Why Whatsapp disappeared on Apple Watch after having installed the 2.1 OS

Similar Questions

• ProBook 6540 b: no NIC after having installed the drivers

  I tried to rebuild my 6540 b and passing by the pilots tried to install the Marvell LAN driver and it installed properly but the LAN card from the list of devices disappear.

  There are several other unknown devices as theres no driver for the list. I tried different versions of drivers and even others, but nothing has worked so far.

  You are the very welcome.

  You need these drivers in the order of the ID you posted.

  ACPI\HPQ0004:

  FTP://ftp.HP.com/pub/SoftPaq/sp64001-64500/sp64144.exe

  PCI\VEN_8086 & DEV_3B64:

  FTP://ftp.HP.com/pub/SoftPaq/sp48001-48500/sp48063.exe

  PCI VEN_1180 x 2:

  FTP://ftp.HP.com/pub/SoftPaq/sp46501-47000/sp46999.exe

• Application does not not after having installed the wrong version

  Hi all...

  I wrote a simple application that sends an e-mail message and tested many times up to now. Never had any problems. I have make changes every time, I generate for BB OS 4.5.0, version 4.6.0 5.0.0 and 6.0.0. Yesterday evening, by mistake, I installed 6.0.0 version of the application on my BB 4.5.0. When I run the application, it gave me an error. I realized the error and uninstalled immediately. But later, even after you have installed the correct version, the application never worked (4.5.0). By clicking on the 'Send' button simply does nothing (it allows to send an e-mail earlier). The same application with the corresponding versions working on my BBs 4.6.0 and 6.0.0 without any problem. The 4.5.0 version works very well with the Simulator.

  Can someone please suggest a way I can get my 4.5.0 version works on the phone again?

  Thank you very much in advance!

  Well... I deleted all the data of the Application on my phone and started from a square. This corrects the problem.

• T440s lost Bluetooth after having installed the latest updated via the Lenovo system update

  Hi everyone, my setup - Windows 8.1, Intel Dual Band Wireless AC 7260 with Bluetooth built-in.

  After the installation of the last packet of Intel's Bluetooth (via the Lenovo system update), I lost Bluetooth constantly.

  -J' I tried to uninstall the update of the driver, nothing has changed.

  -J' tried to restore through Windows Restore Point (I did a fresh restore point before you install these updates,) without success...

  I noticed that:

  -When this happened, the fingerprint reader to are featured strange - there is no if light (with green light) initially, Windows, and Windows was asking me a password instead of the fingerprint.

  -In the Device Manager. Bluetooth category disappeared (I was there before the upgrade - for sure.). but I saw a new unrecognized device whose name ends with something like "(de l'énumération n'a pas pu) '-this could probably be the Bluetooth card."

  -L' tray for Bluetooth icon disappeared.

  -The Bluetooth system option submenu and its devices in the Windows settings disappeared (and it was here before).

  -Looking for Bluetooth in Windows 8.1 returned property (with Win + W hotkey) framework "set up Bluetooth devices" or similar, but when I clicked it, it couldn't access this option - just took me to the main configuration screen.

  I had to do a restore of the system using Linux (thankfully made a full HD image backup of the HDD and SSD using Clonezilla readers - that was the only way to fix this-instead of complete reinstallation of Windows).

  The only driver that works for me is the Intel version 3.1.1307.364 issued on August 1, 2013.

  -Anyone else had similar problems?

  Apart from this, the Bluetooth disconnects always happen: see http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T440s-major-WiFi-and-Bluetooth-instability/...

  Can someone give me some advice please?

  I need help with this.

  I found a solution to this problem.

  Apparently, installing bluetooth driver through update system does not install it properly.

  So I downloaded the latest driver of Lenovo driver download page, and instead run autorun.exe, I sailed to 64-bit dir and then run the installation program.

  Everything works fine now.

• Apple Watch: can I receive all messages from whatsapp on my Apple Watch, but not the Group whatsapp messages, don't know why... Help, please. Besides, my watch is custom in Spanish, but only answer messages Whatsapp understands English... someone kn

  I can receive all messages from whatsapp on my Apple Watch, but not the Group whatsapp messages, don't know why... Help, please.

  Besides, my watch is custom in Spanish, but only answer messages Whatsapp understands English... anyone know why? Thanks to you all!

  Hello

  To change the language for a response on your watch: Press answer > firmly press the screen > press on choose language > select Spanish.

• How can I make a phone call from Apple Watch after the update of the software lasted?

  I don't know how to make a phone call from my Apple Watch after this update. I need help

  Hello

  Under watch OS 3, the friends feature (which was available in previous versions) comes over and there is no direct replacement for it.

  When making calls or sending of new messages, contacts instead can be selected via the phone and Messages applications or using Siri:

  • Messages: https://help.apple.com/watch/#/apd92a90f882
  • Calls: https://help.apple.com/watch/#/apdc38d7a95e

• Apple Watch after upgrade to watch OS 3 - flashing screen after update

  Apple Watch 42 mm

  I recently like millions out there I've updated my Apple Watch to watch OS 3. Today noon 15/09/2016, I noticed that when I raised my hand/wrist to wake up screen Apple Watch it flickered once. I did this action several times to confirm that I clearly understand what was going on. I started to solve the problem, powered off/on power the Apple Watch. Issue continues. I did a reset on the Apple Watch hold the button of the Crown and the power at the same time until the powers of the device and restart. This action eliminates the problem. Apple Watch works as expected, screen flicker stopped when hand/wrist is triggered and screen Apple Watch wakes up to the top. Unfortunately, after some time between 2 and 3 hours of new screen flickering starts. I did some digging online but have not encountered this problem. I realize that the watch OS 3 has only been published days before so I wasn't expecting to fall on part.

  My question: is this a known problem that will be patched with an upcoming release or I'm the first to report this problem? Any information would be much appreciate.

  It is too early to know if it would be regarded as a known issue. This is not the case on my Apple Watch after the update.

  See if a matching and re pairing your watch makes a difference.

  Cancel the twinning of your iPhone - Apple and Apple Watch Support

• Everyone can not open Wechat of the Apple Watch after the last update?

  After the update for Wechat around the end of 2015, I can't open the app to Apple Watch.

  Whenever I tried to open the app, a loading screen came, and then the application leaves itself.

  Someone help please?

  Thank you!

  I already have the Apple Watch combat and reinstalled the Apple Watch. I can always open the app.

  I use a system of 2 OS on my watch and an iPhone iOS 9 5 C.

  If you have not already done so, it may help to update your iPhone and Apple Watch for the latest versions of software.

  Update the software on your iPhone, iPad or iPod touch - Apple Support iOS

  Update the software on your Apple Watch - Apple Support

  If not, try the following steps:

  • On your iPhone, go to: settings > General > storage & use iCloud:
    • In the storage section: press on managing storage > music > Edit (top right corner) > delete all the songs.
  • Back up your iPhone to iCloud (do not reset your iPhone later, just to make the backup):
    • How to back up your device using iCloud or iTunes - Apple Support
  • Also back up (but does not synchronize) your iPhone to iTunes, select the option "Encrypt iPhone backup" (even once, do not reset your iPhone later, just to make the backup):
    • How to back up your device using iCloud or iTunes - Apple Support
  • Then try again to open WeChat.
  • Music can be added to your iPhone again after trying these steps.

• Why my drive showing full after having activated the bitlocker encryption? My d drive is 180 GB. only up to 20GB file is available

  Why my drive showing full after having activated the bitlocker encryption? My d drive is 180 GB. only up to 20GB file is available.

  If you want just a report of chkdsk on your C partition select Start, run, type "cmd" without the quotes in the box and press ENTER. Type chkdsk, and then press the ENTER key and a report, stating, among other things, a summary of how disk space is used, is provided. If you want a report on a partition or one drive other than C, you need to go to this partition. To access F, where F is the required partition you type F: and press the ENTER key.

  Copies of the reports from a command prompt can be tricky. Right click and select mark. This allows to highlight the selected text, and then click on copy. You will then open Word, Notepad or similar file, right click and paste. The selected text transfers your Clipboard to open the file. You can paste directly into a response message to the majority of the forums.

  In Windows 7, you can use a command-line high;
  http://www.SevenForums.com/tutorials/783-elevated-command-prompt.html

• I can not pair my Apple Watch with my iphone 6 s so true the automatic procedure freezes the app on my iphone. If manually matching the 6 digit code will appear on the Apple Watch. I have the current ios 10.0.1

  I can not pair my Apple Watch with my iphone 6 s so true the automatic procedure freezes the app on my iphone. If manually matching the 6 digit code will appear on the Apple Watch. I have the current ios 10.0.1

  does anyone have a solution to this?

  Hello

  The following steps can help (try again after each):

  • On your iPhone, in the application of the watch, go to: Watch My > general > use > software update - remove any file update, if one is displayed.
  • Delete all profiles beta (on your iPhone and/or the watch), then restart both devices (this applies only if you have already participated in a program of Apple Beta software).
  • Restart your iPhone and your watch:
    • Close open applications on your iPhone:
      • Double-click the Home button, and then drag upward on each Preview app to close.
    • Close the two devices together, and then restart your iPhone first.
      • Restart your iPhone, iPad or iPod touch - Apple Support
      • Restart your Apple Watch - Apple Support

• I would like to receive a notification on my Apple Watch and iPhone simultaneously the messages/IM; not one or the other.

  I would like to receive a notification on my Apple Watch and iPhone simultaneously the messages/IM; not one or the other.

  I understand that if my Apple Watch is unlocked (or on my wrist) incoming Message notifications will be displayed on my watch. This allows to bypass the notification on my iPhone for messages.  I would like to find a way for Message notifications to simultaneously alert me on my iPhone and Apple Watch.

  Thoughts?

  Hello

  If you disable the detection of wrist (on your iPhone, in the application of the watch, go to: Watch My > General > wrist detection), it will make all notification alerts to be delivered to both devices. However, you will not be able to benefit from features including screen Wake on wrist lift, Apple pay and one unblock after placing the watch on your wrist.

  If you want Apple to consider adding an option for notification alerts to be delivered for both devices regardless of the other settings, you can suggest here:

  https://www.Apple.com/feedback/watch.html

• Help! My Apple Watch is stuck on the screen of weekly activity

  Hello

  My Apple Watch is stuck on the screen of the weekly activity. I tried setting down, I tried the button dial spinning and nothing. There is no done either button. Do I let my Apple Watch lose all batteries, or is there a way to solve this problem!

  Hello

  There should be a link to the upper left corner of the screen.

  Even if you don't see (after verifying that you have reached the top of the summary page), try to tap into this area to exit Preview.

• How can you cancel the download of an update that was started by after having pressed the button "Check for Updates" in the window "On Firefox", please?

  How can you cancel the download of an update that was started by after having pressed the button "Check for Updates" in the window "On Firefox", please? If possible, please cover all platforms, Mac, Windows, Linux, although the first mentioned is what currently applies to my situation.

  Thank you.

  Such a download is usually recorded in a updates or updates folder in the program folder or the Firefox application.
  You can delete this folder to cancel the download.

  If the files have already been downloaded, then delete the files in the folder updates\0 and updates.

  • http://KB.mozillazine.org/Updates_reported_when_running_newest_version
  • http://KB.mozillazine.org/Software_Update

  Mac: /Applications/Firefox.app/updates "/path_to/Firefox.app/Updated.app"
  Linux: "/path_to/firefox/updated"
  Windows: C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates
  

• I get a message on my watch "Device locked" Unlock iPhone to start using Apple Watch "so I have the odd from my iPhone, now I can't pair it again.

  I get a message on my watch "Device locked" Unlock iPhone to start using Apple Watch "so I have the odd from my iPhone, now I can't pair it again.

  Hello

  Follow these steps to clear your locked watch and re-pair it with your iPhone:

  • Connect your watch to its charging cable - with power connected.
  • Hold down the side button until you see the cursor off the power.
  • Press firmly (IE more firmly than usual) on Power Off and then press erase content and settings.
  • Then re-pair your watch by using the app shows on your iPhone, choose restore backup when the possibility.

  More information:

  Set up your Apple Watch - Apple Support

  If you have forgotten the password for your Apple Watch - Apple Support

• Apple Watch heart rate monitor, the signal can be shared with other devices such as the Garmin Edge 520?

  Apple Watch heart rate monitor, the signal can be shared with other devices such as the Garmin Edge 520?

  Hello

  No, that it is not currently possible.