From Oracle Lite, need help

Similar Questions

• [Oracle 8i] Need help of a hierarchical query pruning branches

  My problem is that my hierarchical query seems only to cut values that do not meet my criteria, but still includes their children. When my query hits a record that does not meet my criteria, I want it to stop there. I tried including the criteria in just the ' ' a where clause of the query and also put the criteria in clause "connect by" as well, but nothing has been set. Will you please keep in mind that I'm using Oracle 8i, so I can't use some of the "nice" statements for hierarchical queries that they introduced in 9. I'm stuck with "Start With... Connect in "."
  
  I have examples of tables/data I can post if someone needs to see to help me, but to start with, here my current query:
  

  SELECT     *
  FROM     (
            SELECT 
                 LEVEL
            ,     c_bill.comp_part_nbr                     AS     c_part_nbr
            ,     (select c_part.part_desc 
                 FROM part c_part 
                 WHERE c_part.part_nbr=c_bill.comp_part_nbr)     AS     c_part_desc
            ,     (SELECT c_part.part_type 
                 FROM part c_part 
                 WHERE c_part.part_nbr=c_bill.comp_part_nbr)      AS     c_part_type
            ,     c_bill.qty_per                          AS     c_qty_per_p
            ,     c_bill.qty_per_type                     AS     c_qty_per_type
            ,     (SELECT c_part.qty_on_hand                
                 FROM part c_part 
                 WHERE c_part.part_nbr=c_bill.comp_part_nbr)      AS     c_qty_on_hand
            ,     c_bill.oper_nbr                     AS     rqd_at_op
            ,     c_bill.comp_off_adj                     AS     rqd_offset
            ,     c_bill.bom_doc_nbr                     AS     p_part_nbr
            ,     (SELECT p_part.qty_on_hand 
                 FROM part p_part 
                 WHERE p_part.part_nbr=c_bill.bom_doc_nbr)      AS     p_qty_on_hand
            FROM 
                 BILL c_bill 
            WHERE 
                 (
                           (c_bill.status           =      'RL')           
                      AND     (c_bill.view_code     IN      ('M','G'))     
                      AND     (c_bill.end_eff_dt     >      SYSDATE)       
                      AND     (c_bill.begn_eff_dt     <=      SYSDATE)
                 ) 
            START WITH c_bill.bom_doc_nbr=RPAD(?,25)
            CONNECT BY PRIOR c_bill.comp_part_nbr=c_bill.bom_doc_nbr
            AND     c_bill.view_code     IN     ('M','G')     
            AND     c_bill.status          =     'RL'
            AND      c_bill.end_eff_dt     >     SYSDATE
            AND     c_bill.begn_eff_dt     <=     SYSDATE     
       ) a
  WHERE     c_part_type = 'M'

  Hello

  The criterion in the outer query

  c_part_type = 'M'
  

  applies only to the results; You can still get the descendants of these lines in the output. This seems to be the only thing that is not repeated in the CONNECT BY clause.

  If you don't want to repeat the criteria in the WHERE clause and the CONECT BY clause, you can apply them once in a view online.
  The following example works in Oracle 8.1:

  SELECT     LPAD ( ' '
            , 3 * (LEVEL - 1)
            ) || ename          AS iname
  ,     empno
  ,     mgr
  FROM     (     -- Begin in-line view of employees named C-Z
       SELECT     ename
       ,     empno
       ,     mgr
       FROM     scott.emp
       WHERE     ename     >= 'C'
       )     -- End in-line view of employees named C-Z
  START WITH     mgr    IS NULL
  CONNECT BY     mgr    = PRIOR     empno
  ;
  

  Not only is excluded BLAKE, but the descendants of JAMES BLAKE, MARTIN, etc. are excluded, too, without repeating the condition.

  Please, post CREATE TABLE and INSERT statements for some examples of data - just enough to show what is the problem - and the results desired from these data.

• Group By clause in oracle 10g need help

  Hello
  We have a requirement that get the AR details of aging at the customer level. I wrote the following query to retrieve the correct rows at the invoice level. But now I need calculate the sum of the amounts and I show you the invoice and customer level. Could you please help me how can I group by the client.
  
  Here's the query I used
  
  Select ps.org_id
  sobbed. SET_OF_BOOKS_ID
  sobbed. CHART_OF_ACCOUNTS_ID
  gcc. Company of SEGMENT1
  gcc. SEGMENT2 location
  gcc. Department of SEGMENT3
  gcc. SEGMENT4 account
  gcc. Future_1 SEGMENT5
  gcc. SEGMENT6 Future_2
  gcc. SEGMENT7 Future_3
  gcc. CONCATENATED_SEGMENTS gl_cc_concat_kff
  ps.trx_number
  ps.trx_date
  ps.due_date
  ps.invoice_currency_code
  sob.currency_code SOB_Currency_Code
  ps.class
  ps.amount_due_original
  , ps.amount_due_original * nvl (ps.exchange_rate, 1) acctd_amount_due_original
  ps.amount_due_remaining
  ps.acctd_amount_due_remaining
  ps.status
  ps.cust_trx_type_id
  ps.customer_site_use_id
  ps.customer_trx_id
  ps.cash_receipt_id
  ps.gl_date
  rctlda. CODE_COMBINATION_ID
  ps.customer_id
  nvl (ATCM. ATTRIBUTE5, ps. CUSTOMER_ID) End_Customer_Id
  rc.customer_number
  rc2. CUSTOMER_NUMBER Brand_Cust_no
  , round ((sysdate-ps.due_date))
  of gl_sets_of_books ob
  , hr_operating_units or
  ar_payment_schedules_all ps
  ra_customers rc
  ra_cust_trx_line_gl_dist_all rctlda
  gl_code_combinations_kfv gcc
  ra_customer_trx_all ATCM
  ra_customers rc2
  where sob.set_of_books_id = ou.set_of_books_id
  and ou.organization_id = ps.org_id
  and ps.status = 'OP '.
  and ps.org_id is not null
  and ps. CUSTOMER_ID = rc. CUSTOMER_ID
  and ps. CUSTOMER_TRX_ID = rctlda. CUSTOMER_TRX_ID
  and rctlda. ACCOUNT_CLASS = "REC".
  and rctlda.latest_rec_flag = 'Y '.
  and rctlda. CODE_COMBINATION_ID = gcc. CODE_COMBINATION_ID
  and ps. CUSTOMER_TRX_ID = ATCM. CUSTOMER_TRX_ID
  and gcc. CODE_COMBINATION_ID = 39446
  - and ps.trx_number = 1-15O0A8O'
  - and rc. CUSTOMER_NUMBER = 1-10PA5KX'
  and nvl (ATCM. ATTRIBUTE5, ps. CUSTOMER_ID) = rc2. CUSTOMER_ID
  
  Could someone help me how to recover the same columns with sum (ps.amount_due_original) for each client. I tried to use the group by clause, but it gives to new level of the invoice.
  But my req's for each customer the amount of the invoice must be added and it should give the total
  
  Thank you
  THERE

  If you need to have the amount of the invoice for each customer may also need to check the
  CUBE
  http://download.Oracle.com/docs/CD/B28359_01/server.111/b28286/statements_10002.htm#sthref9448
  and example here
  http://download.Oracle.com/docs/CD/B28359_01/server.111/b28286/statements_10002.htm#i2066443

  and ROLLUP
  http://download.Oracle.com/docs/CD/B28359_01/server.111/b28286/statements_10002.htm#sthref9445

  I couldn't keep up with all your SQL statement, or I could rewrite for you once again
  Thank you

  Published by: user9532576 on July 21, 2009 09:24

• Need help on query with decimal places and trailing 0

  Community of Oracle I need help in the following situations:
  
  I received the following query:
  SELECT (SUM ("VALUE1") COUNT ("VALUE2"))
  FROM sometable;
  
  This returns the following results:
  200
  222,5
  
  I want to display as 222.50 222,5 value so I tried ROUND(value,2) but then came to the conclusion that the tour will not show drags me 0.
  So now I tried to_char(value,'9999DD00') and of course he's back 200.00 both 222.50.
  
  Now how to make it conditional so when a number has no decimal place it shows the whole number and when it has a decimal, it shows it in the format to_char(value,'9999DD00')?
  
  I hope I have made my situation and question correctly and I hope a solution.
  
  P. S.
  I need to appear like that since it is an average of the prices of the products
  
  Published by: Jnijman on July 3, 2010 13:06

  You can use CASES and INSTR:

  SQL> with t as ( -- generating sample data:
    2  select 200 col from dual union
    3  select 222.5 from dual
    4  )
    5  --
    6  -- actual query:
    7  --
    8  select col
    9  ,      case
   10           when instr(col, ',') > 0
   11           then to_char(col, '999d00')
   12           else to_char(col, '999' )
   13         end formatted_col
   14  from   t;
  
         COL FORMATT
  ---------- -------
         200  200
       222,5  222,50
  

• Need help with Jheadstart beginner

  Hello

  I'm new on JHeadstart. I need to migrate forms to ADF using JHeadstart oracle and need help. I have the suite version of JDeveloper

  

  According to the guidelines of this version compatibility matrix:http://www.oracle.com/technetwork/developer-tools/jheadstart/jhs-jdev-supportmatrix-084434.html

  I should be using JHeadstart 11.1.1.4 or 11.1.1.5 version

  I had actually installed JHeadstart via Jdeveloper using Hekp-> check for updates navigation and it seems that it has installed Version 11.1.1.3.33 (I don't know. it's what appears in the Index of the JHeadstart Documentation), which is not compatible with my version Jdev

  For this reason, according to the after screen shot, I'm not able to see "JHeadstart Forms2ADF" generator option during the creation of ADF BC.
  

  
  

  
  

  How can I get an older version of JHeadstart, which is compatible to my JDeveloper?

  Help, please!

  
  

  Thank you

  Amit
  

  You need a license to download a full version. The evaluation version includes no Forms2ADF

  http://www.Oracle.com/technetwork/developer-tools/jheadstart/jheadstart-FAQ-085254.html#BM4a

• Need help to install Oracle Business Intelligence 11.1.1 Applications. 7.1

  Hello

  I intend to install some Applications Oracle Business Intelligence 11.1.1.7.1 in my machine. I need some clarification before you install it.

  (1) can I install and run unity of repository on the local computer (that is not a server)?

  (2) don't need an application server for the installation of the Oracle Applications Business Intelligence 11.1.1.7.1?  If so where should I install the server applications or server or in my local computer?

  Thanks in advance

  Here you go...

  (1) can I install and run unity of repository on the local computer (that is not a server)?

  Yes, you can, if you have a database and ongoing running and accessible from your machine.

  (2) don't need an application server for the installation of the Oracle Applications Business Intelligence 11.1.1.7.1?  If so where should I install the server applications or server or in my local computer?

  Yes you need, and it will be good to have it on your machine.

  Before installing, make sure that you have min 4 GB of ram to work actively on OBIEE.

  So useful mark...

  Let me know if you need help with the installation.

• Need help for query flat_file type clobdata oracle table data.

  Hi Sir,
  
  I need help to query oracle table flat file data having given clob type.
  

  Oracle Version:
  
  Oracle Database 10g Express Edition Release 10.2.0.1.0 - Product
  PL/SQL Release 10.2.0.1.0 - Production
  "CORE     10.2.0.1.0     Production"
  TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
  NLSRTL Version 10.2.0.1.0 - Production
  
  
  
  Source table
  
    CREATE TABLE order_details 
     (     QUEUE_SEQNUM NUMBER(10,0) NOT NULL ENABLE, 
       LINE_SEQNUM NUMBER(10,0) NOT NULL ENABLE, 
       CHAR_DATA CLOB, 
       OPTIMISTIC_LOCK_KEY NUMBER(20,0)
     ) 

  COLUMN FOR CHAR_DATA FLAT_FILE
  

  EU,6067AT,AT10,000000402004,NexiumGERDManagementProject,Z435,,ZZ29,NIS-GOLD,AT
  EU,6067AT,AT10,000000402038,NIS-OEU-ARI-2007/1,Z450,,ZZ29,NIS-OEU-ARI-2007/1,AT
  EU,6067AT,AT10,000000402039,SymbicortNISinCOPD,Z450,,ZZ29,NIS-REU-DUM-2007/1,AT
  EU,6067AT,AT10,000000402040,D1443L00044SeroquelXRRuby,Z450,,ZZ29,D1443L00044,AT
  EU,6067AT,AT10,000000402041,NIS-GEU-DUM-2008/1,Z450,,ZZ29,NIS-GEU-DUM-2008/1,AT
  EU,6067AT,AT10,000000402042,SonstigeAktivitätenLCM,Z450,,ZZ29,.,AT
  EU,6067AT,AT10,000000402134,D1680L00002Saxagliptin,Z450,,ZZ29,D1680L00002,AT
  EU,6067AT,AT10,000000402199,SeroquelWaveNIS,Z450,,ZZ29,NIS-NEU-DUM-2009/1,AT
  EU,6067AT,AT10,000000402313,SeroquelExtra(D1443L00082),Z450,,ZZ29,D1443L00082,AT
  EU,6067AT,AT10,000000402517,AtlanticD5130L00006(AZD6140),Z450,,ZZ29,D5130L00006,AT
  EU,6067AT,AT10,000000554494,ArimidexSt.Gallen(13+2),Z142,,ZZ09,,AT
  EU,6067AT,AT10,000000554495,ArimidexASCO(5delegates),Z142,,ZZ09,,AT
  EU,6067AT,AT10,000000554496,ArimidexSanAntonio6delegates,Z142,,ZZ09,,AT
  EU,6067AT,AT10,000000554497,ArimidexBreastCancerSummit(13+2),Z130,,ZZ09,,AT
  EU,6067AT,AT10,000000554498,ArimidexEIH(15delegates),Z130,,ZZ09,,AT
  EU,6067AT,AT10,000000554499,ArimidexNIFA(200delegates),Z135,,ZZ09,,AT
  EU,6067AT,AT10,000000554500,ArimidexNIFAworkshops(8x25),Z135,,ZZ09,,AT
  EU,6067AT,AT10,000000554501,ArimidexPraktischeGyn.Fortbildung,Z147,,ZZ09,,AT
  EU,6067AT,AT10,000000554502,ArimidexAGO,Z147,,ZZ09,,AT
  EU,6067AT,AT10,000000554503,ArimidexHämato/OnkologieKongress,Z147,,ZZ09,,AT
  EU,6067AT,AT10,000000554504,ARIMIDEXGYNäKOLOGENKONGRESS,Z147,,ZZ09,,AT
  EU,6067AT,AT10,000000554505,ArimidexChirurgenkongress,Z147,,ZZ09,,AT

  EXPECTED RESULTS:
  

  AFFIRM_CODE COMPANY_CODE INTERNAL_ORDER_CODE INTERNAL_ORDER_DESC ENIGMA_ACTIVITY             SUB_ACTIVITY_CODE IN_AFF_IND ORDER_TYPE EXTERNAL_ORDER COUNTRY        
  EU          6067AT       AT10                 000000402004       NEXIUMGERDMANAGEMENTPROJECT     Z435           NULL        ZZ29       NIS-GOLD        AT             
  EU          6068AT       AT11                 000000402005       NEXIUMGERDMANAGEMENTPROJECT     Z435           NULL        ZZ29       NIS-GOLD        AT             

  Sorry, my bad. Without database at hand, I'll try 'baby steps' (borrowed from Frank) so you don't confuse it with errors that I might add (happens far too often already, but at least you won't "swallow" as forum members think is one of the main goals of this fighter - help her learn - providing not only the proverbial fish.)
  Search the Forum - your problem is one of its best sellers. Watching {message identifier: = 10694602} ("split string into" was the key word used in research) you can try something as

  select table_row,
         level clob_row,
         regexp_substr(char_data,'[^' || chr(13) || chr(10) || ']+',1,level) the_line
    from (select to_char(queue_seqnum)||':'||to_char(line_seqnum) table_row,
                 char_data
            from order_details
         )
   connect by regexp_substr(char_data,'[^' || chr(13) || chr(10) || ']+',1,level) is not null
          and prior char_data = char_data
          and prior table_row = table_row
          and prior sys_guid() is not null
  

  to get all the s the_lineall CLOB and after that the use of the example even to get your columns of each the_line.

  Concerning

  Etbin

  Edited by: Etbin on 3.2.2013 09:01

  .. .but I m connected to do things according to the instructions, I can't do something.

  Used to happen to me too and I did as told to the but only after explaining any disadvantages, I was aware of in time. The last sentence is usually: "O.K. now be just and Don't come back with that kind of thing when it turns out that this isn't the right thing."
  rp0428 post - something to remember.

• Trying to get SQL to Oracle via VBScript - help needed connection

  Hello
  I really need help please because I am new to VBScript and TNS connections and all this stuff is complicated.
  I'm trying to make a connection with one of our Oracle servers and to extract some database through SQL commands, but after trying for a few days, I'm stumped.
  
  Here are the details, and I hope someone can advise me in simple language on where I'm wrong.
  
  
  The I'm trying to connect from is an Essbase server that already has an ODBC connection to the Oracle Server installation in the ODBC data source administrator. The driver that I see in the ODBC data source administrator is 'Oracle in OraClient10g_home1' and a "SQL Sever" driver as well as some drivers OEM MEARNT.
  The tnsnames.ora has the information for the Oracle server and I can't tnsping to it successfully.
  Navigation around the web, I tried a few methods to connect:
  
  
  "Driver = {Microsoft ODBC for Oracle};" DBQ = ABCD; UID = username; Pwd = PASSWORD; »
  I get the error message:
  "Provider is not specified and there is no designated default provider."
  
  
  I understand that I don't have the Microsoft ODBC for Oracle installed driver, do not know if we need if we have the Oracle in OraClient10g_home1 driver and have a connection established. So I tried:
  
  
  "Driver = {Oracle in OraClient10g_home1}; DBQ = ABCD; UID = username; Pwd = PASSWORD; »
  
  Once again... "Provider is not specified and there is no designated default provider."
  
  I also tried another suggested method:
  
  
  Dim strCon
  
  strCon = "Driver = {Oracle in OraClient10g_home1}"; "." & _
  "CONNECTSTRING = (DESCRIPTION ="& _.
  "(ADDRESS =(PROTOCOL=TCP)"& _
  "(HOST = EssbaseServer)(PORT=1592))" & _
  "(CONNECT_DATA = (SERVICE_NAME = ABCD))); UID = LOGIN; pwd = PASSWORD; »
  
  Ollivier Dim: Set Ocón = WScript.CreateObject ("ADODB. Connection")
  Dim oRs: Set oRs = WScript.CreateObject ("ADODB. Recordset')
  oCon.Open strCon
  oCon.Close
  
  Set oRs = Nothing
  Define Ocón = Nothing
  Again same error message:
  Provider is not specified and there is no designated default provider.
  
  This leads me to think that maybe I need to have the Microsoft ODBC for Oracle drivers installed on the server. Maybe I need to fix my script differently and am totally done badly. Any help please? If you think I need the driver could you please explain why and how this works if I can put forward for my argument to install it on the server.
  
  Thank you very much

  I'm not an expert in vbscript, but a few times I used ADODB to connect to Oracle with success. Something like

  'Database connection info
  set Conn = CreateObject("ADODB.connection")
  Conn.ConnectionTimeout = 30
  Conn.CommandTimeout = 30
  if dbType = "oracle" then
       conn.open("Provider=MSDAORA.1;User ID=" & dbUser & ";Password=" & dbPass & ";Data Source=" & dbName & ";Persist Security Info=False")
  elseif dbType = "sqlserver" then
       conn.open("Driver={SQL Server};Server=" & dbHost & ";Database=" & dbName & ";Uid=" & dbUser & ";Pwd=" & dbPass & ";")
  elseif dbType = "mysql" then
       conn.open("DRIVER={MySQL ODBC 3.51 Driver}; SERVER=" & dbHost & ";PORT=3306;DATABASE=" & dbName & "; UID=" & dbUser & "; PASSWORD=" & dbPass & "; OPTION=3")
  end if
  

  These variables are defined as

  dbType = "oracle"                 ' Valid values: "oracle", "sqlserver", "mysql"
  dbHost = "mrs-db-00021.abc-xyz.com"                 ' Hostname of the database server
  dbName = "LDBS_PRD"                 ' Name of the database/SID
  dbUser = "myuser"               ' Name of the user
  dbPass = "xxxx2212"               ' Password of the above-named user
  

• photos were deleted from my phone? !!! need help urgent pls

  So I'll start from the beginning.

  So at the beginning I had 5200 pictures and everything was fine, except that I couldn't take any pictures on Snapchat. So I decided to delete some pictures. Except sometimes just deleted photos would return as 2 seconds. And sometimes I would say 5 photos selected, but I couldn't see anything selected? Or I have to press SELECT again and again.

  at least one forward a few hours and I received on my phone, except that now it says I have only 3600 pictures! I lost a few photos, especially those previously on my phone, then some of the pictures I deleted months ago as last year are back. And I have pictures on my recently removed, but not the ones I lost!

  I feel that my phone is somehow back in time or something.

  And I lost a few photos of a wedding and I regret totally stayed so much (((pls est de toute façon??))

  also, I need help using http://www.ipad-converters.org/recover-photos-from-iphone/ this type also.

  Hello

  When you recharge an iPhone / iPad, it will be saved up to iCloud on wifi you

  Restore the original configuration.

  When configuring back it will ask you if you want to use iCloud backup say yes

  Use the backup of a time where you had all your photos.

  See you soon

  Brian

• Hey, need help. I get this in my iPhone that 'there is a problem of billing with a previous purchase. Please update your payment method"in any way I can remove my visa card from iTunes

  Hey, need help. I get this in my iPhone that 'there is a problem of billing with a previous purchase. Please update your payment method"anyway I can remove my visa card from iTunes?

  You must pay your debt first.

• I started my system, unfortunately I forgot to backup all bookmarks on firefox, how could I get these bookmarks in firefox need help from your server

  Hi, friends
  I started my system, unfortunately I forgot to backup all bookmarks on Firefox, now how do I get these bookmarks in Firefox need help from your server

  Start or restart to activate something, or restart.

  Did you format your hard drive or re-install Windows?

  If you did a reinstall of Windows, look for a folder.
  It can be called old windows. Check the instructions that you were given.

• Hi, I recently bought numbers in order to create a commercial newspaper. I'm the pen and paper. I need help to create a formula. A purchase column determines if the entry price column is subtracted from the price of output column or output subtracted

  Hi, I recently bought numbers in order to create a commercial newspaper. I'm the pen and paper. I need help to create a formula. A purchase column; Determines if the entry price column is subtracted from the price of output column (buy) or subtracted from (Sell) entry exit. Thank you for your help

  Hi B',.

  Buying and selling in column B

  Price of entry in column c.

  Exit in column D price

  Formula (and outcome) in column E

  If the column will B always contained 'Buy' or 'Sell', it works. It is default to a calculation of 'sell' if sale or has been specified.

  E2: = IF (B = "Buy", D - C, C - D)

  If you want to delay the calculation until the amounts entered in C and D, use this version:

  E2: = IF (OR (LEN (C) < 1, LEN (D) < 1,"", IF (B = "Buy", D - C, C - D) ")

  If you want to delay the calculation until all three ducks are on a line (B contains buy or sell, C and D contain both data), use this version:

  E2: = IF (OR (LEN (C) < 1, LEN (D) < 1,"", IF (B = "Buy", D - C, IF(B="Sell",C-D,) "" ")))

  Third version used in this table.

  

  Kind regards

  Barry

• HP Pavilion - 15 t-ab100 CTO: need help from Windows 7 drivers

  I was faced with a clean install of windows 7 on my laptop for 2 days now. I'm going to sleep after I post this so feel free to help others who are online, but if no one else needs help I have little material ID's which need pilots. I would be very grateful, because it is the last step, I need to finish my installation.
  
  Ethernet controller:
  
  PCI\VEN_10EC & DEV_8136 & SUBSYS_80A4103C & REV_0A
  PCI\VEN_10EC & DEV_8136 & SUBSYS_80A4103C
  PCI\VEN_10EC & DEV_8136 & CC_020000
  PCI\VEN_10EC & DEV_8136 & CC_0200
  
  ICP data and acquisition and signal processing controller
  
  PCI\VEN_8086 & DEV_9D31 & SUBSYS_80A4103C & REV_21
  PCI\VEN_8086 & DEV_9D31 & SUBSYS_80A4103C
  PCI\VEN_8086 & DEV_9D31 & CC_118000
  PCI\VEN_8086 & DEV_9D31 & CC_1180
  
  ICP data and acquisition and signal processing controller
  
  PCI\VEN_8086 & DEV_1903 & SUBSYS_80A4103C & REV_08
  PCI\VEN_8086 & DEV_1903 & SUBSYS_80A4103C
  PCI\VEN_8086 & DEV_1903 & CC_118000
  PCI\VEN_8086 & DEV_1903 & CC_1180
  
  PCI device
  
  PCI\VEN_10EC & DEV_522A & SUBSYS_80A4103C & REV_01
  PCI\VEN_10EC & DEV_522A & SUBSYS_80A4103C
  PCI\VEN_10EC & DEV_522A & CC_FF0000
  PCI\VEN_10EC & DEV_522A & CC_FF00
  
  PCI memory controller
  
  PCI\VEN_8086 & DEV_9D21 & SUBSYS_80A4103C & REV_21
  PCI\VEN_8086 & DEV_9D21 & SUBSYS_80A4103C
  PCI\VEN_8086 & DEV_9D21 & CC_058000
  PCI\VEN_8086 & DEV_9D21 & CC_0580
  
  PCI simple communication controller
  
  PCI\VEN_8086 & DEV_9D3A & SUBSYS_80A4103C & REV_21
  PCI\VEN_8086 & DEV_9D3A & SUBSYS_80A4103C
  PCI\VEN_8086 & DEV_9D3A & CC_078000
  PCI\VEN_8086 & DEV_9D3A & CC_0780
  
  SM bus controller
  
  PCI\VEN_8086 & DEV_9D23 & SUBSYS_80A4103C & REV_21
  PCI\VEN_8086 & DEV_9D23 & SUBSYS_80A4103C
  PCI\VEN_8086 & DEV_9D23 & CC_0C0500
  PCI\VEN_8086 & DEV_9D23 & CC_0C05
  
  It is the last of the drivers I need. It was certainly a pain get here without any connectivity USB wireless drivers as well as figuring out how to attach the USB 3.0 drivers to my installer of windows 7, but it's in the past now. Thank you much in advance.

  Hello:

  You can use the W7 x 64 drivers and the software of this model to yours except the BIOS and firmware files.

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-15-ab000-notebook-PC-series/7771366/model/8542715

  The drivers you need for the ID you posted in the order that you posted the...

  This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

  File name: sp71191.exe

  ICP data and acquisition and signal processing controller x 2:

  This package contains the driver which allows Intel platform dynamic and thermal firmware setting. Intel platform dynamic and thermal environment information system temperature and power use for the thermal protection of the system to work properly. This package is provided for the laptop models running a supported operating system.

  File name: sp71185.exe

  This package contains the driver that allows the Realtek card reader in laptop models running a supported operating system. The card reader allows users to read or write to removable storage cards supported, which are typically used in digital cameras, digital music players and cell phones.

  File name: sp71189.exe

  PCI memory controller?  Don't know. Can be installed from below driver chipset.

  This package provides the driver Intel Management Engine Interface (MEI) for the notebook models and operating systems. The Intel Management Engine Interface allows communication between the host operating system and the Intel Management Engine firmware.

  File name: sp71183.exe

  SM bus controller: Note: install first this driver and restart.

  This package contains the driver and Intel Chipset Installation Utility for the notebook models and operating systems. This utility allows the operating system to show the correct name for the Intel hardware that is installed in the Microsoft Windows Device Manager.

  File name: sp73543.exe

• I need help to the new photo of my photos from iphoto on El Capitan. Any help would be appreciated.

  I need help to the new photo of my photos from iphoto on El Capitan. Any help would be appreciated.

  To migrate your iPhoto library to Photos for Mac, drag it in the Photos icon in the Dock.  Photos will read the iPhoto library and create a new library of pictures of him.

  Is your photo library in iPhoto on an external drive? The migration will work that if the external hard drive Mac OS extended (journaled) file system.  If the library is on a disk with a different file system, Ministry of the environment of the library of a correctly formatted disk.

• HP Pavilion Slimline s5 - 1140d: need help with relocation to Windows 7 from Windows 10 Technical Preview

  Hello. I am currently using a Windows 10 Technical Preview in my office and want to install the official version of Windows 10. However, Microsoft has answered me, in order to install the FREE Windows Home 10 fresh new official retail version, I have to go back to the previous version which is Windows 7 then updated via windows update. I tried to check with HP Recovery Manager, but there is no option to return to windows 7. Only it has option to reset the tech 10 preview windows. So I went to the Microsoft website to download the ISO of Windows 7 files to install in flash player, it asks for the product key. And then I entered the key correctly which is stuck on my Windows product key sticker desktop. But he didn't and the message that this is a key of the OS preinstalled, contact your manufacturer. Now, I'm stuck with how to return to Windows 7! I need help ASAP! Thank you. I did backup and everything so much already.

  Yes, M$ makes it seem as if the OEM product key will work, but it does not work. There are choices and it depends on how you wish to just to proceed.

  As the model number is not included in the post, it is only a general Council, here.  You can make one of these to restore Windows 7 to useful step.

  (1) reinstall Windows from the recovery disks set - if you do not, order of HP for a low price ~ $ 25 - $30 US

  (2) check if the recovery Partition (usually D :) there is and run recovery from that)

  3) reinstall using Winows 7 retail disc and allows to activate the COA key

  (4) buy 10 Windows and install