IVX NAT ON PX12-400R

Similar Questions

• PX12-400R: disk replaced in the pool, no confirmaton status

  Hello

  I had problem where I received this message from PX12-400R

  --

  6 player is at risk of failure and should be replaced. The drive works properly, but can not soon.

  --

  I replaced the 6 drive, but the only thing I see in the event log is

  16:56 svcd, Drive '6' added.

  How can I check the status of my pool?

  Hello mishomor,

  Essentially, if the firmware does not report errors, you should be fine.

  If you wish, you can submit a ticket using the link below and ask an agent to get a dump of your part file.
  https://Lenovo-na-en.custhelp.com/app/ask/

  They will be able to check the health of your disks and see detailed data on your storage pools.

  You can also see the disk of the user interface management page.

  Your storage pools are listed at the bottom of this page and you will be able to see which drives are synchronized with what storage pool.

• NAS to Nas backup for iSCSI volumes

  Hello

  I have a NAS PX12-400r, with some volumes are configured as iSCSI volumes, connected to different servers.

  I would like to find a nas to nas backup solution, in order to back up or synchronize the entire volume to an another NAS PX12-400r.

  I want to do it using only the SAR in a transparent way for servers connected to iSCSI volumes, or one-third of the machine.

  Concerning

  Gabriele

  Hello ecohmedia,

  For NAS to NAS (data) transfers, your only option is running from part to part.

• ISCSI Volume resizing

  I resized the volume, but the connection to a current server and one to test with indicates the volume at the same size in Device Manager. Why 2008 and 2008 R2 servers shows the old size and I don't then expand.

  The device is a PX12-400r with most recent firmware.

  
  

• On IVX on px12-450r

  This is the initial configuration of the VM IVX.

  How to access a virtual machine runs on px12-450r with IVX since windows 7 OS with VNC view?

  Windows 7 Professional x 86 sp1

  IE9

  Viewer VNC 5.0.3

  Download vnc IVX and opened it but it closed immediately.

  It is impossible to open a machine virtual windows view vnc.

  port VNC is the default is 5900

  Pls advice this.

  Support Local, VNC viewer does not work it is a known problem, it seems to use tightvnc.

  http://www.TightVNC.com/download.php

  Solved

• How can I change the base station Airport of NAT mode?

  I'm trying to set up an Airport base station and stuck because I have the following message is displayed, but no idea how do what he asks...

  Status is showing as Double NAT and then asking me to move on to the base station in bridge DHCP/NAT mode.

  But where do I do this?

  Thank you

  It can be difficult to get the router to bridge sometimes... but if all goes well... Click on the airport icon in airport utility and then click on edit.

  

  Go to the network tab and change DHCP and NAT to bridge.

  

  Click Update at the bottom of the page... Then, everything should be good.

  If you are having problems follow these steps.

  Reset factory airport and then do a manual installation. I recommend that you connect with ethernet which is much more reliable, but your MBPr is not the most important network port that exists... Although there is a bolt of lightning at low cost for the ethernet card.

• The settings DHCP Airport extreme & NAT - cannot change default of NAT IPs?

  Hello

  I'm trying to configure Airport extreme, the most convenient to use for our office.

  Our Office IP is 10.255.x.x

  When I'm trying to Setup DHCP and NAT, in NAT options, there is only 10.0.x.x, 172.16.x.x and 192.168.x.x

  How can I get NAT to have 10.255.x.x?

  Without the NAT settings, I can not get this Airport Extreme to assign valid IP addresses and so unnecessary

  Sorry, but Apple will only accept the 10.0.x.x addresses to be assigned by the AirPort Extreme.

• NAT with Snow Leopard issue

  For the poster who will say "Google is your friend", no it is not, or I wouldn't be here.

  I tried for a while now to solve the only problem I have with Snow Leopard Server.

  MySql has fallen lion and, apparently, no one knows how to use postgrl so I installed MySql and plundered with her for a few hours to get this working.  There were various other issues with Lion.  Finally, I went to Yosemite.  Hey Apple, where is the GUI?  Then at el Capitan and finally tried Sierra (no server app at all yet).

  For me, each 'step-up' taking things and running weaker than the last.

  Welcome to Snow Leopard.  I'll stick with it for a while to come.

  The only problem I have with Snow Leopard, it's that when it restarts, the NAT will not start upward.  Other than that, it does a magnificent job to maintain my home network.  I searched high and low for an answer without success.  A few posters who have addressed this problem specifically here never got a response.

  As this seems to be about three years or more, since this question was asked and it seems that some have migrated to the SLS, I was wondering if anyone has found a solution.

  As it is now, as soon as there is a need to reboot, I just disable the NAT service, restart and turn it back on.  In the case of a failure of current (longer than the inverter can maintain) or just a random crash, I have to kill the firewall and NAT then the configuration of the gateway of new service that requires fixing the various omissions and errors and I'm good to go again.

  Any help would be greatly appreciated.

  You have posted in the forum of Snow Leopard Client.  I ask that to move this post.  In the meantime, you can see the various forums about this trick:

  http://discussions.Apple.com/docs/doc-2463

• Garage double NAT & DHCP - bridge Possible issue error

  Help...

  So it's my game on a yacht...

  I have a MacMini (run bootcamp Windows 7 Pro), so actually it's a PC.

  • I use internal WiFi adapter of the MacMini to get my internet connection of various different Marina I could stay in
  • I then share the connection with the internal LAN adapter WiFi adapter WiFi
  • This allows me to share the WiFi port with other devices on the yacht

  Then I have an AirPort Extreme-

  • I then run an Ethernet on the MacMini Port CAT6 cable
  • on port WAN on AirPort Extreme
  • AirPort Extreme now has an internet connection (from the marina, WiFi)
  • I then activated the WiFi on AirPort Extreme to create a WiFi network on the yacht
  • and it gets its internet connection from the WAN port, which comes in turn the MacMini, which in turn comes from the Marina WiFi

  Connected to the AirPort Extreme are-

  -iPhones, iPads, MacBook, Apple TV, Smart TV, etc etc.

  -Some devices are connected using the LAN ports and AirPort Extreme cable

  -Some devices are connected by WiFi using WiFi airports

  I want DHCP to be handled by the AirPort Extreme-, mode I set as "DHCP and NAT".

  What is the problem-

  • AirPort Extreme shows an error
  • "double NAT and DHCP.
  • and suggested I turn it in Bridge mode
  • but I don't want to do that

  Any thoughts?

  Concerning

  Tim

  Would help if we could get the exact message you see.  You will probably need to change the DHCP-range on the AirPort Extreme to a different value, and then use the option 'Ignore' the Double NAT then the airport will show a green light.

  You will have to live with the Double NAT if you want AirPort Extreme to act as a remote router that provides a private network.

• Strange double NAT, although there is only a single router

  My ISP (RCN) changed my modem at a speed greater than one.  Although a router built-in, I told them that I didn't use their router, only my Time Capsule, so they disabled.  However, my Time Capsule kept gives me an error message Double NAT and amber flashing against Green, even though everything seemed to work (wireless and wired) and said that I should switch DHCP and NAT to bridge mode.  Correction of the error, but I do not understand what caused the Double NAT if there is only a single router.  The ISP Technical Support people confirmed their control center is not the router feature on in the new modem, I ask.  They also said that their network supports DHCP, although they have other who use the Bridge Mode, although they do not support.   And they knew nothing about it, he said to ask Apple.  They also offered to switch back, but because this modem is faster at the same price.  (He called a bypass gateway 3-in-1).  Many people online told not to use his router, it's why I unplug it and only use the time Capsule.

  So if someone can give me feedback, I'd appreciate it. I must:

  1. keep running the new modem and my Time Capsule in Bridge Mode.

  2. run the new modem in DHCP mode, as they put in place and do not worry Time Capsule seeing amber / flashing Double NAT error.

  3 swap back to the previous modem, which was 50 Mbps against it with (theoretically) 155 Mbit/s (it's only works in 50-70).

  I'm not really all that, but I hope that one of you maybe.  Thank you!!!

  Although a router built-in, I told them that I didn't use their router, only my Time Capsule, so they disabled.

  ISPS often make the mistake of simply turn off the radio on a modem/router...which service does not disable the router function of the device. You still have a wired router when ISPS are making this mistake.

  However, my Time Capsule kept giving me an error message Double NAT

  This confirms again that the ISP has not disabled the function of the router to your modem/router.  On some modems/routers or gateways, it is not possible to get the device to act as a simple modem.

  The ISP Technical Support people confirmed their control center is not the router feature on in the new modem, I ask.

  The fact remains that you wouldn't see a Double NAT error unless the ISP system acted as a router... Despite what people of PSI say. You may need to get a 2nd or 3rd person-level support, who knows what they are doing.

  1. keep running the new modem and my Time Capsule in Bridge Mode.

  Yes, if you want to avoid the mistake of NAT Double... what you are doing. But, the time Capsule will not be your router.  The device of the ISP will be.

  2. run the new modem in DHCP mode, as they put in place and do not worry Time Capsule seeing amber / flashing Double NAT error.

  This only if you willing to accept the fact that the ISP did not correctly change your gateway to make it work as a simple modem only.  You might be able to get away with a Double NAT error on a simple network, but there is no reason more complicate things with a misconfiguration in unless whether there are a few reasons to do it and it can't be avoided.

  3 swap back to the previous modem, which was 50 Mbps against it with (theoretically) 155 Mbit/s (it's only works in 50-70).

  Your decision if you want to run a simple modem with time Capsule, or accept the fact that the time Capsule won't have your router when it is configured in Bridge Mode, or you see a Double NAT error on the network.

  If it were me, I would go back to what I know will work properly... the simple modem and time Capsule as the router.

• How can I enable UPnP (Universal Plug and Play) or NAT - PMP (NAT Port Mapping Protocol) Protocol?

  I'm trying to set up the screen Edovia and they say that I need to enable UPnP (Universal Plug and Play) or NAT - PMP (NAT Port Mapping Protocol) Protocol.

  How can I do this?

  In Airport utility. The form is in your router.

• Types of NAT and security

  Question: What should I do to get the NAT on my PlayStation 1 type while keeping the type NAT 2 on my other devices?

  Hello! I connected an AirPort Express into my modem. The AirPort Express gives me type NAT 2 on my units, which is good. However, my PlayStation 4 has a lot of problems connecting to games online with this NAT type. I would get the type of NAT 1 on my PlayStation, while keeping type NAT 2 on the rest of my devices for security reasons.

  The two options I can imagine are the following:

  1. Changing the type of PlayStations NAT without compromising the security of other devices is directly connect the PlayStation to the modem with an ethernet cable. Again, I would not a cable through half of my house, and so I would like to know if there are other options.
  2. Buy a new separate router and have two totally airtight networks, then use port forwarding to get NAT type 1 on one of the routers.

  Change the NAT type to open (1) for all devices is not an option, because it will change the security settings.

  Please see the following Tip of an airport users for more details on the types of NAT for PS 3/4 consoles with AirPort base stations.

• Time Warner failure: replace BRIDGE MODE DHCP/NAT!

  If I woke up this morning to find that my Time Warner Cable internet has exploded the line last night. According to my AirPort Utility application, my Airport was functioning normally, but it was not connected to the Internet. So I restarted the thought of the airport that could solve. Not only it does not solve my problem, it made it worse:

  Now, he pointed out that the AirPort base station has a private IP address and suggest that change my Airport to use DHCP and NAT mode.

  Now keep in mind, it has been working perfectly for months with the current settings. Suddenly, he must be in Bridge mode after reboot it?

  I had to leave for work so I didn't have the time to reset the modem from Time Warner Cable. However, I suppose that I should not change the settings on my AirPort at the moment since it worked perfectly before?

  I have the current model AirPort Extreme and configured automatically, after several attempts of frustrating with the same modem from Time Warner Cable, which I am currently using, of course it takes hours to acquire a signal of Time Warner Cable.  It has been working perfectly since.

  This should resolve on its own once the cable connection is restored, or is it that this means that I have to completely reset my AirPort Extreme and implemented from scratch with the cable modem I did originally?

  It would help us if you could provide the serial number and model of your modem.

  IF... the modem normally gives you a public IP... so the parameter DHCP and NAT on the most convenient airport would be correct.

  IF... the modem... which normally provides a public IP address was not reset, then it could actually send a 'private' IP address... probably something in the 192.168.x.x range... that is not correct.

  Turning off the modem by pulling on the power cord to the back of the unit

  Unplug the co - ax cable and Ethernet cable

  Let off for at least 30 minutes the modem... 60 would be better.

  Turning off AirPort Extreme as well

  After turn off modem, reconnect things

  Start the modem and let it run for at least 10 minutes by itself

  Then, turn on the AirPort Extreme.

• last update of the firmware does not accept the px12-400

  the px12 throws an error when trying to install the latest firmware update and I can't understand why--or even the steps to understand.

  Hello skypuppy,

  Please try using another browser to apply the update.

  If this doesn't resolve the problem, try uninstalling SecureMind and re-download the firmware.

• PX12-350r/PX12-3-450r trays - where to buy?

  Hello

  We have a rackstorage px12-350r and I would like to improve the speed of storage by adding over multiple disks. I struggle to find the trays and let me know where I can still buy compatible trays. The storage must still be used for at least a year.

  Can someone tell me where to get them in Europe or even more?

  Thank you

  Hello Isaakm,

  For something like this, you will need to contact your local support:
  https://Lenovo-EU-en.custhelp.com/app/answers/detail/A_ID/14722