Its microphone is not heard when you place a PC-to-PC or mobile / fixed call

Similar Questions

• Could you please let me know if Flash Player will inform a user that its system requirements are not enough when you try to use a version of Flash Player?

  Hello

  Could you please let me know if Flash Player will inform a user that its system requirements are not enough when you try to use a version of Flash Player?

  Concerning

  It depends, but generally, no..

  Guidelines for the minimum system requirements are especially on what we and won't fix the bugs for.  Flash Player probably works on Windows Server 2000 and we will not intentionally break it or prevent you from installing, but we will also not fix it if it breaks.  In cases where it will crash on launch or some other out-of-box horrible experience, like trying to install on a Mac PowerPC, then we will prevent pure and simple installation.

• No video just audio when you place them on my time line

  I've been editing with adobe pro CC for awhile first and only today, after upgrading my CC from 9.0 to 10 I had a problem where I have the audio when you put video clips on my time line. For some reason any its not bringing don't not the full file in. I played video clips on another program and they work and its fine and when you drag them in the first pro library, they have the preview and I am able to do scroll the video ok it's just when you place on the time line its not bringing don't not the video with her.

  In looking at some of the clips in the project Panel, they are not showing the icon that indicates there is an audio file on the clip.

  On this line at the top of the page, the miniature of a clip from gopro, central element has no icon in the lower right corner. This is just the video as much as PrPro can see.

  The good article, the tile with two icons below on the right... these icons are first that it is used on a sequence (hovering above him and he'll even tell you how much time it is used) and the second icon, it's that it has linked audio.

  So... is not audio clips, or the way in which it has been imported to the PrPro is not 'see' the audio file linked... or the database/cache is screwed upward. I think that these are the three main options.

  So... using MediaInfo to "see what is inside your media" or play them elsewhere, did sound?

  If so, how do import you them into PrPro?

  Can you make a new project, import the clips and have his "appear" with the clip?

  Neil

• Why always, I received management is not available when you use maps for the iPhone 6 and I live in the Qatar?

  Why I always get direction is not available when you use maps for the iPhone 6 more?

  Currently I live in the Qatar.

  Hi Alison, Sameh

  The reason why you see directions is not available, it's that for cards of Apple, turn-by-turn directions is not a feature that is available in the Qatar. You can search for places and satellite imagery
  Take a look at the link below for more details on what features are available in the Qatar.

  iOS 9 feature availability
  http://www.Apple.com/iOS/feature-availability/

  Nice day

• Problems with the .exe file programs + System Restore does not respond when you click

  I have Windows Vista. This problem started a week ago. I tried at first to use my "ccleraner" already installed, but this program does not open when you click on it. I was asked to choose the program that the application to use to open it. This has also happened when clicking on itunes. My avast program when you click also asked which application is required to open it. When it finally scanned my system it does no propblems. In addition, I tried to turn on windows defendrer as he told me that it was off. Clicked on 'Turn on..' and nothing happened. Help!

  Hello

  See the following message to solve the problem of .exe if necessary once you are sure that the system is clean.

  Try Mode safe mode with networking - repeatedly, press F8 that you start.

  The best two methods allow scanners to run and/or AV.exe out of the way or removing.

  1.
  CTRL SHIFT ESC - task manager OR right click on the taskbar - task manager

  Process tab - complete the process on AV. EXE and continue with the uninstall Guide.

  If necessary use start - computer or Windows Explorer to navigate to

  C:\Program Malwarebytes Anti - Malware\mbam.exe or where it is installed - if
  necessary right click on the shortcut of Malwarebytes - Properties - tab - target line to see where it
  is installed.

  Right-click on it and rename it to ZZMbam.COM (or something different than now), then
  Double-click it and run it like this. You can rename it back later. Do the same with others
  programs as needed. Use this method for other necessary - DO NOT ASSUMER one
  program removes all or that there is no other malware.

  ---------------------------------------------------

  2.
  Another method is to use them:

  Use Process Explorer to "Suspend" the process will not stop

  Then use AutoRuns to delete the malicious program startup items.

  Now use UnLocker to delete the files in the malware.

  You may need to do a file at a time.

  Process Explorer - free
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  AutoRuns - free
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  UnLocker - free (do not install the adaware Ebay)
  http://www.Softpedia.com/get/system/system-miscellaneous/unlocker.shtml

  AV.exe

  ==============================================

  There are MANY varieties of these with many names, but all can be eliminated with the same methods:
  
  Win 7 Antispyware 2010 XP Internet Security 2010 and Vista Antivirus 2010 is rogue antivirus.
  scams to get you to pay for them while they have no advantage at all.

  How to remove all THE varieties of this malware - please read carefully the removal Instructions.
  http://www.bleepingcomputer.com/virus-removal/remove-antivirus-Vista-2010

  RENAME this as necessary to allow them to perform: (use a different name with the extension .COM instead of .exe)
  
  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run the
  in the regular when windows you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits
  UnHackMe execution)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download
  here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs.
  It is a single scanner, VERY EFFICIENT, if it finds something to come back here or use Google to see
  How to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software (viruses,
  Trojan horses, rootkits, etc.). that has infected your computer despite all security measures that you have
  taken (such as the anti-virus software, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• external device is not detected when you connect to a personal computer.

  Windows 7 pro, pen drive sound edition does not detect when you are connected.

  Yes sir its resolved, so that the new windows 7 pro, its pre disconnected installation mode. so that I can re active in what optins usb boot menu settings.

  Thanks to you all.

• When you place a psd files, they began to incorporate automatically instead of link. Does anyone know how to prevent this? Thank you.

  When you place a psd files, they began to incorporate automatically instead of link. Already linked files remained tied but new will not bind. Does anyone know how to prevent this? Thank you.

  Perhaps this box?

  

• Turning vector file transparent when you place in ps

  Hello

  hope someone can help me. I have a vector image I try to place a PS document. For some reason any, as soon as I click to accept the placement, the vector image becomes transparent.

  (Fortunately) happens only with that particular file so I guess there must some setting in Illustrator that I'm not aware of. I bought the file from a stock image site. (unfortunately I'm not smart enough to create my own lol).

  Any ideas?

  This tends to occur when using mixtures.

  When you place blends in Photoshop, it is caused by anti-aliasing.

  What happens if you export as a raster in Illustrator with anti-aliasing set to the option art-optimized?

• Difference between CS3 and CS4 when you place images, unguarded percentage

  There is something of a difference between CS3 and CS4 when you place images. The images I'm dealing with right now were vector images, but it could apply to all sorts of images.

  When you replace an existing image, the behavior of CS4 is to leave the image full frame. In CS3, the percentage was set at 100% as default (% see you when selecting the image, not the container).

  Also when you replace an impage in CS4, the 'internal' picture frame is maintained, while in the C3, the percentage was limited.

  Y at - it sort of investment preferences / settings leave CS4 same wat like CS3 did, when you place an image?

  -Andreas

  If reliinking keeps the scale or dimensions is now a part of preference in CS4, if that helps.

  You can play with this setting and do a few manual rebinding to see if something is appropriate. I'm not a script, but I think you can reset this preference as part of a script.

  Peter

• Under TOOLS/Account Settings / your name / what I chose for "your name" is not displayed when you send an email. What should do? Thanks, paul

  Question: Under TOOLS/Account Settings / your name / what I chose for "your name" is not displayed when you send an email. What should do? Thank you! Paul

  This looks like a problem with your email service, not with Firefox (or Thunderbird).

  It is possible that you need to set the name sent by logging into your webmail account online (e.g., Yahoo! Mail or Gmail). Web e-mail providers like these often put sending appoint themselves, ignoring the settings of your email client.

  Unfortunately, since it is not a matter of Firefox you're unlikely to get help on these forums. I suggest that you find the support site for your e-mail provider, as they should be much more useful.

• In number. How do I lock you in a function such as highlighting a cell so it does not disappear when you move to another cell.

  In number. How can I lock you in a function such as highlighting a cell so that it does not disappear when you move to another cell.

  Hi Philil,

  Do you mean pointing out the contents of a cell, or "stressing" the cell itself (by placing an on bottom border)?

  Formatting content will transfer to another cell if you fill in the other cell content, or copy from a single cell and pasting it into another.

  Borders applied to a cell or group of cells may be applied to another cell or group of cells by selecting the first cell (single click), the format of this cell or a group of cells copy (Format (menu) or option + command + C > copy Style), and then selecting one or more other cells and stick to the format (Format (menu) or command-option-v > paste Style.)

  'Format' in the case of cells includes the color fill, color text and other text attributes, content, format (text, number, date & time, duration...), borders...

  When you copy the style, all format attributes are copied.

  Kind regards

  Barry

• Microsoft Pinball Arcade, everything works except the right flipper does not work when you run the game. __Keyboard is very good

  Microsoft Pinball Arcade, everything works except the right flipper does not work when you run the game.
  Keyboard is fine.  Is this a compatibility issue?

  ---------------

• Acer toggle display does not display when you use the Fn + F5 key secret on my Acer Aspire 5560

  What it does:

  When you use the Fn + F5 key combination on my Acer Aspire 5560, it brings up a screen changes on the laptop screen for the selection of an external monitor, I am currently using Windows 7 Ulitmate

  Before the problem:

  Display mode switch Acer existed prior to the upgrades of the drivers

  The problem:

  The toggle screen Acer does not display when you use the Fn + F5 key secret on my Acer Aspire 5560?

  Additon Information needed to solve the problem or any other information:

  I would like to know what driver or software operates the Acer toggle display Mode?

  Also where can I find this driver for computer: Acer Aspire 5560 to bring this Acer toggle display Mode function?

  Acer Toggle display Mode: this is a picture of it when you use the Fn + F5 combination:

  

  Thank you very much Ironfly Ace, it has worked Acer hero of the day

• AutoPlay feature does not work when you insert a CD-ROM into the CD drive

  Original title: computer disc drive

  Download or CD extract of music reading, record music, download CD etc... Before my hard drive had to be replaced, when a disc is inserted into my computer, a window appears, asking what you want to do... Burn music, Rip, copy in folder etc... now when I insert a disk, the window no longer appears, which gives you options and you get to this site... How can I get that back?

  Hey Big-Mack,

  Try the steps of troubleshooting mentioned in the following article and check the result.
  See the enforcement function automatic or AutoPlay feature does not work when you insert a CD-ROM into the CD drive

  If the problem persists, run the Autoplay Repair Wizard and check the result.
  See Autoplay Repair Wizard

  Play functionality; New in Windows Media Player 12 makes it easy to listen to the music, video and photos from your computer to other computers, TVs or stereo on your home network.
  For more information, see play in

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error blue screen STOP: 0x0000007e. I powercycled the sys, unable to choose for sure (keys do not work when you try to select a mode) sys is trying just to go back to the blue screen. Help, please

  STOP: 0x0000007e (0xc000001d, ox8537008 0xba4c3508 0xba4c3204) and the system would not come to the top.

  Error blue screen STOP: 0x0000007e. I powercycled the sys, unable to choose for sure (keys do not work when you try to select a mode) sys is trying just to go back to the blue screen. Help, please

  Symptoms: Booted computer, loaded the raid drivers and showed at the start screen XP for half a second then to BSOD with a Stop error Code 0x0000007E - see also a lot of users (0xC0000001D, 0 x-, etc.) as well.

  Solution:

  1 boot from your Windows XP CD and start the recovery console. You may need to press F6 while RC loads in order to load the SATA drivers. you will have a prompt c:\WINDOWS to the console.

  2. type: CD $NtUninstallKB977165$ \spuninst (it's the update, I had to uninstall to get out of the boot loop, other updates can be uninstalled by changing the name of the directory to $NtUninstallKBCODE$, where KBCODE is the code KB)

  3. type: BATCH spuninst.txt

  4. type: exit

  Don't forget to configure your system to boot from the HD before resuming. I hope this helps. Saved me a lot of hassle today.

  -Tom Steele
  http://www.hawkandtom.com Tom Steele