Its too strong Apple Watch after alarm or timer
Hi all
I noticed something very odd on the Apple Watch, whenever I put a timer or a clock radio, when it sounds to wake me up or to tell me that the timer is finished. It makes the sound on Apple Watch very strong after that. For example, when you receive notifications, send messages, etc. it's like the volume is two times stronger than before...
The only solution I found is to restart the watch or to go into the settings, turn down the volume all the way, and then I put the volume to full. It seems the ring timer or alarm to change the volume of the watch.
Hello If you have not yet done so, it may be useful to update your iPhone and Apple Watch for the latest versions of software (currently 9.2 and watch OS 2.1 iOS). To update your watch to a version of software before watch OS 2, your iPhone must be running iOS 9 or later version. The software update instructions are available here: - Update the iOS on your iPhone, iPad or iPod touch - Apple Support software - Update the software on your Apple Watch - Apple Support Otherwise, it can help to disable the twinning and re - pair your watch. The app shows on your iPhone shows backups automatically, including a new when the disparity with the app choose this option to restore the watch (backup restore) when provided the opportunity during the whole. Most of the data and settings will be restored, with a few exceptions (for example cards Pay Apple, access code). - Pairing your Apple Watch and Support Apple - iPhone - Set up your Apple Watch - Apple Support Tags: Apple Watch Apple Watch after upgrade to watch OS 3 - flashing screen after update Apple Watch 42 mm I recently like millions out there I've updated my Apple Watch to watch OS 3. Today noon 15/09/2016, I noticed that when I raised my hand/wrist to wake up screen Apple Watch it flickered once. I did this action several times to confirm that I clearly understand what was going on. I started to solve the problem, powered off/on power the Apple Watch. Issue continues. I did a reset on the Apple Watch hold the button of the Crown and the power at the same time until the powers of the device and restart. This action eliminates the problem. Apple Watch works as expected, screen flicker stopped when hand/wrist is triggered and screen Apple Watch wakes up to the top. Unfortunately, after some time between 2 and 3 hours of new screen flickering starts. I did some digging online but have not encountered this problem. I realize that the watch OS 3 has only been published days before so I wasn't expecting to fall on part. My question: is this a known problem that will be patched with an upcoming release or I'm the first to report this problem? Any information would be much appreciate. It is too early to know if it would be regarded as a known issue. This is not the case on my Apple Watch after the update. See if a matching and re pairing your watch makes a difference. Cancel the twinning of your iPhone - Apple and Apple Watch Support How can I make a phone call from Apple Watch after the update of the software lasted? I don't know how to make a phone call from my Apple Watch after this update. I need help Hello Under watch OS 3, the friends feature (which was available in previous versions) comes over and there is no direct replacement for it. When making calls or sending of new messages, contacts instead can be selected via the phone and Messages applications or using Siri: Do you need to recalibrate Apple Watch after software update After the update to the latest version of the software my known distances do not record correctly. They are off by about 10%, which means that running/fast market records 5 miles 4.5 miles. Not sure if that happened with all previous update. Hello No - it is not necessary. However, if you want to reset your calibration data and all start from scratch: Then follow the instructions here to calibrate your watch again: Unable to pair Apple Watch after a reset My new Apple Watch replacement was paired with my iPhone yesterday after that I received it. This morning it froze (black screen) and I followed the instructions to reset. It was not to find my phone so I unpaired it. Now when I try to pair matching image does not appear, and there is no device listed to allow manual synchronization. I tried to reset my iPhone and watch again, but nothing works. Hello Clarify the status of your watch, as well depending on your watch and your iPhone. For example: Watch Is your watch still operational, but just disconnected? You always have access to the face of the watch and other functions, but with an icon of disconnected state indicated at the top of the face of the watch at the time display? Or is it odd - and asks you to choose a language when you turn it on? iPhone In the app shows, go to: Watch My: -Is your display shows at the top of my watch? -If you press it, then press the 'i' icon next to your watch on the next screen, the status of the next screen "Matched" above the name of the watch? Also In your question you say "it was not to find my iPhone." Please specify what you mean by that. Localixstion works only on Apple Watch after updating iOS 9.3.1 After the update to iOS 9.3.1 I notice that location no longer works on my Apple Watch. I tried to restart my iPhone and Apple Watch without success... Any suggestion? I I updated yesterday and when I turned on it today it said I lived in NYC, but I live in Michigan. with the part weather do not know if it is the same, I had unpaired location and click on my home country I him have never had that. He also didn't tell me raise or a sunset over and my phone would not connect to wifi initially, I had to stop him and he repower How to start Apple Watch after update? I installed the software Apple Watch and after installation of my watch was not running. I tried pressing and holding button down, but it only gave me the option to reset my watch. How can I restart my watch without resetting? Hi Roy First of all, you need to remove your watch on the charger (the cursor off the power is not available when the watch is turned). Then: -To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off. -To reactivate: press and hold the side button until you see the Apple logo. Everyone can not open Wechat of the Apple Watch after the last update? After the update for Wechat around the end of 2015, I can't open the app to Apple Watch. Whenever I tried to open the app, a loading screen came, and then the application leaves itself. Someone help please? Thank you! I already have the Apple Watch combat and reinstalled the Apple Watch. I can always open the app. I use a system of 2 OS on my watch and an iPhone iOS 9 5 C. If you have not already done so, it may help to update your iPhone and Apple Watch for the latest versions of software. Update the software on your iPhone, iPad or iPod touch - Apple Support iOS Update the software on your Apple Watch - Apple Support If not, try the following steps: Cannot add new bank cards to my Apple Watch after update to monitor OS3 How to add credit cards to my Apple Watch shows OS3? Hello Make sure that you follow all the steps here: To be able to add cards to pay Apple on your watch, you must have the region setting chosen for her (like on your iPhone): More information: How to reconnect Apple Watch after reset/restore of the iPhone? 9.3.5 ios update bricked by phone and I did a factory reset followed by a restore of backup. Not everything was restored because my Apple Watch is more matched with my iPhone. Is there an easy way to put back them as they were before the reset? When I try to activate my Apple Watch after matching it does not accept my apple ID. My 5s was stolen that had my Apple Watch combined with him (my Apple Watch has not been stolen). I restored my new 5 to my final point of restoration of old 5s, I tried to log in with the apple ID, but could not remember my password so I reset properly, now when I try to pair my Apple Watch to it, it does not accept my apple ID which I know is correct. So I reset my watch. I tried to put the two unit off then but still not good. Does anyone have any suggestions? Hello The following steps can help, including the disabling of Activation on your Apple Watch blocking: Why Whatsapp disappeared on Apple Watch after having installed the 2.1 OS To cancel the possibility of using Whatsapp for my Apple Watch was a good idea! When I boutgh my Apple Watch a guy in the Apple store told me that: "whatsapp now receive only notifications but, in a certain time, you're going to use it fully. It seems to me that we return instead to go further. Hello To receive notifications on Apple Watch WhatsApp Messenger: On your iPhone, in the application of the watch, go to: My Watch (tab) > Notifications > under the heading "alerts iPhone mirror of", scroll down to WhatsApp Messenger > turn on notifications. Also on your iPhone outside of the app shows, go to: settings > Notifications > scroll down and tap on WhatsApp Messenger > check allow Notifications is turned on and also the show in the Notification Center and display them on the lock screen are both enabled. Connect the iPhone to MacBook and Apple Watch at the same time? Hello world Is it possible to simultaneously connect the iPhone to the Apple Watch and MacBook via Bluetooth? Would be wise to have this feature to enjoy the continuity between all 3 devices (and taking calls, etc.). I tried to do this, but my iPhone and my MacBook do not connect to each other. Thanks in advance. My iPhone connects to my watch , 2 Mac, iPad 2 and 2 iPhones using the parameters of continuity. I can take and make calls on 7 devices when connected to the same WiFi network. For Macs, it must be new enough to support BlueTooth 4. How do you access contacts on the Apple Watch after upgrade iOS 10? Previously, a press the button below to access contacts. Now, what? Hello Under watch OS 3, the friends feature (which was available in previous versions) comes over and there is no direct replacement for it. When making calls or sending of new messages, contacts instead can be selected via the phone and Messages applications or using Siri: Evolution of the Apple Watch and health monitoring time Kit I work the second shift, so my 24 hours are different than most. I was wondering if there is a way to change the Kit Fitness Tracker/health monitoring times? Hi Patrick I'm afraid that the feature you described is not currently available under watchOS. If you want to suggest that Apple considers adding this as a new feature, you can do it here: https://www.Apple.com/feedback/watch.html All submissions are read (even if you do not expect to receive a response). FF14 is blocking at random after every 15 minutes. There's a general problem this problem after the update of FF13. All plugins are up to date. No viruses on the system. Have no solution? Thank you I just installed Java and now I get an error for the processing of JSP original title: JSP processing error I'm trying to understand what JSP processing error and how to fix them. We just did an update for JAVA, and then we get this error. I don't understand resource of portlets and permission. How can I fix it? Where a template for bulk changes to the first point 2.2 I've recently upgraded to 2.2 first and can not find where to create and publish a model to get for my switches configuration changes. Where is this option because I find it anymore? Terence Connection rs232 DMP 4400 with samsung 40 '' lcd Hi, I m test the dmp with a samsung LCD. I m using the rs-232 interface just to turn on and turn off the monitor. I have the same questions: 1 - rs - 232 cable to be used directly? null-modem? The documents that I checked don't mention that. 2. I was Hello I'm trying to configure an ASA to contact an AD environment that is only using secure LDAP (LDAPS). I have configured the authentication of the ASA with LDAP a lot of times, but never with LDAPS. Is this possible? Without doubt, there is a procSimilar Questions
Maybe you are looking for