No video just audio when you place them on my time line

Similar Questions

• Satellite L300 - 29 X just crashes when you use some of the programs installed

  I bought a Toshiba L300 29 X for my daughter (30 years) help in its work of the University.
  Since we took this home and installed the OS it is questions. At first, I thought it was to do with Vista and so I bought the upgrade to Windows 7 and installed, but the same issues are there it just freezes when you use some of the programs installed.

  I tried restoring factory several times with Vista and still once I even made restoration to the first State to install W7 disk then updated from the web and then she still uses it for his United work and it freezes.

  There is nothing wrong with his work United as when using my laptop or even its partners a there aren't any issues or problems.
  Programs are in Office 2007 and it is the same copy I have in my laptop and they are both up-to-date.

  Its mobile partners is lower than its own specification and has less RAM so that to have only a single processor.
  I tried to install the W7 as a 32-bit and a 64 bit OS, and whenever there is any change in the problems with programs

  Can someone out there suggest a possible cause or same difficulty for am I at the end of my knowledge on this issue and my daughter is about to throw the thing out the window.

  Hello

  I think that the described issue could be related to a hardware problem, given that the laptop should not have problems running the Microsoft Office applications.

  In many cases, the s for laptop system could freeze due to a higher temperature.
  My girlfriend repeatedly asked for help because the laptop froze too.

  But the problem was linked to a higher temperature because cooling fans were clogged and cooling fans might not work correctly. She used the laptop sitting on the couch and there was not a lot of free space around the laptop to ensure good air circulation

  I want to say is that there are several reasons for such behavior annoying cell phone I think it would be wise to check the hardware first
  This should be done by the technician of the ASP.

• When you place a psd files, they began to incorporate automatically instead of link. Does anyone know how to prevent this? Thank you.

  When you place a psd files, they began to incorporate automatically instead of link. Already linked files remained tied but new will not bind. Does anyone know how to prevent this? Thank you.

  Perhaps this box?

  

• My pictures just disappear when I unlock them? pls help, do not know too much about photoshop ^^

  My pictures just disappear when I unlock them? pls help, do not know too much about photoshop ^^

  Hi Sebastian,.

  Please post your request in the appropriate section: https://forums.adobe.com/community/photoshop

  Kind regards
  Rahul

• When you place the object from Illy, how to ID design work to present plans

  Could someone guide me through to placing it objects in documents of identification of an Illustrator file with multiple layers? It presents only the work plans that are present in the surface layer? Or is it all visible layers?

  When you place the file, choose display options.

• Turning vector file transparent when you place in ps

  Hello

  hope someone can help me. I have a vector image I try to place a PS document. For some reason any, as soon as I click to accept the placement, the vector image becomes transparent.

  (Fortunately) happens only with that particular file so I guess there must some setting in Illustrator that I'm not aware of. I bought the file from a stock image site. (unfortunately I'm not smart enough to create my own lol).

  Any ideas?

  This tends to occur when using mixtures.

  When you place blends in Photoshop, it is caused by anti-aliasing.

  What happens if you export as a raster in Illustrator with anti-aliasing set to the option art-optimized?

• When you place an image in InDesign, it seems pixelated.  It is a 66 MB file in a 6 x 9 "paper.

  I'm new to InDesign, I created all of my documents for printing in Acrobat PDF format.  When I place an image, it will appear pixelated.

  Hello

  This is an expected behavior, when you place an image in InDesign, then it displays a preview of the image but you has no impact of the exit, unless the image is of low resolution itself.

  In order to have the correct resolution of images, you can switch to view > display performance > high quality.

  Thank you

  Manish Sharma

• [CS5] [JS] With the help of import options when you place an image

  Hello

  Does anyone know how to add import options when you place an image?

  I would like to activate 'Apply Photoshop Clippingpath'.

  Currently I use...

  myRectangle.place (myPicture);

  Or is it an application setting?

  Thanx

  John

  Seems that you can call to the properties of an imported file may include the ClippingPathSetting preferences. It is the object of great CS5 Jongware model.

  

• Difference between CS3 and CS4 when you place images, unguarded percentage

  There is something of a difference between CS3 and CS4 when you place images. The images I'm dealing with right now were vector images, but it could apply to all sorts of images.

  When you replace an existing image, the behavior of CS4 is to leave the image full frame. In CS3, the percentage was set at 100% as default (% see you when selecting the image, not the container).

  Also when you replace an impage in CS4, the 'internal' picture frame is maintained, while in the C3, the percentage was limited.

  Y at - it sort of investment preferences / settings leave CS4 same wat like CS3 did, when you place an image?

  -Andreas

  If reliinking keeps the scale or dimensions is now a part of preference in CS4, if that helps.

  You can play with this setting and do a few manual rebinding to see if something is appropriate. I'm not a script, but I think you can reset this preference as part of a script.

  Peter

• Firefox does not open after the update. Cannot open the profile technical, even when you use the directory in cmd line path

  I'm using Firefox on a Windows 7 computer. Firefox does not open after the last update. I read the help articles and it seems that I need to create a new profile because my settings were probably corrupted. I'm unable to open the profile technical, even when you use the directory in cmd line path. I tried the following commands in the command line:

  Firefox Pei
  "C:\Program Files (x 86) \Mozilla" PEI

  Nothing happens with every order.

  I am also running Norton Internet Security. I read a help of virtual navigation features Re article that can cause a problem. The article says to check the setting of virtualization in the internet security software and to clear the virtual cache. I went through all the menus of settings in Norton Internet Security version 21.6.0.32 and I don't see anything that looked like in "virtualization" settings, so I guess that does not apply to me. "

  If you have any ideas, I had appreaciate that your expertise!

  Hello arcandl, at the launch of the firefox is not after you double-click the shortcut, it is sometimes also a sign of active malware on a system.
  you might want to try running a scan with some various other security like the free version of malwarebytes and adwcleaner tools that are specialized to remove the adware and browser hijackers.

  Fix Firefox problems caused by malicious software

• How to move audio files of the program in the time line?

  All of a sudden I can't move audio files of the program in the time line - I read that Adobe said in previous forums click with the right button on the A1, but nothing in this discussion has helped me solve this problem. It was working before. I am a beginner user, so I could be missing something really obvious. My time scale is in blue. I noticed in some tutorial videos that it was yellow.

  Hi lauranoel,

  The reason is due to a bug, explained here: FAQ: why no audio or video will not at the track where I drop?

  Next time, just remove and In or Out to mark, and then drag the clip.

  Thank you

  Kevin

• When you place the images taken from video, I am unable to get audio to place.

  When a video placed on my clip, the audio does not mean on this subject - it gives me just the clip. They have audio in him. For some reason, it does not.

  When you click Open in the Source monitor and placing just the audio, it does not either.

  Thanks in advance,
  Michael.

  Is your patcher Source and target tilt pathway on set correctly?

  

  MtD

• Reference Audio Dell - will automatically switch on the headphones when you plug them.

  XPS 9350 - 10 Windows

  Can I do Audio Dell (or something) automatically route the sounds of my helmet when I plug them?  I saw no option in the Audio from Dell menu to toggle this option.

  I do a bit of work to the library of my school, which means I have to be quiet.

  The problem is that when I plug my headphones, I have to wait for Dell Audio for pop - up and then I have to confirm my selection of "headphones with microphone" above all sound will go to them.  Then only will be moving to my helmet.  While I do this, my computer starts hanging and beep all the recent notifications for anyone nearby to hear, until I do the confirmation.

  To make things worse, if I plug my headphones on the Windows lock screen, and then log in, Dell Audio pop up just never came up. However, I still give it Windows notification Center make me notice, but it is non-interactive.  Then I have to unplug the headphones, expect that all of the alerts saying I have disconnected something go, then plug the new.  If I wait more for alerts clear selection Windows Audio Dell don't is not loading.  Once again, beeps and dings are once I have connect and do all this.

  Of course, it's just as much I na not mute until I closed the lid, the last time that I used it.

  SOLUTION: the context menu is not clear.

  If you check the option at the bottom telling not to appear whenever something is plugged in, it will automate just about whether you connect (at least I can assure you that for "headphones with microphone").

  The way that the radio button is made, simply looks like it's supposed to just disable the pop up and nothing more.

• No Audio when you import videos in the timeline?

  Hello everyone. I came across a problem that I can't get my head around.

  I tried to import a set of videos I recorded Via an ingame recording software called Overwolf. The clips will work perfectly with audio on VLC + Windows Media Player drive. However, when you import videos to the Prime Minister to be edited, they do not have any audio file attached. I searched around other topics similar to this one and have had no success.

  Any help would be greatly appreciated.

  Alex

  OK, files not real camera.

  Still think you should try the brake hand.

• Loss of audio when you import video clips into PrE12 of Nikon D7100

  When you import video clips into pre 12 from organizing the audio becomes uneven (guard droping in and out).

  Clips will play finme in Movie Maker and his plays ok if played within the Organizer, so I know they are. He PC is using windows 7.

  Taken the Nikon D7100 1920 x 1080 30 p (29.97 real rate).  Film are displayed as. MOV and Document Type video/quicktime playback of other threads and works wonder if the question relates to the project settings.

  Digital SLR Edit Mode project settings;  Time Base 29.97 pictures / s; Image size 1920 x 1080; Pixel Aspect square; Calendar-view Format 30 fps drops;  Audio sample rate 48000.

  Can someone tell me what settings should I use for a Nikon D7100.

  Thank you

  Popeye

  What are you - right click the icon on the desktop for Premiere Elements, and then select run as administrator? If so, please return to post 3 where I wrote

  You definitely need a user with the privileges of the administrator account. QuickTime as well as Premiere Elements require that. Sometimes a run as administrator (right-click the icon of the program Office) and selecting run as administrator can help. Please check it out. The permissions are important.

  RTA