to change my desktop picture, but when I chose the option full screen, the image was obviously unclear and too big because it shows the places throughout the image.  Don't know what we call these squares.  Away from the computer, the image is perfect.

    These squares are called "pixels".  The old CRT monitors would have a size of about 1024 pixels around pixel in 768 vertically.  Recent rectangular LED monitors can be usually 1920 pixels by 1080 pixels vertically.  If you take an original photo, which is small (pixel-wise) as 50 x 50 pixels, and then you try to enlarge to fit a full screen, no resolution will cause the individual pixels show that the major places which is what you are complaining.   The solution is to find a photograph to display that has a higher resolution pixel... ideally something approaching the resolution of your screen.

    HTH,
    JW

  • Buttons of passport camera blackBerry - much too strong and necessary to decrease the volume

    The volume of the tone to hit the keys behind doors closed to take a photo or a video start and end is up and I want to lower.  The volume at settings-> main Volume control has no effect.  There is no volume for buttons in camera setting and the user manual does not address this issue directly.  I spent a few hours searching forums and site Web de Blackberry and can't find answers.

    Could someone tell me please how to turn down the volume button in camera?  I prefer not to distract or startle a room full of people, when I want to take pictures or video.  Thanks in advance!

    NSwanson wrote:

    The volume of the tone to hit the keys behind doors closed to take a photo or a video start and end is up and I want to lower.  The volume at settings-> main Volume control has no effect.  There is no volume for buttons in camera setting and the user manual does not address this issue directly.  I spent a few hours searching forums and site Web de Blackberry and can't find answers.

    Could someone tell me please how to turn down the volume button in camera?  I prefer not to distract or startle a room full of people, when I want to take pictures or video.  Thanks in advance!

    Switch to Silent Mode.

  • L850 - 1 5 satellite replacement battery - do not load and not detected!

    Hi, I recently bought a replacement battery for my Satellite L850 - 1 5 as the stock battery was fried. The stock battery couldn't hold a full charge for more than 10 minutes.

    The replacement battery fits perfectly into the battery compartment, but the laptop does not light when the battery is in. It is not even turn on if I plug the charger ONCE I insert the new battery.

    Basically this new battery does any record with the laptop, it won't load or anything... Is it possible that it's just a battery of spleen?

    Any advice or help is massively appreciated!

    Thank you

    > It is not even turn on if I plug the charger ONCE I insert the new battery.

    In my opinion the new battery isn't fully compatible.
    Probably its a cheap Chinese product and not genuine battery out for the L850 series.

    I have no other recommendation for you than buying new, authentic and fully compatible battery.

    The battery 6 Toshiba PA5024U-1BRS (and PABAS260) must be compatible.

  • BlackBerry smartphone keyboard tone too strong...

    Keyboard tone too strong and disruptive...

    Is it possible to reduce the volume of keypad?

    Without creating a profile.

    In the sound settings you might cut completely from tone or lower found notification, but would personally turn off the tone.

  • KDL-55HX750... MUSIC BACKGROUND TOO STRONG, SOFT TALK

    HAVE TRIED DIFFERENT SETTINGS, MAY HAVE SCREWED UP!  BACKGROUND MUSIC TOO STRONG AND NORMAL TO SPEAK TOO SOFT... VERY DIFFICULT TO UNDERSTAND HAVING VOLUME UP TO 50's LOW... HOW CAN I FIX IT

    You can reset the TV to default... I know the generic answer, butI don't know your game. You can go to esupport.sony.com and enter your model number for more details.

  • Hi, when I click on the blue arrow on my widget options, its not letting me see everything cos its too big. and I can't scroll upwards or downwards to see the options. It might be a resolution problem do not know. Help.

    Hi, when I click on the blue arrow on my widget options, its not letting me see everything cos its too big. and I can't scroll upwards or downwards to see the options. It might be a resolution problem do not know. Help.

    Hello

    Have you tried to rename the folder Preferences for Muse.

    Nearby Muse > GB appdada % in windows explore > rename the folder named as com.adobe.AdobeMuseCC.2014.3 in com.adobe.AdobeMuseCC.2014.3_old.

    Concerning

    Vivek

  • Yahoo mail and other small sites print and can not adjust. This is not true with the Explorer

    When I open my yahoo home page printing is of normal size and can be adjusted. In yahoo mail, printing is tiny and I can't fix. Some websites in my favorites also opens in the small print and cannot be adjusted. If I use explore I have none of these problems. I have tried everything I can think and not luck.

    Reset the page zoom on pages that cause problems: view > Zoom > reset (Ctrl + 0 (zero); Cmd + 0 on Mac)

    You can use an extension to set a page zoom and the size of the default font on the web pages.

  • Equium A210 - 17I HDD is not too hot and mobile stops

    I seem to have a hard drive because of overheating - the laptop turns off intermittently and actually feels very hot (especially at the top left of the keyboard)

    I installed a HDD Temperature monitor and it tells me that the disc is currently at 54 degrees, but was up to 64 degrees. It is clearly way too hot and the cause most likely of Islanding. I have the laptop on a USB, fan support to keep it ventilated but this t/doesn't seem to have much effect.

    Everyone knows similar? Can anyone suggest a cause and solution? For what it's worth the drive is a Toshiba MK1637GSX - 160 GB - and the firmware is DL030M.

    Thank you!

    Jeremy

    Hello

    A few days ago, I had a similar problem that the laptop was also very hot. So I cleaned up the laptop with a jet of compressed air, and I was very surprised how much dust came out.
    I followed the instructions in this FAQ from Toshiba document:
    http://APS2.toshiba-tro.de/KB0/HTD7A01ZZ000AR01.htm

    I hope this can help you and if not, you should go to the authorized service provider nearest. They can check the laptop.

  • "Family Vista premium sp2 installed and now printer will not print.__Error message, ' Page too complex" and blank page "print."

    MS installed sp2 on my computer.

    Now, HP Color LaserJet 2840 all-in-one printer, connection direct usb does not print word documents.

    HP printer displays "Page too complex" and prints a blank page.

    USB connected to the printer is established, proven and fully functional until installed sp2.

    I have...
    computer restarted, then tried
    have disconnected and reconnected printer 110 AC, then,.
    printer unplugged 110 AC and USB, computer connection, rebooted, then,.
    removed from all printers in the control panel and the computer restarted, the printer is displayed as connected, but,.

    Always get the error message "Page too complex" and printed white page.

    Help, please.

    Hi livelabel,.

    Please use the forum for answers,

    You can uninstall all the driver/software HP printer utilities.  Visit the HP Web site for the last download driver and utility, reinstall them after rebooting your system.
    Also contact HP any known issue with SP2 for your printer model.  Make sure that file for the print job size is not greater than the printer can handle.

    Let us know if this helps, Kevin
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Reclassification of Viata W7 HP HP; Viata in Spanish 7 in English, incompatibility in the transfer of WindowsEasy. Incredible also, in its regional, my country Venezuela is not so I now have problems in the keyboard language and the motto puntuation.

    Reclassification of Viata W7 HP HP; Viata in Spanish 7 in English, incompatibility in the transfer of WindowsEasy. Incredible also, in its regional, my country Venezuela is not so I now have problems in the keyboard language and the motto puntuation.

    Thanks for your reply but I've solved the upgrade Viata HP to W7 HP Viata in Spanish. Took a lot of effort but is workig now. My major concern is on the regional setting: my country is Venezuela and this is probably the only country that is missing from the long long list so I now have problems in the keyboard language and the motto puntuation. This has nothing to do with the Home Premium edition or full, I think it's just an incredible mistake. How can this be repaired? MS will have remedies this problem and probably to publish an update to fix this problem. Thank you again and hope that this question goes to MS. looks.

  • When I click and drag a window to move its location on the screen does not move properly.

    When I click and drag a window to move its location on the screen does not move properly. It leaves a "track" of windows. Whatever the problem is scroll is also affected when the page moves in waves. Why he started to do this, and if someone can offer a solution? Thank you!

    original title: "leakage" of windows

    It is a common problem with how XP displays the items on your screen. When things get a bit bogged down, you'll start to see trails of the window as you drag. Unfortunately, there is no solution, but future versions of Windows do not have this problem with a new rendering of the graphics system.

Maybe you are looking for