Connection rs232 DMP 4400 with samsung 40 '' lcd

Similar Questions

• DMP 4400 cannot read local files

  I use a DMP-4400 with firmware v.5.2.2. The device connects to the network fine and is able to display Web pages on the internet without problem; the ftp server works well also. However, when I try to play any type of local file (located in/tmp/ftproot/usb_1 /) the screen remains blank. I'm assuming that the files because the failover URL is not displayed for .mpg or .html files. I use video files of type MPEG-1 for testing. I have attached one of these videos with a sample file .html that I intend to use a loop of several files.

  Video files are managed using the:

  "/ tmp/ftproot/usb_1/melt.mpg" is entered in the dialog box 'Storage path' under ' play video file stored locally "the GUI.

  HTML is launched using:

  "file:///tmp/ftproot/usb_1/play-local-mpg.html" is entered in the 'URL' dialog box under "URL to display" the GUI.

  These problems if the files are located on the internal memory or external USB disk. Any help will be much appreciated.

  Peter,

  I was able to fix, the issue seems to be with the content, I converted with VLC Player MPEG-TS and it works. Please find the attached transcoded file.

  Use

  playlist var = new Array)

  'file:///tmp/ftproot/usb_1/test1.ts '.

  ) ;

  If this meets your concerns, please mark this message as 'response '.

  Thank you

  Sagar Dhanrale

• DMP 4400 G RS 232 connection with Cisco LCD 100 PRO 40N

  Hello world

  I know this question has been asked a little before, but I still have trouble affecting the DMM to control Cisco LCD 100 PRO 40N (Samsung) via the RS232 DMP connection!

  I searched and read every post on this forum, ('Samsung_MDC_RS232_Protocol_Ver - 21.pdf' & rs232.tx_hex =) tried but not vain.

  We have DMS VmWare demo (signs & Cast 5.2, Show and part 5.2) and 4400G with firmware 5.2.

  Also, I connected the series RS232 9 pin female to female that came with the TV on the DPM 4400 G and in the port RS232 TV, configured the DMP in the Task tab view control forward as you can see in the picture to set and define the type of TV for Cisco 40N and Power ON and another task for the display OFF. What I'm doing wrong here!

  Any input will be greatly appreciated!

  You must first activate rs232 on the DMP.  For Cisco views, use the system task called "RS-232: control supported, non-DMTech poster.  This will cause the DMP restart.  Once it has restarted, you should then be able to use the rs232 codes or the built in display of DMM controls.  I tested on the same Cisco display with cable included as has managed to turn the screen off and back on orders of DMM.

• while I connect to my computer with the samsung wave y kies wi - fi computer displays an error as a peripheral denied connection permission, please provide the solution.

  while I connect to my computer with the samsung wave y kies wi - fi computer displays an error as a peripheral denied connection permission, please provide the solution.

  earlier, I used internet and transfer files through this link, but now it is showing the device refused permission. I have checked all the settings, but could not remedy any problem so kindly help me so that I can connect via wifi to my mobile samsung kies.

  Also, I am facing problem in sending files via Bluetooth, and at the same time my mobile can easily transfer the file and the music file actions with my computer via bluetooth which I did not understand.

  Rental offer the solution to both problems. In my computer I have window7 profeessional.

  Marie-Odile THE

  Hello

  1. What is the brand and model of the computer?

  2 have you made any changes to the computer before the show?

  Reinstalling the Kies application and check if it helps.

  See this link:

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  I also suggest you to contact Samsung and check: http://www.samsung.com/us/support/

  Regarding Bluetooth check out these links:
  

  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Bluetooth devices do not work correctly on a computer that is running Windows 7:

  http://support.Microsoft.com/kb/980396

  Also see this link: http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  Note: The article mentioned above is also applicable to Windows 7.

  I hope this helps!

• Should what cable I connect a Libretto U100-105 to a LCD TV?

  Should what cable I connect a Libretto U100-105 to a LCD TV?
  The pc has an external monitor port, but I can't tell what kind of connector, it is, since I have never seen one like this.
  Thank you

  Hello

  It all depends on the available ports.
  To my knowledge the U100 supports a Mini VGA Port and an adapter was supplied with the laptop.
  http://en.Wikipedia.org/wiki/Mini-VGA

  In your case I am looking for a cable that is capable of connecting a mini VGA port with a port VGA (RGB) common, which is probably available on your TV

• Connection G30-161 to the HDMI on LCD TV

  Hi, I just bought the G30-161 and I was wondering how to connect to a HDMI input on the LCD TV. It does not have the HDMI, but has the other connector of D2. I tried to find conversion leads, but have not met any. Does anyone have any suggestions? Thank you

  Hello

  In my opinion there is no sense to use on your LCD TV HDMI port if the laptop has no HDMI output port. If you use a different video output port you won't be HD quality. The same situation is with my Qosmio G20. My LCD TV has HDMI port, but I'm using delivered cable SCART to connect.

• How to connect by Satellite L300 laptop to a LCD TV

  I'm trying to connect my laptop L300 satellite to monitor LCD tv via the VGA port. I have trouble getting the entire desktop on the TV. The left side of the screen is not visibe and there is a black band on the right side of the screen. I have vista home premium edition installed and I'm using resolution 1360 x 768. Could someone please help me solve this.

  My portable computer satellite L500D connects very well with the TV using xactly same settings.

  Thank you

  Hello

  Please check in the settings of your graphics card, if the option: full screen (no border) was chosen.
  This can be found in Aspect Ration Options.
  I have a U400 with Intel graphics chip and this is available here.

  In addition, some laptops support an additional option of BIOS where the screen can be set to mode full screen (without borders)

• Connection ethernet or GPIB with Keithley 2612

  Hallo

  Here's my situation:

  I'm relatively new to LabVIEW programming and want to install a configuration of measurement with LabVIEW and a SMU double Keithley 2612.

  If I m work myself through Labview Beginners Guides and how to connect a measuring device with the first simple LabVIEW program.

  Since I Don t own a GPIB-USB adapter for the moment, I was thinking of using Ethernet for the EMS connection that gets ist own IP address. The connection to the PC works and SMU SMU ethernet can be remote controlled.

  Here's my problem:

  I can´t find (usable) guides for the installation of LabView via Ethernet.

  My 500 pages book 'Introduction to LabVIEW' (as of 2009) doesn´t have even a hint for an ethernet connection, while the GPIB, RS232 and CAN are covered pretty well.

  Here's my question:

  Should I continue to try to get LabVIEW working on Ethernet, or would it be better to buy a new adapter USB GPIB.

  Does anyone know good Howto for creating Ethernet connections?

  Should I just the bad 'Introduction to Labview?

  The use of Ethernet has disadvantages compared to the GPIB-USB?

  I'm happy to answer additional questions.

  Thank you.

  Download the Labview driver for the series of 26xxA from Keithley web site.

  For a Visa resource string use something of the form: "tcpip::aaa.bbb .ccc. ddd::instr" where aaa.bbb.ccc.ddd is the ip address of the instrument that you can get through the façade or run MAX and auto-le discover.

  When you finally get a USB-GPIB converter all you have to do is change the resource in the form of gpib string: GPIB::XX:instr «»

• DMP 4400 and 4305 in 5.1

  Hi Tomas

  I use DMP 105, 20 of which are 4400 and 85 g 4305. In everything we set the resolution in wide screen 1920 x 1080 high. The video sources used have been created in SD and HD. Played on the DMP, the video is not visulizado, leaving a black screen. If the DPM configured in 1366 x 768, the video OK. With web resolution 1920 x 1080 pages work well.
  If I change all this resolution dmp cause me more problems that are the web pages It Works with information and configured with this resolucion1920x1080.
  The videos are in MPEG2_TS format
  I have an urgent response because this client is to buy 100 more DMP 4400

  Claudio,

  Can you please provide the following so we can watch

  possible questions?

  Of a DMP that has this problem.  Access the

  DMP - DM Web interface and get shots of the following

  Screens:

  *--> Browser settings

  Settings--> display attributes

  * Settings--> DMP display Dimensions

  * About--> material and Versions of Firmware

  Then, download Media Info and use this tool to get the

  output of 'text' of having the video file media info

  the question.

  http://MediaInfo.sourceforge.NET/en

  Please post or set the text of the video file output.

  If all goes well, after getting this information we can restrict

  to the bottom of the issue.

  Thank you

  T.

• blutooth keyboard does not work with Samsung Slate.

  I'm not able to use my blutooth keyboard is more for my samsng slate xe 700.i lost the key number to pair the blutooth devices

  Hello

  1 have there recent changes made on the computer before the show?

  2. What is the number of brand and model of the Bluetooth keyboard, you're trying to pair with Samsung Slate?

  3. what happens when you try to connect the keyboard with Samsung Slate?

  4. If it works much earlier?

  I suggest you to please follow the steps mentioned below and check if it helps.

  Method 1: Open the hardware and devices troubleshooter.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: Connect to Bluetooth and other wireless or network devices.

  http://Windows.Microsoft.com/en-us/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices

  Method 3: Remove and reinstall the device.

  a. click the Start button, select Control Panel, click hardware and sound and then click Bluetooth devices.

  b. Select the device that does not work, then click on remove.

  c. click Add, press the reset button on the unit (or make it discoverable following the manufacturer's instructions), select the device is set up and ready to be found check box, and then click Next.

  d. If the apparatus does not, repeat the previous step. When the device is found, select it, and then click Next.

  Follow the remaining instructions in the wizard.

  • Make sure that the device is on and that the batteries should be replaced.

  ·         Check the status of service Bluetooth and make sure that it is started.

  • Make sure that the Bluetooth adapter for your computer is attached and turned on, and that the device is in use and detectable. If you don't know how to turn on discoverability, read the instructions provided with the device or check the manufacturer's Web site.
  • Make sure that you have installed the device using the appropriate program. If this isn't the case, reinstall the device.

  For a keyboard or a mouse, if you have installed the Bluetooth wireless technology on your computer, use the Add Bluetooth device Wizard. To do this, follow these steps:

  a. connect a wired keyboard or mouse to your computer.

  b. click the Start button, select Control Panel, click hardware and sound and then click Bluetooth devices.

  c. click Add.

  • The unit may be out of range of your computer, or too close. Try to move closer or a little further away from your computer.

  Hope this information helps you.

• I'm unable to connect my smart fone of samsung Galaxy S2 to Windows 7 Professional 64 bit. Please suggest a work around

  Well, I have a problem with my Galaxy S2 with laptop (Windows 7 Professional 64 bit).
  It gives the following error.
  
  "Device driver software was not installed successfully.
  MTP USB device failed"
  When tried to install the driver manually, the detailed error was code 19 error with the registry entry. Yes I tried to delete the registry entry corresponding to the DPW Samsung device, it didn't always work
  
  It worked very well in another Windows 7 machine.

  Please suggest how to minimize this problem.

  NB: My fone running Android Ice Cream Sandwich

  Galaxy S2, comes with Samsung's Kies software.

  Install the Kies software on the software cd you need to have received when you purchased the galaxy s2.

  or download the latest kies from Samsung Web site. (http://www.samsung.com/us/kies/)

  Once installed, open the Kies application and connect your galaxy s2 to the laptop.

• My ZTE open C unable to connect to the wlan with 63-signs-hex key.

  Hello

  my C open from ZTE unable to connect to the wlan with WPA2-PSK and a 63 sign hex key. When I create a 2. ESSID with WPA2-PSK a sentence normal, everything's fine.

  Oliver

  Hi OliverwithZTE,

  I understand that you have connection problems to your network WPA2-PSK.

  Unfortunately, WPA2-PSK is currently not supported on Firefox OS version 1.3. Only WPA-TKIP and WPA2-AES are supported.

  -Ralph

• Unable to connect to the internet with Foxfire. Can do with Internet Exporer

  I've been using Foxfire. After an update I can no longer connect to the internet with Foxfire. IE can connect.

  Firefox is the name. Foxfire is a bio-luminescent fungus.
  
  http://en.Wikipedia.org/wiki/Foxfire _ (bioluminescence)

  See this support article - difficulty of problems connecting to websites after Firefox update

• Satellite A500 - 15 M: unable to connect to the TV with HDMI

  Hello

  I have a Satellite A500 - 15M. I recently tried to connect to my TV so I could watch certain shows online on my Hannspree Xv HD ready TV.
  The HDMI out does any record on the TV - the TV displays a message "not supported" and remains off (as if there is no signal) - display settings on the PC it does not recognize the TV... actually it [Intel Graphics and Media Control Panel] indicates that the TV/monitor settings are not supported.

  But I can connect via the VGA output - although I have to delete the display settings to 1024 x 768 to show on TV. In addition the display on the TV then is mainly pink and red, even if my pc display peak is most often blue. -start of the Toshiba screen displays on the TV, without any problems and one or twice the login screen was displayed too much, but then sometimes it isn't...
  I know that's not the VGA cable as I can connect to the TV with it on netbook advent my wife without any problem.
  Are there drivers, I need to update / download? Or I need to change the settings?
  How can I get my screen on my TV?

  Any help would be greatly appreciated. Thank you

  Hello

  First, you must connect the two machines (laptop and TV via HDMI) when the two devices are turned off. After turn on the TV and the laptop.

  You must choose the HDMI on TV channel and should then use the FN + F5 key combination to switch the video output to the TV.

  If this does not help, try updating the graphics card driver.
  It seems that your laptop supports the Intel graphics chip. Therefore, you can see the Intel page for new drivers.

  Welcome them

• How to connect a Toshiba TL838 with facebook profile?

  How to connect a Toshiba TL838 with facebook profile?
  When I try to connect toshiba generate email with info and links for connect facebook with toshiba accounts places but when I click on the links I see only errors.

  _ * EDIT * _

  * Ok I flashed the QR code with my phone and now is connect :) *.

  Moderators please close thead

  Post edited by: junioreks

  > Ok I have flashed the QR code with my phone and connect now :)

  Thanks for sharing!