Jar for oracle.lite.provider.Authenitcator

Similar Questions

• 12.1.0.2 managed Oracle data provider running significantly worse than classic ODP on Connection.Open (3 sec vs 0.2 seconds)

  Oracle managed provider has many advantages over the traditional Oracle for .net data provider.

  However, our test shows who take connection.open 3 seconds, where the classic ODP takes 0.2 seonds. Opens later against the same connection string perform the same way for the two (0.1 seconds). Subsequest opens against a new connectionstring (another basic data) take 2 seconds for the managed provider and 0.1 second for classic.

  This is not acceptable in some cases, but may be supported in others.

  Someone at - it seems a similar behavior? Any suggestions that may improve the performance of connection.open?

  Regards Niels Jespersen

  A bug (20419677) was created to follow up on this matter.

  The problem seems to arise when the EZCONNECT and WORLD settings in sqlnet.ora and tnsnames.ora files. If either one is removed, the slowdown goes away. This can be used as a temporary workaround while a permanent solution is being developed.

• How to define JDBC Data Sources in Oracle MapViewer for Oracle database 12 c Release 1 (12.1.0.1)

  How to define JDBC Data Sources in Oracle MapViewer for Oracle database Release 1 (12.1.0.1) 12 c?

  Here is my setup in the conf\mapViewerConfig.xml:

  
  

  < name map_data_source = "mvdemo12".

  jdbc_host = "127.0.0.1".

  jdbc_sid = "orcl12c1".

  jdbc_port = '1522 '.

  jdbc_user = "mvdemo".

  jdbc_password = "7OVl2rJ + hOYxG5T3vKJQb + hW4NPgy9EN.

  jdbc_mode = 'thin '.

  number_of_mappers = '3 '.

  allow_jdbc_theme_based_foi = 'true '.

  Editable = "true" / >

  <!--  ****  -->

  But it does not work.

  After use "sqlplus mvdemo / [email protected]:1522 / pdborcl", it connected to the Oracle 12 c database.

  Anyone know it?

  Thank you

  11.1.1.7.1 use the jdbc_sid syntax, i.e.

  as described in the README file, mypdb1.foo.com

  -Sources of native data (no container) MapViewer can now use the service name of database instead of SID. To provide a db service name, you will use the same attribute of jdbc_sid, but specify the name of the service with double slashes in front, as follows:

  jdbc_host = "foo.com"

  jdbc_sid="//mypdb1.foo.com".

  jdbc_port = '1522 '.

  ... ...

  />

  Use a container_ds to the 11.1.1.7.0.

  that is, instead of using

  jdbc_host = "mydbinstance".

  jdbc_sid = "pdborcl12c".

  jdbc_port = '1522 '.

  jdbc_user = "mytestuser".

  jdbc_password = "m2E7T48U3LfRjKwR0YFETQcjNb4gCMLG8/X0KWjO00Q ="

  jdbc_mode = 'thin '.

  number_of_mappers = "6".

  allow_jdbc_theme_based_foi = "false".

  Editable = "false".

  />

  use

  container_ds = "jdbc/db12c.

  number_of_mappers = "6".

  allow_jdbc_theme_based_foi = "false".

  Editable = "false".

  />

  In my case the Glassfish 3.1.2.2 JDBC connection pool definition has been

  Property

  URL jdbc:oracle:thin:@mydbinstance:1522/pdborcl12c.rest_of.service.name

  Uncheck the wrap JDBC objects in advanced Panel, that is, the page properties change JDBC connection advanced pool.

  Add a resource to that newly created JDBC pool

  Use in mapviewerconfig.xml as above

• Toad for Oracle 10.5 patterns

  Hello
  I'm using Toad for Oracle 10.5 and I don't have admin rights to any schema browser. I have a few questions about the copy of a diagram to another diagram. I DEV (development) and environments of TST (test) of tables, triggers, packages, etc. are created and manipulated. In addition, I don't know if this is the right forum for this question, but if not please direct me in the right direction. If there are no links, son, etc. who can help me please provide for me so I can review. Is there a way to Toad for Oracle copy a DEV scheme to another scheme TST? Are there measures that can achieve this, or does an Admin process. I'm trying to implement this on my own rather than send the job to administrators in my Department. Thanks for reading and taking the time to help me with this.

  I think you can exp. IMP, in any case you are planning / decided to try it for yourself, which can dare to stop you from that... :))

  http://toadfororacle.com/thread.jspa?threadID=27012

• Supported web browsers for Oracle Webcenter 11.1.1.5.0 (PS4)

  Hello
  
  I want to know the web browsers supported for Oracle Webcenter 11.1.1.5.0 (PS4).
  
  Please provide me with the document supported, as appropriate.
  
  Thanks in advance.
  
  Kind regards
  Somnath

  See the matrix certification here: http://www.oracle.com/technetwork/middleware/downloads/fmw-11gr1certmatrix.xls

• Stylesheet XSL for Oracle Forms necessary

  Hello
  In the past, I used a xsl stylesheet to generate documentation of converted xml forms.
  
  This utility has been appointed Oracle Forms XML Explorer and recorded by Oranails (http://www.geocities.com/oranails/forms/forms_xsl.htm)
  
  Description: Oracle Forms XML Explorer is an Oracle's XSL Transformer documented forms XML format in Forms Builder - as HTML representation that can be published, stored and read in the browser. No need to install Oracle Developer. As in Forms Builder, you can navigate between Forms objects in the object Navigator and explore the syntax and the properties of the object that is highlighted in the pl/sql source codes by using the property Palette.
  
  
  Unfortunately the site is no longer available. I found a snapshot, but the download link does not work of course.
  
  Can someone help me and provide a link to this xsl tool when it exist?
  Any help will be appreciated
  
  Concerning
  Jean-Yves

  I have the same need and found this post...

  No promises, but I continued a few geocities which lead me to websites of archives:

  OraNails - solutions for Oracle database & tools, examples, tips, links

  which eventually lead me to:

  http://www.ingonord.com/oranails/download.php?d=forms&f=forms_xsl.zip

  Hope this helps someone someday :-)

  Russ

• Oracle lite Java command to delete a device

  I want to know if there is a java method to drop a device repository Oracle lite. I don't find in the java doc. If this method does not exist, perhaps I could remove device in the repository tables? Is that someone did this before?
  
  Thank you
  Simon

  is this what you need?

  http://download.Oracle.com/docs/CD/E12095_01/doc.10303/e12090/oracledb.htm#BCGGBGGC
  3.1 removal of a Client device

  If you want to remove a device, use the device class delete method. To retrieve the device object, use the getDeviceByName or getDevice, as shown below.

  If the device id is available, the following can be used:

  If (oracle.lite.resource.ResourceManager.getInstance () is nothing)
  oracle.lite.resource.ResourceManager.initialize (JDBC_URL, USER, PASSWORD);

  oracle.lite.resource.Device = d
  oracle.lite.resource.ResourceManager.getInstance () .getDevice (deviceId);

  d.Delete ();

  If the device id is not available, you can provide the name of the device, which is shown on the Mobile Manager UI in the oracle.lite.resource.User.getDeviceByName (deviceName) method. Once retrieved, use the method delete of the device object as shown above.

• Caused by: java.lang.NoClassDefFoundError: oracle/portal/provider/v2/rendering

  Hi people,
  
  
  I published a portlet in WLS_Portlet managed server, but when I open the portlet in my application, I get:
  
  Caused by: java.lang.NoClassDefFoundError: oracle/portal/provider/v2/rendering/PortletRenderRequest
  at br.com.it7.portal.portlet.Conteudo.doDispatch(Conteudo.java:52)
  at javax.portlet.GenericPortlet.render(GenericPortlet.java:163)
  at oracle.portlet.server.containerimpl.ServerImpl.doRuntimeCall(ServerImpl.java:1316)
  ... more than 44
  
  My question is, the WLS is not this PortletRenderRequest class? There is a deployment that I need to check with the managed server WLS_Portlet?
  
  Thks

  Is not used for the KDP and no portlets JSR168 portlets PortletRenderRequest?
  If your portlet portlet a regular JSR168 or is it a PDK portlet?

  Can you post (Conteudo.java:52) because maybe you just a mistake their?

• From Oracle Lite, need help

  Hello world
  
  I have an application written in Java that connects to an Oracle 10g server and I want to use the same application on netbooks devices under WinXP. These devices use the application offline and then will synchronize with the DB.
  
  As far as I know, I need Oracle Lite database on mobile devices to get snapshots of database and track changes made in offline mode. I want to know if I need to install the Mobile Server to manage the synchronization of data between the mobile devices and DB.
  
  What I have to develop a web - app to manage the synchronization of the data, or there is an easier way to sinchronize in this case using only the desktop application?
  
  Thanks in advance for your help and sorry for my bad English.

  You want to watch the Win32 applications. There are the API in several programming languages which use the Sync Lite Oracle API to synchronize, or you can simply use the mSync.

• Training material for Oracle AQ

  Hello
  
  Can someone please provide link or documents for Oracle AQ of documents.
  The material is needed to understand the Oracle AQ from scratch, as well as some practical examples
  
  
  Thanks in Advacne
  Nidhi

  Hello Nidhi,

  Just check this

  http://download.Oracle.com/docs/CD/B31017_01/integrate.1013/b28994/adptr_aq.htm#sthref258

• Oracle Lite API to send commands

  Hello
  Did anyone here ever used the Olite API to send commands to devices?
  
  When I send the command 'Install apllication' of MobileManager all platform devices. Sometimes, Mobilemanager crashes for hours, and not all devices receive the order.
  
  So I would like to know if this can be done by Oracle Lite java API and if anyone has examples of sum on how use the Classes oracle.lite.resource.dm. *.
  
  Thank you
  
  JSET

  If you have the mobileserver installed, take a look at it please ORACLE_HOME\Mobile\Server\demos\devmgr\java $ for samples on orders.

• Oracle Lite PPC2003 XScale on Lite 10.3.0.1.0

  Hi all
  
  1. I got a new device which is a XScale processor.
  2. in the Web to Mobile devices-> platforms - Oracle Lite PPc2003 is enabled.
  3 but in the configuration of the mobile customer, I don't see this Xscale platform.
  4 and also in packaging Vizard I do not see a platform called Xscale. But ARMV4 and another pops up.
  
  Any help is appreciated.

  In my view, it has been documented somewhere these applications must be published again for the new platform.

• Need to list of Vendors of Toad® for Oracle Xpert Edition

  Hi all
  
  I need a quick service you guys.
  
  Please let me know the vendors who can provide me with - Toad® for Oracle Xpert Edition version 9.0 or higher.
  
  It will be great if anyone of you could provide me with expected cost as well as the name of the seller if poosible.
  
  Thank you.

  Try CDW or SoftSearch .

• is there an app CSPAN for the AppleTV? Seems reasonable for Apple to provide one as a municipal public service essential.

  is there an app CSPAN for the AppleTV? Seems reasonable for Apple to provide one as a municipal public service essential.

  It is an application provided by C-SPAN, no Apple. Check and see if there is a C-SPAN app in the app store for your iPhone/iPad. You can then use home sharing, if the application permits.

  Good day.

• E-mail from Apple in the preferences (El Capitan) settings is not accepting my password for my email provider, once again?

  E-mail from Apple in the preferences (El Capitan) settings is not accepting my password for my email provider, AGAIN?  This happens with google, aol, etc, etc, etc. The password is never wrong, that it's just something that happens with Apple OS from time to time. Why can't they solve this!  He emerges finally upward, but at the same time, relentless and software Apple alerts does not receive your mail via the mail app which is now linked to the mail, notes, reminders, calendar, etc.  Any thoughts on a fix?  Or should I just kill app Apple mail, once and for all?  So annoying! I now have another 45 minutes on this problem with no resolution!

  This message has ended up in Mountain Lion and is coded for Messages (filter just to see the messages on the Messages (the application))

  I asked to be moved for you.

  

  20:23 on Tuesday. March 1, 2016

   iMac 2.5 Ghz i5 2011 (Mavericks) 10.9
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   a few iPhones and an iPad