JavaScript added with advanced actions does not run in LMS

Similar Questions

• Dictionary of Cambridge Advanced Learner does not run on windows 7 os.

  Dictionary of Cambridge Advanced Learner does not run on windows 7 os.

  What are the 'system requirements' for this software?

  Have you tried right clicking on the shortcut to the program or the .exe and select "Run As Administrator"?  Perform, even if your user name is an administrator.

  Try right-clicking on the real Setup.exe when you are installing the program and selecting the option "Run As Administrator"?  Perform, even if your user name is an administrator.

  Make older programs in this version of Windows (Windows 7)
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Help with Windows 7 compatibility issues
  http://Windows.Microsoft.com/en-us/Windows7/help/compatibility

  Windows 7 Compatibility Center
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

• Hide advanced action does not work after that triggered the effect

  I have a pretty simple step action that does the following:

  Hide banner

  Apply motion effect to 3 SmartShape from right to left

  Cache: SmartShape3

  
  SmartShape 3 is essentially half a rectangle rounded, which acts as a banner with text. At the beginning of the slide, it is hidden and sitting almost out of the scene. When you click a button, it does the following:

  See the banner

  Show: SmartShape3

  Applies the effect of movement from left to right to SmartShape

  This gives the illusion that it slides in from the left. The reason why I had it sat a little on the scene at the beginning, is that the effect is slow, so this makes it speed up as it has less distance to travel.

  The idea is the action above in blue is triggered and the banner slide from the left on the stage. Another button is pressed and the Red action is triggered sliding off the stage. But once the motion effect has been run, it does not seem to hide, leave the end of the rounded rectangle visible on the stage.

  I tried to adjust the break lines in the buttons that trigger these actions further pushing them to the bottom of the timeline, but it has no effect. I actually expected to start the path and then hide the shape so fast, that you wouldn't see in fact a large part of the effect as when stocks advanced spear they are super fast.

  Am I missing something or is this just a limitation with effects using advanced Actions?

  You have a misunderstanding about the actions. All orders in a fast action are executed in sequence, but immediately. The effects also have a duration, you don't say how long you have applied.  Can you post a screenshot of the timeline? Have you checked the length of the path, is it enough? You do this using the same temporal effects. BTW, I often apply such an effect using micronavigation instead of applying it. In my last blog, you can see an example:

  More in a... hyperlink - drop-down Menu - Captivate blog

• Captivate 6 - Advanced action does not work in the project?

  Hello

  I use 6 Captivate. In my project I have a common slide2 which is called when clicking on the two different buttons (C1 and C2). Slide 2 contains several objects, saying Text1, text 2, 1 button, and Button2.

  Slide 5 I have a C1, I defined the on success action: execute advanced actions

  Script: If CPIntoCurrent Slide is equal to 5

  Action:

  Go to slide 2

  See the Text1

  See the Button1

  Hide Text2

  See the Button2

  Similar action has been set to C2 (slide 8) redirecting to slide 2 showing the Text2 and Button2, hiding other objects.

  These scripts where works fine, until I installed a patch on the adobe site. The patch was intended to display the video correctly in the PDF when selected the option display the table of contents.

  But unfortunately he's completely unbalanced the script of existing projects. I also tried to uninstall completely and fresh install Adobe Captivate, but not luck .

  Help, please.

  @Rod and with a concern for users of later versions (I'm not sure 6, this version did more) 6.

  It is perfectly possible to show/hide objects of an 'Advanced' action (not with a simple gesture) that is running on another slide of the slide corresponding to the object. I am certain about it for versions 7 and 8. I have not been much about 6 blogging and was bit sloppy on this release to keep track of all the changes. If you don't believe me (what happens in these forums), CP8 users take a look at the example file Cloudair included with this release: the action advanced in the first slide shows/hides objects anywhere in the file based on the information of the new cpInfoGeoLocation of system variables.

  Rod, I see you post this comment often, I just wanted to add these details. As I explained that I don't know when this change occurred (6.1 is my suspicion, but cannot test). In CP5 you could hide objects that have been timed for the rest of the project on a slide different than its original location. Since 5.5, you might also show this type of object.

  Lieve

• slide/advanced action does not

  Hello

  I am currently using Captivate 6 and I setup a project that has a timer on the question slide 1st and then I implemented a tip action so when then the timer stops it will jump to the slide results otherwise it will continue on the project.
  Here is my Advanced action.

  

  The timer variable is v_time that I installed on time and created in the variables.

  I put each slide (excluding the first slide of the question and the results slide) with the topic fast action on the entrance and exit of the slide.

  It's used to work when I tested published in the web browser. I have a copy of one I published in January that works but now for some reason it does not work.

  I think there is a problem with the action of jumping to drag, but I'm not 100% sure.

  I tried to recreate a new project with the same tip action, but it still doesn't work.

  I'm stuck and feel I'm wasting my time. I spent 3 days on this and I'm ripping my hair out.

  Help, please!

  Thanks in advance

  Kim

  Kim, what event you attach the advanced action? If you use the 'old' included with CP clock widget (exist also in previous versions), it has no events, will only change the value of the variable associated user. You have action by another event like a drag event (enter, leaving). You have only a message pops up when the time has elapsed, does not prevent the user to answer the question.

  Second question: what version are you using? Associate you the variable v_time in the properties of the Widget? Did you type the exact "v_time" name, because there is a problem with the timer in 6.0.1 widget, which prevents the seizure of some characters. Maybe it's the issue that you are facing now. You must be sure that the correct name is linked and that the variable exists. Lastly but not least, the values of the variable associated with 6 are now 'true' and 'false', not 0 or 1. I just checked the workflow in this way with the widget timer with 6.0 (have another newer version on 6.1):

  • created a user Vtime variable (because these characters are accepted in the properties of the Widget, no respect underscores and capital V)
  • put the clock on the first question slide widget, timed for the rest of the project, countdown with message and associated Vtime
  • created an advanced action conditional like yours, but with true as a literal value; This action will be triggered by each event on enter for all the slides in question except first

  "For the rest of the project" is the timer? Last tip: never use submit all the with the clock widget, because this feature parce que cette fonctionnalite desactivera will disable jump auto everything.

  Lilybiri

• JavaScript in Captivate 9 project does not run

  I tried for hours to get little JavaScript inside an Adobe Captivate 9 (published in SWF and HTML5), deployed to a web server public project, to run. For help troubleshooting, I wrapped in various stages of the script with console.log ("status"); and even those who are not running.

  A demonstration project file is located here: https://dl.dropboxusercontent.com/u/6787201/Test%20Interaction%20Data%20HTML5/Test-Interac tion - Data .cptx

  If you look at the JavaScript window, you will notice there is a function call to sendInteractionData();

  This is a custom function to trigger the data in various Captivate variables in a Google spreadsheet, I wrote. It is contained in the index.html page I change after publication. I tested this feature and it works when the values are explicitly defined and sendInteractionData() is called from a static web site... but when it is embedded in the code JavaScript of Captivate, no luck.

  If you are interested, here is the code I have insert to support the sendInteractionData() function:

  Configuration section

  Paste the URL of the WEB service (obtained after you run the command POST > DEPLOY AS WEB APP) in the variable below!

  var WebServiceURL = "mywebserviceurl";

  Do not edit below this line, unless you intend to change the inner workings of the script

  Declaring variables

  var FirstName;

  var name;

  var Email;

  var attribute;

  Function to send data to interaction in the Google spreadsheet. This function must be called by the Captivate player after setting the variables above.

  function sendInteractionData() {}

  Get and set the relevant data from the Captivate player

  FirstName = window.cpAPIInterface.getVariableValue('cpFirstName');

  LastName = window.cpAPIInterface.getVariableValue('cpLastName');

  Email = window.cpAPIInterface.getVariableValue ('cpEmail');

  Attribute = window.cpAPIInterface.getVariableValue ('cpAttribute');

  Send the data to the Google map via AJAX call

  request = $.ajax({)

  URL: WebServiceURL,

  type: 'post',

  data: "FirstName =" + FirstName + "& LastName =" + LastName + "& Email = ' + Email + ' & attribute ="+ attribute.

  });

  Reminder Manager who will be called to success

  Request.Done (function (response, textStatus, jqXHR) {}

  Save a message to the console

  Console.log ("wrote interaction data sheet: FirstName =" + FirstName + "& LastName =" + LastName + "& Email =" + Email + "& attribute =" + attribute + "/ / Message: success!");

  });

  Reminder Manager who will be called if an error occurs

  Request.Fail (function (jqXHR, textStatus, errorThrown) {}

  Logs the error in the console

  Console.Error)

  "Interaction data could not be saved: FirstName =" + FirstName + "& LastName =" + LastName + "& Email = ' + Email + ' & attribute = ' + attribute + ' / / The following error occurred: ' +"

  textStatus, errorThrown

  );

  });

  }

  PS - declaration of a Google spreadsheet should really be standard features now...

  Thanks for your help.

  You really use the listener attached to the window module ready event to ensure that the API is present.

  var interfaceObj, eventEmitterObj;

  window.addEventListener ("moduleReadyEvent", function (e)
  {
  interfaceObj = e.Data;
  eventEmitterObj = interfaceObj.getEventEmitter ();
  initializeEventListeners();
  });

  function initializeEventListeners()

  {

  If (interfaceObj)

  {

  If (eventEmitterObj)

  {

  window.cpAPIEventEmitter.addEventListener ("CPAPI_VARIABLEVALUECHANGED", function)

  {

  sendInteractionData(); }, 'cpAttribute '.

  );

  }

  }

  }

• Audio tour on first visit to several slides except for the first of the slides advanced action does not

  I have 3 different slides in a project who have advanced actions to stream audio on first visit only. When I saw the project, the tip action works only once. Who ever these 3 slides I play first audio aura on the first visit, but the other 2 do not play audio at all. Is it possible that they do not interfere with each other?

  A tip action that I use is less and the others are the same but with different audio files

  

  You need a variable to different entry for each slide.

  v_entry1, v_entry2 and so on.

• Execute advanced action does not work in Captivate 9. Help, please!

  Hello

  I created a simple questionnaire and use to execute advanced action if students take the test, a new slide is displayed. To fail back to the quiz. Here is the screenshot of what I put in place. I think I followed the correct instructions, but whenever I tried it in preview mode, it doesn't. After the last slide in the quiz, he continued to go to the next slide. Thank you!

  

  

  You choose the wrong system variable. I guess you want to check the score, not the maximum score?

  Use cpQuizInfoPointsscored or cpInfoPercentage. Here is another link where you can download a descriptive table with all system variables:

  System variables in Captivate 8/9 - Captivate blog

• Conditional advanced Actions does not work

  Hello - I've implemented an advanced conditional action and it apparently has a bug in it, but I can't understand what the bug is. With this slide, the user is asked to enter a letter in each four text entry areas and if all the answers are correct, you will jump to a slide, and if one of these four is incorrect then you will go to another slide.  What is happening is that the conditional formatting is respecting the criteria custom of the last two - input-box 14 and 15 (they both have reason to slide right) but it seems not dealing with what you enter in the areas of two first text TEB-12 and 13, you are always taken to the 'right' instead of 'else' slide slide Anyone know what I did wrong?  Thank you!

  

  

  Why didn't you just four TEBs post the entries and if it is correct, pass a value to a variable. (success increment $$boxes$ $ 1)

  You can define a conditional that checks this variable for the correct number. (if $$boxes$ $ = 4, pageX goto)

• a preparation free gata with GK Publications cd does not run on windows 7 Home Basic.

  A cd of free door preparation with GK Publications does not run on windows 7 Home Basic.

  I have buyed a book for the preparation of the door named GK Department with a cd inside, it includes the series of door documents test to practice. But it is to create an error message problem showing that Microsoft.jet.OLEDB.4.0' is not regestered on the local computer.    Please sort out the problem as soon as possible.

  Hi preyashi,

  Thanks for posting your question in the Microsoft community forum!

  I understand that you are having problems running a program from a CD on your computer. I'll help you solve the problem. To be able to understand the question in a better way, I would like to ask you a few questions.

  (1) did you make any changes before the show?

  (2) you are able to run the other Setup program on your computer?

  Senario 1:

  See if it is compatible with Windows 7.

  If this isn't the case, you could try installing in compatibility mode for Windows Vista or Windows XP.

  If the program is not compatible, then you try to install and run the program in compatibility mode.

  Use the following steps:

  (1) right click on the program.

  (2) click on Properties.

  (3) click on the tab compatibility.

  (4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.

  Check out the link here: make sure to run older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If compatibility is not successful, then try and run the program compatibility problems:

  1. open the troubleshooting program compatibility Troubleshooter by clicking the Start button.

  Then click on Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under programs, click on run programs for previous versions of Windows.

  2. follow the instructions in the troubleshooting.

  If you are unable to install a program, insert the installation disc for the program and, using the Troubleshoot utility, navigate to the program setup file, usually called Setup.exe, Install.exe, or something similar. This utility is not designed to work on programs that have an .msi file name extension.

  Senario 2:

  The behavior you describe is expected if your application runs in 64-bit mode, all components that use must also be 64-bit. There is no 64-bit Jet OLE DB Provider, so that you get the message as described. You will receive a similar error when you try to connect to a database by using OLE DB or ODBC if there is no 64-bit of the specified OLE DB provider or ODBC driver version.

  This problem occurs only in applications that run in 64-bit mode. Compiling the application so that it works only in 32-bit mode is the current best solution.

  You may need to contact the manufacturer of the program to find out how to set the path target to x 86.

  More information

  32-bit and 64-bit Windows: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/32-bit-and-64-bit-Windows-frequently-asked-questions

  Please let me know the status of the issue. I will be happy to provide you with the additional options that you can use to get the problem resolved in Microsoft Windows.

• HTML5 does not run a tip action?

  I'm having a problem with HTML5 does not appear when I preview the project normally. I have 2 variables which I am tracking. I use them to generate a 'meter' on the slide to get back to the user. When the user makes a choice on the slide, I use an Action shared to increment or decrement the variable. Then I have a tip Action that performs a conditional action on enter displays the correct counter and mask incorrect counters. Then he stops to the slide.

  Here's my problem: it works perfectly when I use the normal preview. However, it does not work when I Preview in HTML5. I decided that if a variable is zero or less, then the advanced action fails to run. So my meters do not respond correctly and the slide break.

  As it works in normal preview, I guess my logic is written correctly.

  Any help?

  Captivate cannot recognize numbers below zero, it's the only advice I can give you a negative number is converted into a positive (-2 will become 2), has nothing to do with the output format. Zero itself is considered the same as an empty variable.

• void VI does not run with the main VI.

  My main and sub VI is attatched.

  danil33 wrote:

  Re: void / VI does not run with the main VI.

  When you start your main program, the Subvi is called and the main VI must wait the Subvi before it can continue. However, the Subvi is not set to open the Panel before, so very probably that it runs in the background for 100 seconds (1000 iteration to 100ms), because no one can press the stop button at the beginning to put an end to the Subvi. Once the Subvi is completed, the last value is returned to the main VI via the output connector and the main VI can process and display this last value. At this point, the main VI stops, because it's done (hopefully you do not "continuous operation").

  Obviously you have some misconceptions of beginners on the stream. Please we tell exactly what you expect the program to do, and we might be able to point in the right direction.

• Windows Media player on my machine does not run some AVI files. How can I check what the problem with AVI files. Files are running in other utilities of free ware

  Windows Media player on my machine does not run some AVI files. How can I check what the problem with AVI files. Files are running in other utilities free ware. Also, windows Explorer does not display dimension and other video related information for the file. Y at - it a tool that can indicate what exactly is the problem with the file.

  Ritu

  Hello

  1. you get any error message?

  2. don't you make changes to the computer before the show?

  Please follow the steps from the link below.

  http://support.Microsoft.com/kb/279242

• I have a new HP Envy with Windows 8 desktop computer that still does not run properly. I rebooted, restored, ran chkdsk, sfc/scannow, uninstall/install update etc...

  I have a new HP Envy with Windows 8 desktop computer that still does not run properly. I have rebooted, restored (im doing this), ran chkdsk, sfc/scannow, malware, virus, uninstall/install etc and my machine wil always do not run for a long time without going through some sort of problem after an hour or two.  Can anyone suggest what to do about this? I read a lot of information online on all the windows 8 and fixes bugs, etc, but anything Microsoft/Windows, which ensures its customers, a hotfix or compesating their customers with software that still works. This isn't a hardware problem, and I can't keep day and bad shooting and trying to fix the day things in?

  Sincerely,
  A client who is a loss for words.
  Here are some problems in no particular order.
  1.) apps to not install it, and/or Windows saying they are when they are in fact not. The fix to install / uninstall, or get on the site of windows directly in general does not, and or does not at all.
  The change permissions 2.) does not work on files that you should be able to access in changing oxnership, permissions, etc.
  3.) Google chrome won't let me access my account of microsoft (or fact rarely) trying to access assistance. But internet Explorer doesn't?
  Randomly will increase from Internet 4.) a previous connection wired to wireless to a reboot.
  5.) my 8 'key' windows was only shown to me after that I have let Windows scan my machine online? Why? I paid for this... I restarted it and it says: service not available (it worked the third attempt which was 1-3 minutes after the initial analysis). Windows only showed my product ID not the key. I know that my victory. 8 was OEM when preinstalled I bought it new, but why didn't we files on it that had nothing to do with activation, appearing on dates for three weeks, or so before I bought it. What is the 'activation of the factory'?
  6 :) Windows Essentials does not hang for a long time, and the troubleshooterprogram of update simply does not work (I had to go to the website to try tp operate, the bluetooth functionality is not good that there is an error.
  7.) windows scan and repair gets stuck at 27% (Im not the only one with this problem).
  8.), avery MS Office 2013 Disappears so often and not easy to reload "we have encountered a problem.
   

  The computer manufacturer is responsible to see that it works properly with Windows 8. It says that it is a new computer I contact HP and make these problems their. If you don't get satisfactory results I turn and look elsewhere for a computer. Hope this helps and if you need another post to help and we will be happy to help you.

  The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it's employees, or any other Member of this forum.

  "When we try to take anything by itself, we find it hitched to everything else in the universe." -John Muir

• first items 12, new installation, serial No. accepted, installed and started again, but does not run. I get the following msg-box: ' LoadLibrary failed with error 126: Das angegebene Modul wurde nicht found.»

  first items 12, new installation, serial No. accepted, installed and started again, but does not run. I get the following msg-box: ' LoadLibrary failed with error 126: Das angegebene Modul wurde nicht found.»   Installation in German on WIN7 64 bit professional, Samsung SSD. What can I do to run this program?

  Jürgen Freund

  First 12 items on Window 7 64-bit. What card card video/graphic fact your computer use - AMD Radeon?

  I found this YouTube video about the error 126 precisely to solve the problem.

  How to fix the ERROR 126 when you open programs OpenGL - YouTube

  The link was provided in an old thread from 2013 here by the ID danneomarre (see post 6 of the next thread)

  LoadLibrary failed with error 126: could not find the necessary

  Please let us know if it worked for you.

  Thank you.

  RTA

  Add on... When everything is OK and work, update the 12 to 12.1 update using Help Menu/implementation of an open project.