CD/DVD stop working

Similar Questions

• HP 15-do51ea: Power DVD stopped working

  I used to watch the DVD movie on my laptop. I had problems with the help of Internet Explore. I reinstalled windows 10. DVD movie has stopped working since then. What should I do?

  Thanks it works.

• DVD stopped working got external dvd but no not disks work runs for a few seconds then stops

  has had to put the new hard drive in the computer. When I got back that DVD has worked for a while then stopped. Downloaded the software and drivers to try to fix the problem, but no luck. I tried an external but computer dvd for some reason any will not recognize the unit. I also have a legacy of clickfree backup, but now that my dvd works not the clickfree will not work. I have also reinstalled the dvd but that did not work. any ideas?

  Hello

  ·         What operating system do you use?

  Follow these methods and check if that helps.

  Method 1:

  Run this Microsoft fixit t tool and check if it helps.

   

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems

  Method 2:

  I suggest you follow the troubleshooting steps form the article and check if it helps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060

• Acer aspire e1-572 cd/dvd stopped working

  The CD/DVD drive has stopped working. When you insert a disc, normal sounds, but can here a slight ticking, then disk stops not recognized by Windows Explorer. He has worked in the past as the installed disk drivers for the new printer about 6 months ago.

  Any ideas please?

  mjmuk,

  You can contact Acer technical support in your area to see what options are available to you, which probably is to buy a new.

• CD/DVD stopped working

  CD/DVD equipment stopped working. I tried once to make it back by associating with RealPlayer and he played only once, but he then returned to do not work, either video or audio.

  Please see the above headline. It has all the details I have to offer (for now).

  Hello davidtrans,

  ·         Do you remember making the last changes made to the computer (software or hardware) before the CD/DVD drive no longer works?

  ·         How do you associate the CD/DVD player for Real Player?

  I suggest that you run by following the below Fix - it. This will automatically diagnose and repair problems with your CD or DVD drive when trying to read or burn media:
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Creating Windows DVD stops working

  I rely heavily on Microsoft DVD Maker, as I created it and burned more than 300 DVDs.  Only until sometime last week (29 March - 3 April) an automatic update from Microsoft has prompted the download and installation and is the SP2.  After downloading, it prompted a message before installing indicating "little of your programs will stop working."  He never said what program and I don't think criticism main programs closing, installation, I continued.  And, since my Windows DVD Maker is unusable.

  Yesterday, I restored my computer to standard manufactured.  During the installation of the Microsoft Vista operating system, without choice, I had to install with course Microsoft Updates, including service pack #2.  Needless to say that the problem still exists.  Apparently, Microsoft needs to release a patch for this problem as a result of its updates.

  I rely heavily on Microsoft DVD Maker, as I created it and burned more than 300 DVDs.  Only until sometime last week (29 March - 3 April) an automatic update from Microsoft has prompted the download and installation and is the SP2.  After downloading, it prompted a message before installing indicating "little of your programs will stop working."  He never said what program and I don't think criticism main programs closing, installation, I continued.  And, since my Windows DVD Maker is unusable.

  Yesterday, I restored my computer to standard manufactured.  During the installation of the Microsoft Vista operating system, without choice, I had to install with course Microsoft Updates, including service pack #2.  Needless to say that the problem still exists.  Apparently, Microsoft needs to release a patch for this problem as a result of its updates.

  =================================
  Just a guess really... but you might have a problem with
  your video driver...

  If you reduce the graphic hardware acceleration as
  According to the instructions in the following article... you can
  See an improvement.

  If... Yes, you need to update your video driver.
  (improvement or not... do not forget to return the)
  acceleration to full after the experience)

  * Proceed at your own risk *.

  How to put in back of graphics hardware acceleration
  http://www.pptfaq.com/FAQ00129.htm
  (scroll down to: "If you use Windows Vista")

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• My CD/DVD stopped working Optiarc DVD RW AD-SCSI 75805

  When I bought my laptop, he worked all of a sudden it does not read the DVD.  It runs like it is reading then it make workstation go no answer.  I tried Devil driver and reinstall it and it didn't work.  Now all of a sudden my computer without warning, it will just turn off.

  I don't know if the two have something in common, but I am ready to throw my laptop out the window...

  HELP PLEASE

  Hello

  Step 1: Please make all underneath the same if you've done it before as it's often the total of the process which
  solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
  that the troubleshooter does not, and those who "could" be the cause.

  Check with your system manufacturer Maker and device for possible firmware updates and the good
  Your player registry entries.

  Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
  other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even registry settings correct for your CD/DVD drive
  a person with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• drive CD/dvd stopped working after it by unplugging / plugging.

  Hello. I use XP Pro and Lite-on DVDRW SHW-160P6S.

  Recently, I unplugged to check another old drive I had and when I plugged in my Lite-On back inside, suddenly no longer works.

  Device Manager will not display any errors. Uninstall and restart did nothing. Mr. Fix It says it found and corrected a few errors, but there is still a problem, he has been unable to solve.

  I even reinstalled windows to see if that would help!

  Cables are connected correctly. Everything is permissible and in working order and still he will not recognize all I put in the media.

  Help?

  Please repost your question in the Forums XP: http://social.answers.microsoft.com/Forums/en-US/category/windowsxp where XP experts will help you.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Equium A210 - after that set BIOS to update the DVD player has stopped working

  Hi, since I have recently updated my BIOS, my DVD drive has stopped working on my Equium A210-1AS with Vista 32 bit.

  I tried the program fixme Microsoft who does not work, upper and lower register isn't here ether in regedit.
  Someone at - it solutions for getting the DVD drive working again?

  Thank you

  Hello!

  The CD/DVD drive is listed in Device Manager? You see an error code?
  If the drive is listed in Device Manager, you should try to remove it, and then restart the laptop.

  Try to load the default settings in the BIOS.

  Have you tried to remove the upper and lower filters by yourself? Here is the solution from Microsoft:
  http://support.Microsoft.com/kb/314060

  Good bye

• Satellite L300 - DVD Toshiba drive stopped working

  I have the Satellite L300 and Vista Home Premium installed.

  When I try to open the DVD player, it is said: "Toshiba DVD has stopped working. Try to find the solution for this program. »

  It was working before. I watched 3 movies on it and then simply collapsed without known reason.

  Do not want to reinstall if not necessary.

  Hello

  > Don't want to reinstall if not necessary.
  I m not very well why the software doesn't work anymore, but I think that it s advisable to reinstall.
  You must first remove the old software (reader Toshiba).
  Then you need to download the most recent version of the page of the European driver Toshiba DVD player and needs to be reinstalled it.

  Check it out!

• E DVD drive has stopped working on my Satellite L755D

  Earlier today the DVD player worked but stopped suddenly, on my Satellite L755D.

  Looks like he is reading the disc, but can't find anything. It is not the real disk as it works on another computer.

  Any ideas?
  Thank you
  Ian

  Have you tested the feature with drives different (original CD, DVD)?

• Equium A300D - ODD stopped working and do not read cd/DVD

  My CD/DVD drive has stopped working yesterday and does not read disks. It appears in the form E drive in my computer. When I click on it, it is open to insert a CD-ROM but it still ejects so an error message "Microsoft Windows: an error has occurred in eject DVD RW drive E'"
  I uninstalled the driver and reinstalled it but nothing has changed! What does all this mean?
  Thank you

  Hello

  First remove the drive CD/DVD from the list of Device Manager.
  Then start the registry (regedit) and remove the upper and lower key filters:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  You will find here more details:
  http://support.Microsoft.com/kb/270008/en-us

  Good luck

• Qosmio G30 - DVD-ROM drive has stopped working

  I have a Qosmio G30 age of 3 years and the DVD - ROM drive has stopped working.

  He still pulls in, but it will not read or burn discs.

  I received a quote of £360 Toshiba to adapt to a new one that seems generous.

  Anyone know where I could get it fixed cheaper than you?
  Or better yet... anyone know where I can I get it fixed?

  David Hutchinson

  Hello
  This is not an answer to your question but can solve the problem if it is the same that I had.
  In my case, the drive tries to spin but it slips. Only the motor shaft rotates and the drive remains at low revolutions that were not even stationary.
  The problem was caused by the fact that the plastic part (black color) of the mechanism which engages the disc (CD or DVD) slips on the
  motor drive, axle and th couldn't do a full rotation or runs at the specified speed.
  The solution is to delete the article in plastic and put a small amount of super glue on the axle and then put it back.

  Where there is a similar issue, I hope that solve you it like I did.

• Cannot use DVD BD Player: WIN DVD MFC application has stopped working

  Tried to install my old version of WinDVD and failed and in the process perhaps accidentally deleted a file,
  now every time I try and use DVD BD drive I get the following message:

  "WIN DVD MFC application has stopped working"

  I tried to use restore point, but still get it, can anyone advise please?

  It will be interesting to know what model of laptop you have.
  Anyway, in my opinion, there is a software conflict. I guess players use even modules or plug-ins, and there is a conflict.

  I put t know what solution can be, but maybe you should remove both players, restart your laptop and make own BD drive in the hope that it will work properly.

• Satellite P300-156: CD/DVD player has stopped working

  Hi people,

  I have a P300-156 and since I bought it, I had a problem with the DVD recorder... ok I know I should take that back!

  Sometimes when I press the eject button, that nothing is happening outside the orange light flashes and continues to blink. When this happens that I lose the drive in my computer and the only way to make it work again is to restart the laptop.

  Usually, it works when I reboot then stops working, but it doesn't also sometimes from the restart.

  Someone at - it ideas.

  Thank you

  Dan

  Hello!

  Have you looked on the Toshiba site for an update of the firmware? Search on the Toshiba site for an update, maybe this will solve your problem.
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  However, I think it could also be a hardware problem that your drive is defective. Then I'd go to a local ASP. A technician can check your laptop.

  Good bye