IWA with Oracle Access Manager.

Similar Questions

• Components required for Oracle Access Manager

  To replace our current SSO solution, we were asked to migrate to Oracle Access Manager.
  
  In order to install Oracle Access Manager, there are some dependencies from a point of view RCU.
  
  I'm trying to find out if Oracle Identity Manager must be installed with Oracle Access Manager - so that the OAM correctly configured?
  
  Thank you

  That's true when Oracle Identity Manager is a required precondition for Oracle Access Manager and, therefore, the need for the Oracle Identity Manager schema must be installed both in time of creating repository?

  Yes.

  Thank you
  Hussein

• Customizing operations Oracle Access Manager error page.

  Hello

  If someone let me know if we can customize the below page "Oracle Access Manager operations Error"?

  --

  Operation Oracle Access Manager error

  The plugin WebGate is unable to communicate with servers of access.

  Contact your site administrator to address this issue

  ---

  Thanks in advance,

  PS

  Hello

  You can change the webgate.xml to achieve this. For more information, visit our 555137.1 .

  Kind regards

  Colin

• management of the PDBs with Oracle Enterprise Manager Express

  Hello

  is 12 c, possible to manage the PDBs with Oracle Enterprise Manager Express?

  How to find the URL?

  When I run select dbms_xdb_config.gethttpsport (double); on a PDB file, it returns no rows.

  More tutorials

  https://Apex.Oracle.com/pls/Apex/f?p=44785:24:4833387311898:P24_CONTENT_ID, P24_PREV_PAGE:6282, 24

  I have not seen.

  Thank you.

  is 12 c, possible to manage the PDBs with Oracle Enterprise Manager Express?

  Yes - but you will not have the COMPLETE management functionality. See the FAQ doc:

  http://www.Oracle.com/technetwork/database/manageability/emx-CDB-1965987.html

  Can I Plug and unplug the PDBs with EM Express?

  No, EM Express does not all CBD management capabilities in DB 12.1.0.1.0.

  Review ALL sections of doc

  How to find the URL?

  When I run select dbms_xdb_config.gethttpsport (double); on a PDB file, it returns no rows.

  Have you set up EM and set the port to the PDB? Again - see the FAQ doc

  http://www.Oracle.com/technetwork/database/manageability/emx-intro-1965965.html#A5

  How can I configure EM Express on CBD and APB?

  Users can configure EM Express at the root and container of the PDB, with each container using another HTTP/HTTPS port.  When it is connected to the root container, the information displayed are the entire database, including all PDB files.  When it is connected to a PDB file, displayed information is limited to the PDB data.  For more information, see the section on EM Express on the CBD.

  http://www.Oracle.com/technetwork/database/manageability/emx-intro-1965965.html

• WebGate Oracle Access Manager

  Hi all
  
  I kinda confutation on Oracle Access Manager webgate. Please help me to understand.
  
  There are five web server, I need protected using OAM. Three are IIS 6.0/7.0 in Wondows 2008, Apache v2 in RHEL 5 and the other Apache Tomcat in Cent OS 5. All the BONES are the 64-bit platform.
  
  I need to know what webgate I download and install IIS and Apache? Please give me the download link.
  
  I saw after the documentation, but I'm unable to find Oracle_Access_Manager10_1_4_3_0_Win64_ISAPI_Webgate.exe or Oracle_Access_Manager10_1_4_3_0_platform_OHS_Webgate
  
  http://docs.Oracle.com/CD/E28271_01/ doc.1111 /e15478/apch2ihs.htm
  http://docs.Oracle.com/CD/E21764_01/ doc.1111 /e15478/iis_wg.htm
  
  Thank you
  
  Tamim Khan

  Hi Tamim khan,

  Download it from the following link:

  http://www.Oracle.com/technetwork/middleware/IAS/downloads/101401-099957.html

  Manager access Oracle 10 g - no Webgates of OHS11g and 3rd party integrations: Windows x 86 disk 2 (oam_int_win_v11_cd1.zip)

  who has both:
  Oracle_Access_Manager10_1_4_2_5_Win32_ISAPI_WebGate.exe and
  Oracle_Access_Manager10_1_4_2_5_Win64_ISAPI_WebGate.exe

  Kind regards
  Combet

• WebPass Oracle Access Manager 10.1.4.0.1

  Hello
  
  Where can I download Oracle Access Manager WebPass for Sparc machine. I downloaded the whole package Access Manager when I unpack I found the file webpass following;
  
  Oracle_Access_Manager10_1_4_0_1_sparc-s2_ _WebPassNSAPI
  
  During the installtion of the above file requires an absolute path to the file instead of the httpd.conf file obj.conf. I think I need following file
  
  Oracle_Access_Manager10_1_4_0_1_sparc-s2_OHS2_WebPass
  
  Where can I find the installation file above?
  
  Note: I have downloaed the OHS server from following link that I couldn't find any connection to the 10g version of OSH and the example given on the Oracle Web site uses OHS 2.x to identity manager and following the requirements met.
  
  http://www.Oracle.com/technology/software/products/middleware/htdocs/111110_fmw.html
  
  Page instructions Oracle install Identity Manager-> http://www.oracle.com/technology/obe/fusion_middleware/im1014/ovd-oam/oam-ovd/install_oam/install_oam.htm
  
  Help, please.

  Hi Sophie,.

  WebPass OHS2 is located in the file oam_int_solaris_v2_cd2.zip which can be downloaded here:

  http://www.Oracle.com/technology/software/products/IAS/htdocs/101401.html

  Click on the link of CD3 in party integration line 3rd in the column of Solaris.

  Kind regards
  Colin

• Oracle access manager SSO

  Hi all
  
  I want to use 10.1.4.0.1 oracle Access Manager to protect a web application, I installed and configured the directory that contains the users, my question is: can I install Oracle AS SSO, or Oracle Enterprise Single sign-on suite to allow sisngle sign my application or Access Manager contains the single sign on?

  Hello

  It seems that you have not installed or configured the OAM WebGate.

  -Vinod

• Adaptive Oracle Access Manager

  Hello
  
  Does anyone have experience with the Adaptive Access Manager product, specifically using the Tomcat 5.5 application server +? Just trying to make it work with Tomcat and having not much of chance. I get an error message:
  
  Exception [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.1.0) (Build 061004)): oracle.toplink.exceptions.DatabaseException
  Inner exception: java.sql.SQLException: no suitable driverError Code: 0
  
  Using MS SQL Server 2005 as the dB. The sqljdbc.jar to Microsoft has been placed at the location appropriate (according to the documentation), but judging by the error, the application can't seem to find it. Any who are having problems getting Tomcat to work with OAAM?
  
  Thank you

  Hello

  Check your connection url in the session.xml. It should be in the following format;

  SqlServer: / / {host}-{name of database engine}; databaseName = {user name}; SendStringParametersAsUnicode = false;

  In addition, make sure that there is no empty space left by mistake in the connection url.

  Thank you.

• Debugging in Oracle Access Manager policy

  So, I've got OAM 11 GR 2 installed and I have configured an authorization policy that doesn't seem to work.  I'm trying to understand how to enable debugging for the policy logs so that when I try to access the resource, I can troubleshoot using logs.

  So far, I have done this:

  CD $MW_HOME/Oracle_IDM1/common/bin

  ./WLST.sh

  Connect ("weblogic', ' password ',' t3: / / localhost:7001'");

  listLoggers(pattern='oracle.oam.*',target='oam_server1');

  setLogLevel(logger='oracle.oam',level='TRACE:32',persist='0',target='oam_server1');

  I know that the log is enabled because of the following:

  ------------------------------------------+-----------------

  Logger                                    | Level

  ------------------------------------------+-----------------

  Oracle.OAM | TRACK: 32

  Oracle.OAM.admin.Foundation.Configuration | < inherited >

  I restarted the oam_sever1 of my Weblogic console.  I'm settling the journal of oam_server1.out, but when I try to access the protected resource, nothing appears in the journal of oam_server1.out.  Issues related to the:

  Have I set up the connection properly?

  I'm looking at the correct journal?

  How to debug policy?

  Thank you

  --

  Mohammed

  Found!

  oam_server1 - diagnostic.log will display all debug information.

  So, to answer my own questions:

  Have I set up the connection properly?

  Yes, and to turn off logging, run the following command:

  listLoggers(pattern='oracle.oam.*',target='oam_server1');

  You can verify that the logging level is back to normal with this command:

  listLoggers(pattern='oracle.oam.*',target='oam_server1');

  ------------------------------------------+-----------------

  Logger                                    | Level

  ------------------------------------------+-----------------

  Oracle.OAM | NOTIFICATION: 1

  Oracle.OAM.admin.Foundation.Configuration |

  Oracle.OAM.admin.service.config |

  I'm looking at the correct journal?

  Yes, oam_server1 - diagnostic.log display of debugging information

  How to debug policy?

  Set the debug level to an appropriate value, the newspaper of the tail and perform an action such access a web resource.  The newspaper will then display debug information that should allow you to see how OAM is implement your strategy.

  --

  Mohammed

• Problem running scripts with Oracle Test Manager (MTM)

  Hi all!
  
  I am facing a problem to run any test in OTM.
  I'm adding scripts that I created in OpenScript (and which take place in perfect inside) but running in Test Manager fails.
  To be more precise, I even created a very simple script for the case in which I open the browser, navigate to an existing page (for example www.fmstocks.com/fmstocks - like documentation for example) and then I close the browser.
  What is happening is that the test fails after a few seconds. In the report results, summary of Script, it there a failure result to give Total iteration:
  
  + Object "/ web:window[@index='0" [or @title =' subject: empty '] "+."
  + did not action: +.
  + < name of message = "Navigate" > < parameter WindowIndex = '0' > +.
  + < / parameter > +.
  + < parameter Url = "http://www.fmstocks.com/fmstocks" > +.
  + < / parameter > < / Message > +.
  
  This is the same result that I get in any script I run (with different Url of course).
  I tried to alternate some settings in the Manager (Tools-> system) systems and change my OTM server, I've seen in a thread. I found that if I write as a user name and password to my windows or my OTM username and password (instead of JMSAdmin I see is the default user name) when I run the test simply never stops!
  To be clear, I just started using OATS. All the foregoing is done with the default settings after installation. OpenScript works fine but I need OTM so that I can perform several set of test scripts.
  
  Any help is appreciated!

  Hello
  You must first set back the remote system OTM to JMSAdmin / the_pwd_you_supplied_during_installation
  Then, you must stop the Windows Service called "Oracle Application Testing Suite Agent Service" and put it in the manual.
  Then, you start the agent from the command line
  C:\OracleATS\agentmanager\bin\AgentManagerService.exe - c C:\OracleATS\agentmanager\bin\AgentManagerService.conf (something like that according to the installation path).

  Let us know if it is ok then.

  JB

• Global Logout in Oracle Access Manager

  Hi all
  
  I have a requiremnet whre I must apply SSO for 2 applications using OAM
  the scenario is similar to:
  Protected URL: landing page, url, url app2, app1, (each with Logout button)
  
  Once the user tries to access the destination page, it will be asked for forms based authentication. Once successful, it is shown that launch with app1 and app2 URLS listed page.
  So now once the user clicks on any of these 2 URLS, should not ask a new authentication.
  
  The situation is that these 2 URLs must open in a new browser window, (the child window). What is happening properly. want to achieve overall logout as well, so the question is:
  Once the user clicks on the child window on logout button, will it be disconnected from parent window so or vice versa, if it disconnects from the parent window, if it is disconnected from the child window as well?
  
  According to my understanding, OAM only deletes the cookies at the level of bowser, then how the global logoff works with several browser windows. O use OAM 10.1.4.3 and browsers IE 6, 7, 8.
  
  Any suggestions would be helpful.
  Thank you

  Hello

  With IE, when different browser sessions are open with parent/child behavior (the equivalent to file/new window in the browser) then the sessions share cookies. In this case logging to OAM into a browser will give you a valid cookie for all sessions (parent/child), and a disconnection in a single session journalisera you on the other sessions too (the ObSSOCookie will expire in all sessions).

  On the other hand, if IE sessions are open separate processes (equivalent to double click on the IE icon for each session) then the sessions do not share cookies, the OAM authentication will be required in each session and logout in one session does not affect the other.

  Above is the behavior by default for Internet Explorer - you can see that when the Windows system is stressed, behavioural changes, and I have not tested with very recent versions of IE/Windows (for example 2008) although according to me, that he has not changed in this respect. In older versions of IE (4?) it's configurable behavior.

  Kind regards
  Colin

• Problems with oracle enterprise Manager manager

  Hello
  
  Hello
  
  I have a database with SID mdok and host: mdok.lubelskie.pl. I copied the database to a different server host: oracle.lubelskie.pl with the same SID mdok
  
  I had problems with EM starting on oracle.lubelskie.pl so I run the emca - dbcontrol db config command and entered the correct values.
  
  Now EM starts ok and when I go to http://oracle.lubelskie.pl:1158 / em it asks for the connection. I enter the connection information and connect to the mdok database.
  
  Here's the info to state when I get http://oracle.lubelskie.pl:1158 / em:
  
  Status of
  Upward since 11-03 - 2010 20:59:27 THIS
  Instance name mdok
  Version 10.2.0.1.0
  Home mdok.lubelskie.pl
  LISTENER_mdok.Lubelskie.pl listener
  
  The problem, that of why he connects to the host mdok.lubelskie.pl and not in the good pair hence the EM a was started (oracle.lubelskie.pl). How to solve the problem?

  The best would be to recreate the repository. There are files in which this info is maintained but better would be to delete and re-create the repoistory em using the

  emca -deconfig dbcontrol db -repos drop
  emca -config dbcontrol db -repos create
  

  HTH
  Aman...

• I have a problem with Oracle Enterprise Manager

  After the installation of Oracle 10 g
  I joined the user administrator of windows to policy 'connect as a batch' FRO the local windows policy. Then, it worked for a few days.
  now it does not work then what I will do to make it work

  user: administrator (windows)

  The administrator is a user OS, NOT a database user. When you connect to the database through EM, you need a valid database user.

  Werner

• Example to use the query string in the Oracle Access Manager policy.

  Hi all
  
  Can is there any one please tell me what is the value of the query string and Query String Variable OAM political?
  
  If possible, please explain with an example of the sample.
  
  Thanks in advance.
  
  Siva NAKI.

  Let's say I have an application that has logout URL as http://abc.com/app.cgi?function=logout&user=LOGGED_USER.
  In this case, logged in user will always be different, but you want the user to sign out when this URL is hit. In this scenario, you can use query string variables and specify the function = disconnect it.

  In other scenarios where you know all the query parameters and you want to protect these URLs then the query string can be used.

  Thank you
  Kiran Thakkar

• OAM &amp; IWA with Firefox

  Continue to the post, IWA with Oracle Access Manager.
  
  IWA works fine with IE but not with Firefox. IWA works with firefox? If so, what needs to be configured in Firefox similar to the steps in Internet Explorer.
  
  Thank you

  Yes. Firefox supports the IWA. There are many items available in Google. One of them is below:

  http://markmonica.com/2007/11/20/Firefox-and-integrated-Windows-authentication/

  You can try this.

  Thank you
  GK